Page 1 Features and Specifications Manual Issue 5.0 December 2010...
Page 3: Table Of Contents
TABLE OF CONTENTS ___________________________________________________________________________________ Section 1 About This Chapter ..................1-1 Section 2 Important Notes .................... 1-2 Account Code – Forced/Verified/Unverified ........... 1-3 Account Code Entry ................1-11 Alarm ....................1-17 Alarm Reports ..................1-21 Alphanumeric Display ................1-33 Analog Communications Interface (ACI) ..........1-35 Ancillary Device Connection ..............
Page 4 Issue 5.0 UNIVERGE SV8100 ___________________________________________________________________________________ Call Monitoring ................... 1-183 Call Redirect ..................1-189 Call Waiting/Camp-On ............... 1-193 Callback ..................... 1-199 Caller ID Call Return ................1-205 Caller ID ..................... 1-207 Caller ID – Flexible Ringing ..............1-223 Central Office Calls, Answering ............1-231 Central Office Calls, Placing ..............
Page 5 UNIVERGE SV8100 Issue 5.0 ___________________________________________________________________________________ Direct Inward Line (DIL) ..............1-403 Direct Inward System Access (DISA) ..........1-409 Direct Station Selection (DSS) Console ..........1-427 Directed Call Pickup ................1-439 Directory Dialing ................. 1-443 Distinctive Ringing, Tones and Flash Patterns ........1-447 Do Not Disturb ..................
Page 6 Issue 5.0 UNIVERGE SV8100 ___________________________________________________________________________________ Intercom ..................... 1-603 ISDN Compatibility ................1-611 Last Number Redial ................1-633 Line Preference .................. 1-637 Long Conversation Cutoff ..............1-643 Loop Keys ..................1-647 Meet Me Conference ................1-653 Meet Me Paging ................. 1-657 Meet Me Paging Transfer ..............
Page 7 UNIVERGE SV8100 Issue 5.0 ___________________________________________________________________________________ Q-Sig ....................1-811 Redial Function .................. 1-823 Repeat Redial ..................1-827 Reverse Voice Over ................1-831 Ring Groups ..................1-835 Ringdown Extension (Hotline), Internal/External ........ 1-841 Room Monitor ..................1-845 Save Number Dialed ................1-851 Secretary Call (Buzzer) ..............
Page 8 Issue 5.0 UNIVERGE SV8100 ___________________________________________________________________________________ Tone Override ..................1-993 Traffic Reports ..................1-997 Transfer .................... 1-1001 Trunk Group Routing ................ 1-1015 Trunk Groups ................... 1-1021 Trunk Port Disable ................1-1027 Trunk Queuing/Camp-On ..............1-1029 Unicast/Multicast Paging Mode ............1-1033 Uniform Call Distribution (UCD) ............1-1041 Uniform Numbering Network ............
Page 9 LIST OF TABLES ___________________________________________________________________________________ Table 1-1 Sample Alarm Report ..................1-22 Table 1-2 Alarm Report Definitions ................. 1-23 Table 1-3 Alarm Report Item Definitions ................. 1-23 Table 1-4 Sample System Information Printout ............... 1-24 Table 1-5 Keys for Entering Names ................1-218 Table 1-6 Caller ID Matching Rule ................
Page 10 Issue 5.0 UNIVERGE SV8100 ___________________________________________________________________________________ Table 1-25 Board Power Factor ..................1-1069 Table 1-26 Terminal Power Factor ................1-1070 Table 1-27 Maximum Number of Package Installed ............. 1-1070 Table 1-28 Voice Prompting Messages ................ 1-1121 Table 1-29 Default Incoming Ringing Tone ..............1-1142 Table 1-30 Error Messages and Causes ...............
Page 11: About This Chapter
HAPTER ECTION This chapter provides an alphabetical listing of the features that are available with the UNIVERGE SV8100 system. Each feature provides the following information: Description – briefly describes the feature and how it is use. Conditions – provides special operating conditions (if any) that need to be considered with using the feature.
Page 12: Important Notes
Issue 5.0 UNIVERGE SV8100 MPORTANT OTES ECTION Simplifying Multiline Terminal Operation with One-Touch Keys A multiline terminal user can access many features Service Codes (e.g., Service Code 844 sets Call Forward Busy/No Answer). To streamline the operation of their telephone, a multiline terminal user can store these codes under One-Touch Keys.
Page 13: Account Code - Forced/Verified/Unverified
Account Code – Forced/Verified/Unverified Description Account Codes are user-dialed codes that help the system administrator categorize and/or restrict trunk calls. The system has two types of Forced Account Codes: Forced Account Codes (Unverified) Forced Account Codes require an extension user to enter an Account Code every time they place a trunk call.
Page 14 Issue 5.0 UNIVERGE SV8100 memory. For example, the entry 123@ lets users dial Verified Account Codes from 1230 through 1239. Operator Notification To prevent Account Code abuse, the system can notify the operator each time an Account Code violation occurs (Program: 20-13-20). This can happen if the user fails to enter an Account Code (if Forced) or enters a Verified Account Code that is not in the list.
Page 15 UNIVERGE SV8100 Issue 5.0 Conditions If a user enters a code that exceeds the 16 digit limit, the system ignores the Account Code Entry. If the system has Account Codes disabled, the digits dialed (e.g., 1234 ) appear on the SMDR report as part of the number dialed.
Page 16 Issue 5.0 UNIVERGE SV8100 Related Features Automatic Route Selection PBX Compatibility Speed Dial – System/Group/Station Station Message Detail Recording Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-11 Basic Trunk Data Setup – Enable (1) or disable (0) Account...
Page 17 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 35-05-01 Account Code Setup – Account For each Class of Service (1~15) 0 = Account Codes Code Mode use this option to select the disabled. (Codes Account Code Mode.
Page 18 Issue 5.0 UNIVERGE SV8100 Operation To enter an Account Code any time while on a trunk call: The outside caller cannot hear the Account Code digits you enter. You can use this procedure if your system has Optional Account Codes enabled. You may also be able to use this procedure for incoming calls.
Page 19 UNIVERGE SV8100 Issue 5.0 Dial the number you want to call. To dial an outside number and let your system tell you when a Forced Account Code is required: Access a trunk and dial the number you want to call.
Page 20 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 10 Account Code – Forced/Verified/Unverified...
Page 21: Account Code Entry
UNIVERGE SV8100 Issue 5.0 Account Code Entry Description Account Codes are user-dialed codes that help the system administrator categorize and/or restrict trunk calls. Optional Account Codes allow a user to enter an Account Code while placing a trunk call or anytime while on a call.
Page 22 Issue 5.0 UNIVERGE SV8100 Account Codes appear on the SMDR report (even if they are hidden on the telephone display). To simplify Account Code Entry, store the Account Code (e.g., 1234) in a One-Touch Key. Press the key instead of dialing the codes.
Page 23 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-11 Basic Trunk Data Setup – Enable (1) or disable (0) Account 0= Disable Account Code Required Codes for each trunk. 1= Enable (default = 1)
Page 24 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 35-05-04 Account Code Setup – Hiding For each Class of Service (1~15), 0 = Display Account Account Codes enter 1 to have the system hide Codes Account Codes on an extension 1 = Hide Account display as they are entered.
Page 25 UNIVERGE SV8100 Issue 5.0 If your system has Verified Account Codes enabled, be sure to choose a code programmed into your Verified Account Code list. Access trunk for outside call. You can press a line key or dial a code (except 9) to access a trunk. Refer to...
Page 26 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 16 Account Code Entry...
Page 27: Alarm
UNIVERGE SV8100 Issue 5.0 Alarm Description Alarm lets any station extension work like an Alarm clock. An extension user can have Alarm remind them of a meeting or an appointment. There are two types of Alarms: Alarm 1 (sounds only once at the preset time)
Page 28 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-01-06 System Options – Alarm Set the duration of the Alarm 0~64800 seconds Duration signal. (default = 30 seconds) Operation To set the alarm: At the multiline terminal, press Speaker.
Page 29 UNIVERGE SV8100 Issue 5.0 To silence an alarm: At multiline terminal, press Exit. - OR - At the single line telephone, lift the handset. The single line set user hears Music on Hold when the handset is lifted. To check the programmed alarm time at a multiline terminal: Press Help.
Page 30 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 20 Alarm...
Page 31: Alarm Reports
Alarm Reports Description The UNIVERGE SV8100 system logs various errors and reports information about the operation that can be used to determine the cause of a problem. The system can indicate several errors on the multiline telephone display, output to a USB stick on the CD-CP00, or be downloaded in PCPro. The report data can also be sent via e-mail.
Page 32: Table 1-1 Sample Alarm Report
Issue 5.0 UNIVERGE SV8100 Table 1-1 Sample Alarm Report << Alarm Report 05/16/2006 14:30 PAGE 001 STAT DATE TIME ITEM UNIT PARAMETER 0002 05/16/06 14:21 PKG Installation 0010 05/16/06 14:21 ISDN Link 0010 05/16/06 14:21 ISDN Link 0002 05/16/06 14:33...
Page 33: Table 1-2 Alarm Report Definitions
UNIVERGE SV8100 Issue 5.0 Table 1-2 Alarm Report Definitions Alarm Report Heading Definitions Alarm Type (MAJ = Major, MIN = Minor) Number of Alarm (4-digit) STAT Status (REC = Recovered, ERR = Error, WAR = Warning DATE Date the Alarm Occurred...
Page 34: Table 1-4 Sample System Information Printout
Issue 5.0 UNIVERGE SV8100 The System Information Reports indicate: Date and Time of the Report Blade names Slot condition (working, blocked) Port assignment Port classification Table 1-4 Sample System Information Printout System Information 05/18/2006 11:02 slot location type assign port...
Page 35 Conditions Alarm Reports and System Information Reports can be output to a USB stick on the CD-CP00. The UNIVERGE SV8100 supports the following Alarms to be output to the LCD of a multiline terminal: SMDR Buffer Full CD-CP00-LAN link Error...
Page 36 Issue 5.0 UNIVERGE SV8100 deleted to allow the new record to be saved. If the System is set up to E-mail the Alarm Reports and the Mail Server is down, the report is not sent. System Information Reports cannot be set for output via E-mail.
Page 37 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Setting Up Alarms: Program Program Name Description/Comments Assigned Data Number 90-10-01 System Alarm Setup – Alarm Set the alarm type 14 and 60. 0 = Not Set Type Alarm 14 – CD-CP00-LAN Link...
Page 38: Printing Reports
Issue 5.0 UNIVERGE SV8100 Printing Reports: Program Program Name Description/Comments Assigned Data Number 90-12-01 System Alarm Output – Output Indicate the type of connection 0 = No Setting Port Type used for the System Alarms. The 1~3 = Reserved baud rate for the COM port should 5 = USB Memory be set in Program 10-21-02.
Page 39 UNIVERGE SV8100 Issue 5.0 E-mailing Alarm Reports: Program Program Name Description/Comments Assigned Data Number 10-12-01 CD-CP00 Network Setup – IP Assign the IP Address. 0.0.0.0 ~ Address 126.255.255.254 128.0.0.1 ~ 191.254.255.254 192.0.0.1 ~ 223.255.255.254 (default = 192.168.0.10) 10-12-02 CD-CP00 Network Setup –...
Page 40 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 90-11-02 System Alarm Report – Report When Alarm Reports are to be 0 = No Report Method e-mailed, set this option to 1. This 1 = E-mail Address program has higher priority than (default = 0) Program 90-12-06.
Page 41 UNIVERGE SV8100 Issue 5.0 Operation To use this feature at any terminal: The user must be logged in with an Installer (IN) level password as defined in Program 90-02. Alarm Reports 1 - 31...
Page 42 Issue 5.0 UNIVERGE SV8100 1 - 32 Alarm Reports...
Page 43: Alphanumeric Display
UNIVERGE SV8100 Issue 5.0 Alphanumeric Display Description Multibutton display telephones have a 3-line, 24 character per line Alphanumeric Display that provides various feature status messages. These messages help the display telephone user process calls, identify callers and customize features. Conditions The contrast is not adjustable when the telephone has background music enabled.
Page 44 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-13 Service Code Setup (for Setup/ If needed, redefine the service Entry Operation) – Display code used to select the language (default = 778) Language Selection for Multiline for display multiline terminals.
Page 45: Analog Communications Interface (Aci)
The PGD(2)-U10 ADP relay associated with the port closes when the call goes through. For Music on Hold, connect the music source to the PGD(2)-U10 ADP module. Connect the music source control leads to the CTL (control relay) jack. Refer to the UNIVERGE SV8100 System Hardware Manual for additional details.
Page 46 Issue 5.0 UNIVERGE SV8100 Auxiliary Device Control The PGD(2)-U10 ADP can control a customer-provided tape recorder. When an extension user dials the ACI analog port extension number, they can automatically start the recorder and activate the record function. When the user hangs up, the recording stops and the tape recorder turns off. For tape recording, connect the tape recorder AUX input jack to the PGD(2)-U10 ADP jack.
Page 47 Department Group options to PGD(2)-U10 ADP software ports, not physical ports. During installation, you connect equipment to the jacks on the PGD(2)-U10 ADP that correspond to the software port. Refer to the UNIVERGE SV8100 System Hardware Manual for installation details. Conditions ACD agents who are logged on can be recorded.
Page 48 Issue 5.0 UNIVERGE SV8100 PGD(2)-U10 ADP /ACI Interface Specifications Maximum Input 0.4Vrms or 1.0Vp-p. Audio/Paging Output Output Impedance 600 Ohms @ 1 K Hz Maximum Output + 3 dBm Default Settings No PGD(2)-U10 ADPs programmed. System Availability Terminals None Required Component(s)
Page 49 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (DLCA PKG Setup) – Assigns or displays the current 0 = Not set Terminal Type (B1) terminal type assigned to B 1 = Multiline Terminal...
Page 50 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys If required, program and ACI Line Key 1~48 Conversation Record Key (code 0~99 (Normal Function 69 + 0). This key allows an Code 851 by default)
Page 51 UNIVERGE SV8100 Issue 5.0 Dial ACI software port extension number. - OR - Dial ACI Department Group extension number. - OR - Press the One-Touch Key for ACI extension or Department Group. After you call an ACI software port: If the port is set for input (Program 33-01-01=1) and a music source is connected, you hear music.
Page 52 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 42 Analog Communications Interface (ACI)
Page 53: Ancillary Device Connection
Ancillary Device Connection allows installation of selected peripheral (ancillary) devices to a multiline terminal. This feature enhances peripheral device objectives. An UNIVERGE SV8100 multiline terminal user can accomplish this by using the AP(R)-R/APR-L Unit (Analog Port Adapter with Ringer) or AP(A)-R Unit (Analog Port Adapter without Ringer) for analog telephone devices, or installing the AD(A)-R/APA-L Unit to connect devices such as tape recorders.
Page 54 Issue 5.0 UNIVERGE SV8100 When Program 10-03-06 is assigned as APR you cannot manually assign a port number for the APR. Phones that have an APR/APA installed do not pass voice to a trunk until the interdigit time expires (Program 21-01-03).
Page 55 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-03 ETU Setup (LCA PKG Setup) – Customize the transmit and 1~63 (-15.5 +15.5dB) Transmit Gain Level (S-Level) receive levels of the CODEC Gain [default = 32 (0dB)] Types for 500/2500 type single line telephones.
Page 56 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 46 Ancillary Device Connection...
Page 57: Answer Hold
UNIVERGE SV8100 Issue 5.0 Answer Hold Description Answer Hold allows a multiline terminal user to press the flashing Answer Key to answer an incoming ringing call or a Camp-On call. When the multiline terminal user is already answering a call, the first call is automatically placed on hold, depending on the user setting in Program 15-02-06.
Page 58 Issue 5.0 UNIVERGE SV8100 Required Component(s) Not Applicable 1 - 48 Answer Hold...
Page 59 UNIVERGE SV8100 Issue 5.0 Related Features Answer Key Central Office Calls, Answering Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-02-06 Multiline Telephone Basic Data Use this option to set the function 0 = Normal (Common) Setup – Hold Key Operating of the Multiline Hold key.
Page 60 Issue 5.0 UNIVERGE SV8100 To answer a call on a different line key or CAP key with a call in progress: Receive a CO/PBX, DID/DISA/DIL/E&M incoming ring. Answer flashes. Press Answer and answer the new call. The Answer LED goes out. The original call is put on hold.
Page 61: Answer Key
UNIVERGE SV8100 Issue 5.0 Answer Key Description Multiline Terminals have an Answer Key with an LED that flashes when the Multiline Terminal user receives an incoming CO/PBX, Tie/DID transfer, or CO/PBX transfer call. When multiple calls are received, The Answer Key is used to pick up calls and continues flashing until the last unanswered call is answered.
Page 62 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type for Incoming Type for Day/ each trunk. Night Mode (1~8): 0 = Normal 1 = VRS (second dial...
Page 63 UNIVERGE SV8100 Issue 5.0 To answer calls using the Answer Key: Receive CO/PBX incoming ring. Press Answer. Talk with the CO/PBX incoming calling party. When additional CO incoming calls are received, press Answer to place the current call on hold and connect the multiline terminal user to the next call.
Page 64 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 54 Answer Key...
Page 65: Attendant Call Queuing
UNIVERGE SV8100 Issue 5.0 Attendant Call Queuing Description Attendant extensions can have up to 32 incoming calls queued before additional callers hear busy tone. This helps minimize call congestion in systems that use the attendant as the overflow destination for unanswered calls.
Page 66 Issue 5.0 UNIVERGE SV8100 Related Features Call Forwarding Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-01-01 System Numbering – Service Set the system internal (Intercom) Refer to System Code numbering plan. The numbering Numbering Default plan assigns the first and second...
Page 67: Automatic Call Distribution (Acd)
UNIVERGE SV8100 Issue 5.0 Automatic Call Distribution (ACD) Description Automatic Call Distribution (ACD) uniformly distributes calls among agents of a programmed ACD Group. When a call rings into an ACD Group, the system automatically routes the call to the agent that has been idle the longest.
Page 68 Issue 5.0 UNIVERGE SV8100 ACD Overflow (With Announcements) ACD offers extensive overflow options for each ACD Group. For example, a caller ringing in when all agents are unavailable can hear an initial announcement (called the 1st Announcement). This announcement can be a general greeting like, “Thank you for calling. All of our agents are currently busy helping other customers.
Page 69 UNIVERGE SV8100 Issue 5.0 Agent Identity Code (AIC) An Agent Identity Code (AIC) allows ACD agents to log in any extension without setting Program 41-02-01. Using AIC, ACD agents can also log in to multiple ACD groups at the same time (up to 64 ACD Groups).
Page 70 Issue 5.0 UNIVERGE SV8100 Multiple Agent Log In ACD agents can log in any extension with multiple AICs (up to three). Using the example setup above, ACD works as follows: EXAMPLE: Example 1: Log In with AIC 789 and 567 During Mode Pattern 1, ACD agents belong to ACD groups 1, 2, 10 and 16 at the same time.
Page 71 UNIVERGE SV8100 Issue 5.0 Enhanced DSS Operation A programmed extension user can use their DSS Console to monitor the status of the ACD Agents within a group. The DSS Console is an essential tool for supervisors. The console key flash rates tell the supervisor at a glance which of the group agents are: Logged onto the group (i.e., in service).
Page 72 Issue 5.0 UNIVERGE SV8100 Automatic Rest Mode: When an ACD Group has Automatic Rest Mode, the system automatically puts an agent’s telephone in Rest Mode if it is not answered. This ensures callers do not have to wait while ACD rings an extension that is not answered.
Page 73 UNIVERGE SV8100 Issue 5.0 Work Time Work Time temporarily busies-out an ACD agent’s telephone so they can work at their desk uninterrupted. This gives the agent time to fill out important logs and records as soon as they are finished with their call. There are two types of Work Time: Manual Work Time: An ACD Agent can enable Manual Work Time anytime they need to work at their desk undisturbed.
Page 74 Issue 5.0 UNIVERGE SV8100 BLF For ACD Agents (Continued) BLF For Co-Workers That Are Not ACD Agents When the key is . . . Your co-worker is . . . Idle Busy or ringing Fast Flash In Do Not Disturb – All calls (option 3)
Page 75 UNIVERGE SV8100 Issue 5.0 When Logged Out of ACD Group: When ACD agents are logged out and a call is placed into the ACD queue, the telephones of the logged out agents display the Queue Status and they hear the alarm according to the settings defined in system programming.
Page 76 -based software programs designed to enhance the ACD features of the UNIVERGE SV8100 Telephone System. The software displays both real-time data and historical reports. Refer to the UNIVERGE SV8100 ACD MIS Supervisors Manual for more information. ACD Group as Overflow Destination The system can transfer an overflow call to a specific ACD Group, off-site via a speed dial bin, Ring Group or to voice mail using Program 41-09-01.
Page 77 ACD LOGIN status, however an agent may still log in. Conversation Recording is programmed system-wide – it is not ACD feature-specific. Refer to the UNIVERGE SV8100 ACD Manual for additional information. Up to 16 channels (speech paths) are available when using the DSP with VRS installed on the CD-CP00 for messages.
Page 78 Issue 5.0 UNIVERGE SV8100 Program 41-08-03: ACD Overflow Options – Delay Announcement Source Type. The ACI port used for the ACD Delay Announcements program like Music on Hold (MOH) ACI ports. Refer to the MOH Music on Hold on page 1-709.
Page 79 Issue 5.0 MIS: The UNIVERGE SV8100 system does not buffer the ACD Statistics when the PC running the ACD Server application is not connected. If an ACD Queue call is transferred to another logged-in Agent, it shows that both agents took a call but the queue only shows it as one total call.
