It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page 3. This manual includes a complete Field Replaceable Unit (FRU) part number listing for each machine type listed on the cover.
FRU part numbers. Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005, will contain some RoHS compliant FRUs.
Page 10
CAUTION: Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the server/workstation covers, unless instructed otherwise in the installation and configuration procedures.
v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.
5. Check for any obvious alterations. Use good judgment as to the safety of any alterations. 6. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7.
Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplified) v Chinese (traditional) v French v German v Hebrew v Italian v Korean v Spanish DANGER Electrical current from power, telephone and communication cables is hazardous.
Page 14
CAUTION: When replacing the lithium battery, use only Part Number 33F8354 or an equivalent type battery recommended by the manufacturer. If your system has a module containing a lithium battery, replace it only with the same module type made by the same manufacturer. The battery contains lithium and can explode if not properly used, handled, or disposed of.
Page 15
CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Page 18
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) Hardware Maintenance Manual...
Page 19
PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomadas elétricas corretamente instaladas e aterradas.
Page 20
CUIDADO: Ao substituir a bateria de lítio, utilize apenas uma bateria com Número de Peça 33F8354 ou um tipo de bateria equivalente recomendado pelo Se o seu sistema possui um módulo com uma bateria de lítio, substitua-o apenas por um módulo do mesmo tipo e do mesmo fabricante.
Page 21
CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação.
Page 26
DANGER Le courant électrique provenant de l’alimentation, du téléphone et des câbles de transmission peut présenter un danger. Pour éviter tout risque de choc électrique : v Ne manipulez aucun câble et n’effectuez aucune opération d’installation, d’entretien ou de reconfiguration de ce produit au cours d’un orage. v Branchez tous les cordons d’alimentation sur un socle de prise de courant correctement câblé...
Page 27
ATTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
Page 28
≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ATTENTION: Soulevez la machine avec précaution. ATTENTION: L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordonsd’alimentation. Pour mettre l’unité...
Page 29
VORSICHT An Netz-, Telefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. v Alle angeschlossenen Geräte ebenfalls an Schutzkontaktsteckdosen mit ordnungsgemäß...
Page 30
CAUTION: Eine verbrauchte Lithiumbatterie nur durch eine Batterie mit der Teilenummer 33F8354 oder eine gleichwertige, vom Hersteller empfohlene Batterie ersetzen. Enthält das System ein Modul mit einer Lithiumbatterie, dieses nur durch ein Modul desselben Typs und von demselben Hersteller ersetzen. Die Batterie enthält Lithium und kann bei unsachgemäßer Verwendung, Handhabung oder Entsorgung explodieren.
Page 31
≥18 kg ≥32 kg ≥55 kg ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein. Um die Stromversorgung für die Einheit vollständig zu unterbrechen, müssen alle zum Gerät führenden Netzkabel vom Netz getrennt werden.
Page 35
PERICOLO La corrente elettrica proveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra.
Page 36
ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo il Numero parte 33F8354 o un tipo di batteria equivalente consigliato dal produttore. Se sul sistema è presente un modulo che contiene una batteria al litio, sostituirlo solo con un tipo di modulo dello stesso tipo della stessa casa di produzione.
Page 37
≥18 kg ≥32 kg ≥55 kg ATTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. ATTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazione. Per disattivare l’alimentazione dall’unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione.
Page 40
PELIGRO La corriente eléctrica procedente de cables de alimentación, teléfonos y cables de comunicación puede ser peligrosa. Para evitar el riesgo de descarga eléctrica: v No conecte ni desconecte los cables ni realice ninguna tarea de instalación, mantenimiento o reconfiguración de este producto durante una tormenta eléctrica.
Page 41
PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explotar si no se utiliza, manipula o desecha correctamente.
Page 42
≥18 kg ≥32 kg ≥55 kg PRECAUCIÓN: Adopte procedimientos seguros al levantar el equipo. PRECAUCIÓN: El botón de control de alimentación del dispositivo y el interruptor de alimentación de la fuente de alimentación no desconectan la corriente eléctrica suministrada al dispositivo. Además, el dispositivo podría tener más de un cable de alimentación.
