CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
9. Remove the KEYMAT S60 and protect the inner side of the A-
COVER with a film.
11. Unscrew the Torx Plus ® size 6 SCREWS in the order shown.
assembly use the reverse order with a torque setting of 14Ncm.
13. Hold the FLEXI CONNECTOR pressed while opening the LCD K2
connector.
Note! Do not over stress the FLEXI when disconnecting.
15. Place the SS-93 between the LCD K2 and the UI FRAME ASSY and
release the snaps on both sides.
Service Manual N80 RM-9/RM-92
Page
3
(27)
CONFIDENTIAL
10. Protect the LCD ASSY with a film.
For
12. Remove the UI-KEYMAT PWB S60 ASSY.
14. Unlock the LCD K2 from the UI FRAME ASSY with the SS-93.
16. Now remove the LCD K2.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
29.Mrz.2007