Page 80 Issue 5.0 UNIVERGE SV8100 Required Software None 1 - 70 Automatic Call Distribution (ACD)
Page 81 UNIVERGE SV8100 Issue 5.0 Related Features Direct Inward Dialing (DID) InMail Music on Hold Night Service Voice Mail Integration (Analog) Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-13-01 Service Code Setup (for ACD) – Assign for multiline terminals and...
Page 82 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-13-12 Service Code Setup (for ACD) – When using service code 669 to Change Agent ACD Group by change an agent ACD group, the (default = 769) Supervisor supervisor must enter a 2-digit number for the group.
Page 83 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (COS) Day Night/Mode: 1~8 to an extension. There are 15 Class of Service of Classes of Service that can be Extensions (1~15) assigned.
Page 84 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 30-05-08 DSS Console Lamp Table – ACD Use this program to define the Lamp Pattern Data: Agent Emergency (ACD DSS) LED patterns for functions on the DSS consoles. [default = 6 (IW)]...
Page 85 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 41-04-02 ACD Group Supervisor – Assign the supervisor operating 0 = Do Not receive any Operation Type type. ACD incoming calls (No) 1 = Receive ACD incoming calls in case...
Page 86 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 41-07-01 ACD Weekly Schedule Setup Assign the four Work Schedules Day No./Time Pattern: (1~4) to days of the week. 1 = Sunday/ 0~4 The assignments made in this (0 = No ACD)
Page 87 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 41-08-02 ACD Overflow Options – ACD Assign the overflow mode (0~9), 0 = No Setting Overflow Destination destination and announcement 1~64 = ACD Group message types. Delay 65 = Overflow Table...
Page 88 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 41-10-02 ACI Delay Announcement – 2nd Use this program to define the ACI 0~96 Delay Announcement ACI Port port number to be used for the 0 = No Setting Number delay announcement.This...
Page 89 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 41-11-06 VRS Delay Announcement – Define what callers hear during 0 = Ring Back Tone Tone Kind at Message Interval the interval between VRS waiting 1 = MOH Tone messages.
Page 90 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 41-14-01 ACD Options – Emergency Call Define if Emergency Calls ring the 0 = Call to system Operation Mode system supervisory extension or supervisory extension not when the group supervisory when group extension is busy.
Page 91 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 41-14-12 ACD Options – Start Headset Ear This option sets the ringing start 0~64800 (seconds) Piece Ringing (for SLT) time for the headset ear piece on a (default = 0 seconds) single line telephone.
Page 92 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 41-15-01 ACD Queue Alarm Information – Define the number of calls that 0~200 Number of Calls in ACD Queue must be in queue before the Alarm 0 = No Alarm to Activate Alarm Information Information is activated.
Page 93 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 41-18-07 ACD Agent Identity Code Setup – For each AIC table, define the 0~64 ACD Group Number in Mode 5 ACD group AIC Agents are in 0 = No Setting during mode 5.
Page 94 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 41-20-01 ACD Queue Display Settings – Program 41-15 can also provide a 0=No Display, 1~200 Number of Calls in Queue queue alarm to the agents. The (default = 0) options in Program 41-20 should not be used if 41-15 is set.
Page 95 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 47-03-01 InMail Group Mailbox Options – Use this option to enable or 0 = Disable (No) disable the Master Mailbox. A Master Mailbox Active 1 = Enable (Yes) Master Mailbox is not accessible (default = 0) when it is disabled.
Page 96 Issue 5.0 UNIVERGE SV8100 AIC Agent Log In To log in: Multiline Terminal Press the ACD LOG IN/LOG OUT key (Program 15-07-01 or SC 852: 10). - OR - Press Speaker and dial the AIC Log In service code (Program 11-13-08).
Page 97 UNIVERGE SV8100 Issue 5.0 Dial the AIC Log Out service code (Program 11-13-08). - OR - To log out of an ACD group without using AIC: Lift the handset. Dial the ACD Log Out service code 755 (Program 11-13-02). Multiple Agent Log In...
Page 98 Issue 5.0 UNIVERGE SV8100 Queue Status Display When Logged Into ACD Group With an idle multiline terminal, press the Queue Status Display Programmable Function Key (Code: 19). The display indicates the number of calls in queue, the trunk name, and the time the call has been waiting.
Page 99 UNIVERGE SV8100 Issue 5.0 To cancel the manual Rest Mode: Multiline Terminal Press the ACD Rest Mode key (Program 15-07-01 or SC 852: 13). The ACD Rest Mode key light goes off. Single Line Telephone Lift the handset. A fast busy is heard.
Page 100 Issue 5.0 UNIVERGE SV8100 1 - 90 Automatic Call Distribution (ACD)
Page 101: Automatic Release
UNIVERGE SV8100 Issue 5.0 Automatic Release Description Automatic Release drops the line circuit when an outside party abandons the call. For this feature to work with Loop Start Trunks, the CO/PBX providing the outside line must provide a timed disconnect signal.
Page 102 Issue 5.0 UNIVERGE SV8100 Related Features Central Office Calls, Answering Central Office Calls, Placing Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-02-09 Analog Trunk Data Setup – Busy This option enables/disables Busy 0 = Disable (No) Tone Detection Tone Detection.
Page 103 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-04-02 Call Progress Tone Detector Use this option to set the minimum 0~15 Setup – Min. Detection Level detection level. detect level 0: –15dBm(0) to –30dBm(15) detect level 1: –30dBm(0) to...
Page 104 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-04-06 Call Progress Tone Detector Use this option to set the minimum 1~255 (30+30- Setup – ON Minimum Time On time. 7680ms) default: Type 1 (DT) – 9 (300ms) Type 2 (BT) –...
Page 105: Automatic Route Selection
The ARS feature can add or delete digits and route calls according to pre-determined levels. When UNIVERGE SV8100 systems are networked together by Tie lines or K-CCIS, the networked systems can be called by a system number and a user extension number, just an extension number, or by using a trunk access code.
Page 106 Issue 5.0 UNIVERGE SV8100 Separate Routing for Selected Call Types To provide unique control, you can program separate routing instructions for: Directory assistance calls Emergency calls Basic ARS Operation When a user places an outside call, ARS analyzes the digits dialed and assigns one of 400 Selection Numbers to the call.
Page 107 UNIVERGE SV8100 Issue 5.0 The examples below use the following system programming: Program 26-02 for Dial Analysis Table for ARS set as: Program 26-02-01 Program 26-02-02 Program 26-02-03 Program 26-02-04 Table No. Dial Service Type Add Data ARS COS 203@@@@@@@...
Page 108 Issue 5.0 UNIVERGE SV8100 Program 26-01-03 for ARS Misdialed Number Handling as: 1 (Warning Tone) With Program 26-01-06: ARS COS Match Access disabled (set to 0): If at 9:00 AM, each extension dialed 9+(203)926-5400 All Extension would use Trunk Group 3...
Page 109 UNIVERGE SV8100 Issue 5.0 With ARS installed, Trunk Queuing automatically queues for the least costly route. The system automatically redials the queued call when the extension user lifts the handset. Speed Dialing may bypass ARS routing. Set up other options for outgoing calls (e.g., unassign line keys, adjust gains, ARS access key, Call Appearance (CAP) Keys, etc.).
Page 110 Issue 5.0 UNIVERGE SV8100 Trunk Queuing/Camp On Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-01-01 System Numbering Set the system internal (Intercom) Refer to SV8100 numbering plan. The numbering Programming Manual plan assigns the first and second...
Page 111 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 12-02-02 Automatic Night Service Define the daily pattern of the 0000~2359 Patterns –End Time Automatic Mode Switching. Each Refer to the SV8100 Mode Group has 10 patterns. Programming Manual These patterns are used in for defaults.
Page 112 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 12-04-01 Holiday Night Service Switching Define a yearly schedule of Days and Months: holiday night-switch settings. This 0101~1231 schedule is used for setting (e.g. 0101 = Jan. 1; special days when the company is 1231 = Dec.
Page 113 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 14-05-01 Trunk Group – Trunk Group Program trunks of the same carrier Trunks 1-200 Number type into the same trunk group. Trunk Group 1-100 Priority - 1-200 (default = All trunks in...
Page 114 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day/Night Mode: 1~8 to an extension. Class of Service for Extensions: 1~15 Defaults: Extension number 101 as Class 15.
Page 115 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 26-01-06 Automatic Route Selection With the ARS Class of Service 0 = Disable (Off) Service – Class of Service Match Match Access feature, you can 1 = Enable (On)
Page 116 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 26-02-02 Dial Analysis Table for ARS – For each Dial Analysis Table 0 = No Service (None) ARS Service Type (1~200), select 0 for no ARS, 1 for 1 = Route to Trunk Service Type 1 –...
Page 117 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 26-03-01 ARS Dial Treatments – Treatment Assign the Dial Treatments (1~15) 24 characters Code for automatic ARS dialing maximum translation. Assign Dial (default not assigned) Treatments to Service Numbers (Trunk Groups) in Program 26-02.
Page 118 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 26-11-01 Transit Network ID Table – Enter the Transit Network 0000~9999 Transmit Network ID (Carrier ID) Selection information element to (Fixed four digits) be added to an ARS call using an (default not assigned) ISDN trunk.
Page 119 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 44-02-04 Dial Analysis Table for ARS/ Determine if the Dial Tone 0 = Off F-Route Access – Dial Tone Simulation is on (1) or off (0) for 1 = On...
Page 120 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 44-05-01 ARS/F-Route Table – Trunk Select the trunk group number to 0~100, 255 Group Number be used for the outgoing ARS call. 0 = No Setting 255 = Extension Call...
Page 121 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 44-05-11 ARS/F-Route – Network For each ARS/F-Route table 0~16 Specified Parameter Table (1~500) assign the priority (1~4). (default = 0) Assign the Network Specified Parameter Table (0~16). 44-06-01 Additional Dial Table...
Page 122 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 44-09-01 Weekly Schedule for ARS/ Define a weekly schedule for 1 = Sunday F-Route using ARS/F-Route day numbers (Pattern 1~10) 1~7 (1 = Sun, 7 = Sat), pattern (default Pattern = 1) numbers (1~10).
Page 123 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-03 DTMF Tone Receiver Setup – Use this option to define the 0~15 detect level 0: Min. Detect Level minimum detection level for DTMF –10dBm(0) to Tone Receiver. –25dBm(15) detect level 1: –15dBm(0) to –...
Page 124 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-04 DTMF Tone Receiver Setup – Use this option to define the 0~15 Max. Detect Level maximum detection level for detect level 0: 0dBm(0) DTMF Tone Receiver. to –15dBm(15) detect level 1: –5dBm(0) to –...
Page 125 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-05 DTMF Tone Receiver Setup – Use this option to define the Forward Twist Level forward twist level for DTMF Tone (1dB ~ 10dB) Receiver. default: Type 1 = 5 (6dBm)
Page 126 Issue 5.0 UNIVERGE SV8100 Operation To place a call using ARS: At the multiline terminal, press Speaker. - OR - At the single line telephone, lift the handset. You hear normal Intercom dial tone. Dial 9. You hear a second, “stutter” dial tone.
Page 127: Background Music
Background Music Description Background Music (BGM) sends music from a customer-provided music source to the speakers of the Multiline Telephone when the station is idle. Conditions An ACI [PGD(2)-U10 ADP] port must be used as an alternate External Music on Hold or Background Music source when different External MOH and BGM sources are required.
Page 128 Issue 5.0 UNIVERGE SV8100 Related Features Music on Hold Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-38-01 BGM Resource Setup – BGM Configure the Background Music 0 = CD-CP00 (MOH/ Resource Type Source input (0) for CD-CP00 or (1) for ACI Port.
Page 129 UNIVERGE SV8100 Issue 5.0 THIS PAGE INTENTIONALLY LEFT BLANK Background Music 1 - 119...
Page 130 Issue 5.0 UNIVERGE SV8100 1 - 120 Background Music...
Page 131: Barge-In
UNIVERGE SV8100 Issue 5.0 Barge-In Description Barge-In permits an extension user to break into another extension user’s established call, including Conference calls. This sets up a Conference-type conversation between the intruding extension and the parties on the initial call. With Barge-In, an extension user can get a message through to a busy co-worker right away.
Page 132 Issue 5.0 UNIVERGE SV8100 Default Setting Disabled System Availability Terminals Multiline and Single Line Terminals Required Component(s) None Related Features Call Monitoring Conference Hold Intercom Off-Hook Signaling Park Programmable Function Keys 1 - 122 Barge-In...
Page 133 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-08 Service Code Setup (for Service Determine what the service code MLT, SLT (default = 810) Access) – Barge-In should be for an internal party to use the Barge-In feature.
Page 134 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-32 Class of Service Options In an extension Class of Service, 0 = Off (Supplementary Service) – allow (1) or deny (0) the extension 1 = On Multiple Barge-Ins...
Page 135 UNIVERGE SV8100 Issue 5.0 Dial the single digit service code or the service code 810. To Barge-In to a Conference Call: Pick up the handset or press Speaker and dial the service code (default = 810). If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the system automatically places a callback to the extension.
Page 136 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 126 Barge-In...
Page 137: Battery Backup - System Memory
UNIVERGE SV8100 Issue 5.0 Battery Backup – System Memory Description The battery on the CD-CP00 retains the Clock/Calendar and Last Number Redial (LNR) buffers for each station when the CD-CP00 encounters a power loss. With a fully charged battery, the settings are retained for approximately three years.
Page 138 Issue 5.0 UNIVERGE SV8100 System Availability Terminals Not applicable Required Component(s) None Related Features Battery Backup – System Power Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 90-03-01 Save Data Use this program to save the Dial 1 + Press Hold...
Page 139: Battery Backup - System Power
The CD-CP00 is equipped with batteries for system battery backup. External Battery Pack can be connected to the system to provide extended time in the event of commercial power outage. Refer to the UNIVERGE SV8100 System Hardware Manual for further details.
Page 140 Issue 5.0 UNIVERGE SV8100 Programming None Operation None 1 - 130 Battery Backup – System Power...
Page 141: Call Appearance (Cap) Keys
Call Appearance (CAP) Keys Description This feature automatically places an outside call on a Call Appearance key when the system is operated as a hybrid (Multifunction) system. These keys can be assigned on any Multiline Terminal or the same key can appear on multiple terminals. This feature allows efficient call handling when numerous CO calls are received and a limited number of CO line key appearances are available.
Page 142 Issue 5.0 UNIVERGE SV8100 All Flexible Line keys on a multiline terminal can be assigned as CAP keys in System Programming. A conference call involving two outside lines cannot reside on one Call Appearance key. For Call Appearance (CAP) Keys, trunks must be assigned to trunk group 1 or higher (Program 14-05-01).
Page 143 UNIVERGE SV8100 Issue 5.0 Off-Hook Signaling Programmable Function Keys User Programming Ability Virtual Extensions Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Use to assign functions to multiline Line Key 1~48 terminal line keys.
Page 144 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 24-01-02 System Options for Hold – Hold A call that is parked longer than 0~64800 (seconds) Recall Callback Time the programmed interval recalls (default = 30) the extension where it was initially parked.
Page 145 UNIVERGE SV8100 Issue 5.0 Operation To place an outgoing call on hold and retrieve it using a multiline terminal: Go off-hook using the handset and wait for internal dial tone. - OR - Press Speaker and wait for internal dial tone.
Page 146 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 136 Call Appearance (CAP) Keys...
Page 147: Call Duration Timer
UNIVERGE SV8100 Issue 5.0 Call Duration Timer Description Call Duration Timer lets a multiline terminal with an LCD time their trunk calls on the telephone display. This helps users that must keep track of their time on the telephone. For incoming trunk calls, the Call Time begins as soon as the user answers the call.
Page 148 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to extensions. Class of Service of Extensions (1~15) Default: Extension port 101 =...
Page 149: Call Forwarding - Park And Page
UNIVERGE SV8100 Issue 5.0 Call Forwarding – Park and Page Description When an extension user is away from their phone, Park and Page can let them know when they have a call waiting to be answered. The Personal Greeting and Park & Page options can have up to 200 messages total (note that the Park &...
Page 150 Issue 5.0 UNIVERGE SV8100 message. System Availability Terminals None Required Component(s) InMail, PZ-VM21 and CD-CP00 Related Features Analog Communication Interface (ACI) Music on Hold 1 - 140 Call Forwarding – Park and Page...
Page 151 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-58 Service Code Setup (for Setup/ Call forward with Personal MLT, SLT Entry Operation) – Call Forward greeting VRS. Service code (default = 795) with Personal Greeting setup.
Page 152 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 31-04-01 External Paging Zone Group – Assign each External Paging Paging Group Number Paging Group Number Speaker to an External Paging 0~8 (0 = No Setting) Zone. Speaker 1 [PGD(2)-U10...
Page 153 UNIVERGE SV8100 Issue 5.0 If you already have Park and Page or Personal Greeting set up, you can dial: 3 to erase (the optionally HOLD to cancel the erase) 5 to listen (then # again to listen again) 7 to re-record Dial When you hear, “Please start recording,”...
Page 154 Issue 5.0 UNIVERGE SV8100 Dial the Park and Page type: 2 = All Calls 3 = Outside Calls Only Press Speaker to hang up (or go on-hook at the single line telephone). To pick up your Park and Page: Press Speaker (or lift the handset at the single line telephone).
Page 155: Call Forwarding
UNIVERGE SV8100 Issue 5.0 Call Forwarding Description Call Forwarding permits an extension user to redirect their calls to another extension or an off-premise number. Call Forwarding ensures that the user’s calls are covered when they are away from their work area.
Page 156 Issue 5.0 UNIVERGE SV8100 If an extension in a call forward chain has Call Forward with Both Ring or Call Forward with Follow Me set, calls do not continue routing to other extensions in the chain. Call Forwards can be chained allowing calls to forward from one extension to the next. Up to 32 extensions can be linked in a call forward chain.
Page 157 UNIVERGE SV8100 Issue 5.0 connection, it follows No Answer forwarding. When the following are done in sequence, Call Forwarding Busy/No Answer is set to extension Call Forwarding Immediate is set on extension Call Forwarding Immediate is cancelled on extension then, Call Forwarding Busy/No Answer is set back on the extension.
Page 158 Issue 5.0 UNIVERGE SV8100 Required Component(s) None Related Features Call Forwarding, Off-Premise Call Forwarding with Follow Me Call Forwarding/Do Not Disturb Override Central Office Calls, Answering Department Call Forward Department Calling Direct Station Selection (DSS) Console Do Not Disturb Programmable Function Keys...
Page 159 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-06 Service Code Setup (for System Set the service code for setting Administrator) – Setting the automatic transfer for each trunk (default = 833) Automatic Transfer for Each line.
Page 160 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-11-47 Service Code Setup (for Setup/ Set or Cancel the call forward no MLT, SLT Entry Operation) – Set/Cancel answer split. (default = 784) Call Forward No Answer (Split)
Page 161 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns Off (0) or On (1) the 0 = Off (Incoming Call Service) – extension ability to receive a 1 = On Second Call for DID/DISA/DIL/...
Page 162 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-05 Class of Service Options Turn On (1) or Off (0) the ability of 0 = Off (Supplementary Service) – an extension to receive Off-Hook 1 = On Intercom Off-Hook Signaling Signals.
Page 163 UNIVERGE SV8100 Issue 5.0 Operation To set Call Forward – Immediate at a forwarding station: Pick up the handset or press Speaker. Dial the Call Forward – Immediate Service Code (default: 848). - OR - At the multiline terminal only, press the Call Forwarding Programmable Function Keys.
Page 164 Issue 5.0 UNIVERGE SV8100 Refer to Call Forwarding – Park and Page on page 1-139. The Call Forwarding Programmable Function Key turns on. To cancel Call Forward – Busy/No Answer at a forwarding station: Pick up the handset or press Speaker.
Page 165 UNIVERGE SV8100 Issue 5.0 To set Call Forward – Follow Me from the destination station: Pick up the handset or press Speaker. Dial the Call Forward – Follow Me Service Code (default: 846). - OR - At the multiline terminal only, press the Call Forwarding Programmable Function keys.
Page 166 Issue 5.0 UNIVERGE SV8100 Dial 0 (Cancel). Dial the station number which is forwarded. Press Speaker or hang up. To set Call Forward Busy/No Answer for any Extension to Destination: Pick up the handset or press Speaker. Dial the Call Forward Busy/No Answer for any Extension to Destination Service Code (default: 794).
Page 167 UNIVERGE SV8100 Issue 5.0 Press Speaker or hang up. To set Call Forward – Busy/No Answer using a Virtual Extension: Press the idle Virtual Extension key. Dial the Call Forward – Busy/No Answer Service Code (Default: 844). Dial 1 (Set).
Page 168 Issue 5.0 UNIVERGE SV8100 To set Call Forward Split – Busy/No Answer at a forwarding station: Pick up the handset or press Speaker. Dial the Call Forward – Busy/No Answer Service Code (default: 785). Dial 1 (Set). Dial 1 (Internal) or 2 (external) Dial the destination extension or off-premise number.
Page 169: Call Forwarding With Follow Me
UNIVERGE SV8100 Issue 5.0 Call Forwarding with Follow Me Description While at a co-worker’s desk, a user can have Call Forwarding with Follow Me redirect their calls to the co-worker’s extension. This helps an employee who gets detained at a co-worker’s desk longer than expected.
Page 170 Issue 5.0 UNIVERGE SV8100 Related Features Do Not Disturb Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-07 Service Code Setup (for Setup/ Assign the service code of Call MLT, SLT Entry Operation) – Call Forward Follow Me.
Page 171 UNIVERGE SV8100 Issue 5.0 Dial 1 to set. Dial the Extension to forward. The multiline terminal with display indicates on the display of the telephone which Call Forward Follow Me is set. Also, the Programmed Follow Me Flexible Line Key flashes (if assigned) when Follow Me is set.
