Advertisement
Quick Links
Installing the IR Extender
The Cisco
®
IR (infrared) Extender allows you to install your
set-top in an inconspicuous location, such as on a bookcase
or inside a cabinet, and control the set-top with your remote
control.
CATV CONVERTER
MADE IN MEXICO
MCARD SN: PXCPRPSLV
MCARD MAC: 00 1BD73E17D9
MULTI-STREAM CABLE CARD
THIS DEVICE IS INTENDED TO BE ATTACHED TO A RECEIVER THAT
IS NOT USED TO RECEIVE OVER-THE-AIR-BROADCAST SIGNALS.
CONNECTION OF THIS DEVICE IN ANY OTHER FASHION MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS AND IS IN
VIOLATION OF THE FCC RULES, PART 15.
1
Plug the connector into the IR port on the back of
the set-top.
2
Peel the paper backing from the adhesive pad
on the bottom of the receiver. Then, mount the
IR Extender receiver in an inconspicuous place,
but make certain that nothing blocks the sensor
on the front of the receiver.
To control the set-top, press the keys on the
remote control while aiming the remote control at
the sensor on the receiver.
Note: If you encounter problems, make sure that all
connections are secure and that nothing blocks the
path between the receiver and your remote control.
For further assistance, contact your service provider.
Important: Do not block the sensor on the
front of the receiver, or you cannot control the
set-top with your remote control.
Place the sensor away from compact
fl uorescent light, plasma TV displays, or LCD
HDTVs. The sensor signal may be blocked
when placed too close to these types of
devices, and the remote control will no longer
function properly.
STB SN:
SABPQTMNWW
eCM MAC:
01CEA05D679
CABLE
CABLE
IN
OUT
CH+
VOL-
VOL+
SELECT
CH-
GUIDE
CAUTION: If installing the set-top in an enclosed
area, such as a bookcase or cabinet, provide
proper ventilation to prevent damage to the set-top.
See the user guide that came with your set-top for
ventilation requirements.
DIGITAL
S
V
L
R
AUDIO
D
OUT
IR
H
D
L
R
Y
Pb
Pr
OPTICAL
S-VIDEO
AUDIO OUT
OUT
INFO
EXIT
SETTINGS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS:
ETHERNET
RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR
120 V ~
60Hz 3A
1394
120V~
60Hz 50W
USB
LISTED 36MW
VIDEO PRODUCT
T13938
Explorer 4650HDC
POWER
T13839
Advertisement
Related Manuals for Cisco IRE5712M
Summary of Contents for Cisco IRE5712M
- Page 1 Installing the IR Extender The Cisco ® IR (infrared) Extender allows you to install your CAUTION: If installing the set-top in an enclosed set-top in an inconspicuous location, such as on a bookcase area, such as a bookcase or cabinet, provide or inside a cabinet, and control the set-top with your remote proper ventilation to prevent damage to the set-top.
-
Page 2: Fcc Compliance
Cisco, Cisco Systems, the Cisco logo, the Cisco Systems logo, and Scientifi c Atlanta are registered trademarks or trademarks of Cisco Systems, Inc. and/or its affi liates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners.