hit counter script
Lenovo ThinkStation S30 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkStation S30
  6. Hardware maintenance manual

Lenovo ThinkStation S30 Hardware Maintenance Manual

Lenovo thinkstation s30 workstation hardware maintenance manual
Hide thumbs Also See for ThinkStation S30:
Table of Contents

Advertisement

Quick Links

See also: Reference , User Manual
ThinkStation S30
Hardware Maintenance Manual
Machine Types: 4351 and 4352

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkStation S30

Summary of Contents for Lenovo ThinkStation S30

  • Page 1 ThinkStation S30 Hardware Maintenance Manual Machine Types: 4351 and 4352...
  • Page 2 “Important Safety Information” on page 1 and Appendix B “Notices” on page 125. Sixth Edition (June 2014) © Copyright Lenovo 2012, 2014. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

  • Page 3: Table Of Contents

    ..sequence ....Lenovo Support Web site ..Enabling ErP LPS compliance mode and Deep .
  • Page 4 Index....Replacing the microprocessor ..Replacing the system board ..ThinkStation S30 Hardware Maintenance Manual...

  • Page 5: Chapter 1. About This Manual

    It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information in Chapter 2 “Safety information” on page 3. Chapter 8 “Symptom-to-FRU Index” on page 67 and Chapter 11 “Additional service information” on page 119 are not specific to any machine type.
  • Page 6 ThinkStation S30 Hardware Maintenance Manual...

  • Page 7: Chapter 2. Safety Information

    Observe the following rules when working on electrical equipment. © Copyright Lenovo 2012, 2014...
  • Page 8 (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. – Send another person to get medical aid. ThinkStation S30 Hardware Maintenance Manual...

  • Page 9: Voltage-Selection Switch

    Voltage-selection switch Some computers are equipped with a voltage-selection switch located near the power-cord connection point on the computer and some computers do not have a voltage-selection switch. Before you install your computer or relocate your computer to another country or region, you must be certain that you have matched your computer to the voltage available at your electrical outlet.

