hit counter script
NEC VERSA FX Service And Reference Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Laptop
  5. VERSA FX
  6. Service and reference manual
NEC VERSA FX Service And Reference Manual

NEC VERSA FX Service And Reference Manual

Hide thumbs Also See for VERSA FX:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual, Manual
NEC Versa Notebook Computer
F X
N E C V
®
E R S A
S E R V I C E A N D
R E F E R E N C E M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for NEC VERSA FX

Summary of Contents for NEC VERSA FX

  • Page 1 NEC Versa Notebook Computer N E C V ® E R S A S E R V I C E A N D R E F E R E N C E M A N U A L...
  • Page 2 The NEC CSD product(s) discussed in this document are warranted in accordance with the terms of the Warranty Statement accompanying each product. However, actual performance of each such product is dependent upon factors such as system configuration, customer data, and operator control.

  • Page 3: Table Of Contents

    Contents Preface ..............................vii Abbreviations............................ix 1 System Overview Getting to Know the NEC Versa......................1-2 Around the Front of the System ......................1-2 LCD Panel............................. 1-2 Base Unit............................1-3 Power Button..........................1-5 Keyboard Panel ..........................1-5 Front Features..........................1-7 Around the Back of the System......................1-8 Around the Left Side of the System ....................
  • Page 4 Performing the BIOS Update....................... 2-21 NEC Utilities ............................. 2-22 NEC Customize Utility........................ 2-22 NEC Customize Utility Screen ..................2-22 Using the NEC Customize Utility ..................2-23 HDPREPEZ Utility........................2-23 Using the HDPREPEZ Utility..................2-23 Application and Driver CD ....................... 2-23 Launching the Application and Driver CD with Windows 98.............
  • Page 5 Quick Troubleshooting ........................7-2 Helpful Questions ..........................7-4 8 Getting Service and Support Services and Support Contact Information ..................8-2 NEC CSD Web Site ..........................8-2 NEC CSD FTP Site..........................8-3 Email/Fax to Support Services......................8-3 NEC CSD Bulletin Board ........................8-3 NEC CSD Support Services........................

  • Page 6: Preface

    Chapter 6, Preventive Maintenance, lists general notebook preventive maintenance procedures. Chapter 7, Troubleshooting, lists troubleshooting procedures as well as helpful servicing hints. Chapter 8, Getting Service and Support, provides information as to how to contact NEC CSD for service information, technical support, and product information.

  • Page 7: Abbreviations

    Abbreviations ampere error checking and correction alternating current enhanced capabilities port Advanced Graphics Port extended data output advanced technology Enhanced Graphics Adapter (IBM PC) enhanced parallel port Bulletin Board Service EPROM erasable and programmable binary-coded decimal BIOS Customized Utility EVGA Enhanced Video Graphics Array BIOS...
  • Page 8 pound slave light-emitting diode SCSI Small Computer System Interface liquid crystal display SDRAM synchronous dynamic least-significant bit random-access memory large-scale integration signal ground mega SIMM single inline memory module milliamps standard page mode maximum Sound Retrieval System megabyte SVGA Super Video Graphics Array Monochrome Display Adapter switch modified frequency modulation...

  • Page 9: System Overview

    System Overview Getting to Know the NEC Versa Around the Front of the System Around the Back of the System Around the Left Side of the System Around the Right Side of the System Around the Bottom of the System...

  • Page 10: Lcd Panel

    Read the following sections and take a tour around the system. Around the Front of the System The NEC Versa FX is compact with features on every side. First, look at the front of the NEC Versa. The following sections describe front features, beginning with the liquid crystal display (LCD) panel.

  • Page 11: Base Unit

    Base Unit The base unit of your NEC Versa FX offers the following features which are described after the figure. LCD panel and base unit A – Keyboard E – Power Button B – Stereo Speakers F – Operating Status LEDs C –...
  • Page 12 B – Caps Lock D – Num Lock  Hard Disk Drive — lights when the NEC Versa writes data to or retrieves data from the internal hard disk drive.  Caps Lock — lights when Caps Lock is in effect.

