Dell Vostro 3560 Owner's Manual page 25
Hide thumbs
Also See for Vostro 3560:
- Service manual (113 pages) ,
- Owner's manual (71 pages) ,
- Setup and specifications (25 pages)
Table of Contents
Advertisement
Error messages
GATE A20 FAILURE
GENERAL FAILURE
HARD-DISK DRIVE CONFIGURATION ERROR
HARD-DISK DRIVE CONTROLLER FAILURE 0
HARD-DISK DRIVE FAILURE
HARD-DISK DRIVE READ FAILURE
INSERT BOOTABLE MEDIA
INVALID CONFIGURATION INFORMATION-
PLEASE RUN SYSTEM SETUP PROGRAM
Description
A memory module may be loose. Reinstall the
memory module or, if necessary, replace it.
The operating system is unable to carry out the
command. The message is usually followed by
specific information. For example, Printer out
of paper. Take the appropriate action.
The computer cannot identify the drive type. Shut
down the computer, remove the hard drive, and
boot the computer from an optical drive. Then,
shut down the computer, reinstall the hard drive,
and restart the computer. Run the Hard Disk Drive
tests in Dell Diagnostics.
The hard drive does not respond to commands
from the computer. Shut down the computer,
remove the hard drive, and boot the computer
from an optical drive. Then, shut down the
computer, reinstall the hard drive, and restart the
computer. If the problem persists, try another
drive. Run the Hard Disk Drive tests in Dell
Diagnostics.
The hard drive does not respond to commands
from the computer. Shut down the computer,
remove the hard drive, and boot the computer
from an optical drive. Then, shut down the
computer, reinstall the hard drive, and restart the
computer. If the problem persists, try another
drive. Run the Hard Disk Drive tests in Dell
Diagnostics.
The hard drive may be defective. Shut down the
computer, remove the hard drive, and boot the
computer from an optical. Then, shut down the
computer, reinstall the hard drive, and restart the
computer. If the problem persists, try another
drive. Run the Hard Disk Drive tests in Dell
Diagnostics.
The operating system is trying to boot to non-
bootable media, such as an optical drive. Insert
bootable media.
The system configuration information does not
match the hardware configuration. The message is
most likely to occur after a memory module is
installed. Correct the appropriate options in the
system setup program.
25
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
