NEC 2000 PBX User Manual

Series e d-term

Download this manual

FIXED BUTTONS:

FEATURE BUTTON

Feature button activates:

• Feature + 1 = Turns MIC on or off

• Feature + 3 = Selects ringer tone (3 different tones)

CALL HOLD

•

Press Hold, light will flash on held line

•

To retrieve, lift handset and press into flashing line key

EXCLUSIVE HOLD

• Press Hold button twice. Held line will flash on your set. It will be a steady light on sets

that have appearance of same number. Only you are able to retrieve call from hold.

CALL TRANSFER

• Press transfer button, receive interrupted dial tone, dial extension number

NOTE: To announce the call transfer, wait until the called party answers, announce the call and

replace handset.

• If unable to complete transfer, press transfer key again and you will be connected with

your original call. If voice mail is activated, dial 0*. Voice mail will turn off and

automatically return original call to you.

CONFERENCE CALL

• Press transfer button

• Dial second party (internal or external)

• When second party answers, press CONF button.

CALL PARK

• Press transfer button, original party will be placed on hold and you will receive

interrupted dial tone

• Dial **2, a 2 digit code will appear in your display 00-19 (this is the park location)

• To retrieve Call Park from your phone or a remote location, lift handset and dial *2 plus

the two digit park code 00-19, you are connected to the parked call

SAVE AND REPEAT BUTTON

To save a specific number after dialing

• Press Save # button, replace handset

To access saved number

Telephone User Guide

NEC SERIES E D-TERM

FOR NEC 2000 PBX

Page 1 Telephone User Guide NEC SERIES E D-TERM FOR NEC 2000 PBX FIXED BUTTONS: FEATURE BUTTON Feature button activates: • Feature + 1 = Turns MIC on or off • Feature + 3 = Selects ringer tone (3 different tones) CALL HOLD •...
Page 2 • Lift handset, press S & R button, the saved number will be re-dialed LAST NUMBER REDIAL BUTTON • Lift handset, press redial button, then # • The last dialed number will be re-dialed • If the dialed number displayed is not the desired number, press the redial button until the desired number is displayed.
Page 3 OPTIONAL BUTTONS TO ACTIVATE CALL FORWARD NO ANSWER • Lift handset, press CFNA (or dial *6) receive interrupted dial tone • Dial extension number where calls are to forward, receive set tone • Replace handset TO CANCEL CALL FORWARD NO ANSWER •...
Page 4 LCOG: N:\Telecom\User Guides\NECSeries ED-TermMiniGuide for NEC2000.doc Last Saved: Wednesday, November 29, 2006...