Brother GT-3 Series Instruction Manual
Hide thumbs
Also See for GT-3 Series:
- Service manual (375 pages) ,
- Basic operation manual (91 pages) ,
- Instruction manual (18 pages)
Related Manuals for Brother GT-3 Series
Summary of Contents for Brother GT-3 Series
- Page 1 GT-3 Series GARMENT PRINTER For Macintosh Instruction Manual Please be sure to read this manual before using this product. Keep this manual in a safe place for the future use.
-
Page 2: Table Of Contents
2-1. Installing printer driver onto your PC ............................2-1 2-2. Connecting the printer to your PC via a USB 2.0 cable ......................2-2 2-3. Connecting the printer to your PC via a LAN cable ........................ 2-4 3. Print data transmission by means of Brother GT-3 FileOutput... -
Page 3: Before Using Your Printer For The First Time
The names of operating systems described in the main context of this manual are abbreviated. Product names used in this manual are, in general, trademarks or registered trademarks of their respective developer or manufacture. However, in this manual, the ® marks or TM marks are not used. Brother logo is registered trademark of Brother Industries, Ltd. ® ®... -
Page 4: Operating Environment
Before Using Your Printer for the First Time 1-2. Operating environment Compatible OS Mac OS X 10.11 El Capitan Interface USB 2.0, LAN (10 BASE-T and 100 BASE-TX), USB flash memory (Please use a FAT32-formatted USB flash memory of which storage capacity is 32 GB or less.) Min. -
Page 5: Connection Of Printer With Macintosh Pc (Apple Computer)
PC via a LAN cable >>P.2-4". 2-1. Installing printer driver onto your PC To begin with, onto your PC, install the printer driver for file output, Brother GT-3 FileOutput. At this stage, do not connect the printer to your PC yet. -
Page 6: Connecting The Printer To Your Pc Via A Usb 2.0 Cable
With the printer powered on, make a connection of USB 2.0 cable between the printer and your PC. From the Apple menu, open the [System Preferences] and click on the [Printers & Scanners]. After that, click the + button in the lower-left corner. Select the [Brother GT-3xx] first, then click on the [Select Software…] of [Use]. - Page 7 Connection of printer with Macintosh PC (Apple Computer) Select the [Brother GT-3] and click on the [OK]. Then, click [Add]. In the [Default printer], select either [Brother GT-3xx] or [Brother GT-3 FileOutput]. This exits the setting for the USB connection.
-
Page 8: Connecting The Printer To Your Pc Via A Lan Cable
Connection of printer with Macintosh PC (Apple Computer) 2-3. Connecting the printer to your PC via a LAN cable When you connect your PC to the printer via a LAN cable, make IP address setting for the printer from Windows PC by reference to Instruction Manual. - Page 9 Select the [Line Printer Daemon - LPD] of [Protocol]. In the [Queue], type in the word "BINARY_P1". Enter the name of the printer in the [Name]. Click on the [Select Software…] of [Use]. Select the [Brother GT-3] and click on the [OK]. Then, click [Add].
- Page 10 Connection of printer with Macintosh PC (Apple Computer) Then, the current window goes back to the [Printers & Scanners] window into which the GT-3 printer (LAN) is added. In the [Default printer], select your desired GT-3 printer, as required. This exits the setting for the LAN connection.
- Page 11 <TIPS> The procedures to output a file from the [Brother GT-3 FileOutput] are the same as those for Windows PC. For details, refer to the Instruction Manual. Transmission of print data Send such print data that has been saved using the [Brother GT-3 FileOutput] printer to the printer by performing the procedures mentioned below.
- Page 12 *Please note that the contents of this manual may differ slightly from the actual product purchased as a result of product improvements. http://www.brother.com/ 1-5, Kitajizoyama, Noda -cho, Kariya 448-0803, Japan. GT-3 Series © 2016 Brother Industries, Ltd. All Rights Reserved. I6031094F E This is the original instructions. 2016.03.F(1)