Page 172 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 162 Call Forwarding with Follow Me...
Page 173: Call Forwarding, Off-Premise
UNIVERGE SV8100 Issue 5.0 Call Forwarding, Off-Premise Description Off-Premise Call Forwarding allows an extension user to forward their calls to an off-site location. By enabling Call Forward, Off-Premise, the user can stay in touch by having the system forward their calls while they are away from the office.
Page 174 Issue 5.0 UNIVERGE SV8100 answer. Door Boxes must be programmed for the calls to be transferred Off-Premise. The outside number Call Forwarding dials can only be a number normally allowed by the forwarded extension Toll Restriction. In systems with a DSP daughter board for VRS, callers to an extension forwarded off-premise hear, “Please hold on, your call is being rerouted.”...
Page 175 UNIVERGE SV8100 Issue 5.0 Virtual Extensions Voice Response System (VRS) Call Forwarding, Off-Premise 1 - 165...
Page 176 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-09-01 DTMF and Dial Tone Circuit Allocate the circuits on the 0 = Common Use Setup CD-CP00 ETUs for either DTMF 1 = Extension Only receiving or dial tone detection.
Page 177 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-11-48 Service Code Setup (for Setup/ Use to assign the Call Forward MLT, SLT Entry Operation) – Set/Cancel Busy No Answer Split Service (default not assigned) Call Forward Busy/No Answer Code.
Page 178 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns Off (0) or On (1) the 0 = Off (Incoming Call Service) – extension ability to receive a 1 = On Second Call for DID/DISA/DIL/...
Page 179 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 24-09-01 Call Forward Split Settings – Call Use to assign Call Forwarding 0 = Call Forwarding Off Forwarding Type Type and destination numbers for 1 = Call Forwarding each extension/virtual extension.
Page 180 Issue 5.0 UNIVERGE SV8100 Trunk-to-Trunk Forwarding – Normal (0) Trunks Program Program Name Description/Comments Assigned Data Number 11-10-06 Service Code Setup (for System Customize the service code to be Administrator) – Setting the used to set the Automatic Trunk (default = 833) Automatic Transfer for each Forwarding feature.
Page 181 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup – Used to assign the incoming trunk 0 = Normal Incoming Type type for each trunk. There is one 1 = VRS (second dial item for each Mode.
Page 182 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-11-27 Service Code Setup (for Setup/ Customize the service code to be Entry Operation) – Destination of used to set the destination for the (default = 704) Automatic Transfer Each...
Page 183 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign an Automatic Forwarding Line Key 1~48 at Department Group key (58) or a 0~99 (Normal Function Delayed Forwarding at Code 851 by default) Department Group key (59) for an 00 ~ extension user.
Page 184 Issue 5.0 UNIVERGE SV8100 Trunk-to-Trunk Forwarding – DID (3) Trunk Forwarding Using DID Translation Table Refer to Direct Inward Dialing (DID) for additional DID programming. Program Program Name Description/Comments Assigned Data Number 22-11-05 DID Translation Table Number For each DID Translation Table 0 = No Setting Conversion –...
Page 185 UNIVERGE SV8100 Issue 5.0 - OR - At a single line telephone, lift the handset. Dial the Call Forward Access Code (default not assigned). Dial 0 (Cancel). To activate Call Forwarding Off-Premise Split: At a multiline terminal, press Speaker. - OR - At a single line telephone, lift the handset.
Page 186 Issue 5.0 UNIVERGE SV8100 To activate Call Forwarding Off-Premise for a Door Box: This option only works for ISDN PRI or BRI Trunks. At the multiline terminal, press Speaker + dial SC 822. - OR - At the multiline terminal only, press Call Forward (Device) key (Program 15-07-01 or SC 851, code 54).
Page 187 UNIVERGE SV8100 Issue 5.0 Cancel the Line Forwarding: Lift the handset. Dial 835. Dial trunk port number (7 001~200) to be defined. Select the mode (1~8) to be defined. Press the Exit key. Press Speaker to hang up. Automatic Trunk-to-Trunk Transfer (Step Transfer) (follows the predefined destination in Program 24-04-01) Set Automatic Trunk Forwarding: The Speed Dial bin must be defined in Program 13-04-01 for the line to forward.
Page 188 Issue 5.0 UNIVERGE SV8100 Press Hold to accept the entry. Repeat from Step 3 to define another time mode entry or press Speaker to hang up. Cancel the Line Forwarding: Lift the handset. Dial 704. Dial the Department Group number (01~64) to be defined.
Page 189: Call Forwarding/Do Not Disturb Override
UNIVERGE SV8100 Issue 5.0 Call Forwarding/Do Not Disturb Override Description An extension user can override Call Forwarding or Do Not Disturb at another extension. This is helpful, for example, to dispatchers and office managers that always need to get through.
Page 190 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-01 Service Code Setup (for Service Customize the Service Code MLT, SLT Access) – Bypass Call which is to be used for Call (default = 807) Forwarding/DND Override.
Page 191 UNIVERGE SV8100 Issue 5.0 Operation To override an extension Call Forwarding or Do Not Disturb: Call the forwarded or DND extension. Press the Override key (Program 15-07 or SC 851: 37) or dial 807. Call Forwarding/Do Not Disturb Override 1 - 181...
Page 192 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 182 Call Forwarding/Do Not Disturb Override...
Page 193: Call Monitoring
UNIVERGE SV8100 Issue 5.0 Call Monitoring Description Call Monitoring allows selected Multiline Terminal Users to monitor another user’s conversation without the ability to participate. A programmable audible alert tone can be sent to that station user. Without the audible alert (silent monitor), no indication is provided to either the monitored station or the outside party.
Page 194 Issue 5.0 UNIVERGE SV8100 With Program 20-13-10 set to 1, a call which is being Monitored can be placed on park by the originator of the outside call, but only the outside caller is placed in park. The extension which is monitoring the call is dropped.
Page 195 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-08 Service Code Setup (for Service Determine what the service code MLT, SLT Access) – Barge-In should be for an internal party to (default = 810) use the Barge-In feature.
Page 196 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-45 Class of Service Options Set per class of service, when in 0 = Enable (Supplementary Service) – MIC Call Monitoring Mode determines 1 = Disable Key Mode While Call Monitoring...
Page 197 UNIVERGE SV8100 Issue 5.0 To Call Monitor after calling a busy extension: Call a busy extension. Press the Barge-In key (Program 15-07 or SC 851: 34). - OR - The following steps are not available for DISA or Tie Line trunks.
Page 198 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 188 Call Monitoring...
Page 199: Call Redirect
UNIVERGE SV8100 Issue 5.0 Call Redirect Description Call Redirect allows a multiline terminal user to transfer a call to a pre-defined destination (such as an operator, voice mail, or another extension) without answering the call. This can be useful if you are on a call and another rings in to your extension.
Page 200 Issue 5.0 UNIVERGE SV8100 System Availability Terminals Any Multiline Terminal Required Component(s) None Related Features None 1 - 190 Call Redirect...
Page 201 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Use to assign functions to multiline Line Key 1~48 terminal line keys. 0~99 (Normal Function Code 851 by default) 00 ~...
Page 202 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 192 Call Redirect...
Page 203: Call Waiting/Camp-On
UNIVERGE SV8100 Issue 5.0 Call Waiting/Camp-On Description With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) without hanging up. When the user Camps-On, the system signals the busy extension with two beeps indicating the waiting call.
Page 204 Issue 5.0 UNIVERGE SV8100 Related Features Callback Off-Hook Signaling Programmable Function Keys Transfer Trunk Queuing/Camp On Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-23 Service Code Setup (for Setup/ This service code enables Second Entry Operation) – Second Call...
Page 205 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-02-12 Multiline Telephone Basic Data Use this option to set the 0 = Muted Off-Hook Setup – Off-Hook Ringing telephone Off-Hook signaling. Ringing 1 = No Off-Hook Ringing 2 = Not Used...
Page 206 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns Off (0) or On (1) the 0 = Off (Incoming Call Service) – extension ability to receive a 1 = On Second Call for DID/DISA/DDI/...
Page 207 UNIVERGE SV8100 Issue 5.0 Operation To Camp-On a busy extension: Call the busy extension. Dial 850 or press the Camp-On key (Program 15-07 or SC 851: 35). Do not hang up. To camp-on to a trunk, refer to Trunk Queuing/Camp-On on page 1-1029.
Page 208 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 198 Call Waiting/Camp-On...
Page 209: Callback
UNIVERGE SV8100 Issue 5.0 Callback Description When an extension user calls a co-worker that does not answer or is busy, they can leave a Callback request for a return call. The user does not have to repeatedly call the unanswered extension back, hoping to find it idle.
Page 210 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Stations Required Component(s) None Related Features Call Waiting/Camp-On) Programmable Function Keys 1 - 200 Callback...
Page 211 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-05 Service Code Setup (for Service If required, redefine the service MLT, SLT Access) – Cancel Camp-On code used cancel Camp-On. (default = 870) 11-12-44...
Page 212 Issue 5.0 UNIVERGE SV8100 To cancel a Callback: At the multiline terminal, press Speaker and Dial 870. - OR - At the multiline terminal, press Camp-On key (Program 15-07 or SC 851: 35). - OR - At the single line telephone, lift the handset and dial 870.
Page 213 UNIVERGE SV8100 Issue 5.0 To test Callback at a single line telephone: Lift the handset. Dial 899. Hang up. When the telephone rings, lift the handset. You hear the Hold tone. Hang up. Callback 1 - 203...
Page 214 Issue 5.0 UNIVERGE SV8100 1 - 204 Callback...
Page 215: Caller Id Call Return
UNIVERGE SV8100 Issue 5.0 Caller ID Call Return Description The Caller ID Call Return feature allows the voice mail system to use Caller ID information captured with the message to call and connect the person that left the message with the voice mail user that is checking messages.
Page 216 Issue 5.0 UNIVERGE SV8100 Required Component(s) InMail Related Features InMail Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-22 Basic Trunk Data Setup – Caller Enable (1) or disable (0) the Trunks 1~200 ID to Voice Mail...
Page 217: Caller Id
UNIVERGE SV8100 Issue 5.0 Caller ID Description Caller ID allows a display terminal to show an incoming caller’s telephone number (called the Directory Number or DN) and optional name. The Caller ID information is available as pre-answer display. With the pre-answer display, the user previews the caller’s number before picking up the ringing line.
Page 218 Incoming Caller ID: 12345678901234567890 (20 digits) UNIVERGE SV8100 Wireless Dials: 123456 *123456789012 Caller ID Sender Queuing Added The UNIVERGE SV8100 system can provide Caller ID (calling party number) to a single line telephone with a display. 1 - 208 Caller ID...
Page 219 The system can queue incoming calls to the single line telephone if the system Caller ID sender resources are busy. Refer to Program 20-19-05 in the UNIVERGE SV8100 Programming Manual. If the single line telephone user lifts their handset while an incoming call is waiting in queue, they hear silence (no dial tone) and cannot dial out.
Page 220 Issue 5.0 UNIVERGE SV8100 When there are more than 20 characters set in Program 20-20 : Message Setup for Non-Caller ID Data, either the first or last character is missing (based on the entry in Program 20-19-01). If Program 20-09-06: Class of Service Options (Incoming Call Service): Incoming Time Display is set to 1 (On), the first line displays the time and date.
Page 221 UNIVERGE SV8100 Issue 5.0 Related Features Automatic Route Selection Call Arrival (CAR) Keys Caller ID Call Return Conference, Voice Call/Privacy Release Park Speed Dial – System/Group/Station Station Message Detail Recording InMail Caller ID 1 - 211...
Page 222 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-02-04 Location Setup – Area Code Enter the local area code. (default not assigned) 10-02-05 Location Setup – Trunk Access Enter the trunk access code digits...
Page 223 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 13-04-09 Memo 2 Define Memo Display information Maximum of 28 digits. tied to Common Speed Dial bin or (default - not assigned) Telephone Book which match with incoming Caller ID. This will be displayed in LCD Line 2.
Page 224 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-02-57 Caller Log On Busy Defines whether calls received 0 = Off (Default) whilst the station was busy are 1 = On logged in the call logs 15-02-58 Display Mode of Incoming Trunk...
Page 225 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-08-15 Class of Service Options Turn Off (0) or On (1) a user Class 0 = Off (Outgoing Call Service) – Block of Service from automatically 1 = On...
Page 226 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-20-01 Message Setup for Non-Caller ID Enter the text to be displayed for 24 Alphanumeric Data – Private Call Caller ID when a user receives a Characters call which is classified as a private (default = PRIVATE) call.
Page 227 UNIVERGE SV8100 Issue 5.0 ↑ ↓ Store = List Number xx = Caller ID number mm-dd hh:mm = incoming date and time ↑ = Preview List ↓ = Next List Store = Store in List DEL = Delete from List Press the STORE Softkey.
Page 228 Issue 5.0 UNIVERGE SV8100 Dial the Speed Dial bin in which the number is to be stored. If you press Hold, the next available Speed Dial bin will be used. The display shows: SYS XXXX: xxxxxxxxxxxxx If all Speed Dial bins are used, the display shows “TABLE IS FULL”.
Page 229 UNIVERGE SV8100 Issue 5.0 Press Transfer. The display shows: SET SYS Press Speaker. The telephone returns to idle. To store a Caller ID number in a One-Touch key: With a telephone in an idle condition the display shows: 1-01 FRI 09:00AM...
Page 230: Table 1-5 Keys For Entering Names
Issue 5.0 UNIVERGE SV8100 Press the One-Touch key in which the number is to be stored or dial 1~9, 0. If you press Hold, the next available One-Touch key will be used. The display shows: ## : xxxxxxxxxxxxx If all One-Touch keys are used, the display shows “TABLE IS FULL”.
Page 231 UNIVERGE SV8100 Issue 5.0 Checking your Answered/Unanswered Caller ID Calls To review the last 50 outside calls your extension received: At a display multiline terminal, press the LIST Softkey. Press CID. The first row of your display shows the Caller ID number. If there is an “...
Page 232 Issue 5.0 UNIVERGE SV8100 1 - 222 Caller ID...
Page 233: Caller Id - Flexible Ringing
UNIVERGE SV8100 Issue 5.0 Caller ID – Flexible Ringing Description The Caller ID – Flexible Ringing feature provides several different options for rerouting calls based on the Caller ID received. Reject/Reroute “Private” Caller ID Calls When an analog or ISDN trunk call is received with “Private” Caller ID information, the SV8100 can reject the call by playing a VRS message or it can route the call to an alternative extension or incoming ring group programmed in Program 22-18-01.
Page 234 Program 13-04-05: 2 (tone pattern 2) Conditions Caller ID Matching. The Univerge SV8100 compares the Caller ID and programmed Speed Dial and allows/ denies as indicated below. The Speed Dial table is searched from the starting number and the first match result is used.
Page 235: Table 1-6 Caller Id Matching Rule
UNIVERGE SV8100 Issue 5.0 Program 13-04 will follow Common or Group Speed Dial numbers. Caller ID Matching Rule: The system compares the Caller ID and programmed Speed Dial with these rules below. Table 1-6 Caller ID Matching Rule Caller ID...
Page 236 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-32 Service Code Setup (for System Enable/Disable the Private Call MLT, SLT Administrator) – Set Private Call Refuse (trunks) which are set in (default not assigned) Refuse Program 14-01-27.
Page 237 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 13-04-05 Speed Dialing Number and Name Define the ring tone for the caller Incoming Ring Pattern – Incoming Ring Pattern ID routed call. 0 = Normal Pattern 1 ~ 4 = Tone Pattern...
Page 238 Issue 5.0 UNIVERGE SV8100 Incoming Trunk Call Caller ID Number exists? Go to Chart 2 Search refusing Speed Dial area PRG 22-16 data exists? PRG 14-01-27 :1 And refuse mode is? Play VRS Message Search PRG 13-04-01 PRG 40-10-07 Data unmatched...
Page 239 UNIVERGE SV8100 Issue 5.0 PRG 14-01-27 :1 And refuse mode is? Reason of No Caller ID? Anything Else Private PRG 22-18-01 Play VRS Message PRG 40-10-07 Ring the extension Ring the incoming Disconnect the call Follow PRG 22-02-01 number ring group...
Page 240 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 230 Caller ID – Flexible Ringing...
Page 241: Central Office Calls, Answering
UNIVERGE SV8100 Issue 5.0 Central Office Calls, Answering Description The system provides flexible routing of incoming CO (trunks) calls to meet the exact site requirements. This lets trunk calls ring and be answered at any combination of system extensions. A maximum of 200 trunks are available.
Page 242 Issue 5.0 UNIVERGE SV8100 An extension user can answer an outside call just by lifting the handset. Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time period. Using the Warning Tone for Long Conversation feature allows users on outgoing calls to hear a warning tone prior to the call disconnecting.
Page 243 UNIVERGE SV8100 Issue 5.0 Direct Inward Dialing (DID) Direct Inward Line (DIL) Direct Inward System Access (DISA) Directed Call Pickup Do Not Disturb Group Call Pickup ISDN Compatibility Line Preference Long Conversation Cutoff Night Service Programmable Function Keys Selectable Display Messaging...
Page 244 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-XX ETU Setup Use program 10-03-XX to setup The assigned data and confirm the basic varies depending on configuration data for each blade. the blade installed in This program represents different the slot.
Page 245 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 14-06-01 Trunk Group Routing – Priority Used to set the priority order 0 = Not Specify1~100 : Order Number number 1~4. (Trunk Group Number)1001~1100 : (1000 + Route Table...
Page 246 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-02-01 Multiline Telephone Basic Data Use to define the display language 0 = Japanese for Multiline terminals. (To select Setup – Display Language 1 = English options 8~10, press either 8 or...
Page 247 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-06-01 Trunk Access Map for Assign Trunk Access Maps to Trunks 1~200 Extensions extensions. (default = 1) 15-07-01 Programmable Function Keys Use to assign functions to multiline Line Key 1~48 terminal line keys.
Page 248 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-10-07 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Answer Service) – Automatic extension to use Universal Auto 1 = On Off-Hook Answer...
Page 249 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup Use this option to set the feature Trunks 1~200 type for the trunk you are 0 = Normal programming. 1 = VRS (second dial tone if no...
Page 250 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 22-08-01 DIL/IRG No Answer Destination If an incoming trunk call rings 0 (No Setting) longer than the DIL No Answer 001~100 Time (Program 22-01-04), it routes (Incoming Ring Group)
Page 251 UNIVERGE SV8100 Issue 5.0 If you hear error tone, your extension Class of Service prevents Universal Answer. Central Office Calls, Answering 1 - 241...
Page 252 Issue 5.0 UNIVERGE SV8100 To listen to the incoming trunk ring choices: Press Speaker. Dial 811 + 2. Select the ringing (1~8) and tone range (1~4) you want to check. Go back to step 3 to listen to additional choices or press Speaker to hang up.
Page 253 UNIVERGE SV8100 Issue 5.0 THIS PAGE INTENTIONALLY LEFT BLANK Central Office Calls, Answering 1 - 243...
Page 254 Issue 5.0 UNIVERGE SV8100 1 - 244 Central Office Calls, Answering...
Page 255: Central Office Calls, Placing
UNIVERGE SV8100 Issue 5.0 Central Office Calls, Placing Description The system provides flexibility in the way each extension user can place outgoing trunk calls. This lets you customize the call placing options to meet site requirements and each individual’s needs. To place a...
Page 256 Issue 5.0 UNIVERGE SV8100 preselect a line key before lifting the handset or pressing Speaker. Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time period. Using the Warning Tone for Long Conversation feature allows users on outgoing calls to hear a warning tone prior to the call disconnecting.
Page 257 UNIVERGE SV8100 Issue 5.0 Long Conversation Cutoff Microphone Cutoff Programmable Function Keys Trunk Group Routing Trunk Groups Central Office Calls, Placing 1 - 247...
Page 258 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-XX ETU Setup Use program 10-03-XX to setup The assigned data and confirm the basic varies depending on configuration data for each blade. the blade installed in This program represents different the slot.
Page 259 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 14-01-02 Basic Trunk Data Setup – Customize the transmit and Trunks 1~200 Transmit Level receive levels of the CODEC Gain 1~63 Types for each trunk. (-15.5 ~ +15.5dB in 0.5dB intervals)
Page 260 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 14-06-01 Trunk Group Routing – Priority Used to set the priority order 0 = Not Specify1~100 : Order Number number 1~4. (Trunk Group Number)1001~1100 : (1000 + Route Table...
Page 261 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-02-01 Multiline Telephone Basic Data Use to define the display language 0 = Japanese for Multiline terminals. Setup – Display Language 1 = English Selection 2 = German (To select options 8~10, press...
Page 262 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-13-02 Loop Key - Incoming Used to define an incoming loop 0~100(0 = Assigns Loop Key to all Trunk Groups 1~100 = Assigns Loop Key to specified Trunk Group...
Page 263 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 21-01-17 System Options for Outgoing With the Outgoing Disable on Digits 0~9 Calls – Restriction Digit in Incoming Line feature, determine (default = 4) Outgoing Disable on Incoming the number of digits (0~9) to be...
Page 264 Issue 5.0 UNIVERGE SV8100 Operation To place a call over a trunk group: Go off-hook. Dial 804. Dial trunk group number (001~100). Dial the number. - OR - At the multiline terminal, press the trunk group key (Program 15-07-01 or SC 851: *02 + group).
Page 265 UNIVERGE SV8100 Issue 5.0 To Remove a Trunk from a Busied Out State: Press Speaker + 745 + Trunk Number (001~200) + 0. Central Office Calls, Placing 1 - 255...
