CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
17. Unscrew the Torx Plus ® size 6 SCREWS.
the screws with a torque setting of 14Ncm.
19. Push out the EARPIECE.
21. Lift up the 1MJ UI PWB ASSY with the SRT-6 carefully. Do not
damage the two snaps on both sides of the FLEX I/CONN MODULE.
23. Take special care when opening the FLEX I connector.
Service Manual N80 RM-9/RM-92
Page
CONFIDENTIAL
For assembly: tighten
18. Remove the UI SUPPORT.
SUPPORT it is important to place it under the marked edge.
20. Unlock and remove the VGA CAMERA with the SS-51. Note the
guide pin when re-assembling the CAMERA.
22. Gently, lift a bit the UI PWB.
24. Place the SRT-6 exactly as shown and slide it gently along the
edge of the connector.
4
(27)
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
29.Mrz.2007
NOTE! When assembling the UI
MGR