  • Page 10: Handling Electrostatic Discharge-Sensitive Devices

    Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: ThinkStation S30 Hardware Maintenance Manual...
  • Page 11 • English • Arabic • Brazilian/Portuguese • Chinese (simplified) • Chinese (traditional) • French • German • Hebrew • Italian • Korean • Spanish DANGER Electrical current from power, telephone and communication cables is hazardous. To avoid a shock hazard: •...
  • Page 12 The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. ThinkStation S30 Hardware Maintenance Manual...
  • Page 13 Chapter 2 Safety information...
  • Page 14 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ThinkStation S30 Hardware Maintenance Manual...
  • Page 15 PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: • Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. •...
  • Page 16 O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação. ThinkStation S30 Hardware Maintenance Manual...
  • Page 17 Chapter 2 Safety information...
  • Page 18 ThinkStation S30 Hardware Maintenance Manual...
  • Page 19 Chapter 2 Safety information...
  • Page 20 (sauf instruction contraire mentionnée dans les procédures d'installation et de configuration). • Lorsque vous installez, que vous déplacez, ou que vous manipulez le présent produit ou des périphériques qui lui sont raccordés, reportez-vous aux instructions ci-dessous pour connecter et déconnecter les différents cordons. ThinkStation S30 Hardware Maintenance Manual...
  • Page 21 Connexion Déconnexion 1. Mettez les unités HORS TENSION. 1. Mettez les unités HORS TENSION. 2. Commencez par brancher tous les cordons sur les 2. Débranchez les cordons d'alimentation des prises. unités. 3. Débranchez les câbles d'interface des connecteurs. 3. Branchez les câbles d'interface sur des connecteurs. 4.
  • Page 22 Schutzkontakt anschließen. • Die Signalkabel nach Möglichkeit einhändig anschließen oder lösen, um einen Stromschlag durch Berühren von Oberflächen mit unterschiedlichem elektrischem Potenzial zu vermeiden. • Geräte niemals einschalten, wenn Hinweise auf Feuer, Wasser oder Gebäudeschäden vorliegen. ThinkStation S30 Hardware Maintenance Manual...
  • Page 23 • Die Verbindung zu den angeschlossenen Netzkabeln, Telekommunikationssystemen, Netzwerken und Modems ist vor dem Öffnen des Gehäuses zu unterbrechen, sofern in den Installations- und Konfigurationsprozeduren keine anders lautenden Anweisungen enthalten sind. • Zum Installieren, Transportieren und Öffnen der Abdeckungen des Computers oder der angeschlossenen Einheiten die Kabel gemäß...
  • Page 24 Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterbrechen, müssen alle zum Gerät führenden Netzkabel vom Netz getrennt werden. ThinkStation S30 Hardware Maintenance Manual...
  • Page 25 Chapter 2 Safety information...
  • Page 26 • Non collegare o scollegare qualsiasi cavo oppure effettuare l'installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. • Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra. ThinkStation S30 Hardware Maintenance Manual...
  • Page 27 • Collegare alle prese elettriche appropriate tutte le apparecchiature che verranno utilizzate per questo prodotto. • Se possibile, utilizzare solo una mano per collegare o scollegare i cavi di segnale. • Non accendere assolutamente apparecchiature in presenza di incendi, perdite d'acqua o danno strutturale.
  • Page 28 Il pulsante di controllo dell'alimentazione presente sull'unità e l'interruttore dell'alimentatore non disattivano l'alimentazione corrente fornita all'unità. E' possibile che l'unità disponga di più cavi di alimentazione. Per disattivare l'alimentazione dall'unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione. ThinkStation S30 Hardware Maintenance Manual...
  • Page 29 Chapter 2 Safety information...
  • Page 30 • Cualquier equipo que se conecte a este producto también debe conectarse a tomas de corriente debidamente cableadas. • Siempre que sea posible, utilice una sola mano para conectar o desconectar los cables de señal. • No encienda nunca un equipo cuando hay señales de fuego, agua o daños estructurales. ThinkStation S30 Hardware Maintenance Manual...
  • Page 31 • Desconecte los cables de alimentación, los sistemas de telecomunicaciones, las redes y los módems conectados antes de abrir las cubiertas de los dispositivos, a menos que se indique lo contrario en los procedimientos de instalación y configuración. • Conecte y desconecte los cables, como se describe en la tabla siguiente, cuando instale, mueva o abra las cubiertas de este producto o de los dispositivos conectados.
  • Page 32 Además, el dispositivo podría tener más de un cable de alimentación. Para suprimir toda la corriente eléctrica del dispositivo, asegúrese de que todos los cables de alimentación estén desconectados de la toma de corriente. ThinkStation S30 Hardware Maintenance Manual...

  • Page 33: Chapter 3. General Information

    Maximum: 240 V ac Input frequency range: 50 to 60 Hz Lenovo programs Your computer comes with Lenovo programs to help you work more easily and securely. Depending on the Windows operating system preinstalled, the programs might vary. © Copyright Lenovo 2012, 2014...

  • Page 34: Accessing Lenovo Programs On The Windows 7 Operating System

    Control Panel. The icon name displayed in the search result or Control Panel might be different from the program name. You can find the program by its program name or icon name as shown in the Lenovo programs available on the Windows 7 operating system table.

  • Page 35: Lenovo Support Web Site

    • Lenovo Support • Lenovo Tools Lenovo Support Web site Technical support information is available on the Lenovo Support Web site at: http://www.lenovo.com/support This Web site is updated with the latest support information such as the following: • Drivers and software •...
  • Page 36 ThinkStation S30 Hardware Maintenance Manual...

  • Page 37: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes” on page 68. • If the computer hangs and no error is displayed, continue at step 7 on page 33. 7. Run the Diagnostic program. See “Lenovo Solution Center” on page 52. Problem determination tips Due to the variety of hardware and software combinations that can be encountered, use the following information to assist you in problem determination.
  • Page 38 7. Have the same configuration options set in the system 8. Have the same setup for operating-system-controlled files Comparing the configuration and software set-up between “working and non-working” systems will often lead to problem resolution. ThinkStation S30 Hardware Maintenance Manual...