Page 266 Issue 5.0 UNIVERGE SV8100 1 - 256 Central Office Calls, Placing...
Page 267: Class Of Service
UNIVERGE SV8100 Issue 5.0 Class of Service Description Class of Service (COS) sets various features and dialing options (called items) for extensions. The system allows any number of extensions to share the same Class of Service. An extension can have a different Class of Service for each of the Night Service modes.
Page 268 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Stations Required Component(s) None Related Features Night Service 1 - 258 Class of Service...
Page 269 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-24 Service Code Setup (for Setup/ If required, use this option to Entry Operation) – Change change the Service Code a user (default = 777)
Page 270 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-07-11 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Forced extension to use Forced Trunk 1 = On Trunk Disconnect (analog trunk Disconnect.
Page 271 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-20 Class of Service Options Determine if the Accumulated 0 = Off (Administrator Level) – SMDR Account Code Data is included in 1 = On Printout Accumulated Account the SMDR printout for each Class...
Page 272 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-08-04 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Outgoing Call Service) – Group extension ability to make outbound 1 = On Speed Dialing...
Page 273 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-08-15 Class of Service Options Turn Off (0) or On (1) a user Class 0 = Off (Outgoing Call Service) – Block of Service from automatically 1 = On...
Page 274 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns off or on the extension 0 = Off (Incoming Call Service) – ability to receive a second call 1 = On Second Call for DID/DISA/DIL/...
Page 275 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-10-01 Class of Service Options Turn off or on Group Call Pickup 0 = Off (Answer Service) – Group Call for calls ringing an extension 1 = On Pickup (Within Group)
Page 276 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-11-02 Class of Service Options (Hold/ In an extension Class of Service, 0 = Off Transfer Service) – Call Forward turn On (1) or Off (0) the ability of...
Page 277 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-11-13 Class of Service Options (Hold/ Turn off or on an extension ability 0 = Off Transfer Service) – Operator to have a call which recalls from 1 = On Transfer After Hold Callback hold transfer to the operator.
Page 278 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-11-23 Class of Service Options (Hold/ In an extension Class of Service, 0 = Off Transfer Service) – CAR/VE Call turn On (1) or Off (0) the ability to...
Page 279 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-05 Class of Service Options Turn On (1) or Off (0) the ability of 0 = Off (Supplementary Service) – an extension to receive Off-Hook 1 = On Intercom Off-Hook Signaling Signals.
Page 280 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-16 Class of Service Options In an extension Class of Service, 0 = Off (Supplementary Service) – turn On (1) or Off (0) Barge-In at 1 = On Barge-In, Receive the receiving extension (i.e.,...
Page 281 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-27 Class of Service Options If set to 1, you can call a busy 0 = Off (Supplementary Service) – Busy extension which is talking on a 1 = On on Seizing Virtual Extension virtual extension key.
Page 282 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-39 Class of Service Options Turn off or on the ACD Queue 0 = Off (Supplementary Service) – ACD Status Display for an extension 1 = On Queue Status Display Class of Service.
Page 283 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-51 Class of Service Options Determine if an extension name 0 = Off (Supplementary Service) – and number are listed (On) or 1 = On Number and Name appear in the unlisted (Off) in the directory.
Page 284 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-14-10 Class of Service Options for Enable or disable a DISA callers 0 = Off DISA/E&M – Call Forward Setting ability to use the Call Forward 1 = On...
Page 285 UNIVERGE SV8100 Issue 5.0 Enter the Day 2 Mode Class of Service for the extension you selected in step 3 and press Hold. You see: MODE6:nn Press Hold to leave the current value unchanged. Class of Service 1 - 275...
Page 286 Issue 5.0 UNIVERGE SV8100 Enter the Night 2 Mode Class of Service for the extension you selected in step 3 and press Hold. You see: MODE7:nn Press Hold to leave the current value unchanged. Enter the Midnight 2 Mode Class of Service for the extension you selected in step 3 and press Hold.
Page 287: Clock/Calendar Display
UNIVERGE SV8100 Issue 5.0 Clock/Calendar Display Description The system uses Clock/Calendar Display for: Central Office Calls (Access Maps) Station Message Detail Recording Class of Service (Class) System Reports Direct Inward Lines Toll Restriction (Class) Display Telephones Trunk Group Routing Night Service (Automatic)
Page 288 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Multiline Terminals with a display Required Component(s) None Related Features Class of Service Night Service Single Line Telephones InMail Voice Mail Integration (Analog) Guide to Feature Programming Program Program Name Description/Comments Assigned Data...
Page 289 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 10-01-07 Time and Date – Second Enter two digits (00~59) for the 00~59 seconds. (default not assigned) 10-24-01 Daylight Savings Setup – Enable (1) or disable (0) the 0 = Disable...
Page 290 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to extensions. Class of Service of Extensions (1~15) Default: Extension port 101 = Class 15...
Page 291 UNIVERGE SV8100 Issue 5.0 Operation The date must be set in system programming (10-01). To set the system Time: Press Speaker. Dial 828. Dial two digits for the hour (24 hour clock, 13 = 1:00 PM). Dial two digits for the minutes (00~59).
Page 292 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 282 Clock/Calendar Display...
Page 293: Code Restriction
UNIVERGE SV8100 Issue 5.0 Code Restriction Description Code Restriction limits the numbers an extension user may dial. By allowing extensions to place only certain types of calls, you can better control long distance costs. The system applies Code Restriction according to the Code Restriction Class. The system allows for up to 15 Code Restriction Classes and...
Page 294 Issue 5.0 UNIVERGE SV8100 system restricts calls that you enter only in the Restrict Code Table. Calls entered in both tables are not restricted.) The system provides four tables, with 60 entries (restricted codes) in each table. A restricted code is 12 digits maximum, using 0~9, , * and Recall (as a wild card).
Page 295 UNIVERGE SV8100 Issue 5.0 Certain trunks can be completely unrestricted, such as the company president’s Private Line. Users can place calls on Code Free Trunks anytime – to anywhere, without inadvertently being Code restricted. PBX Call Restriction Code Restriction programming lets you enable/disable PBX Call Restriction and enter PBX access codes.
Page 296 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Stations Required Component(s) None Related Features Central Office Calls, Placing Code Restriction Override Code Restriction, Dial Block Direct Inward System Access (DISA) PBX Compatibility Multiple Trunk Types 1 - 286 Code Restriction...
Page 297 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-08 Basic Trunk Data Setup – Toll For each trunk, enter 1 to enable 0 = Restriction Restriction Toll Restriction; enter 0 to disable Disabled (No) Code Restriction.
Page 298 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 21-01-15 System Options for Outgoing Enable or disable the Incoming 0 = Disable Calls – Outgoing Disable on Line feature system wide. When 1 = Enable Incoming Line (Toll Restriction)
Page 299 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 21-05-06 Toll Restriction Class – Common It chooses whether the table set 0 = Unassigned Restriction Table up by Program 21-06-05 is 1 = Assigned referred to, or not referred to.
Page 300 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 21-06-02 Toll Restriction Table Data Setup Enter the international dialing Dial (Up to six digits) – International Call Permit Code codes you want to permit. Default: Table Tables 1~20 = No...
Page 301 UNIVERGE SV8100 Issue 5.0 Operation To place a trunk call if your system is Code Restricted: Place call normally. If your Code Restriction Class does not allow the number you dial, your call is cut off. Code Restriction 1 - 291...
Page 302 Issue 5.0 UNIVERGE SV8100 1 - 292 Code Restriction...
Page 303: Code Restriction In Credit
UNIVERGE SV8100 Issue 5.0 Code Restriction In Credit Description Toll Restriction In Credit allows an administrator to set a limit to the cost of outgoing calls calls made by individual extensions. When the cost limit is reached no further calls can be made from the extension until the restriction is reset by the administrator.
Page 304 Issue 5.0 UNIVERGE SV8100 System Availability Terminals: Required Component(s) None Related Features Code Restriction Dial Block 1 - 294 Code Restriction In Credit...
Page 305 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-11 Service Code Setup (for System Assign a service code to be used Administration) – Code by the supervisor to set Code (default = 774)
Page 306 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 21-05-06 Toll Restriction Class – Common It chooses whether the table set 0 = Unassigned Restriction Table up by Program 21-06-05 is 1 = Assigned referred to, or not referred to.
Page 307 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 21-06-02 Toll Restriction Table Data Setup Enter the international dialing Dial (Up to six digits) – International Call Permit Code codes you want to permit. Default: Table Tables 1~20 = No...
Page 308 Issue 5.0 UNIVERGE SV8100 Operation To set Credit limit for an extension: At the administrator terminal, press Speaker Dial the service code for Toll Restriction in Credit (774 default). Dial the telephone number of the phone you want to set/check.
Page 309: Code Restriction Override
UNIVERGE SV8100 Issue 5.0 Code Restriction Override Description Code Restriction Override lets a user temporarily bypass the Code Restriction for an extension. This helps a user that must place an important call that Code Restriction normally prevents. For example, you could set up Code Restriction to block 100 calls and then provide a Code Restriction Override code to your attendant and executives.
Page 310 Issue 5.0 UNIVERGE SV8100 Code Restriction Station Message Detail Recording Voice Response System (VRS) 1 - 300 Code Restriction Override...
Page 311 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-34 Service Code Setup (for Setup/ If required, change the service MLT, SLT Entry Operation) – Temporary code (875) for Temporary Toll (default = 875) Toll Restriction Override Restriction Override.
Page 312 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 35-02-04 SMDR Output Options – Set this option to (1) to have the 0 = Not Displayed Summary (Daily) SMDR report provide a daily 1 = Displayed summary (at midnight every night).
Page 313 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 35-02-16 SMDR Output Options – Trunk Determine how the SMDR should 0 = Trunk Port Name Name or Received Dialed print incoming calls on ANI/DNIS 1 = Received Dialed Number or DID trunks.
Page 314 Issue 5.0 UNIVERGE SV8100 Walking Code Restriction 763? 1 - 304 Code Restriction Override...
Page 315 UNIVERGE SV8100 Issue 5.0 Temporary Code Restriction Override service code 763 be changed 875? Code Restriction Override 1 - 305...
Page 316 Issue 5.0 UNIVERGE SV8100 Operation To temporarily override a restricted extension Code Restriction: You can override restriction for only one call at a time. At the multiline terminal, press Speaker. - OR - At single line telephone, lift the handset.
Page 317: Code Restriction, Dial Block
UNIVERGE SV8100 Issue 5.0 Code Restriction, Dial Block Description Code Restriction, Dial Block lets a user temporarily block dialing on an extension. This helps a user block his or her phone from being used by another person while they are away from their desk. A user would need to enter a 4-digit personal code to enable/disable this feature.
Page 318 Issue 5.0 UNIVERGE SV8100 Related Features None 1 - 308 Code Restriction, Dial Block...
Page 319 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-17 Service Code Setup (for System Assign a service code to be used Administration) – Dial Block by by the supervisor to set Dial Block...
Page 320 Issue 5.0 UNIVERGE SV8100 At the single line telephone, lift the handset. Dial 700 (default). Dial the 4-digit Dial Block Code (as set in programming). Dial 1. Confirmation tone is heard. Press Speaker or replace the handset to hang up.
Page 321 UNIVERGE SV8100 Issue 5.0 Dial 701. Dial the 4-digit Dial Block code. Dial the extension number to be released from Dial Block. Dial 0. Confirmation tone is heard. Press Speaker or replace the handset to hang up. Code Restriction, Dial Block...
Page 322 Issue 5.0 UNIVERGE SV8100 1 - 312 Code Restriction, Dial Block...
Page 323: Conference
UNIVERGE SV8100 Issue 5.0 Conference Description Conference lets an extension user add additional inside and outside callers to their conversation. With Conference, a user can set up a multiple-party telephone meeting without leaving the office. The CD-CP00 provides 64 conference ports, allowing any number of internal or external parties to be conferenced together for a limit of 32 parties.
Page 324 Issue 5.0 UNIVERGE SV8100 When set for Conference, with an active call, the user presses Conf, places a second call, then presses Conf twice. All the calls are then connected. Users can Barge-In on a Conference call if allowed in programming.
Page 325 UNIVERGE SV8100 Issue 5.0 Required Component(s) None Related Features None Conference 1 - 315...
Page 326 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-08 Service Code Setup (for Service Determine what the service code MLT, SLT Access) – Barge-In should be for an internal party to (default = 810) use the Barge-In feature.
Page 327 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-11-21 Class of Service Options (Hold/ Allow (0) or deny (1) an extension 0 = Off Transfer Service) – Restriction users’s ability to set up a tandem/ 1 = On...
Page 328 Issue 5.0 UNIVERGE SV8100 To get the outside call, you can either press a line key or press the Speaker key and dial 9, the Trunk Access Code + the trunk number (default 805). You can optionally go back to step 2 to add more parties to your Conference.
Page 329 UNIVERGE SV8100 Issue 5.0 Single Line Telephone Establish Intercom or trunk call. Hookflash and dial 826. Dial extension you want to add. - OR - Access trunk call. - OR - Retrieve call from Park orbit. Hookflash and repeat step 3 to add more parties.
Page 330 Issue 5.0 UNIVERGE SV8100 To exit a Conference without affecting the other parties: Multiline Terminal Hang up. If you press Hold while on a call with two outside callers, the outside callers hear what is programmed in Program 10-04-01. Single Line Telephone Hang up.
Page 331 UNIVERGE SV8100 Issue 5.0 Dial the extension number or press a DSS key of a telephone in a Conference call. If an error tone is heard, Barge-In is not enabled for the extension and the call cannot go through. Retrieve the call by pressing the flashing line or Call Appearance (CAP) Key or hang up and the call recalls the extension.
Page 332 Issue 5.0 UNIVERGE SV8100 1 - 322 Conference...
Page 333: Conference, Remote
UNIVERGE SV8100 Issue 5.0 Conference, Remote Description The Remote Conference feature enhances the Conference feature by allowing outside parties to dial a Remote Conference pilot number and a Conference Group number to connect to a Conference call.The conference circuits on the CD-CP00 are used to join each party to the conference. A maximum of 32 conference participants is possible for one Conference.
Page 334 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-19-01 Remote Conference Pilot Dial (Up to 8 digits) Assign the pilot number (up to 8 Number Setup - Maximum (default: No Remote digits) to be used for the Remote...
Page 335 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-34-02 Remote Conference Group For each conference group, define Fixed 4 digits dial Setup - Password the 4-digit password of a Remote (0-9,@) Conference. (default: Group1 - 1111 Group2 - 2222...
Page 336 Issue 5.0 UNIVERGE SV8100 Transfer Calls cannot be transferred to the Remote Conference session. Operation To joining a Remote Conference Call: Internal Extension: Lift the handset and dial the extension number of the Remote Conference pilot number (assigned in Program 11-19-01).
Page 337: Conference, Voice Call/Privacy Release
UNIVERGE SV8100 Issue 5.0 Conference, Voice Call/Privacy Release Description Voice Call Conference lets extension users in the same work area join in a trunk Conference. To initiate a Voice Call Conference, an extension user just presses the Meet-Me Conference key and tells their co-workers to join the call.
Page 338 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Multiline Terminals Required Component(s) None Related Features Caller ID Conference Programmable Function Keys 1 - 328 Conference, Voice Call/Privacy Release...
Page 339 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-19 Basic Trunk Data Setup – Determine if a trunk should be 0 = Disable Private Privacy Mode Toggle Option able to be toggled to a private/...
Page 340 Issue 5.0 UNIVERGE SV8100 To exit a Voice Call Conference without affecting the other parties: Press Speaker to hang up. To toggle between Private and Non-Private mode: Press the Meet-Me Conference key (Program 15-07-01, SC 851: 32). - OR - Press the Trunk Line Key.
Page 341: Continued Dialing
UNIVERGE SV8100 Issue 5.0 Continued Dialing Description Continued Dialing allows an extension user to dial a call, wait for the called party to answer and then dial additional digits. This helps users that need services like Voice Mail, automatic banking and Other Common Carriers (OCCs).
Page 342 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Multiline Terminals Required Component(s) None Related Features Pulse to Tone Conversion 1 - 332 Continued Dialing...
Page 343 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-03-03 Single Line Telephone Basic Enter 1 for this option to allow a 0 = Normal Data Setup – Terminal Type single line port to receive DTMF 1 = Special tones after the initial call setup.
Page 344 Issue 5.0 UNIVERGE SV8100 Continue dialing after the call connects. Toll Restriction and Class of Service programming may limit Continued Dialing. 1 - 334 Continued Dialing...
Page 345: Data Line Security
Data Line Security Description Data Line Security protects any station port from receiving audible tones (such as Camp-On or Override) and denies a station from barging in while busy to prevent disruption of data transmission when using a modem or facsimile machine. Conditions When a multiline terminal and a single line telephone are assigned for Data Line Security, Tone Override/Voice Override and Call Alert notification tone are not...
Page 346 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-09-05 Class of Service Options Turn off or on an extension ability 0 = Off (Incoming Call Service) – Signal/ to enable Handsfree Answerback 1 = On...
Page 347: Delayed Ringing
UNIVERGE SV8100 Issue 5.0 Delayed Ringing Description Delayed Ringing allows programmed secondary answering positions to ring on incoming calls after a programmed time. This feature applies to CO/PBX lines and Virtual Extensions. Conditions An extension user can answer an outside call just by lifting the handset (depending on programming).
Page 348 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-07-01 Trunk Access Map Setup Set up the Trunk Access Maps. 0 = No access This sets the access options for 1 = Outgoing access trunks.
Page 349 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-11-01 Virtual Extension Delayed Ring Use to assign the delayed ringing KY01 Mode 1: Assignment options for an extension Virtual 0 = (No) Immediate Extension or Virtual Extension Ring...
Page 350 Issue 5.0 UNIVERGE SV8100 - OR - Press the flashing key. Either Trunk key or VE key. To program a VE key on a phone: Press Speaker. Dial 852. Press the key you want to program. Dial *03. Dial the number of the extension you want to appear on the key.
Page 351 UNIVERGE SV8100 Issue 5.0 Dial the mode number in which the key will delay ring. 1 = Day 1 2 = Night 1 3 = Midnight 1 4 = Rest 1 5 = Day 2 6 = Night 2 7 = Midnight 2 8 = Rest 2 Press Speaker.
Page 352 Issue 5.0 UNIVERGE SV8100 1 - 342 Delayed Ringing...
Page 353: Department Calling
UNIVERGE SV8100 Issue 5.0 Department Calling Description With Department Calling, an extension user can call an idle extension in a preprogrammed Department Group (64 Department Groups available) by dialing the group pilot number. For example, this would let a caller dial the Sales department just by knowing the Sales department pilot number. The caller does not have to know any of the Sales department extension numbers.
Page 354 Issue 5.0 UNIVERGE SV8100 assigned in Program 24-05 and Program 13-04. Once these programs are assigned, the access code assigned in Program 11-11-27 can be used to change the destination as needed. DND: This feature can be enabled by using a (60) key programmed in Program 15-07 or by using service codes assigned in Program 11-11-30 (set) and Program 11-11-31 (cancel).
Page 355 UNIVERGE SV8100 Issue 5.0 If all members of the Department Group are busy, an incoming or transferred call to the group pilot number queues for an available member. Each group has a queue that can hold any number of waiting calls.
Page 356 Issue 5.0 UNIVERGE SV8100 Department Group. Program 16-01-05 (Extension Group All Ring Mode Operation) does not work to a Secondary Department Group. Default Setting Disabled Priority Routing CALL Telephone on a Telephone on a call call Priority 1 Priority 1...
Page 357 UNIVERGE SV8100 Issue 5.0 Circular Routing CALL 1 CALL 2 CALL 3 CALL 4 Figure 1-2 Department Calling Circular Routing System Availability Terminals All Terminals Department Calling 1 - 347...
Page 358 Issue 5.0 UNIVERGE SV8100 Required Component(s) VRS for Messaging Related Features Call Arrival (CAR) Keys Call Forwarding Department Step Calling Transfer InMail Voice Response System (VRS) Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-07-01 Department Group Pilot Numbers...
Page 359 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-11-29 Service Code Setup (for Setup/ Use this service code to cancel the MLT, SLT Entry Operation) – Delayed delayed transfer destination (default = 706) Transfer Cancellation for Each Department Group.
Page 360 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 16-01-05 Department Group Basic Data Set if all members of the group 0 = Manual Setup – Extension Group All should ring automatically (1) or 1 = Automatic Ring Mode Operation...
Page 361 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to extensions. Class of Service of Extensions (1~15) Default: Extension port 101 = Class 15...
Page 362 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 24-02-05 System Options for Transfer – For Single Line Telephones 0~64800 (seconds) Message Wait Ring Interval Time (SLTs) without message waiting (default = 30 seconds) lamps, this is the time between intermittent ringing.
Page 363 UNIVERGE SV8100 Issue 5.0 Operation To call a department group: Go off-hook. Dial department extension number. The system routes the call to the first free telephone in the department group. Optional: To manually ring all members of the group, dial the single digit service code assigned for All Member Ring (Program 11-16-10).
Page 364 Issue 5.0 UNIVERGE SV8100 1 - 354 Department Calling...
Page 365: Department Call Forward
UNIVERGE SV8100 Issue 5.0 Department Call Forward Description Department Group Call Forward allows a user to set call forward for calls routed to a department group. The forward can be set for each department group and each department group can have its own destination number that the calls are forwarded to.
Page 366 Issue 5.0 UNIVERGE SV8100 Default Setting The service code to enable department group forwarding is 702 ('Automatic Transfer Setup per Extension Group'). The service code to disable department group forwarding is 703 ('Automatic Transfer Cancellation per Extension Group'). The service code to set/change the destination number is 704 ('Automatic Transfer Destination per Extension Group').
