Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor. Shipping contents The product package should include the following items: · Information flyer · ThinkVision T2254pC Flat Panel Monitor · Power Cord · Analog Signal Cable · Base · Stand Note: To attach a VESA mount, please see “Wall Mounting (Optional)”...
Notice for use To set up your monitor, please see the illustrations below. Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure. 1. Place your monitor with the screen face down on a soft flat surface. 2.
Product overview This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot. Types of adjustments Tilt Please see the illustration below for an example of the tilt range. Swivel With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable viewing angle.
Height Adjustment Hold the monitor pull up on both sides, adjust the reasonable height of the monitor. 110mm Monitor Pivot - Adjust height to the top position before rotation the monitor. - Rotate clockwise until the monitor stops at 90° User controls Your monitor has controls on the front which are used to adjust the display.
Cable lock slot Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower left corner). Please follow the instructions that came with the cable lock to attach it. Setting up your monitor This section provides information to help you set up your monitor.
Page 10
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the other end to the DP connector on the monitor. Lenovo recommends that customers who require to use the Display Port input on their monitor purchase the "Lenovo Display Port to Display Port cable 0A36537".
Page 11
5. Plug the monitor power cord and the computer cord into grounded electrical outlets. Note: A certified power supply cord has to be used with this equipment. The relevant national installation and/or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm or H05VVH2-F2 3G 0.75mm...
Page 12
6. Rotate the head of the monitor into portrait view, push the main clip, and take it down. 7. Open the main clip and place the cables through the main clip, fasten it from right-left. T2254pC Flat Panel Monitor User’s Guide...
Page 13
8. Power on the monitor and the computer. 9. Install the monitor driver, download the driver of the corresponding monitor model from the Lenovo Website: http://support.lenovo.com/us/en/documents/T2254pC, and then click on the driver and install it following the on-screen instructions. 10. To optimize your monitor image, if using the analog cable, press the Automatic Image Setup key.
Please take a few moments to register ® your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you.
· Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture. · General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows. The following are some other tips for comfortable viewing of your monitor: ·...
Accessibility information Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at: https://lenovo.ssbbartgroup.com/lenovo/request_vpat.php...
Using the On-Screen Display (OSD) controls The settings adjustable with the user controls are viewed through the On-Screen Display (OSD), as shown below. To use the controls: 1. Press to open the main OSD menu. 2. Use to move among the icons. Select an icon and press to access the selected function.
Page 19
Table 2-2. OSD functions OSD Icon Sub menu Description Controls and on Main Adjustments Menu Brightness Adjusts overall screen brightness. All input ports Contrast Adjusts difference between light and dark areas. Enable dynamic contrast ratio. Analog Horizontal Position Moves image left or right. (VGA) only Vertical Position Moves image up or down.
Page 20
Table 2-2. OSD functions Controls and OSD Icon Sub menu Description Adjustments on Main Menu Menu Position Adjusts menu location on the screen. All input Default ports The menu position to the default settings. Custom • Horizontal: Changes the horizontal position of the OSD. •...
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
Image rotation Before rotating the monitor, you should set-up your computer to rotate the image. Rotating the image may require special rotation software or you may find that your computer is preloaded with video graphic drivers that allows image rotation. Check the Graphic Properties setting on your computer to see if this feature is available.
For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator State Power Indicator Screen Restoring Operation Compliance Steady green Normal Standby/Suspend Steady amber...
Detaching the monitor base and stand step 1: Place the monitor on a soft and flat surface. step 2: Remove the base and stand from the monitor. Wall Mounting (Optional) Refer to the instructions that come with the VESA compatible base mounting kit. 1.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshootingg Problem...
One or more This is a characteristic If there are more than five pixels Appendix A, "Service of the pixels of the LCD technology missing, contact the Lenovo and Support," on page appear and is not an LCD Support Center. discolored defect.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1680 x 1050 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1680 x 1050 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Page 31
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1680 x 1050 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Page 32
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1680 x 1050 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Getting further help If you still can’t solve your problem, please contact the Lenovo Support Center. For more information on contacting the Customer Support Center, please see Appendix A, “Service and Support,” on page A-1. Service information Product numbers The product number for your monitor is located on the back of the display bezel as shown below.
Service parts The following parts are for use by Lenovo service, or Lenovo authorized dealers, to support the customer warranty. Parts are for service use only. The table below shows information for model 60CC-MAR2-WW. Table 3-3. List of service parts...
Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.
Page 36
Country or Region Telephone Number Argentina 0800-666-0011 (Spanish,English) Australia 1-800-041-267 (English) Austria 0810-100-654 (For local rate) (German) Belgium Warranty service and support: 02-339-36-11 (Dutch,French) Bolivia 0800-10-0189 (Spanish) Brazil Calls made from within the Sao Paulo region : 11-3889-8986, Calls made from outside the Sao Paulo region : 0800-701-4815 (Portuguese) Brunei Darussalam Dial 800-1111 (English)
Page 37
Warranty service and support: +358-800-1-4260 (Finnish) France Warranty service and support: 0810-631-213 (hardware) (French) Germany Warranty service and support : 0800-500-4618 (toll-free) (German) Greece Lenovo Business Partner (Greek) Guatemala Dial 999-9190, wait for operator, and request to reach 877-404-9661 (Spanish) Honduras Dial 800-0123 (Spanish)
Page 38
020-513-3939 (Dutch) New Zealand 0508-770-506 (English) Nicaragua 001-800-220-2282 (Spanish) Norway 8152-1550 (Norwegian) Panama Lenovo Customer Support Center : 001-866-434 (toll-free) (Spanish) Peru 0-800-50-866 OPCION 2 (Spanish) Philippines 1-800-8908-6454 (GLOBE subscribers), 1-800-1441-0719 (PLDT subscribers) (Tagalog, English) Poland Laptops and tablets with brand logosThink : 48-22-273-9777...
Page 39
Country or Region Telephone Number Romania 4-021-224-4015 (Romanian) Russia +7-499-705-6204 +7-495-240-8558 (Standard Charges Apply) (Russian) Singapore 1-800-415-5529 6818-5315 (Standard Charges Apply) (English, Mandarin, Bahasa Malaysia) Slovakia ThinkStation and ThinkServer : 421-2-4954-5555 Slovenia 386-1-2005-60 (Slovenian) Spain 34-917-147-833 (Spanish) Sri Lanka 9477-7357-123 (Sumathi Information systems) (English) Sweden Warranty service and support: 077-117-1040 (Swedish) Switzerland...
The result obtained in other operating environments may vary. Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmelik (EEE)” direktiflerine uygundur. EEE Yönetmeliğine Uygundur. Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other countries, or both. Ukraine RoHS Цим підтверджуємо, що продукція Леново відповідає вимогам...