Table of Contents
Advertisement
• 806f0323-2101ffff : Power cycle of system [ComputerSystemElementName] initiated by watchdog
[WatchdogElementName]. (Watchdog)
This message is for the use case when an implementation has detected a Power Cycle by Watchdog
occurred.
May also be shown as 806f03232101ffff or 0x806f03232101ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0374
User Response
No action; information only.
•
806f040c-2001ffff : [PhysicalMemoryElementName] Disabled on Subsystem
[MemoryElementName]. (DIMM 1)
This message is for the use case when an implementation has detected that Memory has been Disabled.
May also be shown as 806f040c2001ffff or 0x806f040c2001ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0131
User Response
1. Make sure the DIMM is installed correctly.
Appendix A. Integrated Management Module II (IMM2) error messages
325
Advertisement
Table of Contents
Troubleshooting