Page 367 UNIVERGE SV8100 Issue 5.0 InMail Voice Response System (VRS) Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-07-01 Department Group Pilot Numbers Use to assign pilot numbers to Up to eight digits – Dial each Department Group set up.
Page 368 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 13-04-01 Speed Dialling Number Displays the call forward (default not assigned) destination for department group forward. For external destinations the number should be prefixed with the external access code...
Page 369 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 16-01-05 Department Group Basic Data Set if all members of the group 0 = Manual Setup – Extension Group All should ring automatically (1) or 1 = Automatic Ring Mode Operation...
Page 370 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to extensions. Class of Service of Extensions (1~15) Default: Extension port 101 = Class 15...
Page 371 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 24-02-05 System Options for Transfer – For Single Line Telephones 0~64800 (seconds) Message Wait Ring Interval Time (SLTs) without message waiting (default = 30 seconds) lamps, this is the time between intermittent ringing.
Page 372 Issue 5.0 UNIVERGE SV8100 Operation To set the destination number for each department group: (Cannot be set from an analogue SLT.) Press SPK to go off hook. Dial 704. Dial the department group number (01 to 64). Dial the night mode number (1 to 8).
Page 373 UNIVERGE SV8100 Issue 5.0 Press SPK to hang up. Repeat steps 1 to 4 for further department groups. - OR - Press the department group call forward function key (851+58+group number). The key will go out when the call forward is cancelled.
Page 374 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 364 Department Call Forward...
Page 375: Department Step Calling
UNIVERGE SV8100 Issue 5.0 Department Step Calling Description After calling a busy Department Calling Group member, an extension user can have Department Step Calling quickly call another member in the group. The caller does not have to hang up and place another Intercom call if the first extension called is unavailable.
Page 376 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-07 Service Code Setup (for Service If required, customize the Step MLT, SLT Access) – Step Call Call service code to be used by an (default = 808) extension user.
Page 377 UNIVERGE SV8100 Issue 5.0 Operation To make a Step Call: Place a call to a busy Department Group member. - OR - Place a call to a Department Group pilot number. Dial Department Step Code (2) to call the next available Department Group member.
Page 378 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 368 Department Step Calling...
Page 379: Dial Pad Confirmation Tone
UNIVERGE SV8100 Issue 5.0 Dial Pad Confirmation Tone Description For an extension with Dial Pad Confirmation Tone enabled, the user hears a beep each time they press a key. This is helpful for Intercom calls and Dial Pulse trunk calls, since these calls provide no Call Progress tones.
Page 380 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-19 Service Code Setup (for Setup/ If required, change the service Entry Operation) – Key Touch code to enable or disable the Key (default = 824) Tone On/Off Touch Tone.
Page 381: Dial Tone Detection
UNIVERGE SV8100 Issue 5.0 Dial Tone Detection Description If a trunk has Dial Tone Detection enabled, the system monitors for dial tone from the Telco or PBX when a user places a call on that trunk. If the user accesses the trunk directly (by pressing a line key or dialing 9 and the trunk number), the system drops the trunk if dial tone does not occur.
Page 382 Issue 5.0 UNIVERGE SV8100 Last Number Redial Save Number Dialed Speed Dial – System/Group/Station Trunk Group Routing Trunk Groups 1 - 372 Dial Tone Detection...
Page 383 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-09-01 DTMF and Dial Tone Circuit Setup If dial tone detection is enabled, be 0 = Common Use sure to allocate at least one circuit...
Page 384: Table 1-7 Dial Tone Detection Program Interaction
Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 21-01-06 System Options for Outgoing If Dial Tone Detection is disabled, 0~64800 (seconds) Calls – Dial Pause at First Digit the system waits based on this (default = 1 second) time before sending dialed digits.
Page 385: Dialing Number Preview
UNIVERGE SV8100 Issue 5.0 Dialing Number Preview Description Dialing Number Preview lets a display multiline terminal user dial and review a number before the system dials it. Dialing Number Preview helps the user avoid dialing errors. Conditions An extension user cannot edit the displayed number.
Page 386 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to extensions. Class of Service of Extensions (1~15) Default: Extension port 101 =...
Page 387 UNIVERGE SV8100 Issue 5.0 To dial out the displayed trunk number, press a Line/Trunk Group key. If the previewed number as a trunk access code (e.g., 9), you can press Speaker instead. - OR - To dial an Intercom number, press Speaker.
Page 388 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 378 Dialing Number Preview...
Page 389: Digital Trunk Clocking
The Phase Locked Oscillator (PLO) equipped with the UNIVERGE SV8100 CD-CP00 is the timing source for all digital trunk blades in the system. The PLO synchronizes the system and clocks signals from another office. When the UNIVERGE SV8100 is a clock receiver office, the PLO generates the clock signal according to the source clock signals received from the source office within the network.
Page 390 Issue 5.0 UNIVERGE SV8100 System Availability Terminals Required Component(s) CD-CP00 CD-2BRIA - OR - CD-PRTA, CD-CCTA Related Features ISDN Compatibility K-CCIS – T1 Digital Trunk Clocking Examples: If multiple PRIs exist, the first one that synchronized with the carrier is chosen. In this example, the PRI in 02 was the first to synchronize with the carrier;...
Page 391 UNIVERGE SV8100 Issue 5.0 If there are multiple PRIs and the one being used for the source goes down, the system begins to count forward in slot numbers looking for the next available PRI. In this example, the PRI in 02 went down, so the system now begins looking forward in slot numbers for the next PRI to use as the clock source.
Page 392 Issue 5.0 UNIVERGE SV8100 In this example, there are multiple T1 circuits and a BRI circuit. Since the T1 assigned as EXTERNAL has higher priority than a BRI, the T1 EXTERNAL is the PLO synchronization source. Figure 1-7 Digital Trunk Clocking Example 5 In this example, there is a PRI, multiple T1s, and a BRI.
Page 393 UNIVERGE SV8100 Issue 5.0 In this scenario, the PRI was the clocking source until it went down. There are no other PRIs, T1 (Externals), or BRIs in the system. The CD-CP00 now becomes the PLO synchronization source. Figure 1-10 Digital Trunk Clocking Example 8 Guide to Feature Programming Refer to the related features for programming.
Page 394 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 384 Digital Trunk Clocking...
Page 395: Direct Inward Dialing (Did)
For example, a translation table could convert digits 501~756 to extension numbers 301~556. The UNIVERGE SV8100 system has 2000 DID Translation Table entries that you can allocate among the 20 DID Translation Tables. One translation is made in each entry. For a simple installation, you can put all 2000 entries in the same table.
Page 396 Issue 5.0 UNIVERGE SV8100 DID Camp-On sets what happens to DID calls to busy extensions when you have Busy Intercept disabled. With DID Camp-On enabled, a call to a busy extension camps-on for the DID Ring No Answer Time. It then diverts to the programmed DID Intercept extension ring group or Voice Mail. Without DID Camp-On, the caller to the busy extension hears only busy tone.
Page 397 UNIVERGE SV8100 Issue 5.0 DID Intercept DID Intercept automatically reroutes DID calls under certain conditions. There are three DID Intercepts: Vacant Number Intercept If a caller dials an extension that does not exist or misdials, Vacant Number Intercept can reroute the call to the programmed DID Intercept extension ring group or Voice Mail.
Page 398 Issue 5.0 UNIVERGE SV8100 For busy or no answer intercept calls, a third destination can be defined in Program 22-12. If the first and third destinations are programmed but the second destination is not, the incoming call goes to the third destination after the first destination.
Page 399 UNIVERGE SV8100 Issue 5.0 DID Call by Time Schedule DID Call by Time Schedule allows for 100 programmed DID Conversion table entries (PRG 22-17-01) that can be routed based on Time Patterns. Each DID Conversion table has a maximum of eight programmable Time Patterns and each Time Pattern can reference one of the 2000 different Dial-In Conversion table entries in PRG 22-11-01.
Page 400: Table 1-8 Example 2 (Manual Change)
Issue 5.0 UNIVERGE SV8100 Table 1-8 Example 2 (Manual Change) PRG 22-17 Table No. Receive Dial Time Pattern Start Time End Time PRG 22-11 1~100 1111 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00 00:00...
Page 401 UNIVERGE SV8100 Issue 5.0 Conditions DID service must be purchased from your local telephone company. DID Intercept for each DID number works for DID trunks with a trunk service type 3 in Program 22-02. Other types of trunks may use the DID table, but the DID intercept feature for each DID number is not yet supported.
Page 402 Issue 5.0 UNIVERGE SV8100 Related Features Central Office Calls, Answering Direct Inward Line (DIL) Direct Inward System Access (DISA) Off-Hook Signaling Paging, External Programmable Function Keys Station Message Detail Recording Transfer 1 - 392 Direct Inward Dialing (DID)
Page 403 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup Use program 10-03-XX to setup The assigned data and confirm the basic varies depending on configuration data for each blade. the blade installed in This program represents different the slot.
Page 404 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns Off (0) or On (1) the 0 = Off (Incoming Call Service) – extension ability to receive a 1 = On Second Call for DID/DISA/DIL/...
Page 405 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-04-01 Incoming Extension Ring Group Assign extensions to Ring Groups. Maximum eight digits Assignment Calls ring the extensions Default: according to programming in Extensions 101~108 Program 22-06. (first eight ports) ring for incoming Ring Group 1 calls.
Page 406 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 22-11-04 DID Translation Number For each DID Translation Table 0 = No Transfer Conversion – Transfer Operation entry (1~2000), specify the 1 = Busy Mode condition required to transfer the...
Page 407 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-11-11 DID Translation Number Enable (1) or disable (0) each 0 = Disable (Caller Conversion – Ring Group conversion table to follow the Ring hears Ringback) Transfer Group programming defined in...
Page 408 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-02-01 VRS/DISA VRS Message For each trunk port and each night 0 = No Message mode, select the message source 1 = 01~100 (VRS (0 = No Message, 1 = VRS, 2 =...
Page 409 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 25-06-02 VRS/DISA One-Digit Code Set up single digit dialing for Up to eight digits Attendant Setup – Destination Automated Attendant callers. For (default not assigned) Number each VRS Message programmed...
Page 410 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-07-13 System Timers for VRS/DISA – If a DISA caller dials a busy 0~64800 (seconds) VRS/DISA Busy Tone Interval extension (and Program 25-04-01 (default = 5 seconds) = 0), the system plays busy tone for this time before disconnecting.
Page 411 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-11-02 DID Translation Number For each DID Translation Table Maximum 24 digits Conversion – Target Number entry (1~2000), specify the (default not assigned) extension the system dials after translation.
Page 412: Table 1-9 Led Flash Patterns
Issue 5.0 UNIVERGE SV8100 Dial the Time Pattern 1~8. Table 1-9 LED Flash Patterns Time Pattern LED Appearance Pattern 1 Pattern 2 Pattern 3 Slow Flash Pattern 4 Fast Flash Patterns 5~8 1 - 402 Direct Inward Dialing (DID)
Page 413: Direct Inward Line (Dil)
UNIVERGE SV8100 Issue 5.0 Direct Inward Line (DIL) Description A Direct Inward Line (DIL) is a trunk that rings an extension, virtual extension or Department Group directly. Since DILs only ring one extension or group (i.e., the DIL destination), employees always know which calls are for them.
Page 414 Issue 5.0 UNIVERGE SV8100 Program a name for a DIL in Program 14-01-01. This makes it easier to identify the incoming call. If a Multiline Terminal is busy, a second incoming DIL call provides Call Alert Notification, depending on chassis programming. The second DIL call waits in line for the user to answer the call.
Page 415 UNIVERGE SV8100 Issue 5.0 Group Call Pickup Name Storing Off-Hook Signaling Paging, External Programmable Function Keys Ring Groups Transfer Direct Inward Line (DIL) 1 - 405...
Page 416 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys To have the DIL ring a key, Line Key 1~48 program a line key for the DIL 0~99 (Normal Function trunk.
Page 417 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup Assign each DIL Service Type 4. Trunks 1~200 Make an entry for each Night 0 = Normal Service mode. 1 = VRS (second dial tone if no...
Page 418 Issue 5.0 UNIVERGE SV8100 Pressing the flashing Answer Key puts the first call on hold and answers the second incoming call. This can be repeated until all incoming calls are answered. If you have Ringing Line Preference, lift the handset to answer the call.
Page 419: Direct Inward System Access (Disa)
UNIVERGE SV8100 Issue 5.0 Direct Inward System Access (DISA) Description DISA permits outside callers to directly dial system extensions, trunks and selected features. This could help an employee away from the office that wants to directly dial co-workers or use the company trunks for long distance calls.
Page 420 Issue 5.0 UNIVERGE SV8100 (Trunk Groups 1~100). This allows the DISA caller to place an outgoing call over the selected group. Trunk Group Access bypasses the system Trunk Group Routing/ARS/Trunk Access Maps. As with dial 9 access, any toll charges are incurred by the system.
Page 421 UNIVERGE SV8100 Issue 5.0 DISA Operating Modes The DISA Operating Modes determine what happens when a DISA caller forgets to dial, calls a busy or unanswered extension or dials incorrectly. The system can either drop the call or send it to a preset Ring Group (called the DISA Transfer Destination).
Page 422 Issue 5.0 UNIVERGE SV8100 2. After 10 minutes (Tandem Trunking = Program 24-02-07 or DISA = Program 25-07-07), a warning tone is heard and the user dials (Program 20-28-01) to extend the conversation. 3. After three minutes (Program 20-28-03), the warning tone is heard again. After 30 seconds (Tandem Trunking = Program 24-02-10 or DISA = Program 25-07-08), the call is disconnected.
Page 423 UNIVERGE SV8100 Issue 5.0 System Availability Terminals Remote Analog DTMF telephones Required Component(s) PZ-VM21 InMail (for Announcements) Related Features Automatic Route Selection Central Office Calls, Answering Direct Inward Dialing (DID) Direct Inward Line (DIL) Long Conversation Cutoff Tandem Trunking (Unsupervised Conference)
Page 424 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-09-01 DTMF and Dial Tone Circuit Reserve at least one circuit for 0 = Common Use Setup DTMF reception (entry 0 or 2). 1 = Extension Only...
Page 425 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to an extension. Class of Service of Extensions (1~15) Default: Extension port 101 =...
Page 426 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-14-05 Class of Service Options for This option enables or disables a 0 = Off DISA/E&M – Operator Calling DISA or tie trunk caller ability to 1 = On...
Page 427 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup For DISA operation, set the trunk Trunks 1~200 service type to 2. You can have a 0 = Normal different service type for each 1 = VRS (second Night Service mode.
Page 428 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-03-01 VRS/DISA Transfer Ring Group Set the operating mode of each Ring Groups: With Incorrect Dialing DISA trunk. This sets what 1~100 happens to the call when the DISA Trunk Ports: caller dials incorrectly.
Page 429 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 25-06-01 VRS/DISA One-Digit Code Set up single digit dialing through 0~100 (0 = No Setting) Attendant Setup – Next the VRS. This gives VRS callers 101 = Voice MAil...
Page 430 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-07-02 System Timers for VRS/DISA – A DISA caller can ring an 0~64800 (seconds) VRS/DISA No Answer Time extension for this time before the (default = 0 seconds) system sets the call as a Ring No Answer.
Page 431 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 25-07-11 System Timers for VRS/DISA – Set the time the system waits after 0~64800 (seconds) VRS/DISA Answer Delay Time receiving an incoming VRS/DISA (default = 0 seconds) call before the system automatically answers the call (0~64800 seconds).
Page 432 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-12-01 Alternate Trunk Group Routing Assign the trunk route that DISA Day/Night Mode = 1~8 for DISA Callers access if they dial the Route Table Number = Alternate Trunk Route Access 0~100 Code.
Page 433 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-28-03 Trunk to Trunk Conversation – When Program 14-01-25 is 0~64800 (seconds) Conversation Continue Time enabled, determine the time a call (default = 0 seconds) is extended when the user dials the Continue code (defined in Program 20-28-01).
Page 434 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-07-08 System Timers for VRS/DISA – This timer determines how long 0~64800 (seconds) Long Conversation Disconnect the system waits before (default = 10 seconds) Time disconnecting a DISA call after the Long Conversation tone is heard.
Page 435 UNIVERGE SV8100 Issue 5.0 Dial an extension. - OR - Dial 9 for Trunk Group Routing or ARS. - OR - Dial Alternate Trunk Route Access Code (if enabled). - OR - Dial 804 + a trunk group number (1~100) for an outside call.
Page 436 Issue 5.0 UNIVERGE SV8100 To use the Continue code to extend a DISA call: An external call connects to an external number (either by transferring with Tandem Trunking or by DISA caller). After the programmed time (Program 25-07-07), a warning tone is heard and the user dials the Continue code (Program 20-28-01) to extend the conversation.
Page 437: Direct Station Selection (Dss) Console
Hotline keys on multiline terminals and DSS Consoles. ACD/Non-ACD Agent DSS Lamping Available With the UNIVERGE SV8100 system, Programs 30-05-02~30-05-21 allow a non-ACD DSS console to light indicating the status of both non-ACD agents and ACD agents , but ACD agents do not show ACD status (Logged In/Out, etc.), only idle, busy, etc.
Page 438 Issue 5.0 UNIVERGE SV8100 Conditions Changing flash patterns for DSS Consoles also changes them for Hotline keys. When installing a DSS, the system must auto-detect the console for the LEDs to function correctly. When connecting the DSS to an extension previously defined with another circuit type, undefine the circuit type (enter 00 in Program 10-03-01 for the extension number), then connect the DSS Console.
Page 439 UNIVERGE SV8100 Issue 5.0 When a multiline terminal user is on a call, they can transfer to another station by pressing a DSS key for that station. It is not necessary to press Transfer to transfer to another station using a DSS key.
Page 440 Issue 5.0 UNIVERGE SV8100 Required Component(s) None 1 - 430 Direct Station Selection (DSS) Console...
Page 441 UNIVERGE SV8100 Issue 5.0 Related Features Automatic Call Distribution (ACD) Call Forwarding Central Office Calls, Answering Central Office Calls, Placing Door Box Night Service One-Touch Calling Paging, External Paging, Internal Programmable Function Keys Speed Dial – System/Group/Station Direct Station Selection (DSS) Console...
Page 442 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (DLCA PKG Setup) – Use to setup and confirm the 0 = Not set Terminal Type (B1) Basic Configuration data for 1 = Multiline Terminal terminal type (B1).
Page 443 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 30-02-01 DSS Console Extension The extension number for the Up to eight digits. Assignment – Extension Number multiline terminal connected with (default not assigned) the DSS console (up to eight digits).
Page 444 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 30-05-10 DSS Console Lamp Table – Hotel Use to define the LED patterns for Status Code 2 (Hotel DSS) hotel status code 2 on the DSS [default = 1 (FL)] consoles.
Page 445 UNIVERGE SV8100 Issue 5.0 Operation Calling an extension from your DSS Console: Press the DSS Console key. If the call voice-announces, you can make it ring by dialing 1. If you do not have Handsfree, you must lift the handset to speak.
Page 446 Issue 5.0 UNIVERGE SV8100 Making an Internal Page using your DSS Console: Press the DSS Console Internal Page zone key (Group key 1~64). If the zone you want is busy, try again later. If you do not have Handsfree, lift the handset to make your announcement.
Page 447 UNIVERGE SV8100 Issue 5.0 Using a DSS Console key as a One-Touch or Programmable Function Key: A user can have DSS Console keys programmed as One-Touch Keys. These keys can be used for Direct Station Selection, Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access. The stored service code cannot be longer than three digits.
Page 448 Issue 5.0 UNIVERGE SV8100 1 - 438 Direct Station Selection (DSS) Console...
Page 449: Directed Call Pickup
UNIVERGE SV8100 Issue 5.0 Directed Call Pickup Description Directed Call Pickup permits an extension user to intercept a call ringing another extension. This allows a user to conveniently answer a call for a co-worker from their own telephone. With Directed Call Pickup, an extension user can pick up: Trunk calls (i.e., Ring Group calls)
Page 450 Issue 5.0 UNIVERGE SV8100 Related Features Call Arrival (CAR) Keys Department Calling Group Call Pickup Hold Hotline Park Secretary Call Pickup Secondary Incoming Extension Transfer Virtual Extensions InMail 1 - 440 Directed Call Pickup...
Page 451 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-25 Service Code Setup (for Service Use to customize the Service MLT, SLT Access) – Direct Call Pickup - Codes for direct call pickup – own...
Page 452 Issue 5.0 UNIVERGE SV8100 If more than one call is coming in, the system sets the priority for which call it answers first. 1 - 442 Directed Call Pickup...
Page 453: Directory Dialing
UNIVERGE SV8100 Issue 5.0 Directory Dialing Description Directory Dialing allows a Multiline Terminal user to select a co-worker or outside caller from a list of names, rather than dialing the telephone number. There are four types of Directory Dialing: SPD–Speed Dials EXT–co-worker’s Extensions...
Page 454 Issue 5.0 UNIVERGE SV8100 Related Features Last Number Redial Name Storing Speed Dial – System/Group/Station Softkeys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-13-51 Class of Service Options Determine if an extension name 0 = Off and number will be listed (On) or (Supplementary Service) –...
Page 455 UNIVERGE SV8100 Issue 5.0 Operation To use Directory Dialing from a multiline terminal with an LCD: Press the Dir softkey. Press the softkey for the Directory Dialing type: SPD–Speed Dials EXT–co-worker’s Extensions STA–Personal Speed Dials TELBK–Telephone Book Directory Dialing follows any feature restrictions that your system may have enabled. For example, if your extension cannot normally use Speed Dial –...