Minimum configuration as shipped: 0.05 kVA (all machine types) Maximum configuration: 0.12 kVA (Machine Types 6416, 6417, 6418, 6449, 6453 and 6495) Note: Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.
3. Verify that the power cord is properly connected to an AC power outlet. 4. Verify that you are using a good AC power outlet. Plug another device into the outlet or contact the power company or supplier to verify that the outlet is working correctly .
Page 47
Comparing the configuration and software set-up between “working and non-working” systems will often lead to problem resolution. Chapter 4. General Checkout...
PC-Doctor for Windows PE The PC-Doctor for Windows PE diagnostic program is part of the Rescue and Recovery workspace on each Lenovo computer. Use PC-Doctor for Windows PE, if you are unable to start the Windows operating system or if PC-Doctor for Windows has not been successful in isolating a possible problem.
To create a diagnostic CD image, download a self-starting bootable CD image (known as an .iso image) of the diagnostic program from http:// www.lenovo.com/support/. After you download the image, you can create the CD using any CD burning software. If the computer does not have a CD burner or you do not have Internet access, see “Creating diagnostic diskettes.”...
7. When prompted, insert a blank, formatted diskette into the diskette drive and continue to follow the instructions on the screen. 8. When the operation is complete, remove the diskette and click Quit. 9. Insert another blank, formatted diskette into the diskette drive and continue to follow the instructions on the screen.
Page 52
Test results (N/A, PASSED, FAILED, ABORTED) are displayed in the field beside the test description and in the test log. See “Viewing the test log” on page 47. To select one or more tests, use the following procedure. 1. Open the corresponding test category. 2.
The Full Erase Hard Drive provides a DOS utility that performs the following: v Performs all the steps in Quick Erase. v Provides a DOS utility that writes random data to all sectors of the hard drive. v Provides an estimate of time to completion along with a visual representation of completion status.
v Setup Utility program and hard disk drive passwords are not case sensitive v Not be your name or your user name v Not be a common word or a common name v Be significantly different from your previous password User Password When a User Password is set, the computer cannot be used until a valid password is typed from the keyboard.
Note: Selecting a startup device from the Startup Device menu does not permanently change the startup sequence. Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program (see “Starting the Setup Utility program” on page 49).
Diagnostic error codes Refer to the following diagnostic error codes when using the diagnostic tests. See “Running tests” on page 45 for the specific type for information about the Diagnostic programs. In the following index, X can represent any number. Diagnostic Error Code FRU/Action 000-000-XXX...
Diagnostic Error Code FRU/Action 000-038-XXX 1. Flash the system. See “Updating BIOS Extension failure (flashing) BIOS from a CD-ROM or diskette” on page 152 2. Adapter card 3. System board 000-039-XXX 1. Flash the system. See “Updating BIOS DMI data error (flashing) BIOS from a CD-ROM or diskette”...
Page 62
Diagnostic Error Code FRU/Action 001-024-XXX System board System Addressing test failure 001-025-XXX 1. Flash the system. See “Updating System Checksum Value error (flashing) BIOS from a CD-ROM or diskette” on page 152 2. System board 001-026-XXX 1. Flash the system. See “Updating System FLASH data error (flashing) BIOS from a CD-ROM or diskette”...
Diagnostic Error Code FRU/Action 001-197-XXX 1. Make sure the component that is called System test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Re-run test 3. Replace the component that is called out in warning statement 4.
Diagnostic Error Code FRU/Action 001-275-XXX 1. Device on IRQ8 System IRQ8 failure 2. System board 001-276-XXX 1. Device on IRQ9 System IRQ9 failure 2. System board 001-277-XXX 1. Device on IRQ10 System IRQ10 failure 2. System board 001-278-XXX 1. Device on IRQ11 System IRQ11 failure 2.
Diagnostic Error Code FRU/Action 005-010-XXX 1. Video card, if installed 005-011-XXX 2. System board 005-012-XXX 005-013-XXX Video Signal failure 005-016-XXX 1. Video Ram Video Simple Pattern 2. Video card, if installed test failure 3. System board 005-024-XXX 1. Video card, if installed Video Addressing test failure 2.
