Table of Contents
Advertisement
3 - 56 Omnii Hand-Held with Windows CE 6.0 User Manual
NOTE
Your Omnii comes preconfigured from the factory for internal scanner types.
The type of scanner installed can be determined from the System icon in the
Control Panel, under the System Properties tab.
IMPORTANT
Keep in mind that some barcode types are only available when an internal imaging scanner is installed. All
internal scanners can be configured using these dialog boxes.
Restoring Default Settings
If you want to restore the factory defaults after making changes, the defaults can be applied to a selected
parameter, sub-tree of parameters or all scanner parameters.
•
Press and hold on a symbology (e.g., Code 128) to display a pop-up menu.
•
Choose Default subtree to reset only the parameters in the symbology you selected, or choose Default
all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
•
Press and hold on the parameter you want to reset.
•
Choose Default parameter to reset the parameter to the default setting.
To improve the decode speed and performance, enable (set to on)
only those codes that are required by the application.
For information on configuring the barcode symbologies, see
Appendix C: "Scanner
Settings".
- Quick Links:
- Wi-Fi Config
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