Page 456 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 446 Directory Dialing...
Page 457: Distinctive Ringing, Tones And Flash Patterns
You can also customize the tones the system uses for splash tone, confirmation tone, trunk ring tone, Intercom ring tone and Alarm ring tone. Refer to the chart below and the UNIVERGE SV8100 Programming Manual for more details Table 1-10 Distinctive Ringing: Tones and Flash Patterns...
Page 458 Issue 5.0 UNIVERGE SV8100 Await Answer Transfer When a ring group call rings a Single Line Station, the BLF indication shows busy. The priority of the Large LED is as follows: 1. CO Call Ringing 2. Message Waiting Received 3. VM Message Waiting 4.
Page 459 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-02-02 Multiline Telephone Basic Data From the range specified in 1 = High Setup – Trunk Ring Tone Program 22-03-01, select the 2 = Medium...
Page 460 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-08 Incoming Virtual Extension Ring Use to assign a ring tone range ICM Tone Pattern, Tone Setup (0~4) to incoming virtual 0 = Pattern 1 extensions assigned to a Virtual 1 = Pattern 2 Extension key (Program 15-07).
Page 461 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number VRS Waiting 20-15-11 Ring Cycle Setup – Used to define the ringing cycle for Ringing Cycle = 1~13 Message Incoming Incoming VRS Waiting Message. (default = 6) Call 22-03-01...
Page 462 Issue 5.0 UNIVERGE SV8100 Dial 2 to change ringing for trunk calls. Select the pitch (1~8). Press Speaker to hang up. 1 - 452 Distinctive Ringing, Tones and Flash Patterns...
Page 463: Do Not Disturb
UNIVERGE SV8100 Issue 5.0 Do Not Disturb Description Do Not Disturb blocks incoming calls and Paging announcements. DND permits an extension user to work by the telephone undisturbed by incoming calls and announcements. The user can activate DND while their telephone is idle or while on a call. Once activated, incoming trunk calls still flash the line keys.
Page 464 Issue 5.0 UNIVERGE SV8100 forwarded extension hear DND tone. If an extension activates DND option 4, other extensions can still forward calls to it, but the callers hear DND tone. An extension user can override Call Forwarding or Do Not Disturb at another extension using any of the following methods: 1.
Page 465 UNIVERGE SV8100 Issue 5.0 Call Forwarding/Do Not Disturb Override Central Office Calls, Answering Direct Inward Line (DIL) Distinctive Ringing, Tones and Flash Patterns Selectable Display Messaging Do Not Disturb 1 - 455...
Page 466 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-08 Service Code Setup (for Setup/ Assign Service Code for DND. MLT, SLT Entry Operation) – Do Not (default = 847) Disturb 11-12-01 Service Code Setup (for Service Assign Service Code for DND.
Page 467 UNIVERGE SV8100 Issue 5.0 Press Program softkey. Press DND softkey. Press Set softkey. Choose the following softkey Ext ICM ALL Cfwto Ext=Incoming Trunk Calls Blocked ICM=Incoming Intercom, Paging, call forwards and Transferred Trunk Calls Blocked. ALL=All Calls Blocked Cftwto=Call Forwards Blocked...
Page 468 Issue 5.0 UNIVERGE SV8100 4 = Call Forwards Blocked 1 - 458 Do Not Disturb...
Page 469: Door Box
Conditions The Door Box Feature Requires a PGD(2)-U10 ADP. A maximum of 56 PGD(2)-U10 ADP units can be installed in an UNIVERGE SV8100 system. Refer to the UNIVERGE SV8100 System Hardware Manual for more information. If a PGD(2)-U10 ADP circuit has a Door Box (doorphone) connected, you cannot use that circuit for External Paging.
Page 470 UNIVERGE SV8100 Each channel in the PGD(2)-U10 ADP has a jumper which must be set for Door Box operation. Refer to the UNIVERGE SV8100 System Hardware Manual for additional details. A Single Line Telephone (SLT), connected to an APR does not ring when the Door Phone rings the multiline telephone.
Page 471 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (DLCA PKG Setup) – Use to setup and confirm the 0 = Not set Terminal Type (B1) Basic Configuration data for 1 = Multiline Terminal terminal type (B1).
Page 472 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 32-01-02 Door Box Timers – Door Lock Set the time the Door Box strike 0~64800 (seconds) Cancel Time stays open when the single line (default = 10 seconds) telephone user hookflashes or a multiline terminal user presses the Recall key.
Page 473 UNIVERGE SV8100 Issue 5.0 Operation To call a Door Box: Multiline Terminal Press Speaker Dial 802. Dial Door Box Number (1~8). Single Line Telephone Lift the handset. Dial 802. Dial Door Box Number (1~8). To activate the Door Box strike: Multiline Terminal While talking to the Door Box, press the Recall key.
Page 474 Issue 5.0 UNIVERGE SV8100 Single Line Telephone If you are busy on a call, an off-hook signal is heard indicating the incoming Door Box call. Press the Flash key or hookflash to place your active call on hold. Dial the door box access code (802 by default) plus the door box number (1~8) to answer the Door Box call.
Page 475 UNIVERGE SV8100 Issue 5.0 To cancel Call Forwarding Off-Premise for a Door Box: At the multiline terminal, press Speaker + dial SC 822. - OR - At the multiline terminal only, press External Forward by Doorphone key (Program 15-07-01 or SC 851, code 54).
Page 476 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 466 Door Box...
Page 477: Drop Key
UNIVERGE SV8100 Issue 5.0 Drop Key Description The Drop Key abandons a call while retaining the PBX/Centrex line to originate another call. The Drop Key is provided by programming a Programmable Function Key. This feature allows Recall to be used to provide a hookflash to the PBX or Central Office.
Page 478 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-42 Service Code Setup (for Service Use to customize the flash on Access) – Flash on Trunk lines trunk lines Service Codes. (default = 806)
Page 479 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 81-10-07 COI Initial Data Setup – Set the Flash duration (20 mS~5.0 0 = 20 ms Hookflash Time Selection 1 sec) for analog trunk [COI( )-U( ) 1 = 40 ms ETU] circuits.
Page 480 Issue 5.0 UNIVERGE SV8100 To use the Feature Key plus Recall key from a Multiline Terminal with a CO/PBX call in progress: Press Feature. Press Recall. Receive the new CO/PBX dial tone. Dial the desired number. To use the Drop key feature from a single line telephone with a CO/PBX call in progress: Hookflash.
Page 481: Dt700 Large Led Indication
UNIVERGE SV8100 Issue 5.0 DT700 Large LED Indication Description From V3.0 software or higher the DT700 large LED indication allows for different colours to be displayed on the large LED for different incoming call scenarios presented to the DT700 handset.
Page 482 Issue 5.0 UNIVERGE SV8100 Related Features Central Office Calls, Answering Intercom Virtual Extensions 1 - 472 DT700 Large LED Indication...
Page 483 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-35 Trunk Basic Setup – DT700 LED Use to customize the colour of the 1 = Do Not Use (Trunk) illumination Setup large LED for incoming signalling 2 = Red trunk calls on DT700 terminals.
Page 484 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 474 DT700 Large LED Indication...
Page 485: Embedded Vrs
Embedded VRS Description The PZ-VM21 daughter board provides the option for the Voice Response System (VRS) which gives the system voice recording and playback ability. The VRS CompactFlash card provides up to 100 system messages (General Message, Automated Attendant greetings, ACD messages, 900 Preamble and Music on Hold).
Page 486 Issue 5.0 UNIVERGE SV8100 Service. This allows you to give recording ability to the System Administrator or Communications Manager, for example, but not any other employee. The Message Waiting LED at each telephone flashes when a new General Message is recorded. After the extension user listens to the message, the Message Waiting LED goes out.
Page 487 UNIVERGE SV8100 Issue 5.0 The maximum number of Embedded VRS ports is 1 If a VM21 card is installed, the embedded VRS is not available Conditions Before Embedded VRS is functional it is necessary to install the required prompts. These are available either via the Technical DVD or the Software Database on BusinessNet.
Page 488 Issue 5.0 UNIVERGE SV8100 Related Features Transfer Operator Music on Hold Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-20 Service Code Setup (for System Define the service code to use to MLT, SLT Administrator) – VRS - Record/ record or erase a VRS message.
Page 489 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-17-01 Operator Extension – Operator’s Designate an extension an Up to eight digits Extension Number operator. When a message is left (default not assigned) in the embedded VRS mailbox,...
Page 490 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-03-01 VRS/DISA Transfer Ring Group Set the destination that Automated Ring Groups: With Incorrect Dialing Attendant (OPA) calls ring if the 1~100 OPA caller dials an incorrect Trunk Ports: extension number.
Page 491 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 25-06-01 VRS/DISA One-Digit Code Set up single digit dialing for 0~100 (0 = No Setting) Attendant Setup – Next Automated Attendant callers. For 101 = Voice MAil Attendant Message Number...
Page 492 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-15-02 DISA Transfer Target Setup – Used to assign a speed dial Speed Dial bin number DISA Transfer Target Area at No number when a dial tone times-out 0 ~ 1999.
Page 493 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 40-10-04 Voice Announcement Service If an extension has Personal 0~64800 seconds Option – VRS No Answer Time Greeting enabled and all VRS (default = 0) ports are busy, a DIL or DISA call to the extension waits this time for a VRS port to become free.
Page 494 Issue 5.0 UNIVERGE SV8100 Operation VRS Messages To record a VRS message: Press Speaker or lift the handset. - OR - At a single line telephone, lift the handset. Dial 716. Dial 7 ( ecord). Dial the VRS message number you want to record (001~100).
Page 495 UNIVERGE SV8100 Issue 5.0 At a single line telephone, lift the handset. Dial 716. Dial 5 ( isten). Dial the Embedd VRS mailbox message number to which you want to listen (091~100). You hear the previously recorded message. If you hear a beep instead, no previous message is recorded.
Page 496 Issue 5.0 UNIVERGE SV8100 To erase a previously recorded VRS message: Press Speaker or lift the handset. - OR - At a single line telephone, lift the handset. Dial 716. Dial 3 ( rase). Dial the number of the VRS message you want to erase (001~100).
Page 497 UNIVERGE SV8100 Issue 5.0 General Message To listen to the General Message: Multiline Terminal Only Your Message Waiting LED flashes when there is a new General Message. A voice message periodically reminds you. Do not lift the handset or press Speaker.
Page 498 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 488 Embedded VRS...
Page 499: Facsimile Co Branch Connection
Facsimile CO Branch Connection Description The UNIVERGE SV8100 system provides branch connection of locally provided facsimile machines to CO/PBX lines. Additional dedicated CO/PBX lines are not required for a facsimile to operate. The facsimile shares any CO/PBX line on the COI Package and Power Failure (PF) circuit.
Page 500 Issue 5.0 UNIVERGE SV8100 System Availability Terminals None Required Component(s) CD-4COTB Related Features None 1 - 490 Facsimile CO Branch Connection...
Page 501 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-02-14 Analog Trunk Data Setup – Loop Select loop start (0) or ground start 0 = Loop Start (Loop) Start/Ground Start (1) for the trunk.
Page 502 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 22-08-01 DIL/IRG No Answer Destination A DIL that rings its programmed 0 (No Setting) destination longer than this 001~100 interval diverts to the DIL No (Incoming Ring Group) Answer Ring Group (set in 102 (In-Skin/ Program 22-08).
Page 503: Flash
UNIVERGE SV8100 Issue 5.0 Flash Description Flash allows an extension user to access certain CO and PBX features by interrupting the trunk loop current. Flash lets an extension user take full advantage of whatever features the connected Telco or PBX offers. You must set the Flash parameters for compatibility with the connected Telco or PBX.
Page 504 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-42 Service Code Setup (for Service Use to customize the Service Access) – Flash on Trunk Lines Codes for flash on trunk lines. (default = 806) 14-02-03 Analog Trunk Data Setup –...
Page 505 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 81-10-08 COT Initial Data Setup – Set the open loop disconnect 0 = 20 ms Hookflash Time Selection 2 duration (16~4080 ms) for analog 1 = 40 ms trunk CD-4COTB circuits Program 2 = 60 ms 81-10-08.
Page 506 Issue 5.0 UNIVERGE SV8100 Operation To flash the trunk you are on: From a Multiline Terminal Press Recall. From a Single Line Telephone Hookflash. Dial 806. 1 - 496 Flash...
Page 507: Flexible Length Ddi
UNIVERGE SV8100 Issue 5.0 Flexible Length DDI Description Flexible Length DDI is an extension to normal DDI overlap reception. Previously, the system expected exactly the number of DDI digits that are configured in PRG22-09. With the addition of Flexible Length DDI whilst insufficient digits are recieved for a match, ISDN timer T302 is restarted with every received digit.
Page 508 Issue 5.0 UNIVERGE SV8100 the normal DDI’s range is from 100 to 280, the voice mail boxes are reachable with 3100~3280, FAXes are received using 1009~2809. Both DDIs shall be routed to the same UMS system connect via S-Bus; with numbers 4xxx and 5xxx. The resulting DDI setting is: 3@@@ ->...
Page 509 UNIVERGE SV8100 Issue 5.0 Required Component(s) v2.00 system software of later. Related Features Direct Inward Dialing (DID) Department Calling Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 22-09-01 Expected number of digits (default = 4 digits) Enter the number of digits the table expects to receive from the telco.
Page 510 Issue 5.0 UNIVERGE SV8100 1 - 500 Flexible Length DDI...
Page 511: Flexible System Numbering
Although the default code of 9 is suitable for most applications, you can alter the code if needed. The system provides a completely flexible system numbering plan. Refer to the chart below and the UNIVERGE SV8100 Programming Manual for more details. Flexible System Numbering...
Page 512 Issue 5.0 UNIVERGE SV8100 Flexible System Numbering (Continued) Program Description Customize the Service Codes. 11-10 Service Code Setup (for System Administrator) 11-11 Service Code Setup (for Setup/Entry Operation) 11-12 Service Code Setup (for Service Access) 11-13 Service Code Setup (for ACD)
Page 513 UNIVERGE SV8100 Issue 5.0 Example for 310X Example for 3100X 10s Group 100s Group (4-digit) (5-digit) 11-01-01 = Dial 3 11-01-01 = Dial 3 31 Digit 4 = (9)Dial Extension Analyze Table 31 Digit 7 = (9)Dial Extension Analyze Table...
Page 514 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Stations Required Component(s) None Related Features None 1 - 504 Flexible System Numbering...
Page 515 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-01-01 System Numbering – Service Customize the system internal Refer to Univerge Code (Intercom) numbering plan. SV8100 System Program Manual 11-02-01 Extension Numbering Assign extension numbers to Up to eight digits extension ports.
Page 516 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-10-05 Service Code Setup (for System Use for storing group speed Administrator) – Storing Group dialing numbers for the System (default = 854) Speed Dialing Numbers Administrator. 11-10-06 Service Code Setup (for System Set the service code for setting Administrator) –...
Page 517 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-10-24 Service Code Setup (for System Use to customize the SMDR group Administrator) – SMDR - Group accumulated printouts for the (default = 722) Accumulated Printout Code System Administrator.
Page 518 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-11-03 Service Code Setup (for Setup/ Set the service code for setting call MLT, SLT Entry Operation) – Call Forward forwarding for no answer. (default = 845) – No Answer...
Page 519 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-11-17 Service Code Setup (for Setup/ Use this option to set the service Entry Operation) – code (default 751) to assign 2-digit (default = 851) Programmable Function Key function codes to the Function Programming (2-Digit Service keys.
Page 520 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-11-29 Service Code Setup (for Setup/ Use to customize the delayed MLT, SLT Entry Operation) – Delayed transfer cancellation for each (default = 706) Transfer Cancellation for Each extension group used for Extension Group registration and setup.
Page 521 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-11-44 Service Code Setup (for Setup/ Use to customize the auto MLT, SLT Entry Operation) – Auto attendant used for registration and (default = 790) Attendant setup. 11-11-45 Service Code Setup (for Setup/...
Page 522 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-11-58 Service Code Setup (for Setup/ Set the service code for setting MLT, SLT Entry Operation) – Call Forward call forwarding with Personal (default = 795) with Personal Greeting Greeting.
Page 523 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-12-15 Service Code Setup (for Service Use to customize the Service MLT, SLT Access) – Specified Trunk Codes which are used for (default = 805) Access specified trunk access.
Page 524 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-12-28 Service Code Setup (for Service Use to customize the Service MLT, SLT Access) – Call Pickup for Codes for call pickup for another (default = 869) Another Group group which are used for service access.
Page 525 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-12-42 Service Code Setup (for Service Use to customize the Service Access) – Flash on Trunk lines Codes which are used for flash on (default = 806) trunk lines.
Page 526 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-12-57 Service Code Setup (for Service With two trunks in Conference MLT, SLT Access) – Tandem Trunking press the Hold key and dial and (default = 753) the Conference/Tandem happens.
Page 527 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-14-02 Service Code Setup (for Hotel) – Use to customize the cancel DND MLT, SLT Cancel DND for Own Extension for own extension used with the (default = 728) Hotel/Motel feature.
Page 528 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-14-15 Service Code Setup (for Hotel) – Use to customize the room status MLT, SLT Room Status Change for Other change for other extension (default = 741) Extension Service Codes which are used with the Hotel/Motel feature.
Page 529 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-15-09 Service Code Setup, When a call is transferred using (default not assigned) Administrative (for Special this service code, it is transferred Access) – Transfer to Incoming to the ring group destination for Ring Group that incoming trunk.
Page 530 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-16-06 Single Digit Service Code Setup Customize the 1-digit Service (default not assigned) – DND/Call Forward Override Code used for DND/Call Forward Bypass Override. 11-16-07 Single Digit Service Code Setup...
Page 531: Flexible Timeouts
UNIVERGE SV8100 Issue 5.0 Flexible Timeouts Description The Flexible Timeouts feature provides a variety of timers in the Resident System Program to allow the system to operate without initial programming. The system timers can be changed to meet customer needs according to the system application requirements.
Page 532 Issue 5.0 UNIVERGE SV8100 Timer Timer Title Comment Class 0 Class 1~15 22-01-04 20-31-08 DIL No Answer Recall Time A DIL that rings its programmed destination longer than this time diverts to the DIL No Answer Ring Group (Program 22-08-01). Trunk Timer Class is referred by the trunk.
Page 533 UNIVERGE SV8100 Issue 5.0 Timer Timer Title Comment Class 0 Class 1~15 25-07-08 20-31-20 Long Conversation This timer determines how long the system waits Disconnect Time before disconnecting a trunk-to-trunk conversation call after the Long Conversation tone is heard. Trunk Timer Class is referred.
Page 534 Issue 5.0 UNIVERGE SV8100 Required Component(s) None Related Features None 1 - 524 Flexible Timeouts...
Page 535 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-01-08 System Options – Trunk Set the Trunk Queuing callback 0~64800 (seconds) Queuing Callback Time time. A Trunk Queuing Callback (default = 15 seconds) rings an extension for this interval.
Page 536 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-31-07 Timer Class Timer Assignment – If a trunk rings a multiline 0~64800 (seconds) Ring No Answer Alarm Time telephone longer than this interval, (default = 60 seconds) the system changes the ring cadence.
Page 537 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-31-16 Timer Class Timer Assignment – An unanswered transferred call 0~64800 (seconds) Transfer Recall Time recalls after this time to the (default = 30 seconds) extension that initially transferred 20-31-17 Timer Class Timer Assignment –...
Page 538 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 21-01-03 System Options for Outgoing Program how long an extension 0~64800 seconds Calls – Trunk Interdigit Time must wait before using the (default = 5 seconds) (External) Barge-In feature can be used on a call (this timer waits until it expires before putting a call in a talk state).
Page 539 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 24-01-06 System Options for Hold – Park Set the Park Hold Time (0~64800 0~64800 (seconds) Hold Time - Normal seconds). A call that is parked (default = 90 seconds)
Page 540 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 25-07-10 System Timers for VRS/DISA – This is the maximum length of an 0~64800 (seconds) DISA External Paging Time External Page placed by a DISA (default = 30 seconds) caller.
Page 541: Flexible Transfer/Virtual Loopback
UNIVERGE SV8100 Issue 5.0 Flexible Transfer/Virtual Loopback Description The Virtual Loopback feature gives users the ability to dial, or route, calls to the DDI routing tables by creating DDI calls internally. This can give additional flexibility in routing when transferring manually or 'automatically' using, for example, single digit options from DSPDB and voice mail Auto Attendants.
Page 542 Issue 5.0 UNIVERGE SV8100 Default Setting None assigned System Availability Terminals All Terminals Required Component(s) Available, unassigned extension and trunk ports. Related Features Direct Inward Dialing (DID) Direct Inward Dial (DIL) Direct Inward System Access (DISA) Department Calling 1 - 532...
Page 543 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-42-01 Loopback Port Count Assign the number of virtual (default not assigned) loopback ports required. 10-42-02 Logical Trunk Port Displays the starting port for the (default not assigned) virtual loopback trunks.
Page 544 Issue 5.0 UNIVERGE SV8100 Easy Edit reference Blade Configuration, Virtual Loopbacks, Virtual Loopback -Extension Port. Give the department group a pilot number (e.g. 5 - re-configuration of system numbering will be required for this.) Easy Edit references Blade Configuration, Virtual Loopbacks, Virtual Loopback Department group Blade Configuration, Virtual Loopbacks, Numbering Plan.
Page 545: Forced Trunk Disconnect
UNIVERGE SV8100 Issue 5.0 Forced Trunk Disconnect Description Forced Trunk Disconnect allows an extension user to disconnect (release) another extension active outside call. The user can then place a call on the released trunk. Forced Trunk Disconnect lets a user access a busy trunk in an emergency, when no other trunks are available.