Page 66
Diagnostic Error Code FRU/Action 005-198-XXX 1. If a component is called out, make sure Video test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Flash the system and re-test. See “Updating (flashing) BIOS from a CD-ROM or diskette”...
Page 67
Diagnostic Error Code FRU/Action 015-000-XXX No action USB port Interface Test Passed 015-001-XXX 1. Remove USB device(s) and re-test USB port Presence 2. System board 015-002-XXX 1. Remove USB device(s) and re-test USB port Timeout 2. System board 015-015-XXX 1. Remove USB device(s) and re-test USB port External Loopback failure 2.
Page 68
Diagnostic Error Code FRU/Action 015-198-XXX 1. If a component is called out, make sure USB port test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Flash the system and re-test. See “Updating (flashing) BIOS from a CD-ROM or diskette”...
Page 69
Diagnostic Error Code FRU/Action 018-250-XXX 1. PCI card PCI Card Services error 2. Riser card, if installed 3. System board 020-000-XXX No action PCI Interface Test Passed 020-0XX-XXX 1. PCI card PCI Interface error 2. Riser card, if installed 3. System board 020-195-XXX Information only PCI Test aborted by user...
Page 70
Diagnostic Error Code FRU/Action 025-027-XXX 1. IDE signal cable IDE interface Configuration/Setup error 2. Flash the system. See “Updating (flashing) BIOS from a CD-ROM or diskette” on page 152 3. Reseat IDE signal cable 4. IDE device 5. System board 025-02X-XXX 1.
Page 71
Diagnostic Error Code FRU/Action 030-027-XXX 1. SCSI signal cable SCSI interface Configuration/Setup error 2. Flash the system. See “Updating (flashing) BIOS from a CD-ROM or diskette” on page 152 3. SCSI device 4. SCSI adapter card, if installed 5. System board 030-03X-XXX 1.
Page 72
Diagnostic Error Code FRU/Action 035-196-XXX 1. Press F3 to review the log file RAID interface test halt, error threshold 2. Re-start the test to reset the log file exceeded 035-197-XXX 1. Make sure the component that is called RAID interface test warning out is connected and/or enabled.
Page 73
Diagnostic Error Code FRU/Action 071-197-XXX 1. Make sure the component that is called Audio port test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Re-run test 3. Replace the component that is called out in warning statement 4.
Page 74
Diagnostic Error Code FRU/Action 080-198-XXX 1. If a component is called out, make sure Game Port interface test aborted it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Flash the system and re-test. See “Updating (flashing) BIOS from a CD-ROM or diskette”...
Page 75
Diagnostic Error Code FRU/Action 086-199-XXX 1. See “Undetermined problems” on page Mouse Port interface test failed, cause unknown 2. Flash the system and re-test. See “Updating (flashing) BIOS from a CD-ROM or diskette” on page 152 3. Replace component under function test 089-000-XXX No action Microprocessor Test Passed...
Page 76
Diagnostic Error Code FRU/Action 170-197-XXX 1. Make sure the component that is called Voltage Sensor(s) test warning out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2. Re-run test 3. Replace the component that is called out in warning statement 4.
Page 77
Diagnostic Error Code FRU/Action 175-198-XXX 1. If a component is called out, make sure Thermal Sensor(s) test aborted it is connected and/or enabled 2. Flash the system and re-test. See “Updating (flashing) BIOS from a CD-ROM or diskette” on page 152 3.
Page 78
Diagnostic Error Code FRU/Action 215-XXX-XXX 1. CD-ROM Drive Cable CD-ROM Drive error 2. Check AC/DC power adapter voltages 3. CD-ROM drive 4. System board 217-000-XXX No action Hard Disk Drive Test Passed 217-25X-XXX 1. Hard Disk Drive Cable 217-26X-XXX 2. Check AC/DC power adapter voltages Hard Disk Drive (IDE) error 3.
Page 79
Diagnostic Error Code FRU/Action 415-XXX-XXX Remove the Modem and re-test the system Modem error Chapter 7. Symptom-to-FRU Index...
Beep symptoms Beep symptoms are tones or a series of tones separated by pauses (intervals without sound) during POST. The following tables describes beep symptoms. Beep Symptom FRU/Action 1, 2, or 3 beeps Reseat the memory modules. If the error persists, replace the memory modules one at a time until the failing module is determined.
POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation...
Page 82
POST Error Message Description/Action Press TAB to show POST screen Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen. Error: Non-System disk or disk error The BIOS was unable to find a suitable boot Replace and press any key when ready device.
Miscellaneous error messages Message/Symptom FRU/Action Changing display colors Display/Monitor Computer will not power-off. See “Checking 1. Power Switch for power problems” on page 39. 2. System Board 3. Riser card, if installed Computer will not PXE from server 1. Ensure that network is in startup sequence as first device or first device after diskette 2.
Message/Symptom FRU/Action Non-system disk or disk error-type message 1. Diskette Drive with a known-good diagnostic diskette. 2. System Board 3. Diskette Drive Cable Other display symptoms not listed above 1. Display (including blank or illegible display) 2. System Board Power-on indicator or hard disk drive in-use 1.
Locations This section provides illustrations to help locate the various connectors, controls, and components of the computer. Connectors on the front of the computer Note: Not all computer models will have the following controls and connections. USB connector USB connector Microphone connector Media card reader Headphone connector...
Connectors on the rear of the computer Cable lock latch Microphone connector AC/DC Power Adapter Audio line out connector connector Monitor connector Audio line in connector USB connectors (4) Express card assembly Ethernet connector RJ11 modem connector Chapter 8. Replacing FRUs...
Locating components This section shows the location of the various components in the computer. 1 Front Audio/USB assembly 8 Microprocessor 2 Hard disk drive 9 Heat sink 3 System fan assembly 10 Side cover 4 Optical drive 11 Memory modules 5 AC/DC Power Adapter 12 Internal speaker 6 Express Card assembly...
System board locations Microprocessor and heat sink Modem daughter card (MDC) connector Memory connectors (2) Express card USB connector Thermal sense cable connector Express card PCIe connector Front USB connector Media card reader connector Power switch/LED connector Internal speaker connector Battery Front audio connector SATA IDE connectors (2)
Opening the cover Important Turn off the computer and wait 3 to 5 minutes to let the computer cool before opening the computer cover. This section provides instructions on how to open the computer cover. 1. Remove any media (diskettes, CDs, or tapes) from the drives, shut down your operating system, and turn off all attached devices and the computer.
Replacing the CMOS battery This procedure describes how to remove and replace the CMOS battery. If the CMOS battery fails, the date, time, and configuration information (including passwords) are lost. An error message is displayed when you turn on the computer.
Replacing the microprocessor This section provides instructions on how to replace the microprocessor. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Locate the microprocessor. See “System board locations” on page 83. 3. Remove the four screws securing the heat sink to the retention module on the system board and lift the heat sink off the system board.
Page 93
6. When installing the microprocessor make sure that the small handle is in the vertical position. 7. Holding the new microprocessor 1 with your fingers, remove the protective cover 2 that protects the microprocessor contacts. 8. Holding the microprocessor with your fingers, position the microprocessor so that the triangle 1 is properly aligned with the socket.
Page 94
11. Position the heat sink on the retention module so that the four screws are aligned with the posts on the system board. Tighten the four screws to secure the heat sink to the system board. 12. Go to “Completing the FRU replacement” on page 103. Hardware Maintenance Manual...
Replacing the system board This section provides instructions on how to replace the system board. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Take note of the location of all cable connections on the system board and disconnect all cables.
Replacing a hard disk drive This section provides instructions on how to replace the hard disk drive. Important When a new hard disk drive is installed, a set of Product Recovery discs might be required. The set of Product Recovery discs enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory.
Page 97
7. To install the new hard disk drive into the plastic bracket 1 , flex the bracket and align the pins on the bracket with the holes in the hard disk drive. Do not touch the circuit board 2 on the bottom of the hard disk drive. 8.
Replacing an optical drive This section provides instructions on how to replace an optical drive. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Remove the front bezel by releasing the two tabs and pivoting the bezel forward to remove completely.
Page 99
6. Slide the new optical drive into the drive bay until it snaps into position. 7. Connect the signal and power cables to the drive. 8. Replace the front bezel. 9. Go to “Completing the FRU replacement” on page 103. Chapter 8.