  • Page 39: Chapter 5. Troubleshooting And Diagnostics

    Chapter 5. Troubleshooting and diagnostics This chapter describes some basic troubleshooting and diagnostic programs. If your computer problem is not described here, see “Lenovo Support Web site” on page 31 for additional troubleshooting resources. Basic troubleshooting The following table provides information to help you troubleshoot your computer problems.

  • Page 40: Accessing Control Panel On The Windows 8 Or Windows 8.1 Operating System

    To restore a captured configuration, do the following: • For Windows 7: Click Start ➙ Control Panel ➙ System and Security ➙ System ➙ System Protection ➙ System Restore. ThinkStation S30 Hardware Maintenance Manual...

  • Page 41: Troubleshooting

    • If the diagnostic programs detect a hardware failure, contact the Lenovo Customer Support Center. See “Lenovo Support Web site” on page 31 for more information. • If you are unable to run the diagnostic programs, contact the Lenovo Customer Support Center. See “Lenovo Support Web site” on page 31 for more information.
  • Page 42 • Verify that the audio device drivers are correctly installed. See Microsoft Windows help system for more information. If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 43: Cd Problems

    Refer to the documentation that comes with the application or game for instructions on setting sound-card settings. • If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 44: Dvd Problems

    If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31. DVD problems Select your symptom from the following list: •...

  • Page 45: Intermittent Problems

    • Ensure that video resolution is set to less than 1152 x 864. If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 46: Keyboard, Mouse, Or Pointing Device Problems

    If these actions do not correct the problem, run the diagnostic program Lenovo Solution Center. See “Lenovo Solution Center” on page 52. If you need technical assistance, see “Lenovo Support Web site” on page 31. "No Operating System Found" message or the system not starting from the correct hard disk drive Symptom: "No Operating System Found"...
  • Page 47 See “Enabling or disabling a device” on page 57. If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 48: Monitor Problems

    If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 49: Ethernet Problems

    • See your operating system documentation or help for further information on monitor settings. If these actions do not correct the problem, your monitor might need service. See “Lenovo Support Web site” on page 31 for details.
  • Page 50 Action: The network driver files may be corrupt or missing. Update the driver by referring to the “Solution” description for the procedure to make sure that the correct device driver is installed. The Wake on LAN feature is not working Symptom: The Wake on LAN (WOL) feature is not working. ThinkStation S30 Hardware Maintenance Manual...

  • Page 51: Option Problems

    If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 52: Performance And Lockup Problems

    • Verify that the option and any required device drivers are installed correctly. If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.
  • Page 53 3. Click Disk Cleanup. 4. A list of unnecessary file categories is displayed. Select each file category you want to delete, and then click OK. • Method 2 1. Open Control Panel. 2. Click Programs. 3. Click Turn Windows features on or off. 4.

  • Page 54: Printer Problems

    31. For step-by-step instructions on installing memory, see “Installing or replacing a memory module” on page 86. If these actions do not correct the problem, run the diagnostic programs (see “Lenovo Solution Center” on page 52 for instructions). If you need technical assistance, see “Lenovo Support Web site” on page 31.

  • Page 55: Software Problems

    • If you are unable to resolve the problem through other methods, uninstall the software program and reinstall it. If these actions do not correct the problem, you might need technical assistance. Contact your software manufacturer or see “Lenovo Support Web site” on page 31 for details. Chapter 5 Troubleshooting and diagnostics...

  • Page 56: Usb Problems

    Note: If you are unable to isolate and repair the problem yourself after running the program, save and print the log files. You will need the log files when you speak to a Lenovo technical support representative. ThinkStation S30 Hardware Maintenance Manual...

  • Page 57: Uefi Diagnostic Program

    UEFI diagnostic program A UEFI diagnostic program is preinstalled on the computer. It enables you to test memory modules and internal storage devices, view system information, and check and recover bad sectors on internal storage devices. To run the UEFI diagnostic program, do the following: 1.
  • Page 58 ThinkStation S30 Hardware Maintenance Manual...