Page 546 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-26 Service Code Setup (for System Assign the Service Code. MLT, SLT Administrator) – Forced Trunk (default = 724) Disconnect 20-06-01 Class of Service for Extensions...
Page 547 UNIVERGE SV8100 Issue 5.0 - OR - Dial the trunk access code (805 + trunk number) for the trunk disconnected in Step 2. Single Line Telephone Dial trunk access code (805 + trunk number). You hear busy tone. Trunk numbers are 001~200.
Page 548 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 538 Forced Trunk Disconnect...
Page 549: Group Call Pickup
Group Call Pickup Description Group Call Pickup allows an extension user to answer a call ringing another extension in a Pickup Group. This permits co-workers in the same work area to easily answer each other’s calls. The user can intercept the ringing call by dialing a code or pressing a programmed Group Call Pickup key.
Page 550 Issue 5.0 UNIVERGE SV8100 System Availability Terminals Any Station Required Component(s) None Related Features Central Office Calls, Answering Directed Call Pickup Programmable Function Keys 1 - 540 Group Call Pickup...
Page 551 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-25 Service Code Setup (for Service Use to customize the Service MLT, SLT Access) – Direct Call Pickup - Codes for direct call pickup – own...
Page 552 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-10-04 Class of Service Options Turn off or on an extension ability 0 = Off (Answer Service) – Telephone to pick up a call ringing into a 1 = On...
Page 553 UNIVERGE SV8100 Issue 5.0 Dial 868 and the group number (1~9 or 01~64). Group Call Pickup 1 - 543...
Page 554 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 544 Group Call Pickup...
Page 555: Group Listen
UNIVERGE SV8100 Issue 5.0 Group Listen Description Group Listen permits a multiline terminal user to talk on the handset and have their caller’s voice broadcast over the telephone speaker. This lets the multiline terminal user’s co-workers listen to the conversation. Group Listen turns off the multiline terminal handsfree microphone so the caller does not pick the co-worker’s voices during a Group Listen.
Page 556 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to an extension. Class of Service of Extensions (1~15) Default:...
Page 557: Handset Mute
Handset Mute Description Handset Mute is provided to most terminals connected to the UNIVERGE SV8100 system. While talking on the Multiline Terminal handset, a station user can press a programmable function button to mute the transmit speech path. The station user can still hear the outside (or intercom) voice.
Page 558 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for Handset Line Key 1~48 Transmission Cut Off (code 40). 0~99 (Normal Function Code 851 by default)
Page 559: Handsfree And Monitor
UNIVERGE SV8100 Issue 5.0 Handsfree and Monitor Description Handsfree allows a Multiline Terminal user to process calls using the speaker and microphone in the telephone instead of the handset. Handsfree is a convenience for workers who do not have a free hand to pick up the handset.
Page 560 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Multiline Terminals Required Component(s) None Related Features Central Office Calls, Answering Central Office Calls, Placing Microphone Cutoff 1 - 550 Handsfree and Monitor...
Page 561 UNIVERGE SV8100 Issue 5.0 Prime Line Selection Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-02-08 Multiline Telephone Basic Data Use this option to set whether 0 = Preselect Setup – Automatic Handsfree pressing a key accesses a...
Page 562 Issue 5.0 UNIVERGE SV8100 To change a handset call into a Handsfree call: Press Speaker and hang up the handset. Press Speaker again to hang up. To change a Handsfree call into a handset call: Lift the handset. 1 - 552...
Page 563 UNIVERGE SV8100 Issue 5.0 To turn on/off Monitor: Press MIC, Feature + 1, or the Microphone Function Key (Program 15-07 or SC 851 : 02) to turn on or off the Microphone. Monitor is off when MIC LED is lit, the Microphone Function Key is lit, or the handset is lifted.
Page 564 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 554 Handsfree and Monitor...
Page 565: Handsfree Answerback/Forced Intercom Ringing
UNIVERGE SV8100 Issue 5.0 Handsfree Answerback/Forced Intercom Ringing Description Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by speaking toward the telephone, without lifting the handset. Like Handsfree, this is a convenience for workers who do not have a free hand to pick up the handset.
Page 566 Issue 5.0 UNIVERGE SV8100 Related Features Handsfree and Monitor Microphone Cutoff 1 - 556 Handsfree Answerback/Forced Intercom Ringing...
Page 567 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-15 System Numbering – Enable If required, change the service Handsfree Incoming Intercom code used for setting an extension (default = 821) Calls to voice announce for incoming ICM calls.
Page 568 Issue 5.0 UNIVERGE SV8100 Operation To enable Handsfree Answerback for your incoming Intercom calls: Press idle Speaker. Dial 821. Press Speaker to hang up. This disables Forced Intercom Ringing. To enable Forced Intercom Ringing for your incoming Intercom calls: Press idle Speaker.
Page 569 UNIVERGE SV8100 Issue 5.0 Press Speaker to hang up. This disables Handsfree Answerback. To change the way your Intercom call signals the extension you are calling: Dial 1. If ringing, your call voice-announces. If voice-announced, your call starts to ring the destination. This option is also available at single line telephones.
Page 570 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 560 Handsfree Answerback/Forced Intercom Ringing...
Page 571: Headset Operation
UNIVERGE SV8100 Issue 5.0 Headset Operation Description A multiline terminal user can use a customer-provided headset in place of the handset. Like using Handsfree, using the headset frees up the user’s hands for other work. However, Headset Operation provides privacy not available from Handsfree.
Page 572 Issue 5.0 UNIVERGE SV8100 Related Features Handsfree Answerback/Forced Intercom Ringing Programmable Function Keys 1 - 562 Headset Operation...
Page 573 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-62 Service Code Setup (for Setup/ If needed, change the service Entry Operation) – Headset Ring code used to adjust the Headset (default = 874) Volume Adjustment Ring Volume.
Page 574 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-09-07 Class of Service Options Turn Off (0) or On (1) an extension 0 = Off (Incoming Call Service) – Call ability to have calls queued if a call...
Page 575 UNIVERGE SV8100 Issue 5.0 To use the headset: The Headset key lights when on a call. To disconnect, press the Headset key again. You can still use the handset for calls or respond to voice-announced Intercom calls with the headset plugged in. The headset only activates when the Headset key is pressed.
Page 576 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 566 Headset Operation...
Page 577: Hold
UNIVERGE SV8100 Issue 5.0 Hold Description Hold lets an extension user put a call in a temporary waiting state. The caller on Hold hears silence or Music on Hold, not conversation in the extension user’s work area. While the call waits on Hold, the extension user may process calls or use a system feature.
Page 578 Issue 5.0 UNIVERGE SV8100 Conditions The called extension must lift the handset or press the Speaker key before the call can be placed on hold. Callers on Hold hear Music on Hold, if programmed. An extension can have function keys for System Hold and Exclusive Hold.
Page 579 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-30 Service Code Setup (for Service If required, redefine the service MLT, SLT Access) – Specified Trunk code used to answer a specific (default = 772)
Page 580 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-02-06 Multiline Telephone Basic Data Use this option to set the function 0 = Normal (Common) Setup – Hold Key Operating of the Multiline Hold key. The Hold 1 = Exclusive Hold...
Page 581: System Hold
UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-11-10 Class of Service Options (Hold/ In an extension Class of Service, 0 = Off Transfer Service) – Group Hold enable (1) or disable (0) an 1 = On...
Page 582 Issue 5.0 UNIVERGE SV8100 To pick up an outside call on System Hold: Press the flashing CAP key. - OR - If you know the specific line number, dial 772 + Line number (001~200). Exclusive Hold To place an outside call on Exclusive Hold: Press the Exclusive Hold key (Program 15-07-01 or SC 851: 45).
Page 583 UNIVERGE SV8100 Issue 5.0 To pick up a call on Group Hold: Press Speaker. Dial 862. Single Line Telephone Lift the handset. Dial 862. Intercom Hold To place an Intercom call on Intercom Hold: Press Hold. Press Speaker to hang up.
Page 584 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 574 Hold...
Page 585: Hot Key-Pad
UNIVERGE SV8100 Issue 5.0 Hot Key-Pad Description The Hot Key-Pad feature allows the user to place a call without lifting the handset or pressing Speaker. When the user dials another extension number on an idle telephone with Hot Key-Pad enabled, the Speaker lights and the internal call is made.
Page 586: Required Software
Issue 5.0 UNIVERGE SV8100 Required Software: None Related Features Central Office Calls, Placing Class of Service Dialing Number Preview Hotline Intercom Voice Response System (VRS) Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions...
Page 587 UNIVERGE SV8100 Issue 5.0 Dial the extension. Dialed extension rings. To place a trunk call using Hot Key-Pad: The multiline terminal is idle. No need to press speaker key. Dial the trunk access code, 9 by default, and the external destination number you wish to call.
Page 588 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 578 Hot Key-Pad...
Page 589: Hotel/Motel
Room Restriction Description Your UNIVERGE SV8100 telephone system provides Hotel/Motel services in addition to the many features available to business users. These Hotel/Motel services help you run your facility more efficiently, save you time and money and provide your guests with more responsive service.
Page 590 This requires the use of either the PMS-U10 or PVA PMS blade, which serve as a gateway between the PMS application, the UNIVERGE SV8100 and UM8000 Mail voice mail. When using UM8000 Mail voice mail you must have the RJ11 to DB-9 serial adapter. When using the PVA PMS blade you use IP to connect to the UM8000 providing it is running a minimum of 11.3 software.
Page 591 Room name can only be displayed on terminals set to 0 (Normal) in Program 42-02-01. The COM port is fixed at 9600 bauds, eight data bits, one stop bit, and no parity. Refer to the online UNIVERGE SV8100 Hotel/Motel Services Guide for complete programming information.
Page 592 Issue 5.0 UNIVERGE SV8100 Flexible Numbering Plan To simplify dialing guests and services in your facility, customize your system to have room numbers match phone extension numbers. For example, if the rooms on the first floor are numbered 100~120, the corresponding room extensions should also be 100~120.
Page 593 UNIVERGE SV8100 Issue 5.0 Dial Access Codes that Require CD-CP00 Hotel License (Continued) Program Dial Access Code Description 11-14-13 Check Out 11-14-14 Room Status Change for Own Extension 11-14-15 Room Status Change for Other Extension 11-14-16 Room Status Output 11-14-17...
Page 594 Issue 5.0 UNIVERGE SV8100 SV8100 Hotel/Motel License: LK-SYS-HM-LIC (Feature Code 0007) This license is required to enable the Hotel feature in the SV8100. UM8000 Hotel/Motel license: LKS-UMS-Hotel-PMS-LIC (Feature Code 1407) This license is only required when using the UM8000 Mail hotel features such as PMS integration and Hotel Guest room mailboxes.
Page 595 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-20-01 LAN Setup for External Define the TCP port (0~65535) 0~65535 Equipment – TCP Port when communicating to the SMDR default: (type 5). External Device 1 (CTI...
Page 596 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-14-05 Service Code Setup (for Hotel) – Customize the set wake up call for MLT, SLT Set Wake Up Call for Own own extension used with the (default = 731)
Page 597 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 11-14-15 Service Code Setup (for Hotel) – Customize the room status MLT, SLT Room Status Change for Other change for other extension (default = 741) Extension Service Codes which are used...
Page 598 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-17 Class of Service Options Turn Off or On the Barge-In 0 = Off (Supplementary Service) – (Intrusion) Tone. If disabled, this 1 = On Barge-In Tone/Display (Intrusion also turns off the Barge-In display...
Page 599 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 42-01-03 System Options for Hotel/Motel – Assign the wake up call no answer 0 = No Transfer Wake Up Call No Answer options for Hotel/Motel Service. 1 = Transfer to the...
Page 600 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 42-03-05 Class of Service Options (Hotel/ Set the Hotel/Motel wake up call 0 = Off Motel) – Wake up Call Setting for setting for other extension COS 1 = On Other Extension options.
Page 601 Level 1 = 11 Level 2 = 12 Level 3 = 13 Refer to the On Line UNIVERGE SV8100 Hotel/Motel Services Manual for complete programming information. Operation Refer to the On Line UNIVERGE SV8100 Hotel/Motel Services Manual for complete operation information.
Page 602 Issue 5.0 UNIVERGE SV8100 1 - 592 Hotel/Motel...
Page 603: Hotline
UNIVERGE SV8100 Issue 5.0 Hotline Description Hotline gives a multiline terminal user one-button calling and Transfer to another extension (the Hotline partner). Hotline helps co-workers that work closely together. The Hotline partners can call or Transfer calls to each other just by pressing a single key.
Page 604 Issue 5.0 UNIVERGE SV8100 A Hotline is a uniquely programmed function key. Default Setting Disabled Related Features Automatic Call Distribution (ACD) Distinctive Ringing, Tones and Flash Patterns Direct Station Selection (DSS) Console Do Not Disturb Handsfree Answerback/Forced Intercom Ringing Off-Hook Signaling...
Page 605 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for Hotline Line Key 1~48 (code 01 + partner’s extension 0~99 (Normal Function number). Code 851 by default)
Page 606: Table 1-11 Extension Busy Setup
Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-06 Class of Service Options Program 20-02-03 and Program 0 = Off (Supplementary Service) – 20-13-06 set the conditions under 1 = On Automatic Off-Hook Signaling which a Hotline, Reverse Voice...
Page 607 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 30-05-09 DSS Console Lamp Table – Hotel Use to define the LED patterns for Status Code 1 (Hotel DSS) hotel status code 1 on the DSS [default = 7 (On)] consoles.
Page 608 Issue 5.0 UNIVERGE SV8100 Table 1-11 Extension Busy Setup Busy Program 20-13-06 Program 20-02-03 Status Status BLF is on for extension receiving a voice announced Intercom call. 1 - 598 Hotline...
Page 609 UNIVERGE SV8100 Issue 5.0 Operation To place a call to your Hotline partner: Press the Hotline key (Program 15-07 or SC 851: 01 + partner’s extension number). You can optionally lift the handset after this step for privacy. To transfer your outside call to your Hotline partner: Press the Hotline key.
Page 610 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 600 Hotline...
Page 611: Howler Tone Service
UNIVERGE SV8100 Issue 5.0 Howler Tone Service Description Howler Tone Service provides a Howler Tone when a station remains off-hook after a call is completed or when a station is off-hook and digits are not dialed in a programmed time.
Page 612 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 602 Howler Tone Service...
Page 613: Intercom
Intercom Description Intercom gives extension users access to other extensions. This provides the system with complete internal calling ability. Handsfree Answerback/Forced Intercom Ringing Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by speaking toward the telephone, without lifting the handset. Like Handsfree, this is a convenience for workers who do not have a free hand to pick up the handset.
Page 614 Issue 5.0 UNIVERGE SV8100 Default Setting Enabled System Availability Terminals All Terminals Required Component(s) None Related Features Handsfree Answerback/Forced Intercom Ringing Intercom Line Preference Name Storing 1 - 604 Intercom...
Page 615 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-13 Service Code Setup (for Setup/ Select the service code which can Entry Operation) – Display be used at an extension to change (default = 778)
Page 616: Table 1-12 Incoming Ringing Tone
1 = Enable (Signal) Ring (ICM Call Type) Intercom Ringing (1). If disabled (default = 0) (0), Intercom calls voice-announce. For all NEC Cordless telephones, this option must be set to “1” as voice announce is not possible. 20-06-01 Class of Service for Extensions...
Page 617 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-08-10 Class of Service Options Turns Off or On an extension 0 = Off (Outgoing Call Service) – Signal/ allowing it to force Handsfree 1 = On Voice Call...
Page 618 Issue 5.0 UNIVERGE SV8100 Table 1-12 Incoming Ringing Tone Incoming Ring Tone Frequency 1 Frequency 2 Modulation Tone Number Type Pattern 2 High 1100 1400 8Hz Modulation (Trunk Incoming) 8Hz Modulation 8Hz Modulation Pattern 3 High 2000 16Hz Modulation (Trunk Incoming)
Page 619 UNIVERGE SV8100 Issue 5.0 Dial the extension number. You display shows your telephone extension number, port number and extension/Department Group. You can also check any other extension numbers information by pressing Help + the extension number. Press Exit to return the normal time/date display.
Page 620 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 610 Intercom...
Page 621: Isdn Compatibility
UNIVERGE SV8100 Issue 5.0 ISDN Compatibility Description ISDN-BRI Integrated Service Digital Network – Basic Rate Interface (ISDN-BRI) is a Public Switched Telephone Network (PSTN) service that provides two B channels and a D channel (2B + D) for voice call trunking.
Page 622 Issue 5.0 UNIVERGE SV8100 Caller ID information. If the Caller ID information is restricted, the telephone display shows PRIVATE. If the system is not able to provide Caller ID information because the Telco information is not available, then the display shows OUT OF AREA.
Page 623: Table 1-13 Restrictions For Calling Party Names
UNIVERGE SV8100 Issue 5.0 The UNIVERGE SV8100 supports receiving the name from the Network in supported formats only and cannot send the Calling Name. Refer to Table 1-13 Restrictions for Calling Party Names. Table 1-13 Restrictions for Calling Party Names...
Page 624 Issue 5.0 UNIVERGE SV8100 Refer to the charts below for examples: Trunk B-Channel Incoming Call Number Number Station User Talking on TK009 …31 …23 Incoming call from the Network on Channel 23. In most cases, the Network will control/select the B-Channel used for an incoming call.
Page 625 UNIVERGE SV8100 Issue 5.0 Trunk Trunk Trunk B-Channel Outgoing Call Number Group Priority Number Access code. Outgoing call is placed on the associated B-Channel. …31 ...1 …23 In addition to T1/PRI interface ETUs, PRI also requires a CSU/DSU Unit and interconnecting cables to interface with the Telco.
Page 626 Issue 5.0 UNIVERGE SV8100 If a data link error is detected by the BRI ETU, the system tries to recover the data link and send the SPID to the central office. To provide this enhancement, the BRI ETU must be able to indicate to the system when a data link error has occurred.
Page 627 UNIVERGE SV8100 Issue 5.0 NT-1 for each BRI (locally provided) Related Features Central Office Calls, Answering Central Office Calls, Placing Direct Inward Dialing (DID) Direct Inward Line (DIL) Forced Trunk Disconnect Station Message Detail Recording Transfer ISDN Compatibility 1 - 617...
Page 628 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming ISDN – BRI Installation Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (BRIA PKG) – ISDN Setup and confirm the Basic 0 = Not Used Line Mode Configuration data for each 1 = T-Point CD-2BRIA.
Page 629 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 10-06-02 ISDN BRI Setup – DID Mode Select the method the system 0 = Route by Called uses when assigning DID Mode to Party Number the BRI Circuit. 1 = Route by...
Page 630 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 10-03-18 ETU Setup (PRTA PKG Setup) – Select the number type for the 0 = Unknown Type of Number ISDN circuit. 1 = International number 2 = National number...
Page 631 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 21-01-03 System Options for Outgoing The time the system waits for the 0~64800 (seconds) Calls – Trunk Interdigit Time timer to expire before placing the (default = 5) (External) call in a talk state.
Page 632 Issue 5.0 UNIVERGE SV8100 Calling Party Number Presentation for either ISDN – BRI or PRI Program Program Name Description/Comments Assigned Data Number 10-03-05 ETU Setup (PRTA PKG Setup) – Based on this setting, the system 0 = Disable CLIP Information Announcement...
Page 633 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 0~9, 21-13-01 ISDN Calling Party Number Assign each extension a Calling Setup for Extensions Party Number (maximum 16 digits (Max. 16 digits) per entry). The calling number is (default not assigned) the subscriber number of the dial-in number.
Page 634 Issue 5.0 UNIVERGE SV8100 SMDR Dialed Digits for either ISDN – BRI or PRI Program Program Name Description/Comments Assigned Data Number 35-02-15 SMDR Output Options – CLI/DID Determine if the CLI/DID Number 0 = CLI (CLIP) Number Switching should be displayed.
Page 635 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-09-02 Class of Service Options Turns Off (0) or On (1) the Caller 0 = Off (Incoming Call Service) – Caller ID display at an extension. 1 = On...
Page 636 Issue 5.0 UNIVERGE SV8100 Programming Flowchart for ISDN-PRI – Answering Calls Start CD-PRTA In 10-03-01, determine the mode of the DTI( )-U40 ETU (0=not set, 1=T-Bus) Is the CRC In 10-03-03, enter Multi-Frame In 10-03-03, enter '0'. (CRC4) '1'. used? In 10-03-04, select the Layer 3 timer type (1-5).
Page 637 UNIVERGE SV8100 Issue 5.0 Should the sub-address In 20-09-03, set the In 20-09-03, set the ID be displayed for extension's COS to '0'. extension's COS to '1'. incoming calls? Should an extension In 20-13-23, set the In 20-13-23, set the be able to display the reason why extension's COS to '0'.
Page 638 Issue 5.0 UNIVERGE SV8100 Do you want In 22-01-04, Do not unanswered PRI In 22-01-04, Reroute enter 0. reroute calls to reroute if enter 0. unanswered? In 22-08-01, enter the no-answer Ring Group for unanswered PRI calls. For each extension in the...
Page 639 UNIVERGE SV8100 Issue 5.0 Programming Flowchart of ISDN-PRI – Placing Calls Start CD-PRTA In 10-03-01, determine the mode of the DTI( )-U40 ETU (0=not set, 1=T-Bus) Is the CRC In 10-03-03, enter Multi-Frame In 10-03-03, enter '0'. (CRC4) '1'. used? In 10-03-04, select the Layer 3 timer type (1-5).
