Back-Panel Features And Indicators - Dell PowerEdge R630 Owner's Manual
Hide thumbs
Also See for PowerEdge R630:
- Owner's manual (207 pages) ,
- Technical manual (59 pages) ,
- Installing manual (18 pages)
Table of Contents
Advertisement
Power indicator pattern
Blinks three times rapidly and then turns off
Blinks continuously when the mobile device
touches the antenna
Blinks rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Off
Back-panel features and indicators
Figure 8. Back-panel features and indicators—8 hard-drive system (2 PCIe expansion cards)
Table 11. Back-panel features and indicators—8 hard-drive system (2 PCIe expansion cards)
Item
Indicator, Button, or
Connector
1
System identification
button
20
Condition
Indicates that the Quick Sync feature is disabled from
iDRAC.
Indicates data transfer activity.
Indicates that the Quick Sync hardware is not
responding properly. Reseat the bezel. If the problem
persists, see
Indicates that the Quick Sync feature is turned off.
Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it
indicates that power is not delivered to the Quick
Sync bezel.
NOTE: For security purposes, Quick Sync turns
off after thirty seconds of inactivity after the
activation button is pressed. Once timed-out,
the user is expected to press the activation
button again to activate Quick Sync.
Icon
Description
The identification buttons on the front and back
panels can be used to locate a particular system
within a rack. When one of these buttons is
pressed, the LCD panel on the front and the
system status indicator on the back blink until one
of the buttons is pressed again.
Getting
help.
Advertisement
Table of Contents
Troubleshooting
