CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
33. Open snap 5.
35. Remove the ITU KEYMAT.
37. Close the SLIDE ASSY.
39.
Do not pull the SLIDE ASSY apart, unless replacement is
necessary.
Service Manual N80 RM-9/RM-92
Page
6
(27)
CONFIDENTIAL
34. Remove the KEYMAT BEZEL.
36. Unscrew the Torx Plus ® size 6 SCREWS in the order shown. For
assembly use the reverse order with a torque setting of 23Ncm.
Always use new SCREWS when re-assembling the unit.
38. Remove the UI FRAME SPARE include the ENGINE SHIELD ASSY.
For assembly only!
40.
Mind the correct assembling when connecting the FLEX I/CONN
MODULE to the ENGINE MODULE.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
MGR
29.Mrz.2007