  • Page 59: Chapter 6. Using The Setup Utility Program

    • Administrator Password • Hard Disk Password You do not have to set any passwords to use your computer. However, using passwords improves computing security. If you decide to set any passwords, read the following sections. © Copyright Lenovo 2012, 2014...

  • Page 60: Password Considerations

    3. Depending on the password type, select Set Power-On Password, Set Administrator Password, or Hard Disk Password. 4. Follow the instructions on the right side of the screen to set, change, or delete a password. ThinkStation S30 Hardware Maintenance Manual...

  • Page 61: Erasing Lost Or Forgotten Passwords (Clearing Cmos)

    Note: A password can be any combination of up to 64 alphabetic and numeric characters. For more information, see “Password considerations” on page 56. Erasing lost or forgotten passwords (clearing CMOS) This section provides instructions on how to erase lost or forgotten passwords, such as a user password. To erase a lost or forgotten password, do the following: 1.

  • Page 62: Selecting A Temporary Startup Device

    59. Enabling ErP LPS compliance mode and Deep Sx Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. For more information, go http://www.lenovo.com/ecodeclaration You can enable the ErP lowest power state (LPS) compliance mode and Deep Sx in the Setup Utility program to reduce the consumption of electricity when your computer is in sleep or off mode.

  • Page 63: Changing The Bios Settings Before Installing A New Operating System

    4. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm the exit. • Enabling the after power loss feature The after power loss feature enables your computer to wake up when the power supply resumes after a sudden loss of electricity.
  • Page 64 ThinkStation S30 Hardware Maintenance Manual...

  • Page 65: Chapter 7. Configuring Raid

    • If zero to three SATA hard disk drives or solid state drives are installed, no hard disk drive enablement module is needed. • If there is any SAS hard disk drive installed, the SAS hard disk drive enablement module (one to three hard disk drives) is required. © Copyright Lenovo 2012, 2014...

  • Page 66: Configuring Sata Or Sas Raid Functionality With The Intel Rste Configuration Utility

    3. The following five options are displayed. Press the up and down arrow keys to select an option. After you configure an option, press Tab or Enter to go to the next option. a. Name: Volume name. You can use the default name or type a preferred name. ThinkStation S30 Hardware Maintenance Manual...

  • Page 67: Quick Raid Setup Using The Lsi Megaraid Bios Configuration Utility

    b. RAID Level: You can change the RAID Level to one of the following: • RAID Level 0 • RAID Level 1 • RAID Level 5 (not supported on SATA hard disk drives when the SAS hard disk drive enablement module is installed) c.

  • Page 68: Installing Sata Or Sas Hard Disk Drives

    1. During the computer startup, follow the instructions on the screen. 2. Press Ctrl+H to enter the CONTROLLER SELECTION window. 3. Select the controller you want to configure, and then click Start to enter the LSI MegaRAID BIOS configuration utility. ThinkStation S30 Hardware Maintenance Manual...

  • Page 69: Creating Raid Volumes Using The Lsi Megaraid Bios Configuration Utility

    Creating RAID volumes using the LSI MegaRAID BIOS configuration utility This section provides instructions on how to create RAID volumes using the LSI MegaRAID BIOS configuration utility. To create RAID volumes using the LSI MegaRAID BIOS configuration utility, do the following: 1.

  • Page 70: Setting The Hot Spare Hard Disk Drive

    3. Select Make Global HSP or Make Dedicated HSP, and then click Go. 4. The main screen of the LSI MegaRAID BIOS configuration utility is displayed, and the hard disk drive you selected is listed as a hot spare hard disk drive in the right pane. ThinkStation S30 Hardware Maintenance Manual...

  • Page 71: Chapter 8. Symptom-To-Fru Index

    Check the power cord for continuity. Check the turn on switch for continuity. Turn on switch Beep symptoms Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST. © Copyright Lenovo 2012, 2014...

  • Page 72: Post Error Codes

    If the POST detects a problem, an error message appears on the screen. A single problem can cause several error messages to appear. When you correct the cause of the first error message, the other error messages probably will not appear on the screen the next time you turn on the system. ThinkStation S30 Hardware Maintenance Manual...