  • Page 13: Power Button

    Hold the Power button in place for 4 or more seconds to power off the system (power override). Only use this option if you cannot power off your system using Start, Shutdown. Keyboard Panel The NEC Versa keyboard panel offers the following features, which are described after the figure. Keyboard A – Function Keys D –...
  • Page 14 Function keys are application-driven. See the specific application’s user guide for information about how each function key works within the application you are using. The following function key combinations are preprogrammed for the NEC Versa FX computer. Fn-F3 — toggles between three video modes; LCD, CRT, or both (LCD and CRT).

  • Page 15: Front Features

    Microphone — A strategically positioned built-in microphone allows you to record monophonic sound directly into your notebook computer. IR Port — Use this infrared (IR) port to transfer files between your NEC Versa and an IR-equipped desktop or notebook computer or to print to an IR-capable printer.

  • Page 16: Around The Back Of The System

    RJ-11 Jack — Use this jack to connect the internal modem to an analog wall outlet. AC Power Port — Use the power jack to attach the NEC Versa to a DC power source, such as the AC adapter or the optional DC auto adapter.

  • Page 17: Around The Right Side Of The System

    PC card slots — Provide two slots for inserting two Type II PC cards or one Type III PC card. Around the Right Side of the System The right side of the NEC Versa offers the features, which are described after the figure. Right side features A – USB Ports C –...

  • Page 18: Internal Components

    Battery Pack The system uses a rechargeable Lithium-Ion (Li-Ion) battery as its transient power source. The battery pack installs in the compartment on the bottom of the NEC Versa. Hard Disk Drive A standard 2.5-inch, 9.5 mm hard disk drive ships with the system.

  • Page 19: Cmos Battery

    The CMOS battery charges when your NEC Versa is connected to AC power. The CMOS battery may discharge completely if the NEC Versa notebook remains unused for approximately two months..

  • Page 20: Chipset

    ChipSet The following table provides information on the system chipset. System Chipset Chip Manufacturer Description Intel Celeron 333 (not Intel 333 MHz CPU available in the U.S.) 400 MHz CPU Intel Pentium III 400 82440MX Intel System Controller FDC37N869 Standard Microsystems Super I/O SM710 Silicon Motion...

  • Page 21: System Configuration And Setup

    System Configuration and Setup Power Sources for Your NEC Versa BIOS Setup Updating the BIOS NEC Utilities Application and Driver CD...

  • Page 22: Using The Ac Adapter

    Read the following sections for specific information about using the NEC power sources. Using the AC Adapter Use the AC adapter and power cable that came with your NEC Versa to run your computer on alternating current (AC) power, or to recharge the battery pack. Use the AC adapter whenever a wall outlet is nearby.

  • Page 23: Connecting The Ac Adapter

    Connect the AC adapter as follows: Connect the AC adapter cable to the power port on the left side of your NEC Versa. Plug one end of the AC power cable into the AC adapter and the other end into a properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.

  • Page 24: Using The Main Battery Pack

    ! Read the precautions printed on the battery. Determining Battery Status Your NEC Versa system provides tools to help you keep track of the main (and an optional) battery’s power level. If your system is configured (default setting) to display the power icon on the taskbar, an electrical plug displays when the system is connected to an AC power source or a battery icon displays when the system is not connected to an AC power source.

  • Page 25: Low Battery Status

    Power off the system, remove the battery pack and replace it with a fully charged battery. Leave the battery pack in the system and connect your NEC Versa to the AC adapter and a wall outlet. If you connect the system to AC power and keep the system within standard operating temperatures, the battery recharges in approximately 2–3 hours...
  • Page 26 Replace the battery pack installed in your NEC Versa system as follows. Note Use the batteries in the NEC Versa computer for which they are designed. Installing another manufacturer’s battery, or using a combination of very old and new batteries can deteriorate battery and equipment performance.
  • Page 27 Continue to hold the battery release latch as you slide the battery out of the system. Removing the battery A – Battery Bay Connectors C – Lithium-Ion Battery B – Battery Bay Release Latch Insert the new battery as follows: Locate the alignment groove on the edge of the battery.

  • Page 28: Charging The Battery

    Charge the main (primary) battery and secondary (optional) battery by simply connecting your NEC Versa FX system to an AC power source. To monitor the charging activity, observe the battery charging LED on the front of the system. The battery charging LED lights as follows: Lights amber when the primary battery is charging.

