Checking The Ink Volume; Packing And Shipping The Machine - Brother MFC-J200 Advanced User's Manual
Version 0
Hide thumbs
Also See for MFC-J200:
- Basic user's manual (141 pages) ,
- User manual (127 pages) ,
- Quick setup manual (27 pages)
Table of Contents
Advertisement
Checking the ink volume
You can check the amount of ink that is left in
the cartridge.
(MFC-J200)
a
Press Menu, 1, 3.
b
The LCD shows the ink volume.
c
Press a or b to choose the colour you
want to check.
d
Press Stop/Exit.
(DCP-J100 and DCP-J105)
a
Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 3.Ink Volume.
Press OK.
The LCD shows the ink volume.
BK:-ooooonn+
d
Press a or b to choose the colour you
want to check.
e
Press Stop/Exit.
NOTE
You can check the ink volume from your
computer.
(See Software and Network User's
Guide.)
A
A
A
e
Routine maintenance
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly package your machine. Damage
caused to your machine during transit may
not be covered by your warranty.
The machine should be adequately insured
with the carrier.
IMPORTANT
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noises have stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a
Unplug the machine from the electrical
socket.
b
Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
Then unplug the machine from the
telephone wall socket and take the
telephone line cord out of the machine.
c
Unplug the interface cable from the
machine, if it is connected.
A
A
31
Hide quick links:
Advertisement
Table of Contents
