Miele CVA 6800 Quick Start Manual
Built-in
Hide thumbs
Also See for CVA 6800:
- Operating and installation instructions (180 pages) ,
- Installation instructions manual (21 pages) ,
- Technical information (121 pages)
Advertisement
Quick Links
Cleaning and care
Descaling
Cleaning the milk pipework
Degreasing the brew unit
Descaling must be carried out and takes
approx. 20 minutes.
ĺ
The milk pipework must be cleaned with
After 200 portions have been dispensed,
You will need 2 descaling tablets.
Degrease the brew unit " will appear in the
the cleaning agent. Cleaning takes approx.
"
7 minutes.
display. This message will not go out until
The descaling process cannot be
the brew unit has been degreased.
cancelled once it has started. The
You need one sachet of the Miele cleaning
process has to be carried through to the
agent for milk pipework.
You need 1 Miele cleaning tablet to
end.
degrease the brew unit. The process takes
The cleaning process cannot be
ĺ
approx. 10 minutes.
Maintenance " in the main
cancelled once it has started. The
Touch "
Descale the appliance ".
process has to be carried through to the
The cleaning process cannot be
menu and then "
end.
cancelled once it has started. The
The descaling process will now start.
ĺ
ĺ
process has to be carried through to the
Maintenance " in the main
Follow the instructions in the display.
Touch "
end.
Clean the milk pipework ".
menu and then "
ĺ
Touch "
Maintenance " in the main
The process will start.
ĺ
menu and then "Degrease the brew
Follow the instructions in the display.
unit".
The process will start.
ĺ
Follow the instructions in the display.
Place a cleaning tablet in the ground
When "
coffee chute and close the chute " appears in
ĺ
the display:
Fill the water container with lukewarm
water up to the level marker and drop
2 descaling tablets in it. Replace the
ĺ
water container.
Fill the water container with lukewarm
water up to the level marker and add
Follow the instructions on the packet for
the mixing ratio carefully. It is important
1 sachet of Miele milk pipework cleaning
that you fill the water container with the
agent to it. Replace the water container.
correct amount of water (not less or
Rinse and refill the water container "
When "
more), otherwise descaling will be cut
appears in the display:
ĺ
ĺ
short and must then be repeated.
Remove the coffee chute cover and
Remove the water container and rinse it
open the lid of the coffee chute. Place a
When "
Rinse the water container and fill with
carefully with clean water.
fresh tap water up to the symbol " appears
cleaning tablet into the coffee chute.
ĺ
Make sure that no cleaning agent is left
Follow the further instructions given in
in the display:
in the water container.
ĺ
the display.
Remove the water container and rinse it
The cleaning process is finished when
carefully with clean water.
The brew unit has been degreased when
Process finished " appears in the display.
"
Process finished " appears in the display.
"
Make sure that no descaling agent is left
in the water container.
Process
Descaling is finished when "
finished " appears in the display.
Tips for use
Changing the portion size or
Setting the drink parameters
Profiles
ĺ
drink parameters
Drink parameters "
Touch "
You can set up individual user profiles and
The following parameters can be set:
save individual portion sizes for all drinks
The changed portion size or drink
for each profile.
parameter is always stored in the current
– Amount of coffee
profile.
The name of the current profile is shown in
– Brew temperature
The name of the current profile is shown in
the top left of the display.
– Pre-brewing
the top left of the display.
ĺ
OK " when you have set the
Touch "
Accessing a profile
ĺ
Start in the drinks menu.
parameters to your requirements.
ĺ
Profiles " in the main menu or
Touch "
Place the desired cup under the central
Profiles " in the bottom right of the
touch "
Resetting drinks
spout.
Drinks menu.
ĺ
Process " and then " Change drink ".
Touch "
To reset the portion sizes and the
ĺ
parameters for all drinks back to their
Creating a profile
Swipe the screen until the drink you
ĺ
factory default setting:
want appears, then touch it to select it.
ĺ
Touch "
Create profile ".
Process " in the Drinks menu and
Change the portion size " or
Touch "
You can now "
The keyboard will open in the display.
Reset drinks ".
Drink parameters ".
then "
ĺ
programme "
Enter the name you want and touch
"
Reset all drinks to default? " will appear in
OK ".
"
Changing the portion sizes
the display.
ĺ
ĺ
If you have already created a profile, the
Yes ".
Change the portion size ".
Touch "
Touch "
following options are available to you:
The desired drink will be prepared and
– Select profile
"
Save " will appear in the display.
ĺ
– Change name
Save " when the cup has been
Touch "
– Delete profile
filled to the level you want.
