Back to Contents Page
Adding and Replacing Parts
Dell™ Latitude™ D600 Systems User's Guide
Adding Memory
Adding a Mini PCI Card
Replacing the Hard Drive
Removing and Replacing the Hinge Cover and Keyboard
Connecting a Television to the Computer
Adding Memory
You can increase your computer memory by installing memory modules on the system board. See "Memory" for information on the memory supported by your
computer. Be sure to add only memory modules that are intended for your computer.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
CAUTION:
1. Save and close any open files, exit any open programs, and shut down the computer.
2. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.
3. Remove all installed batteries, and disconnect the AC adapter cable and any external devices from the computer. Wait 5 seconds before proceeding.
4. Ground yourself by touching a metal connector on the back of the computer, and continue to do so periodically during this procedure.
NOTICE:
5. Turn the computer over, remove the screw from the memory module cover, and lift the cover.
NOTICE:
6. If you are replacing a memory module, remove the existing module.
NOTICE:
a. Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
b. Remove the module from the connector.
Downloaded from
www.Manualslib.com
Before working inside your Dell™ computer, read the safety instructions in your Product Information Guide.
While you work, periodically touch unpainted metal on the computer to dissipate static electricity that might harm internal components.
To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
Handle memory modules by their edges, and do not touch the components on a module.
manuals search engine