Dx Flapper Drive Mechanism; Torque Transmission Route From The Asf Motor To The Dx Flapper - Brother DCP6690CW Service Manual
Hide thumbs
Also See for DCP6690CW:
- Network user's manual (175 pages) ,
- User manual (137 pages) ,
- Quick setup manual (43 pages)
Table of Contents
Advertisement
DX flapper drive mechanism
The rotational torque of the ASF motor is transmitted to the cap lift cam gear in the
maintenance unit. As shown below, the rotational torque is further transmitted via the link gear
holder DX ASSY and the link gear holder LT DX ASSY to the DX gear 25/18 mounted at the
right end of the duplex unit.
The rotational torque of the DX gear 25/18 is transmitted via the DX gear 18 and the DX cam
shaft gear to the DX cam shaft that rotates the DX cam. Engaged with the inner profile of the
DX cam, the DX flapper drive lever pivots the DX flapper up (horizontal position) and down
(backward-tilted position).
DX flapper drive lever
DX cam
(Paper ejection roller
SB gear)
(Paper ejection
roller shaft)
(SB gear A)
(SB clutch lever)
(SB gear C)
(SB gear B)
< Torque transmission route from the ASF motor to the DX flapper>
ASF motor
DX gear 25/18
DX flapper drive lever
Cap lift cam gear
Link gear holder DX ASSY
DX cam shaft
DX cam switch
Cap lift cam gear
Link gear holder DX ASSY
DX gear 18
DX cam shaft gear
DX flapper
ASF motor
DX flapper
Duplex unit
Link gear holder LT DX ASSY
DX cam shaft
3-47
Maintenance unit
DX cam shaft gear
Planet gear in the link
gear holder LT DX ASSY
DX gear 25/18
DX gear 18
(3_Duplex_2)
DX cam (inner profile)
Confidential
Advertisement
Table of Contents
Troubleshooting