  • Page 29: System Batteries

    BIOS Setup Your NEC Versa FX computer comes with a hardware program called BIOS Setup that allows you to view and set system parameters. BIOS Setup also allows you to set password features that protect your system from unauthorized use.

  • Page 30: Pausing The Screen

    If the system detects an error during POST, it prompts you with a double beep and a message: “Press <F1> to resume.” If you press , the system enters BIOS Setup automatically. If you want to fix the error, carefully read the error message that appears above the prompt (taking notes if you want), and press .

  • Page 31: Looking At Screens

    Looking at Screens BIOS setup screens have three areas as shown next. Advanced CMOS Setup Parameters — The left side of the screen. This area lists parameters and their current settings. Available Options and Help — The right side of the screen. This area lists alternate settings and Help text for each parameter.

  • Page 32: Checking/Setting System Parameters

    Boot Sector Virus Disabled Enabled Protection Date — Sets your NEC Versa’s calendar month, day and year. The calendar clock is year 2000-compliant. These settings remain in memory even after you turn off system power. 2-12 System Configuration and Setup...

  • Page 33: Advanced Cmos Setup

    To set the date use the or arrow keys to move from field to field. Use the Fn-PgUp key to change the numbers within each field. Fn-PgDn System Memory — Displays the amount of system memory currently installed in your system.

  • Page 34: Security Protection

    Assign Supervisor Password — Establishes password protection for entering the BIOS setup utility, booting the system, and resuming from Standby. (Resume from Standby, not applicable in Windows 98 with ACPI.) Assign User Password — Establishes a user password once a supervisor password is set. Boot Password Required —...

  • Page 35: Power Management Setup

    Power Management Setup Your Versa FX system ships with the Windows 98 operating system that uses the Advanced Configuration and Power Interface (ACPI) to control most power management functions through the Power Management Properties screen in Windows. The BIOS Power Management Setup screen is described next.
  • Page 36 Use while traveling long distances.  Off — disables power management and all device timeouts. Works well in an office environment while powering your NEC Versa with AC power.  Custom — lets you define power management levels and specific device timeouts according to your own needs and present environment.

  • Page 37: Boot Device Setup

    Bootable device when set to IDE hard drive. Only one IDE device is allowed to be bootable. Quick Boot — Specifies whether the system performs all tests during system boot. Silent Boot — Specifies whether to display the NEC logo during the system boot. Boot Display Device — Specifies the display device(s) for system boot messages.

  • Page 38: Peripheral Setup

    Peripheral Setup In the Windows 98 environment, most device management is controlled through the Windows device manager. Use the Windows device manager to enable and disable devices on your NEC Versa FX system. The Peripheral Setup menu displays the connection locations between the system and the Input/Output (I/O) ports and lets you specify different port assignments as needed.

  • Page 39: Other Bios Setup Options

    Once refreshed, your battery is conditioned to recharge to its full capacity. To recharge the battery, connect your NEC Versa to AC power. This process may take up to four hours to complete. Auto Configuration with Defaults — Loads default configuration settings.

  • Page 40: Preparing The Bios Update Diskette

    Preparing the BIOS Update Diskette Before using the BIOS update diskette you must make the diskette BIOS flash ready. Refer to the readme.txt file on the diskette before using the diskette. Follow these instructions to prepare the BIOS Update Diskette. Scan your hard drive for any computer viruses.

  • Page 41: Performing The Bios Update

    Remove the screw and bay cover. Locate the dip switch block. Using a fine-tipped object, change switch 5 to “ON” to enable BIOS flash. Never use a pencil to change switch settings. Residue from the pencil can damage the system. BIOS flash switch enabled Dip switches 2, 3, 4, and 5 set to “On Note...

  • Page 42: Nec Utilities

    HDPREPEZ Utility NEC Customize Utility In Windows 98 systems the NEC Customize utility gives you the option to install or launch: Application and Driver CD — Use this option to install a variety of software applications, drivers, utilities, internet browsers, and the NEC Info Center.