  • Page 73: Miscellaneous Error Messages

    POST Error Message Description/Action CMOS battery failed The CMOS battery is no longer functional. Replace the battery. CMOS checksum error - defaults loaded Checksum of CMOS is incorrect. The computer loads the default configuration settings. This error might indicate that CMOS has become corrupt due to a weak CMOS battery.
  • Page 74 Other display symptoms not listed above (including blank 1. Display or illegible display) 2. System Board Turn on indicator or hard disk drive in-use light not on, but 1. Power switch/LED assembly computer works correctly 2. System Board ThinkStation S30 Hardware Maintenance Manual...

  • Page 75: Undetermined Problems

    Message/Symptom FRU/Action Printer problems 1. Printer 2. System Board Program loads from the hard disk with a known-good 1. Run the Setup Utility program and check Startup diagnostics diskette in the first 3.5-inch diskette drive sequence. 2. Diskette Drive 3. Diskette Drive Cable 4.
  • Page 76 If all devices and adapters have been removed, and the problem continues, replace the system board. ThinkStation S30 Hardware Maintenance Manual...

  • Page 77: Chapter 9. Locations

    The following figure shows the locations of the connectors, controls, and indicators on the front of your computer. Figure 1. Front connector, control, and indicator locations Optical drive eject/close button USB 3.0 connector Microphone connector Headphone connector USB 3.0 connector Hard disk drive activity indicator Power button Power indicator © Copyright Lenovo 2012, 2014...

  • Page 78: Locating Connectors On The Rear Of Your Computer

    Microphone connector USB 3.0 connectors (2) USB 2.0 connectors (8) Serial connector (Serial connector 1) Note: If your computer is installed with a graphics card, ensure that you use the monitor connectors on the graphics card. ThinkStation S30 Hardware Maintenance Manual...

  • Page 79: Locating Frus And Crus

    Connector Description Audio line-in connector Used to receive audio signals from an external audio device, such as a stereo system. When you attach an external audio device, a cable is connected between the audio line-out connector of the device and the audio line-in connector of the computer.
  • Page 80 ThinkStation S30 Hardware Maintenance Manual...

  • Page 81: Looking Up Fru Information

    Once the access panel is removed, the specific CRU is visible. • The list of FRUs below is a partial list. For a complete listing of FRU information, such as FRU part numbers and supported computer models, go to: http:/www.lenovo.com/serviceparts-lookup Number FRU description Self-service CRU...

  • Page 82: Locating Parts On The System Board

    Front USB 2.0 connector (for connecting the front USB 2.0 switch connector) ports if applicable) Clear CMOS /Recovery jumper Internal USB 2.0 connector (for connecting the media card reader) eSATA connector (for connecting eSATA Auxiliary LED connector adapter) ThinkStation S30 Hardware Maintenance Manual...
  • Page 83 Front panel connector (for connecting LED Thermal sensor connector indicators and power switch) Front USB 3.0 connector (for connecting the Front audio connector front USB 3.0 ports if applicable) Internal speaker connector PCI Express x4 card slot PCI card slot PCI Express x16 graphics card slot PCI Express x4 card slot (x16 mechanical) PCI Express x16 graphics card slot (also supporting 400 GB...

  • Page 84: Locating Internal Drives

    Optical drive bay (with an optical drive installed in some models) Optical drive bay Card reader bay Hard disk drive bay or solid-state drive bay 1 Hard disk drive bay or solid-state drive bay 2 Hard disk drive bay or solid-state drive bay 3 ThinkStation S30 Hardware Maintenance Manual...

  • Page 85: Chapter 10. Replacing Frus

    Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information” on page 1. Notes: 1. Use only computer parts provided by Lenovo. 2. When installing or replacing an option, use the appropriate instructions in this section along with the instructions that come with the option.

  • Page 86: Removing The Computer Cover

    4. Unlock any locking device that secures the computer cover, such as a keylock, a padlock or an integrated cable lock. 5. Disengage the cover latch and remove the cover. Figure 6. Removing the computer cover ThinkStation S30 Hardware Maintenance Manual...

