Lenovo IdeaTab A1000 Hardware Maintenance Manual
Hide thumbs
Also See for IdeaTab A1000:
- Quick start manual (107 pages) ,
- Important product information manual (28 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Lenovo IdeaTab A1000
Summary of Contents for Lenovo IdeaTab A1000
- Page 1 IdeaTab A1000 Hardware Maintenance Manual...
- Page 2 First Edition (April 2013) © Copyright Lenovo 2013. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.
-
Page 3: Table Of Contents
Checking the internal battery status..21 Related service information .......23 Security ............... 23 Power management .......... 23 Activating/Deactivating the Display..23 Lenovo IdeaTab A1000 .......24 Specifications ............. 24 FRU replacement notices........25 Screw notices..........25 Removing and replacing an FRU....26 1010 SD card and SIM card cover ..... -
Page 4: About This Manual
This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information”... -
Page 5: Safety Information
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 •... -
Page 6: General Safety
Lenovo IdeaTab A1000 Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. -
Page 7: Electrical Safety
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges. - Page 8 Lenovo IdeaTab A1000 Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.
-
Page 9: Safety Inspection Guide
4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. -
Page 10: Handling Devices That Are Sensitive To Electrostatic Discharge
Lenovo IdeaTab A1000 Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. -
Page 11: Safety Notices: Multilingual Translations
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer. - Page 12 Lenovo IdeaTab A1000 Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
- Page 13 Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
- Page 14 Lenovo IdeaTab A1000 Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
- Page 15 Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing.
- Page 16 Lenovo IdeaTab A1000 Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
- Page 17 Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
-
Page 18: Laser Compliance Statement
Lenovo IdeaTab A1000 Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. - Page 19 Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
-
Page 20: Important Service Information
To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://consumersupport.lenovo.com/. 2. Enter a serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software. -
Page 21: Important Notice For Replacing A System Board
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. •... -
Page 22: Important Information About Replacing Rohs Compliant Frus
Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. -
Page 23: General Checkout
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: •... -
Page 24: What To Do First
Lenovo IdeaTab A1000 Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. -
Page 25: Power System Checkout
General checkout Power system checkout To verify a symptom, follow the steps below: 1. Turn off the computer. 2. Remove the battery pack. 3. Connect the AC adapter. 4. Make sure that power is supplied when you turn on the computer. 5. - Page 26 To open the Android Settings screen, do either of the following: – From the main Home screen, touch the Android Settings icon on Lenovo Launch Zone. The Android Settings screen is displayed. – Touch the application icon from the action bar and then touch Settings.
-
Page 27: Related Service Information
Related service information Related service information This chapter presents the following information: • “Security” on page 23 • “Power management” on page 23 Security Security settings include: SCREEN SECURITY, SIM CARD LOCK (3G version only), PASSWORDS, DEVICE ADMINISTRATION and CREDENTIAL STORAGE. -
Page 28: Lenovo Ideatab A1000
• “FRU replacement notices” on page 25 • “Removing and replacing an FRU” on page 26 • “Locations” on page 37 • “Parts list” on page 39 Specifications The following table lists the specifications of the Lenovo IdeaTab A1000: Table 1. Specifications Feature Description Form Factor Size •... -
Page 29: Fru Replacement Notices
This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: •... -
Page 30: Removing And Replacing An Fru
Lenovo IdeaTab A1000 Hardware Maintenance Manual Removing and replacing an FRU This section presents exploded figures with the instructions to indicate how to remove and replace the FRU. Make sure to observe the following general rules: 1. Do not attempt to service any computer unless you have been trained and certified. -
Page 31: 1010 Sd Card And Sim Card Cover
Lenovo IdeaTab A1000 1010 SD card and SIM card cover Figure 1. Removal steps of SD card and SIM card cover Open the SD card cover, remove screw . Open the SIM card cover, remove screw Step Screw (quantity) Color Torque M1.4 ×... -
Page 32: 1020 Back Cover
Lenovo IdeaTab A1000 Hardware Maintenance Manual 1020 Back cover For access, remove this FRU: • “1010 SD card and SIM card cover” on page 27 Figure 2. Removal steps of back cover Open the back cover from the volume button along the device frame with a flat... -
Page 33: 1030 Battery Pack
Lenovo IdeaTab A1000 1030 Battery pack DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. For access, remove these FRUs in order: • “1010 SD card and SIM card cover” on page 27 •... - Page 34 Lenovo IdeaTab A1000 Hardware Maintenance Manual Figure 3. Removal steps of battery pack (continued) Detach the battery connector , insert a flat blade under as shown below and carefully pry out the battery.
-
Page 35: 1040 Micro Sd Card
Lenovo IdeaTab A1000 1040 Micro SD card For access, remove this FRU in order: • “1010 SD card and SIM card cover” on page 27 Figure 4. Removal steps of Micro SD card Remove the Micro SD card from the card slot in the direction shown by arrows... -
Page 36: 1050 System Board
Lenovo IdeaTab A1000 Hardware Maintenance Manual 1050 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. - Page 37 Lenovo IdeaTab A1000 Figure 5. Removal steps of system board Remove two screws Peel off power button board connector starting from as shown below.
- Page 38 Lenovo IdeaTab A1000 Hardware Maintenance Manual Figure 5. Removal steps of system board (continued) Peel off volume button and reset button connector starting from shown below. Peel off vibrator starting from as shown below. Take off Mylar, then detach LCM connector as shown below.
- Page 39 Lenovo IdeaTab A1000 Figure 5. Removal steps of system board (continued) Take off touchpad Mylar, then detach touchpad connector, peel off the touchpad from the system board as shown below. Peel off the earphone jack starting from as shown below.
- Page 40 Lenovo IdeaTab A1000 Hardware Maintenance Manual Figure 5. Removal steps of system board (continued) Remove two screws and then remove the speaker box as shown below. Remove the microphone, and take off the speaker and microphone cable from the front cover as shown below.
-
Page 41: Locations
Lenovo IdeaTab A1000 Locations Front, top and bottom view Front camera Speaker Power button Microphone... -
Page 42: Right-Side And Top View
Lenovo IdeaTab A1000 Hardware Maintenance Manual Right-side and top view Volume button Earphone jack Micro USB... -
Page 43: Parts List
Lenovo IdeaTab A1000 Parts list Notes: • Each FRU is available for all types or models, unless specific types or models are specified. -
Page 44: Notices
The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. -
Page 45: Trademarks
Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are either registered trademarks or trademarks of Lenovo in the United States and/or other countries: ® Lenovo ®...