  • Page 43: Using The Nec Customize Utility

    A variety of third-party software applications, drivers, utilities, internet browsers and the NEC Info Center are provided on the Application and Driver (A&D) CD for the NEC Versa FX that ships with your system. Some of the drivers are already installed as part of your operating system environment.

  • Page 44: Launching The Application And Driver Cd With Windows 98

    Launching the Application and Driver CD with Windows 98 Follow these procedures to launch the Application and Driver CD using NEC Customize with Windows 98. Insert the Application and Driver CD into the CD-ROM drive. Double click the NEC Customize icon, if necessary.

  • Page 45: Disassembly And Reassembly

    Disassembly and Reassembly Required Tools and Equipment Disassembly Reassembly...

  • Page 46: Battery

    Required Tools and Equipment All NEC Versa FX corrective maintenance procedures can be performed using the following tools: Tweezers Small flat-head screwdriver Small Phillips screwdrivers (# 1 and # 0) Right-angled dentist-style probe. Disassembly This section contains step-by-step disassembly procedures for the system. Reassembly is the reverse of disassembly.
  • Page 47 Slide the battery release latch toward the right side of the system and hold firmly. Locating the battery bay release latch A – Lithium-Ion Battery B – Battery Release Latch Continue to hold the battery release latch as you slide the battery out of the system. Removing the battery A –...

  • Page 48: Memory Module And Switch Settings

    Memory Module and Switch Settings Use the following steps to remove the memory module and access the switch settings. Close the LCD panel. Turn over the system and locate the memory module bay. Locating the memory module bay A – Memory Module Bay Cover B –...

  • Page 49: Switch Settings

    Switch 1, Password Override Switch — The default setting is “OFF.” If you forget your password and cannot access the data on your NEC Versa, change the setting to “ON” and your current password is erased.

  • Page 50: Keyboard

    Keyboard Use the following steps to remove the keyboard assembly. Make sure that the system is powered off and that no peripheral devices are attached. Locate the three keyboard locking tabs: one on the upper left of the keyboard, one above the F8 key, and the other on the upper right of the keyboard.

  • Page 51: Versaglide Assembly

    VersaGlide Assembly Use the following procedure to remove the VersaGlide assembly. Close the LCD panel and turn the system over. Locate and remove the two bottom screws securing the front cover assembly to the system. Locating/Removing the bottom screws A – Screw Turn the system over and open the LCD panel.
  • Page 52 Slowly remove the front cover assembly by unsnapping the sides from the system base unit. Do not lift the front cover away from the system. Disconnect the two cables from connectors P9 and P10 from the main board. Slide the cables out from under the bar and lift the front cover away from the system.

  • Page 53: Top Cover

    Top Cover Use the following procedure to remove the top cover assembly. Close the LCD panel and turn the system over. Remove the screw in the battery bay. Locate and remove the screws securing the top cover to the system. Remove the foot closest to the battery bay and remove the screw under the foot.

  • Page 54: Hard Disk Drive

    Locate and remove the four screws securing the top cover assembly. Locating/Removing the four screws A – Screw Remove the Internet key cable from connector P22 on the main board. Lift the top cover assembly up and slightly to the right from the system. Hard Disk Drive Use the following steps to remove the internal hard disk drive.

  • Page 55: Pc Card Assembly

    Carefully remove the drive cable connector from the hard disk drive. Removing the hard disk drive A – Hard Disk Drive B – Hard Disk Drive Cable Connector PC Card Assembly Use the following procedure to remove the PC card assembly. Remove the keyboard, front cover assembly, and top cover assembly from the system.

  • Page 56: Led Status Board

    LED Status Board Use the following steps to remove the LED status board. Remove the keyboard, front cover assembly, top cover assembly, and PC card assembly from the system. Disconnect the LED status board cable from connector P23 on the main board. Locate and remove the screw that secures the board to the system.

  • Page 57: Bridge Battery

    Locate and remove the two screws that secure the IR/sound board to the system. Lift the board out of the system. Removing the IR/sound board A – IR/Sound Board B – Screw Bridge Battery Use the following steps to remove the bridge battery. Remove the keyboard, front cover assembly, top cover assembly, and PC card assembly from the system.