  • Page 87: Removing And Reinstalling The Front Bezel

    Removing and reinstalling the front bezel Attention: Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information” on page 1. This section provides instructions on how to remove and reinstall the front bezel. To remove and reinstall the front bezel, do the following: 1.

  • Page 88: Installing Or Replacing A Pci Card

    • If you are installing a PCI card, remove the appropriate metal slot cover at the rear of the computer. • If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it out of the slot. ThinkStation S30 Hardware Maintenance Manual...
  • Page 89 Notes: a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small amount until it is removed from the card slot. b. If the card is held in place by a retaining latch, press the card retaining latch as shown to disengage the latch.

  • Page 90: Installing Or Replacing A Memory Module

    This section provides instructions on how to install or replace a memory module. CAUTION: Turn off the computer and wait three to five minutes to let the computer cool before installing or replacing a memory module. ThinkStation S30 Hardware Maintenance Manual...
  • Page 91 This section provides instructions on how to install or replace a memory module. Your computer has eight slots for installing or replacing DDR3 ECC UDIMMs or DDR3 ECC RDIMMs. When installing or replacing a memory module, use the following guidelines: •...
  • Page 92 Figure 12. Removing a memory module • If you are installing a memory module, open the retaining clips of the memory slot into which you want to install the memory module. Figure 13. Opening the retaining clips ThinkStation S30 Hardware Maintenance Manual...

  • Page 93: Installing Or Replacing The Optical Drive

    8. Position the new memory module over the memory slot. Make sure that the notch on the memory module aligns correctly with the slot key on the system board. Push the memory module straight down into the slot until the retaining clips close. Figure 14.
  • Page 94 Figure 16. Removing the optical drive 5. Install the optical drive retainer on the side of the new optical drive. Figure 17. Installing the optical drive retainer ThinkStation S30 Hardware Maintenance Manual...
  • Page 95 6. Slide the new optical drive into the drive bay from the front of the computer until the optical drive snaps into position. Figure 18. Installing the optical drive 7. Connect the signal cable and the power cable to the new optical drive. Figure 19.

  • Page 96: Replacing The Card Reader

    5. Disconnect the card reader cable from the front USB connector on the system board. See “Locating parts on the system board” on page 78. 6. Press the blue retaining clip to remove the card reader out of the chassis. Figure 20. Removing the card reader ThinkStation S30 Hardware Maintenance Manual...
  • Page 97 7. Install the card reader retainer on the side of the new card reader. Figure 21. Installing the card reader retainer 8. Slide the new card reader into the drive bay until it snaps into position. Figure 22. Installing the card reader 9.

  • Page 98: Replacing The Battery

    This is normal after replacing the battery. 7. Turn on the computer and all attached devices. 8. Use the Setup Utility program to set the date, time, and any passwords. See Chapter 6 “Using the Setup Utility program” on page 55. ThinkStation S30 Hardware Maintenance Manual...

  • Page 99: Replacing The Heat Sink And Fan Assembly

    What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 117. Replacing the heat sink and fan assembly Attention: Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information”...
  • Page 100 , then fully tighten screw , and then fully tighten screw 10. Connect the heat sink and fan assembly cable to the microprocessor fan connector on the system board. See “Locating parts on the system board” on page 78. ThinkStation S30 Hardware Maintenance Manual...

  • Page 101: Replacing The Rear Fan Assembly

    What to do next: • To work with another piece of hardware, go to the appropriate section. • To complete the installation or replacement, go to “Completing the parts replacement” on page 117. Replacing the rear fan assembly Attention: Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information”...

