Chute Assy In - Brother HL-4200CN Service Manual
Color laser printer
Hide thumbs
Also See for HL-4200CN:
- User manual (166 pages) ,
- Network user's manual (63 pages) ,
- Quick setup manual (41 pages)
Table of Contents
Advertisement
2.3.19
Chute ASSY IN
Note:
In the following step, lock the chute ASSY IN to the printer with latch at A to prevent the
chute ASSY IN from drop off.
1) Remove the connectors on the S-HVPS from the left side of the printer.
2) Remove the connectors from the connector bracket on the left side of the printer.
3) Disconnect the connector of harness ASSY FSR3 (FSR32) from the left hand side of
a printer.
4) Shift the harness of the connectors removed above from the bottom portion of the
HSG ASSY BIAS on the left side of the printer.
5) Remove the connector on the PWBA DRV HBN on the right side of the printer.
6) Remove the connector on the LVPS on the right side of the printer.
S-HVPS
Chute ASSY IN
PWBA DRV HBN
Fig.4-58
- IV-33 -
Chute ASSY IN
Left side view
LVPS
Right side view
Advertisement
Chapters
Table of Contents