  • Page 58: Speakers

    Speakers Use the following procedure to remove the speakers. Remove the keyboard, front cover assembly, and top cover assembly from the system. Locate the two speakers in the upper left corner and upper right corner inside the system. Locating the speakers A –...
  • Page 59 Locate and remove the screws that secure the LCD panel to the system. Locating/Removing the LCD panel screws A – Screw Locate and remove the screw securing the fan plate. Locating/Removing the fan plate screw A – Screw Disassembly and Reassembly 3-15...
  • Page 60 Locate and remove the four screws that secure the main board in the system. Locating/Removing the main board screws A – Screw Carefully lift the main board. Lift and remove the video/USB board. Disconnect the connector board from the main board. Turn the main board over.

  • Page 61: Reassembly

    Locate the CMOS battery. Disconnect the cable from connector P15 on the main board and lift the CMOS battery off of the main board. Removing the CMOS battery A – CMOS Battery Reassembly Reassembly is the reverse of the disassembly process. Use care to insure that all cables and screws are returned to their proper positions.

  • Page 62: System Board Layout

    System Board Layout LED Status Board IR/Sound Board Connector Board Video/USB Board Main Board...
  • Page 63 This following figures show the system boards and connector locations. LED Status Board A – Connector P40 (back side) IR/Sound Board A – Connector P41 (back side) Connector Board A – Connector P34 D – Connector P20 B – Connector P32 E –...

  • Page 64: Main Board

    Video/USB Board A – Connector P35 Main Board A – Connector P18 H – Connector P26 B – LCD Cable Connector I – Connector P9 C – Connector P24 J – Connector P27 D – Connector P22 K – Connector P25 E –...

  • Page 65: Illustrated Parts Breakdown

    Illustrated Parts Breakdown Illustrated Parts Breakdown Parts List...
  • Page 66 Illustrated Parts Breakdown 5-2 Illustrated Parts Breakdown...

  • Page 67: Parts List

    Parts List The following table contains a listing of the field-replaceable parts and corresponding part numbers. Field-Replaceable Parts List Item Description Part Number LCD Panel Sub Assembly 12.1-inch SVGA 12.1-inch XGA 10.4-inch SVGA Keyboard 808-897405-001A Top Cover Assembly 136-275492-042A Fan/Heat Plate 136-648248-002A Front Cover Assembly Without VersaGlide 136-275492-043A...
  • Page 68 Field-Replaceable Parts List Item Description Part Number Right Mouse Button 136-649053-001B Hard Disk Drive FPC 808-879497-001A LED Status Board FFC 808-847603-008A Modem Board Cable 808-742873-003A Memory Modules 32-MB 136-275691-035A 64-MB 136-275492-010A Diskette Drive/Parallel Port Cap 136-649740-001A External Monitor Port Cap 136-649742-001A USB Cap (1 Port) 136-649743-001A...
  • Page 69 Field-Replaceable Parts List Item Description Part Number Rubber Cap 136-649446-001A Top Cover (9-Cell Battery) 136-275492-702A Bottom Base (9-Cell Battery) 136-275492-703A Coin Lock (9-Cell Battery) 136-649054A Coin Lock Spring (9-Cell Battery) 136-649101-001A Coin Lock Hook (9-Cell Battery) 136-649038-001A Front Bracket (9-Cell Battery) 136-649035A Connector Plate (9-Cell Battery) 136-649037A...

  • Page 70: Preventive Maintenance

    Preventive Maintenance Cleaning the Notebook Exterior Cleaning the Notebook Interior Protecting the Disk Drive and Diskette Drive Handling the Battery Pack Maintaining the LCD Quality...

  • Page 71: Protecting The Disk Drive And Diskette Drive

    Preventive maintenance is limited to cleaning the plastic case, the keyboard, the display screen, and the diskette drive heads, as required. Note Remove the battery and disconnect the AC adapter before performing any maintenance. Voltage is present inside the system unit and LCD even after the system is turned off.
  • Page 72 Use hard disk maintenance program like DEFRAG under DOS, or acquire Norton Utilities SPEEDISK programs. These programs reorganize your hard disk by eliminating fragmentation and improve the hard disk access time. Handling the Battery Pack The battery pack furnished with the computer requires reasonable care and handling to ensure efficient operation and maximum life.

  • Page 73: Troubleshooting

    Troubleshooting Quick Troubleshooting Helpful Questions...

  • Page 74: Quick Troubleshooting

    Quick Troubleshooting This section summarizes problems that may develop during system operation and lists suggested corrective actions. Quick Troubleshooting Problem Corrective Action No power Check that the AC adapter is plugged into the power connector of the system. Also, check that the AC adapter is plugged into a properly grounded AC power outlet.
  • Page 75 If the PC card is a Type II card, install it in the system’s other PC card slot. Replace the PC card. Replace the main board. NEC VersaGlide does not work Check if PS/2 or Alps mouse driver is properly installed. Check VersaGlide cable inside the system if it is inserted properly.
  • Page 76 Helpful Questions Here are some helpful questions to ask when troubleshooting the notebook: Is there any external power source connected to the computer? Is the battery fully charged? Is the computer turned on and the Power LED activated? Is the LCD display switched to the external monitor? Are all cables and devices connected properly and securely? Are all needed device drivers installed properly? Is the Suspend Mode activated? Press any key or slide the Power/Sleep button to the...

  • Page 77: Getting Service And Support

    Getting Service and Support Service and Support Contact Information NEC CSD Web Site NEC CSD FTP Site Email/Fax to Support Services NEC CSD Bulletin Board NEC CSD Support Services NEC CSD Customer Assistance Center...

  • Page 78: Services And Support Contact Information

    NEC CSD Web Site If you have a modem or a network board, you can access the NEC CSD web site. You can do this through a commercial online service or through your Internet account. The NEC CSD web site contains general information about NEC CSD and its products, an online store, press releases, reviews, and service and support information.

  • Page 79: Nec Csd Ftp Site

    You will receive a response to your questions within one business day. NEC CSD Bulletin Board If you have access to a modem, you can use the NEC CSD Bulletin Board System (BBS) to get the latest information on hardware and software. The BBS allows you to download files (video drivers, printer drivers, BIOS updates, etc.) to a diskette for system enhancements and upgrades.

  • Page 80: Nec Csd Support Services

    Services is for U.S. and Canadian customers only; international customers should contact the local NEC office or dealer for the support and service available in your country.) Direct assistance is available 24 hours a day, 7 days a week. Call the NEC CSD Support Services, toll free, at 1-800-632-4525 (U.S.

  • Page 81: Nec Csd Customer Assistance Center

    Please have available your system’s name, model number, serial number, and as much information as possible about your system’s problem before calling. For outside the U.S. or Canada, please contact your local NEC office or dealer for the support and service available in your country.

  • Page 82: Specifications

    Specifications System Components Connector Locations Memory Map Interrupt Controllers...
  • Page 83 System Components The following system component specifications are standard except where noted. System Processor Intel low voltage 333-MHz CPU (not available in the U.S.) Intel 400-MHz Pentium III CPU Architecture 64-bit Peripheral Component Interconnect (PCI) Random Access Memory Standard Main Memory ...
  • Page 84 DC In — 1 port, for AC adapter cable USB port — 3 ports, 4 pin Modem — 1 port, 4-pin, RJ-11 modular jack Speakers Two built-in, 1 watt (W) each with a maximum 3W output 16-bit stereo, 48 Khz Sound BlasterPRO compatible MIDI Roland: MPU401, UART Mode compatible ESS Solo1 PCI AudioDrive + ESS 1946S...
  • Page 85 Hard Disk Drive Specifications vary depending upon model: Ultra DMA/66 support Capacity — Internal 6.x or 12.x GB Drive height — 9.5 mm Read/write track-to-track seek rate — 3 ms Average seek time — 12 ms – 14 ms Revolutions per minute — 4200 Data transfer rate ...
  • Page 86 Power AC Adapter Input Voltage — 100 to 240 volts (V) AC, 50 or 60 Hz, 1.5 A Output Voltage — 15.0 V DC, 45 Watt Australia, Europe and Asia use an AC power cable specific to each country’s standards. Battery Pack Type —...
  • Page 87 Connector Locations The following table shows the system’s connector locations. Connector Locations Connector Location Main Board Main Board Main Board Main Board Main Board Main Board Main Board Main Board Connector Board Main Board Main Board Connector Board Connector Board Connector Board Connector Board 9-6 Specifications...
  • Page 88 Memory Map The system supports system and video shadowing, both controlled through complementary metal oxide semiconductor (CMOS). The system supports BIOS as a cacheable area with write protection. The following table shows the system’s memory map. System Memory Map Memory Space Size Function 0000 0000h-0009 FFFFh...
  • Page 89 Interrupt Controllers Using interrupts, hardware can request software services. If non-Plug and Play software is being used, the interrupt may need to be moved for software application or driver compatibility. Some interrupts cannot be moved. Fifteen interrupts can be used with a cascade connection of 8259INTC x 2.

