Install the Ink Tanks
1
Press the power button to turn on the
printer.
4
Instructions on ink tank installation
are shown on the display screen. As
instructed, grab the handle on the ink tank
cover to open it.
7
Open the pouch and remove the ink tank .
•
Never touch the ink holes (a)
or metal contacts (b). Touching
these parts may cause stains,
damage the ink tank , and affect
print quality.
•
Avoid dropping the ink tank after
removing it from the pouch.Otherwise,
ink may leak and cause stains.
•
Do not remove and shake ink tanks that
have already been installed in the printer
because ink may leak out.
10
Repeat steps 5 to 9 to install all of the ink
tanks .
Install the 5 ink tanks.
2
When the following screen appears, use
the ▲ and ▼ keys to select a language
and press OK.
5
While pressing the stopper of the ink tank
lock lever inwards, open the ink tank lock
lever upwards.
8
Insert the ink tank into the holder facing
as shown, with the ink holes down.
a
b
•
If the ink tank does not fi t in the holder,
make sure the color of the ink tank lock
lever matches the color of the ink tank , and
check the orientation of the ink tank .
11
Close the ink tank cover .
Language
English
Français
Data
Italiano
Deutsch
Message
3
3
Select your local time zone and press OK.
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
Data
+3:Moscow
+4:Eerevan,Baku
Message
Power
Load
FEED
Cut
Menu
Stop
Back
Navigate
6
Shake the ink tanks gently 1 to 2 times
before opening the pouch.
•
Failure to shake ink tanks may result in
reduced print quality because ink ingredients
have settled on the bottom of the tank.
9
Close the ink tank lock lever until it clicks
into place. Make sure the ink lamp is lit in
red.
•
If the ink lamp is not lit, repeat steps 5 and
9.