Canon PRO-100S series Online Manual page 487
Hide thumbs
Also See for PRO-100S series:
- Manual (2 pages) ,
- Online manual (502 pages) ,
- Getting started (4 pages)
Table of Contents
Advertisement
1. Open the printer driver setup window.
How to Open the Printer Driver Setup Window
2. On the Main sheet, select Manual for Color/Intensity, and then click Set....
3. Drag the Intensity slide bar on the Color Adjustment sheet to adjust the intensity.
Is printing performed beyond the recommended printing area?
Check6
If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.
Resize your original document in your application software.
Printing Area
Is the paper feed roller dirty?
Check7
Clean the paper feed roller.
Cleaning the Paper Feed Roller
Note
• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Is the inside of the printer dirty?
Check8
When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to
become smudged.
Perform the Bottom Plate Cleaning to clean the inside of the printer.
Cleaning the Inside of the Printer (Bottom Plate Cleaning)
Note
• To prevent the inside of the printer from stains, set the paper size correctly.
Set the time to dry the printed surface longer.
Check9
Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.
1. Make sure that the printer is turned on.
2. Open the printer driver setup window.
How to Open the Printer Driver Setup Window
3. Click the Maintenance tab and then Custom Settings.
4. Drag the Ink Drying Wait Time slide bar to set the wait time, and then click OK.
5. Confirm the message and click OK.
487
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