  • Page 102: Installing Or Replacing A Hard Disk Drive

    (one to three hard disk drives) or the LSI MegaRAID SAS adapter card is installed. To install or replace a hard disk drive, do the following: 1. Turn off the computer and disconnect all power cords from electrical outlets. ThinkStation S30 Hardware Maintenance Manual...
  • Page 103 2. Remove the computer cover. See “Removing the computer cover” on page 82. 3. Locate the hard disk drive. See “Locating internal drives” on page 80. 4. Disconnect the signal cable and the power cable from the hard disk drive. 5.
  • Page 104 Note: If you are installing a 2.5-inch hard disk drive, you need to install it into a 2.5 to 3.5-inch converter bracket first. Then install the 2.5-inch hard disk drive with the converter bracket into the 3.5-inch hard disk drive bracket. Figure 30. Installing a 2.5-inch hard disk drive into the bracket ThinkStation S30 Hardware Maintenance Manual...
  • Page 105 8. Slide the new hard disk drive and bracket into the hard disk drive bay until it snaps into position. Figure 31. Installing a hard disk drive 9. Connect the signal cable and the power cable to the new hard disk drive. Figure 32.

  • Page 106: Installing Or Replacing A Hard Disk Drive Enablement Module

    4. Locate the hard disk drive enablement module on the system board. See “Locating parts on the system board” on page 78. 5. Remove the heat sink and fan assembly for easier access to the hard disk drive enablement module. See “Replacing the heat sink and fan assembly” on page 95. ThinkStation S30 Hardware Maintenance Manual...
  • Page 107 6. If you are replacing the hard disk drive enablement module, press the two tabs of the plastic standoff toward each other and then lift the hard disk drive enablement module upward to remove it from the system board. Figure 34. Removing the hard disk drive enablement module 7.

  • Page 108: Replacing The Front Audio And Usb Assembly

    4. Disconnect the front audio and USB assembly cables from the system board. See “Locating parts on the system board” on page 78. Note: Make sure you note the locations of the cables when you disconnect the cables from the system board. ThinkStation S30 Hardware Maintenance Manual...

  • Page 109: Replacing The Internal Speaker

    5. Remove the screw that secures the front audio and USB assembly bracket, and then remove the bracket from the chassis. Figure 36. Removing the front audio and USB assembly 6. Position the front audio and USB assembly bracket into the chassis, and then align the screw hole in the bracket with the corresponding hole in the chassis.

  • Page 110: Replacing The Microprocessor

    • To complete the installation or replacement, go to “Completing the parts replacement” on page 117. Replacing the microprocessor Attention: Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information” on page 1. ThinkStation S30 Hardware Maintenance Manual...
  • Page 111 This section provides instructions on how to replace the microprocessor. CAUTION: The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool. Notes: •...
  • Page 112 Figure 40. Removing the microprocessor 9. Touch the static-protective package that contains the new microprocessor to any unpainted surface on the outside of the computer. Then, remove the new microprocessor from the package. ThinkStation S30 Hardware Maintenance Manual...
  • Page 113 10. Remove the new microprocessor from the protective cover that protects the gold contacts on the bottom of the new microprocessor. Do not touch the pins on the microprocessor socket or the gold contacts on the bottom of the new microprocessor. Figure 41.

  • Page 114: Replacing The System Board

    Replacing the system board Attention: Do not open your computer or attempt any repair before reading and understanding the “Important Safety Information” on page 1. This section provides instructions on how to replace the system board. ThinkStation S30 Hardware Maintenance Manual...
  • Page 115 CAUTION: The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool. Note: Before replacing the system board, make sure you have a retention module for the new system board. To replace the system board, do the following: 1.
  • Page 116 Figure 45. Removing the nine screws that secure the system board to the chassis 10. Slide the system board to the front of the computer and then carefully pivot the failing system board upward to remove it out of the chassis. ThinkStation S30 Hardware Maintenance Manual...
  • Page 117 Figure 46. Removing the system board 11. Position the new system board into the chassis so that the screw holes in the new system board are aligned with those in the chassis. Install the nine screws that secure the system board to the chassis by installing screw to screw 12.