Replacing a memory module This section provides instructions on how to replace a memory module. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Locate the memory connector. See “System board locations” on page 83. 3. Remove the memory module being replaced by opening the retaining clips as shown.
Replacing the modem This section provides instructions on how to replace the modem. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Locate the MDC connector. See “System board locations” on page 83. The modem card 1 will be connected to the MDC connector. 3.
Page 102
6. Connect the RJ11 modem cable to the new modem card. 7. Install the new modem card to the MDC connector on the system board by aligning the holes in the modem card with the pins in the system board. 8.
Replacing the Express card assembly This section provides instructions on how to replace the Express card assembly. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Locate the Express card assembly. See “Locating components” on page 82 3.
Page 104
6. Install the new Express card assembly into the chassis by aligning the holes in the Express card assembly with the pins in the chassis. 7. Install the four screws to secure the Express card assembly to the chassis. 8. Reconnect the cable to the Express card assembly. 9.
Replacing the Media Card Reader This section provides instructions on how to replace the Media Card Reader. 1. Open the computer cover. See “Opening the cover” on page 84. 2. Locate the Media Card Reader. See “Locating components” on page 82 3.
Page 106
6. Install the new Media Card Reader into the chassis and align the screw-hole in the Media Card Reader with the hole in the chassis. 7. Install the screw to secure the Media Card Reader to the chassis. 8. Connect the Media Card Reader cable to the system board. 9.
Replacing the system fan assembly This section provides instructions on how to replace the system fan assembly. Note: When you receive your new system fan assembly, you will receive new rubber mounts. 1. Open the computer cover. See “Opening the cover” on page 84. 2.
Page 108
10. To install the new system fan assembly into the chassis, align the open holes in the system fan assembly with the long rubber mounts in the chassis. Pull the rubber mounts through the holes in the system fan assembly until the system fan is in place.
Completing the FRU replacement After replacing the parts, you need to close the cover and reconnect cables, including telephone lines and power cords. Also, depending on the part that was replaced, you might need to confirm the updated information in the Setup Utility program.
Page 110
4. If a cover lock is installed, lock the cover. 5. Reconnect the external cables and power cords to the computer. See “Connectors on the rear of the computer” on page 81. 6. To update your configuration, see Chapter 6, “Using the Setup Utility,” on page Hardware Maintenance Manual...
Page 116
42T5156 Power cord (optional) - Korea (models) 42T5162 Power cord (optional) - India (models) 42T5168 Power cord (optional) - Thailand (models) 42T4400 6416 Windows XP Home Recovery CDs FRU# US/UK/AP/TH (models) FR/CF (models) 45C5589 GR (models) IT (models) BR (models)
Page 117
6416 Windows XP Home Recovery CDs FRU# Simplified Chinese (models) Taiwan-TC (models) Hong Kong-TC (models) Korea (models) 6416 Windows XP Pro Recovery CDs FRU# US/UK/AP/TH (models) 45C4863 FR/CF (models) 45C4864 GR (models) 45C4865 IT (models) 45C4867 SP/LA (models) 45C4866 DK (models)
Page 118
6416 Vista Business 32 Recovery DVDs FRU# Finnish (models) 46R1332 Polish (models) 46R1333 Russian (models) 46R7471 Turkish (models) 46R1335 Hungarian (models) 46R1336 Greek (models) 46R1337 Simplified Chinese (models) 46R7472 Taiwan (models) 46R7473 HongKong (models) 46R7474 Korea (models) 46R1341 Slovenian (models)
Page 119
6416 Windows XP Pro Recovery DVDs FRU# Arabic (models) 45R6921 Hungarian (models) 45R6922 Russian English (models) 45R6923 6416 Vista Home Basic 32 Recovery DVDs FRU# English (models CTO) 53Y4657 Spanish (models CTO) 53Y4658 Chapter 9. FRU lists...
