The DECT handset described in this manual should only be used in combination with DECT systems delivered by NEC. In order to take advantage of all features described in this manual the country and network provider specific features should match the features of the NEC system.
Contents and Accessories The following items are included in the package: Handset unit. Charger unit. Rechargeable AAA size NiMH batteries (1.2V 600mAh, 3 pieces). Power supply unit. Handset Charger Unit 1. LCD screen 8. Charger charge contacts 2. Keypad 9. Power indication 3.
IMPORTANT NOTICE : To obtain best battery performance, charge the handset for 12 hours before initial Only charge the batteries with the C124 handset on the C124 Desktop Charger. Do not use any other charger to this end The C124 is not meant for 24/7 operation Defect handsets or defect or exhausted batteries should never be disposed of as municipal waste.
Display Arrangement Extra display line for dialed digits, calling number, etc. Symbol Indication Received signal strength. If the handset is out of range the display shows: SEARCHING... Keypad lock is activated On: handset is off hook. Flashing: incoming call. The handset speakerphone mode is activated. The handset microphone is muted.
Keypad Arrangement Button In Standby In Conversation In Menu Mode Make or answer a call. Start dialing from phone When switched off: Enquiry / Call transfer. book, redial list, or caller switch on the handset. ID list. Long press this button to End a call.
Normal Operation Making a Call Making a call can be done as follows: Press and dial a number Pre-dial a number and press Select a number from the phonebook and press Select a number from the redial list and press Select a number from the caller list and press Receiving a Call An internal call is indicated by the INT icon on the display and the internal ring...
Menu Functions All essential functions of this handset can be programmed via the Menu / OK button, the Up/Down arrow buttons and the backspace button. The following menu items are available: Caller List The number of an incoming call is displayed by the handset when available. If the number is present in the phone book, the related name will be displayed.
You are prompted to modify the number and the name. Confirm with OK. Redial List To enter the redial list press or from the main menu select REDIAL and press OK. The following functions are available: Copy to Phonebook In the redial list select an entry and press OK. Select COPY TO PHB and press OK.
Handset Name The handset name is displayed in idle mode. Changing the handset name is done as follows: In the main menu select HS NAME and press OK. You are prompted to edit the handset name. Confirm with OK. Registration Menu This handset can be registered to only a single DECT system.
Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations. If no arrangement has been made with NEC Unified Solutions or your supplier, please contact the local authorities for further information.
Page 13
Hiermit erklärt “NEC Unified Solutions”, dass sich das Gerät Íslenska C124 Übereinstimmung grundlegenden Hér með lýsir “NEC Unified Solutions” yfir því að C124 er í Anforderungen übrigen einschlägigen samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í Bestimmungen der Richtlinie 1999/5/EG befindet.
Page 14
Directiva 1999/5/CE. http://www.nec-unified.com/doc Slovensko NEC Unified Solutions “NEC Unified Solutions” izjavlja, da je ta C124 v skladu z Anton Philipsweg 1 bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1223 KZ Hilversum 1999/5/ES.
Page 15
FCC Rules (United States) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.