– Change profile
If you want to change portion sizes for
Manually ",
(The coffee machine changes "
Cappuccino, Latte macchiato or Caffè
After each use " or " When switched on ").
"
latte, the ingredients will be shown in the
display.
ĺ
Processing drinks for a profile
Touch the ingredients you want to set
the portion size for.
You can create your own drinks for each
profile and set the portion size and drink
The ingredients selected will have a tick
parameters individually.
beside them.
ĺ
You can change the names of drinks in a
OK ".
Touch "
profile.
ĺ
Touch "
Save " when the amount you want
Select the profile you want.
of the particular ingredient has been
dispensed.
ĺ
Creating a drink
ĺ
Save the portion size required for the
Touch "
Create drink " and select the
selected ingredients.
required drink from the standard drinks.
The programmed mix of ingredients and
ĺ
Change the drinks parameters as
portion sizes will now be dispensed every
required. Save the amount you want of
time that particular drink is selected.
the individual ingredients.
Tip: You can cancel portion size
programming as long as "
Stop " is showing
in the display.
Settings
After dispensing, the keyboard will open in
Changing settings
ĺ
the display.
ĺ
OK " to save the setting.
Touch "
ĺ
Settings " in the main menu
Select "
Enter a name for the new drink and
ĺ
Tip: Touch to return to the previous
Save ".
Select the menu option you want and
touch "
menu.
change the setting as required.
If you have already created a drink, the
following options are available to you:
– Change drink
– Delete drink
Option
Available settings
Notes
You can save a maximum of 9 drinks in a
Language
Deutsch, English and other languages
Tip: If you select the wrong language by mistake, you can find the "
profile.
Country
flag symbol .
Time
Display (On / Off / Night dimming)
Your choice of display will affect the energy consumption of your coffee machine. A message about
MyMiele
Clock type (Analogue / Digital)
this will appear in the display.
Clock format (12 h / 24 h)
You can display drinks you make
frequently, drinks from profiles and
Set
maintenance programmes in the MyMiele
Date
Year / Month / Day
screen.
Timer
Timer 1 (Switch on at, Switch off at, Switch
For "
off after)
must be allocated.
Opening the MyMiele menu
Timer 2 (Switch on at, Switch off at)
ĺ
MyMiele " in the main menu.
Touch "
Eco mode
On / Off
MyMiele " and add
You can now configure "
Lighting
Brightness
entries ("
Add entry ").
(Machine switched on or switched off)
Switch off after
To add entries
Start screen
Main menu
You can select options listed in the
Drinks menu
following categories:
Profiles
– Drinks
MyMiele
– Profiles
Info
Number of drinks
– Maintenance
No. of uses until descaling / degreasing the brew unit.
ĺ
Add entry ".
Touch "
System lock
On / Off
When the system lock is activated, the "
Water hardness
Soft, Medium, Hard, Very hard
If you have already added some entries,
Display brightness
Set
you can carry out the following under
Volume
Buzzer tones
Process ":
"
Keypad tones
– sort or
Showroom programme
Demo mode (On / Off)
Only for demonstration purposes in showrooms or exhibitions. Do not activate this setting for domestic
– delete entries.
use!
Plate warmer
Automatic / On / Off
Spout adjustment
On / Off
The height of the central spout cannot be adjusted manually.
Factory default
Settings
Please note that the following settings will not be reset: Language, Time, Number of drinks dispensed,
User profiles
MyMiele
Plumbed water supply
On / Off
(Only applies to CVA 6805)
Quick Start Guide
Built-in coffee machine
Language " option by following the
Switch on at " and " Switch off at ", the timer must be activated and at least one day of the week
Switch on at " option for the timer cannot be selected.
This Quick start guide does not replace the Operating and installation instructions. It
is essential to read the Operating and installation instructions to familiarise yourself
with how to use the coffee machine before using it for the first time. Please pay
particular attention to the Warning and Safety instructions.
en - GB
M.-Nr. 09 856 991
Advertisement
Related Manuals for Miele CVA 6800
Summary of Contents for Miele CVA 6800
- Page 1 If you have already created a drink, the the brew unit has been degreased. cancelled once it has started. The You need one sachet of the Miele cleaning profile. The name of the current profile is shown in – Brew temperature...
- Page 2 – Service panel ĺ Touch the letters or characters you want. ĺ Touch " Save ". All other removable components of the coffee machine are dishwasher safe. M.-Nr. 09 856 991 / 00 CVA 6800, CVA 6805 en – GB 2014...