Machine Type 6417 Item # 6417 FRUs FRU# Front audio/USB card and cable (included in Cables kit 41R8510) (all models) 41R8510 Hard disk drive, 80 GB 7200rpm SATA (models 11S 11L 11D 11Y 11A 11Q 11T 11E 40Y9034 11J 12U 12F 12S 12L 12D 12Y 12G 13G 15U 15F 16U 16F) Hard disk drive, 160 GB 7200rpm SATA (models 14G) 40Y9035 System fan (all models)
Page 122
6417 Keyboards (USB Preferred Pro) FRU# Danish (models 12G 13G 14G) 41A5298 Dutch (models 12G 13G 14G) 41A5299 French (models 12G 13G 14G) 41A5300 French Canadian 445 (models 12F 15F 16F) 41A5301 French Canadian 58 (models 12F 15F 16F) 41A5302 German (models 12G 13G 14G) 41A5303 Greek (models)
Page 123
6417 Adapters and miscellaneous FRUs FRU# Speakers (2-piece) Lenovo Logo (models) 41A5331 BTL external speaker (models) 41A5334 Speaker Power brick - US, Canada, LA low voltage, ASEAN (models 12U 12S 15U 16U) 89P8571 Speaker Power brick - LA high voltage (non-APU) (models 12Y)
Page 124
6417 Power Cords FRU# Power cord (optional) - South Africa (models 11A 12G 13G 14G) 42T5141 Power cord - Israel (models 12G 13G 14G) 42T5062 Power cord (optional) - Israel (models 12G 13G 14G) 42T5147 Power cord - China (PRC) (models) 42T5065 Power cord (optional) - China (PRC) (models) 42T5150...
Page 125
6417 Windows XP Pro Recovery CDs FRU# US/UK/AP/TH (models 12U 12G 12L ) 45C4863 FR/CF (models 12F) 45C4864 GR (models 12G) 45C4865 IT (models 12G) 45C4867 BR (models 12G) SP/LA (models 12S 12P 12Y 12G ) 45C4866 DK (models 12G) 45C4871 NL (models 12G) 45C4872...
Page 126
6417 Vista Home Basic 32 Recovery DVDs FRU# DK (models) NL (models) CZ (models) FI (models) PL (models) RU (models) TR (models) HU (models) GK (models) PO (models) CS (models) TW (models) HK (models) KR (models) SL (models) RE (models) 6417 Vista Business 32 Recovery DVDs FRU# English (models 13G 14G 15U 16U)
Page 127
6417 Vista Business 32 Recovery DVDs FRU# Romanian (models 13G 14G) 46R1343 Portuguese (models 13G 14G) 46R1344 Serbian (models 13G 14G) 46R1345 Slovakian (models 13G 14G) 46R1346 Arbric (models 13G 14G) 46R1347 Hebrew (models 13G 14G) 46R1348 Brazilian Portuguese (models) 46R7475 6417 XP Pro Recovery DVDs FRU#...
Page 131
6418 Adapters and miscellaneous FRUs FRU# Speaker Power brick - US, Canada, LA low voltage, ASEAN (models 13U 11U 12U 11S 12S 89P8571 11A 12A 16U) Speaker Power brick - LA high voltage (non-APU) (models) 89P8575 Speaker Power brick - China, Thailand (models) 89P8581 Speaker Power brick - Japan (models) 89P8577...
Page 132
6418 Power Cords FRU# Power cord (optional) - Israel (models 11G 12G) 42T5147 Power cord - China (PRC) (models) 42T5065 Power cord (optional) - China (PRC) (models) 42T5150 Power cord - Taiwan (models) 42T5071 Power cord (optional) - Taiwan (models) 42T5156 Power cord - Korea (models 11K 12K 11R 12R) 42T5077...
Page 144
Optical Wheel Mouse (400DPI, USB) models 11S 11L 11D 11Y 11G 11A 11Q 11T 11E 11J) 41U3030 6453 Adapters and miscellaneous FRUs FRU# Speakers (2-piece) Lenovo Logo (models) 41A5331 BTL external speaker (models) 41A5334 Speaker Power brick - US, Canada, LA low voltage, ASEAN (models 12S)
Page 145
6453 Power Cords FRU# Power cord - Japan (models 11E 11J) 42T5011 Power cord (optional) - Japan (models 11E 11J) 42T5096 Power cord - Argentina (models) 42T5017 Power cord (optional) - Argentina (models) 42T5102 Power cord - Brazil (models 11P) 42T5174 Power cord (optional) - Brazil (models 11P) 42T5177...
