Cisco Nexus 9000 Series Configuration Manual page 54
Nx-os vxlan
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (562 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Verifying the VXLAN Configuration
Command
show nve interface
show nve peers
show nve peers peer_IP_address interface
interface_ID counters
clear nve peers peer_IP_address interface
interface_ID counters
clear nve peer-ip peer-ip-address
show nve vni
show nve vni ingress-replication
show nve vni vni_number counters
clear nve vni vni_number counters
show nve vxlan-params
show mac address-table static interface nve 1
show vxlan interface
show vxlan interface | count
Table 4: Display VXLAN configuration information (Release 7.0(3)I2(2) and later)
Command
show run track
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 7.x
42
Purpose
Displays NVE overlay interface status.
Displays NVE peer status.
Displays per NVE peer statistics.
Clears per NVE peer statistics.
Clears stale NVE peers.
Stale NVE peers are peers that do not have MAC
addresses learnt behind them.
Displays VXLAN VNI status.
Displays the mapping of VNI to ingress-replication
peer list and uptime for each peer.
Displays per VNI statistics.
Clears per VNI statistics.
Displays VXLAN parameters, such as VXLAN
destination or UDP port.
Displays static MAC information.
Displays VXLAN interface status.
Displays VXLAN VLAN logical port VP count.
Note
A VP is allocated on a per-port per-VLAN
basis. The sum of all VPs across all
VXLAN-enabled Layer 2 ports gives the
total logical port VP count. For example, if
there are 10 Layer 2 trunk interfaces, each
with 10 VXLAN VLANs, then the total
VXLAN VLAN logical port VP count is
10*10 = 100.
Purpose
Displays tracking information for running-config.
Configuring VXLAN
- Quick Links:
- Configuring Vxlan
- Configuring Q-In-Vni
Hide quick links:
Advertisement
Table of Contents