  • Page 90: Glossary

    AC Adapter A device that connects an NEC Versa portable computer and an AC wall outlet to provide AC power for running the system or recharging the battery. Advanced Graphics Port is an interface specification designed for the throughput demands of 3D graphics.
  • Page 91 Electronic timer used to synchronize computer operations. CMOS Complementary Metal Oxide Semiconductor. A chip that contains nonvolatile memory in the NEC Versa. CMOS is backed up by an internal lithium battery that preserves clock/calendar data and system configuration parameters stored in CMOS. cold boot Process of starting up the computer by turning on the power.
  • Page 92 (KB) 1024 bytes. Local Area Network. Liquid Crystal Display. An LCD consists of a thin sandwich of two glass plates with sealed edges, containing nematic liquid-crystal material that forms the screen image. The NEC Versa displays are LCD type. load To copy a program into the computer's memory from a storage device.
  • Page 93 Usually contained on a single chip that includes an arithmetic logic unit, control logic, and control-memory unit. mode A method of operation; for example, the NEC Versa operates in either normal or power- saving modes. modem MOdulator-DEModulator. A device that links computers over a telephone line.
  • Page 94 parameter A characteristic of a device or system. password A string of characters that the user must enter before the system allows access or system privileges. PCMCIA A credit card sized peripheral interface standard for portable devices. Types of PCMCIA cards currently offered by major vendors include fax/modems, LAN, storage cards, and wireless communications devices.
  • Page 95 The main printed circuit board inside the system unit into which other boards and major chip components, such as the system microprocessor, are connected. Thin Film Transistor. A type of NEC Versa LCD color screen that supports 256 colors and provides exceptional screen display.
  • Page 96 warm boot Process of resetting the computer without turning off the power through keyboard input (pressing Ctrl, Alt, and Del keys simultaneously) or the reset button. The system returns to an initial or arbitrarily selected condition. write To record or store information to a storage device. Glossary 7...
  • Page 97 Cursor control keys, 1-6 web site, 8-2 NEC Customize, 2-22 using, 2-23 Dimensions NEC utilities, 2-22 system, 9-5 NEC Versa disassembly sequence, 3-2 Dip switch settings, 3-5 NEC VersaGlide, 1-5 Diskette drives, 2-13 Numeric keypad, 1-6 Entering BIOS setup, 2-9 Panel brightness, 2-16...
  • Page 98 Peripheral Component Interconnect (PCI), 1-2 Supervisor password, 2-14 Power button, 1-4, 2-15 Suspend mode, 2-16 Power management under AC, 2-15 Suspend warning tone, 2-16 Power Status LED, 1-7 Switch settings, 3-5 Powering on, 2-3 System date, 2-12 Power-on self test (POST), 2-9 System features front, 1-2 System switch, 2-15...
  • Page 99 This product is in conformity with the protection requirements of EC Council Directive 89/336/EEC on the approximation of laws of the Member States relating to electro-magnetic compatibility. This product satisfied the Class B limits of EN 55022. NEC Computer Systems Division 6000 Florin-Perkins Road Sacramento, CA 95828-1037...
  • Page 100 A lithium battery in some computers maintains system configuration information. In the event that the battery fails to maintain system configuration information, NEC CSD recommends that you replace the battery. For battery replacement information, call your NEC CSD dealer or the NEC CSD Customer Assistance Center.
  • Page 101 819-200605-000 NEC Computer Systems Division 6000 Florin-Perkins Road 12/99 Sacramento, CA 95828-1037 www.nec-computers.com...

Table of Contents