Page 146
6453 Windows XP Home Recovery CDs FRU# NL (models ) AE (models ) SV (models ) HE (models ) FI (models ) NO (models ) PL (models ) PO (models ) RU (models ) RE (models ) HU (models ) CZ (models ) TR (models ) GK (models )
Page 147
6453 Windows XP Pro Recovery CDs FRU# GK (models ) 45C4879 SL (models ) Japanese (models) 45C4868 Simplified Chinese (models) Taiwan-TC (models) Hong Kong-TC (models) Korea (models) Multilingual 1 XP-P -- EN, NL, FR, GR, IT(models ) Multilingual 2 XP-P -- EN, DK, FI, NO, SV (models ) 6453 Vista Business 32 Recovery DVDs FRU# English (models)
Page 148
6453 XP Pro Recovery DVDs FRU# English (models) 45R4429 French (models) 45R4430 German (models) 45R4431 Spanish (models) 45R4432 Italian (models) 45R4433 Japan (models) 45R4434 Norwegian (models) 45R4435 Swedish (models) 45R4436 Danish (models) 45R4437 Dutch (models) 45R4438 Finnish (models) 45R4440 Hebrew (models) 45R4441 Russian (models) 45R4443...
Machine Type 6495 Item # 6495 FRUs FRU# Front audio/USB card and cable (included in Cables kit 41R8510) (models) 41R8510 Hard disk drive, 80 GB 7200rpm SATA (models) 40Y9034 Hard disk drive, 160 GB 7200rpm SATA (models) 40Y9035 Hard disk drive, 250 GB 7200rpm SATA(models) 40Y9036 Hard disk drive, 320 GB 7200rpm SATA (models) 87H4891...
Page 153
6495 Adapters and miscellaneous FRUs FRU# Speaker Power brick - China, Thailand (models) 89P8581 Speaker Power brick - Japan (models) 89P8577 Speaker Power brick - Brazil (models) 89P8583 Speaker Power brick - Argentina (models) 41A4901 Speaker Power brick - ANZ (models) 89P8579 Speaker Brick - Korea (models) 41A4903...
Page 154
6495 Power Cords FRU# Power cord (optional) - Australia / New Zealand (models) 42T5135 Power cord (optional) - South Africa (models) 42T5141 Power cord (optional) - Israel (models) 42T5147 Power cord (optional) - China (PRC) (models) 42T5150 Power cord (optional) - Taiwan (models) 42T5156 Power cord (optional) - Korea (models) 42T5162...
Page 155
6495 Windows XP Pro Recovery CDs FRU# IT (models) 45C4867 SP/LA (models) 45C4866 DK (models) 45C4871 NL (models) 45C4872 SV (models) 45C4870 HE (models) 45C4875 FI (models) 45C4874 NO (models) 45C4869 PL (models) 45C4876 PO (models) 45C4880 RU (models) 45C4877 CZ (models) 45C4873 TR (models)
Page 156
6495 Vista Business 32 Recovery DVDs FRU# Korea (models) 46R1341 Slovenian (models) 46R1342 Romanian (models) 46R1343 Portuguese (models) 46R1344 Serbian (models) 46R1345 Slovakian (models) 46R1346 Arbric (models) 46R1347 Hebrew (models) 46R1348 Brazilian Portuguese (models) 46R7475 6495 XP Pro Recovery DVDs FRU# English (models) 45R4429...
This section describes how to update (flash) the BIOS using a CD-ROM or diskette. system program updates are available at http://www.lenovo.com/support on the World Wide Web. 1. To update (flash) the BIOS: v If using a CD-ROM, make sure the computer is turned on. Insert the system program update (flash) CD-ROM into the optical drive.
Power management Power management reduces the power consumption of certain components of the computer such as the system power supply, processor, hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the computer and the setting for Advanced Power Management (APM) BIOS mode is ignored.
Macrovision Corporation. Reverse engineering or disassembly is prohibited. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo ThinkCentre PS/2...
Page 164
Part Number: 43C6257 Printed in USA (1P) P/N: 43C6257...