  • Page 118: Replacing The Power Supply Assembly

    This section provides instructions on how to replace the power supply assembly. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety and proper Underwriters Laboratories (UL) certification. CAUTION: ThinkStation S30 Hardware Maintenance Manual...
  • Page 119 Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Never remove the cover on a power supply or any part that has the following label attached. Hazardous voltage, current, and energy levels are present inside any component that has this label attached.
  • Page 120 8. Ensure that the new power supply assembly is the correct replacement. 9. Install the new power supply assembly into the chassis so that the screw holes in the power supply assembly align with those in the chassis. ThinkStation S30 Hardware Maintenance Manual...

  • Page 121: Completing The Parts Replacement

    7. To update your configuration, refer to Chapter 6 “Using the Setup Utility program” on page 55. Note: In most areas of the world, Lenovo requires the return of the defective Customer Replaceable Unit (CRU). Information about this will come with the CRU or will come a few days after the CRU arrives.
  • Page 122 ThinkStation S30 Hardware Maintenance Manual...

  • Page 123: Chapter 11. Additional Service Information

    • To determine the current Level of BIOS: – Start the Setup Utility program. • Sources for obtaining the latest level BIOS available 1. Lenovo support web site: http://www.lenovo.com/support 2. Lenovo Customer Support Center 3. Levels 1 and 2 Support To update (flash) the BIOS, see “Updating (flashing) the BIOS”...

  • Page 124: Updating (Flashing) The Bios From A Disc

    Note: You can download a self-starting bootable disc image (known as an ISO image) with the system program updates to create a system-program-update disc. Go to http://www.lenovo.com/support. To update (flash) the BIOS from a disc on the Windows 8 (64-bit) or Windows 8.1 (64-bit) operating system, do the following: 1.

  • Page 125: Updating (Flashing) The Bios From Your Operating System

    Updating (flashing) the BIOS from your operating system Note: Because Lenovo makes constant improvements to its Web sites, the Web page contents are subject to change without notice, including the contents referenced in the following procedure. To update (flash) the BIOS from your operating system, do the following: 1.

  • Page 126: Power Management

    • For Windows 8.1: Click Choose what the power button does. 4. In the Shutdown setting section, clear Turn on fast startup. Note: If the settings are unavailable, click Change settings that are currently unavailable. 5. Click Save changes. ThinkStation S30 Hardware Maintenance Manual...

  • Page 127: Appendix A. System Memory Speed

    Microprocessor model Memory frequency Intel Xeon E5-1603, E5-1607, E5-2603, E5-2609 1066 MHz Intel Xeon E5-2620, E5-2630/2630L, E5-2640, E5-2667 1333 MHz Intel Xeon E5-1620, E5-1650, E5-1660, E5-2637, E5-2643, E5-2650/2650L, E5-2660, E5-2665, E5-2670, 1600 MHz E5-2680, E5-2690 © Copyright Lenovo 2012, 2014...
  • Page 128 E5-2637V2, E5-2643V2, E5-2650V2, E5-2660, 1866 MHz E5-2660V2, E5-2667V2, E5-2670V2, E5-2680V2, E5-2687V2, E5-2690V2, E5-2695V2, E5-2697V2 Intel Xeon E5-2603V2, E5-2609V2 1333 MHz Table 10. DIMM type and speed: PC3-15000 (1.5 V) Microprocessor model Memory frequency Intel Xeon E5-1680V2 1866 MHz ThinkStation S30 Hardware Maintenance Manual...

  • Page 129: Appendix B. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 130: Television Output Notice

    The emission notices information is available in the ThinkStation Safety and Warranty Guide that came with your computer. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Rescue and Recovery The Lenovo logo...

  • Page 131: Index

    Microphone connector drives Mini DisplayPort connector bays specifications DVI monitor connector optical drive, replacing Optional-service CRUs environment, operating Ethernet connector exiting, Setup Utility external options, installing part numbers 1, 77, 81 © Copyright Lenovo 2012, 2014...
  • Page 132 Setup Utility Setup Utility program, starting Setup Utility, exiting speed, memory starting the Setup Utility program startup device sequence, changing temporary, selecting static-sensitive devices, handling support web site support ThinkStation S30 Hardware Maintenance Manual...

This manual is also suitable for:

Thinkstation 4351Thinkstation 4352

Table of Contents

Save PDF