Page 640 Issue 5.0 UNIVERGE SV8100 In 15-01-04, enter 0 Should Caller ID be included In 15-01-04, enter 1 In 10-03-05 enter 0 in the call's setup message? In 10-03-05 enter 1. In 20-09-03, enter 0 to Should telco display the In 20-09-03, enter 1 to...
Page 641 UNIVERGE SV8100 Issue 5.0 In 21-01-03, enter Is the amount of time the system waits before the interval for the placing the call in a talk state sufficient? trunk interdigit timer. Should extension users In 15-07-01, assign In 15-07-01, do not assign...
Page 642 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 632 ISDN Compatibility...
Page 643: Last Number Redial
Last Number Redial Description Last Number Redial allows an extension user to quickly redial the last number dialed. For example, a user may quickly recall a busy or unanswered number without manually dialing the digits. Last Number Redial saves in system memory the last 24 digits a user dials. The number can be any combination of digits 0~9, and *.
Page 644 Issue 5.0 UNIVERGE SV8100 Related Features Automatic Route Selection Repeat Redial Save Number Dialed Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-12 Service Code Setup (for Service Assign a service code (816) to use MLT, SLT Access) –...
Page 645 UNIVERGE SV8100 Issue 5.0 The system automatically selects a trunk from the same group as your original call and dials the last number dialed. - OR - At the multiline terminal, press Speaker or lift the handset (optional). The system automatically selects a trunk from the same group as your original call.
Page 646 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 636 Last Number Redial...
Page 647: Line Preference
UNIVERGE SV8100 Issue 5.0 Line Preference Description Line Preference determines how a multiline terminal user places and answers calls. There are two types of Line Preference: Incoming Line Preference and Outgoing Line Preference. Incoming Line Preference Incoming Line Preference establishes how a multiline terminal user answers calls. When a call rings the multiline terminal, lifting the handset answers either the ringing call (for Ringing Line Preference) or seizes an idle line (for Idle Line Preference).
Page 648 Issue 5.0 UNIVERGE SV8100 Default Setting Enabled System Availability Terminals Multiline Terminals Required Component(s) None Related Features Direct Inward Line (DIL) Ring Groups Trunk Groups 1 - 638 Line Preference...
Page 649 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-05-01 Trunk Group – Trunk Group For Auto-Answer of Non-Ringing Trunk Group Number: Number Lines, assign trunks to trunk 0~100 Priority Number: groups. This is part of Trunk 1~200 (default = Trunk Group Routing programming.
Page 650 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 14-07-01 Trunk Access Map Setup For Outgoing Line Preference and 0 = No access Auto-Answer of Non-Ringing 1 = Outgoing access Lines, set up the Trunk Access only Maps.
Page 651 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-04-01 Incoming Extension Ring Group Assign extensions to ring groups. Maximum eight digits Assignment Auto-Answer for Non-Ringing Default: Lines only works for trunks that do Extensions 101~108 not ring an extension.
Page 652 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 642 Line Preference...
Page 653: Long Conversation Cutoff
UNIVERGE SV8100 Issue 5.0 Long Conversation Cutoff Description For incoming and outgoing central office calls, each trunk can be programmed to disconnect after a defined time. The timer begins when the trunk is seized and disconnects the call after the time expires.
Page 654 Issue 5.0 UNIVERGE SV8100 Related Features Central Office Calls, Answering Central Office Calls, Placing Direct Inward System Access (DISA) Multiple Trunk Types Warning Tone for Long Conversation Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-14 Basic Trunk Data Setup – Long...
Page 655 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-21-04 System Options for Long Enter the time the system waits 0~64800 (seconds) Conversation – Long before disconnecting outgoing (default = 0) Conversation Cutoff for trunks (0~64800 seconds). Outgoing Call Operation This feature is automatic once it is programmed.
Page 656 Issue 5.0 UNIVERGE SV8100 1 - 646 Long Conversation Cutoff...
Page 657: Loop Keys
UNIVERGE SV8100 Issue 5.0 Loop Keys Description Loop keys are uniquely programmed function keys that simplify placing and answering trunk calls. There are three types of loop keys: Incoming Only, Outgoing Only and Both Ways. Incoming Only Loop Keys Incoming Only loop keys are for answering trunk calls. An extension can have an incoming loop key for a specific trunk group (fixed) or a “catch all”...
Page 658 Issue 5.0 UNIVERGE SV8100 Default Setting Disabled System Availability Terminals Multiline Terminals Required Component(s) None Related Features Automatic Route Selection (ARS) / Central Office Calls, Answering / Central Office Calls, Placing Program incoming and outgoing access and routing options. Off Hook Signaling If enabled, a user hears Call Waiting beeps if additional calls are waiting behind a loop key.
Page 659 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-05-01 Trunk Group – Trunk Group Assign trunks to trunk groups. In Trunk Group Number: Number general, loop keys access trunks 0~100 Priority Number: within specific trunk 1~200 (default = Trunk groups.
Page 660 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Program function keys as trunk Line Key 1~48 group/loop keys (*02 or *05). For 0~99 (Normal Function additional data, enter 0 (incoming Code 851 by default)
Page 661 UNIVERGE SV8100 Issue 5.0 Operation To place a call on a loop key: Press outgoing or both ways loop key. You hear dial tone and the key lights green. Dial number. To answer a call on a loop key: Listen for ringing a look for a flashing loop key.
Page 662 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 652 Loop Keys...
Page 663: Meet Me Conference
Meet Me Conference Description With Meet Me Conference, an extension user can set up a Conference with their current call and up to 32 other internal or external parties. Each party joins the Conference by dialing a Meet Me Conference code. Meet Me Conference lets extension users have a telephone meeting –...
Page 664 Issue 5.0 UNIVERGE SV8100 Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign function keys for Line Key 1~48 Conference (code 07). 0~99 (Normal Function Code 851 by default) 00 ~...
Page 665 UNIVERGE SV8100 Issue 5.0 Internal/External All Call). Announce the zone. When a co-worker answers your page, press Conf twice. Repeat steps 1~4 for each co-worker you want to add. Single Line Telephone While on a call, hookflash and dial 826.
Page 666 Issue 5.0 UNIVERGE SV8100 Single Line Telephone While on a call, hookflash and dial 826. Dial 751 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for Internal/External All Call). Announce the zone. When a co-worker answers your page, press hookflash twice.
Page 667: Meet Me Paging
UNIVERGE SV8100 Issue 5.0 Meet Me Paging Description Meet Me Paging allows an extension user to Page a co-worker and privately meet with them on a Page zone. The Paging zone is busy to other users while the meeting takes place. While the co-workers meet on the zone, no one else can hear the conversation, join in or make an announcement using that zone.
Page 668 Issue 5.0 UNIVERGE SV8100 Meet Me Paging Transfer Paging, External Paging, Internal Programmable Function Keys 1 - 658 Meet Me Paging...
Page 669 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-21 Service Code Setup (for Service Use to customize the Service MLT, SLT Access) – Meet-Me Answer to Codes used for meet-me answer (default = 864)
Page 670 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 31-02-02 Internal Paging Group Allow or deny All Call Internal 0 = Off Assignment – Internal All Call Paging for each extension. If 1 = On Paging Receiving allowed, extension can place and...
Page 671 UNIVERGE SV8100 Issue 5.0 Operation Meet Me External Page To make a Meet Me External Page: At multiline terminal, press Speaker or pick up the handset. - OR - At the single line telephone, lift the handset. Dial 803 and the External Paging Zone code (1~8 or 0 for All Call).
Page 672 Issue 5.0 UNIVERGE SV8100 Dial 801 and dial the Internal Paging Zone code (0~9, 00~32 or 00~64). - OR - Dial 751 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for Internal/External All Call). Announce the zone.
Page 673: Meet Me Paging Transfer
UNIVERGE SV8100 Issue 5.0 Meet Me Paging Transfer Description If a user wants to Transfer a call to a co-worker but they do not know where the co-worker is, they can use Meet Me Paging Transfer. With Meet Me Paging Transfer, the user can Page the co-worker and have the call automatically Transfer when the co-worker answers the Page.
Page 674 Issue 5.0 UNIVERGE SV8100 Related Features Meet Me Conference Meet Me Paging Paging, External Paging, Internal Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-21-04 CD-CP00 Hardware Setup – Define what the I/O ports on the...
Page 675 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign function keys for External Line Key 1~48 Zone Paging (code 19 + zone), 0~99 (Normal Function External All Call Paging (code 20), Code 851 by default)
Page 676 Issue 5.0 UNIVERGE SV8100 Operation Meet Me External Paging Transfer To make a Meet Me External Paging Transfer: At the multiline terminal, while on a call, press Hold. - OR - At the single line telephone, while on a call, hookflash.
Page 677 UNIVERGE SV8100 Issue 5.0 From a multiline terminal, when the paged party answers, press Transfer or the Transfer softkey. - OR - From a single line telephone, when the paged party answers, hang up. The party is transferred. To join a Meet Me External Paging Transfer: At the multiline terminal, press Speaker or pick up handset.
Page 678 Issue 5.0 UNIVERGE SV8100 To join a Meet Me Internal Paging Transfer: At the multiline terminal, press Speaker or pick up handset. - OR - At the single line telephone, lift the handset. Dial 863 (if your extension is in the zone called).
Page 679: Memo Dial
UNIVERGE SV8100 Issue 5.0 Memo Dial Description While on an outside call, Memo Dial lets a multiline terminal user store an important number for easy redialing later on. The telephone can be like a notepad. For example, a user could dial Directory Assistance and ask for a client’s telephone number.
Page 680 Issue 5.0 UNIVERGE SV8100 Related Features Central Office Calls, Placing Last Number Redial Save Number Dialed Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for Memo Line Key 1~48 Dial (code 31).
Page 681 UNIVERGE SV8100 Issue 5.0 To check to see the stored Memo Dial number: Do not lift the handset. Press Memo Dial key (Program 15-07 or SC 851: 31). The stored number displays. To cancel (erase) a stored Memo Dial number: Press Speaker.
Page 682 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 672 Memo Dial...
Page 683: Message Waiting
UNIVERGE SV8100 Issue 5.0 Message Waiting Description An extension user can leave a Message Waiting indication at a busy or unanswered extension requesting a return call. The indication is a flashing MW lamp at the called extension and a steadily lit MW lamp on the calling extension.
Page 684 Issue 5.0 UNIVERGE SV8100 Conditions Reminder messages require a DSP daughter board for VRS messages. Analog ports from APA or APR adapters do not provide Message Waiting lamping. When a user responds to a Message Waiting, the system does not cancel the Message Waiting indication if the called party uses Handsfree Answerback.
Page 685 UNIVERGE SV8100 Issue 5.0 Required Component(s) None Message Waiting 1 - 675...
Page 686 Issue 5.0 UNIVERGE SV8100 Related Features Handsfree Answerback/Forced Intercom Ringing Hotel/Motel Programmable Function Keys InMail Voice Response System (VRS) Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-16 Service Code Setup (for System Use to customize the leave Administrator) –...
Page 687 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-02-35 Multiline Telephone Basic Data Select the cycle method that the 1 = Cycle 1 Setup – Message Waiting Lamp Large LED flashes when the 2 = Cycle 2...
Page 688 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-01-02 Service Tone Setup – Basic Tone Use to customize Service Tones. (default = 0) (48) Number Operation To leave a Message Waiting: Call busy or unanswered extension. Press the Message Waiting key (Program 15-07 or SC 851: 38).
Page 689 UNIVERGE SV8100 Issue 5.0 To answer a Message Waiting: When you have a message, your Message Waiting LED flashes fast for multiline terminals. At the multiline terminal, press Speaker and dial 841. - OR - Press the Message Waiting key (Program 15-07 or SC 851: 38).
Page 690 Issue 5.0 UNIVERGE SV8100 To check your messages: Press Help. Dial 841. You can have any combination of the message types in the table below on your telephone. If you see. . . You have. . . New messages in your Voice Mail mailbox.
Page 691: Microphone Cutoff
UNIVERGE SV8100 Issue 5.0 Microphone Cutoff Description Microphone Cutoff lets a multiline terminal user turn off their telephone handsfree or handset microphone at any time. When activated, Microphone Mute prevents the caller from hearing conversations in the user’s work area. The user may turn off the microphone while their telephone is idle, busy on a call or ringing.
Page 692 Issue 5.0 UNIVERGE SV8100 Related Features Handsfree Answerback/Forced Intercom Ringing Handset Mute Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys If an extension needs handset For Line Keys: 1~48 microphone cutoff, program a...
Page 693 UNIVERGE SV8100 Issue 5.0 This turns off both the handset and Handsfree microphone. To turn your telephone microphone back on: Press MIC. Use MIC only if you pressed it initially to turn off your Handsfree microphone. - OR - Press the Microphone Cutoff key (Program 15-07 or SC 851: 40).
Page 694 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 684 Microphone Cutoff...
Page 695: Mobile Extension
(ports are reserved in groups of 4), however, no PCB support (analog or digital) is required. The Mobile Extension port must be an unequipped extension port on the UNIVERGE SV8100 system - no physical keyset is required on the SV8100 system.
Page 696 Issue 5.0 UNIVERGE SV8100 If all external trunks are busy when a call is made to the mobile extension, ringback tone is presented giving the impression the phone is ringing. A DID is directed to the Mobile Extension internal extension number (Proxy Port), and to provide internal dial tone to the Mobile Extension, the incoming CLI of the Mobile Extension must match the number in the Speed Dial bin.
Page 697: Table 1-14 Supported Service Codes
UNIVERGE SV8100 Issue 5.0 Toll Restriction Class of Service DSS Keys Though DSS keys are available for the Mobile Extension, they cannot provide an exact indication of busy status if, for example, the Mobile Extension is active on a call not linked to the UNIVERGE SV8100.
Page 698 Issue 5.0 UNIVERGE SV8100 Table 1-14 Supported Service Codes (Continued) Set By Set to Program Code Mobile Mobile Type Incoming Feature Extension Extension Auto Attendant 11-11-44 Bypass Call 11-12-01 Conference 11-12-02 Override (Off-Hook Signalling) 11-12-03 Set Camp-On 11-12-04 Cancel Camp-On...
Page 699 UNIVERGE SV8100 Issue 5.0 Table 1-14 Supported Service Codes (Continued) Set By Set to Program Code Mobile Mobile Type Incoming Feature Extension Extension Answer for Park Hold 11-12-32 Group Hold 11-12-33 Answer for Group Hold 11-12-34 Personal (Extension) Park 11-12-35...
Page 700 Issue 5.0 UNIVERGE SV8100 Table 1-14 Supported Service Codes (Continued) Set By Set to Program Code Mobile Mobile Type Incoming Feature Extension Extension Cancel Room to Room Call Restriction (Hotel) 11-14-10 Change Toll Restriction Class for Other Extension 11-14-11 Check-in...
Page 701 UNIVERGE SV8100 Issue 5.0 Caller ID Presented to the Mobile Extension* for Type of Call Direct Internal Call – CPN of the Calling Phone is presented to the Mobile Extension (V3.0 or higher software required). Direct Trunk Call with CID – Caller ID of incoming call is presented to the Mobile Extension** (V3.0 or higher software required).
Page 702 Issue 5.0 UNIVERGE SV8100 E.g. conference is set as *826 Mobile extension receives call and answers it ME dials *# to place call on hold ME dial **826 to initiate conf facility ME dials another party Upon answer ME dials *#*# to join all parties together.
Page 703 UNIVERGE SV8100 Issue 5.0 Figure 1-12 Example - Callback to Cell Phone Conditions Mobile Extension must be programmed for this feature to work. In the Callback to Cell Phone feature set Program 15-22-04 to 1. If the Cell Phone user continues to ring over the time set in Program 22-01-12, the system answers the call as a normal Mobile Extension call.
Page 704 Issue 5.0 UNIVERGE SV8100 The Callback to Cell Phone feature is not supported when using an analog trunk. If Flexible ringing is set, the Callback to Cell Phone feature works in any type of Program 22-02-01 trunk setting. If Flexible ringing is not set, the Callback to Cell Phone feature does not work if the incoming call type is “DID/DISA”.
Page 705 UNIVERGE SV8100 Issue 5.0 Related Features Speed Dial – System/Group/Station Caller ID Call Forwarding Direct Inward Dialing (DID) Direct Inward Line (DIL) Station Message Detail Recording Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-02-01 Extension Numbering...
Page 706 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 11-13 Service Code Setup (for ACD) Used to customize the service Please refer to the codes for ACD. SV8100 Programming Manual for more information on this program. 13-04-01 Speed Dialing Number and Name...
Page 707 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-22-04 Mobile Extension Setup - Select if callback to Cell Phone is 0 = no callback Callback required 1 = callback (default = 0) 20-03-04 System Options for Single Line...
Page 708 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-01-01 Service Tone Setup – Tone 44, It is necessary to adjust the DID/ 0~255 (0 = until External Dial Tone DISA dial tone (tone 44) to a On-Hook) Repeat Count of 250 (by default, this is set to 0).
Page 709 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-03 DTMF Tone Receiver Setup – For the extension DTMF, the 0~15 Min. Detect Level minimum Detect Level (0-15) for detect level 0: the DTMF Tone must be set to –10dBm(0) to...
Page 710 Issue 5.0 UNIVERGE SV8100 Callback to Cell Phone Program Program Name Description/Comments Assigned Data Number 13-04-01 Speed Dialing Number and Name For the bin number defined in 1~9, 0, – Speed Dialing Data Program 15-22-01 for the Mobile Pause (Press line key...
Page 711 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-22-04 Mobile Extension Setup - Select if callback to Cell Phone is 0 = no callback Callback required 1 = callback (default: 0) 20-01-16 System Options - Mobile Set up the system callback...
Page 712 Program 15-22-02 set to 0 or 1 (DTMF Confirmation Required): The caller is retrieved by the UNIVERGE SV8100 and follows the no-answer programming (ring another extensions, forward to UNIVERGE SV8100 voice mail, etc.) Program 15-22-02 set to 2 (No DTMF Confirmation Required): The caller is forwarded to the external extension voice mail, if available.
Page 713 UNIVERGE SV8100 Issue 5.0 Answering a Call on the Mobile Extension Answer the ringing call. If Program 15-22-02 is set to 0 or 1, the Mobile Extension user hears Music on Hold/ring tone. Press * (within 10 seconds) to answer the call.
Page 714 Issue 5.0 UNIVERGE SV8100 To activate or cancel Call Forwarding to/from the Mobile Extension: When activating Call Forwarding From the Mobile Extension: Dial the DID or DIL telephone number for the Mobile Extension. If the Caller ID of the Mobile Extension matches the Speed Dial bin entry (Program 13-04 and 15- 22), internal dial tone is heard by the Mobile Extension user.
Page 715 UNIVERGE SV8100 Issue 5.0 Dial Call Forwarding Type: 2 = All Calls 3 = Outside calls only 4 = Intercom calls only Hang up. To cancel Call Forward Follow Me: When activating Call Forwarding From the Mobile Extension: Dial the DID or DIL telephone number for the Mobile Extension.
Page 716 Issue 5.0 UNIVERGE SV8100 The Cell Phone user hangs up within 3 seconds, before system answers. System makes the Callback to the cell phone. Answer the cell phone within 15 seconds. Cell phone hears a dial tone and sends DTMF before 30 seconds.
Page 717 UNIVERGE SV8100 Issue 5.0 THIS PAGE INTENTIONALLY LEFT BLANK Mobile Extension 1 - 707...
Page 718 Issue 5.0 UNIVERGE SV8100 1 - 708 Mobile Extension...
Page 719: Music On Hold
In accordance with European. copyright law, a license may be required if radio, television broadcasts or music other than material not in the public domain are transmitted through the Music on Hold feature of telecommunications systems. NEC Philips Unified Solutions hereby disclaim any liability arising out of the failure to obtain such a license. Conditions A maximum of 97 Music on Hold sources are possible;...
Page 720 Issue 5.0 UNIVERGE SV8100 System Availability Terminals None Required Component(s) PGD(2)-U10 ADP 1 - 710 Music on Hold...
Page 721 UNIVERGE SV8100 Issue 5.0 Related Features Voice Response System Voice Response System (VRS) Upload Download Audio Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-04-01 Music on Hold Setup – Music on Determine whether the system 0 = Internal MOH (IC)
Page 722 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 14-08-01 Music on Hold Source for Trunks For each trunk, set the Music on 0 = Internal/External – MOH Type Hold source. 1 = Customer Provided Source Connected to...
Page 723 11 = -- Not Used -- PGD(2)-U10 ADP, reconnect the (default = 0) module to the system. Refer to the UNIVERGE SV8100 System Hardware Manual for the jumper strap settings. 11-06-01 ACI Extension Numbering Each ACI port must be assigned ACI Ports: 1~96 an extension number.
Page 724 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 33-02-01 ACI Department Calling Group Assign ACI software ports to an ACI Ports: 1~96 ACI Department Group. This lets ACI Groups: 1~16 ACI callers connect to ACI Default: software ports by dialing the group...
Page 725 UNIVERGE SV8100 Issue 5.0 Music on Hold 1 - 715...
Page 726 Issue 5.0 UNIVERGE SV8100 1 - 716 Music on Hold...
Page 727 UNIVERGE SV8100 Issue 5.0 Operation None Music on Hold 1 - 717...
Page 728 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 718 Music on Hold...
Page 729: Name Storing
Name Storing Description Extensions and trunks can have names instead of just circuit numbers. These names show on a multiline terminal display when the user places or answers calls. Extension and trunk names make it easier to identify callers. The user does not have to refer to a directory when processing calls.
Page 730 Issue 5.0 UNIVERGE SV8100 Required Component(s) None Related Features Directory Dialing Single Line Telephones Speed Dial – System/Group/Station Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-22 Service Code Setup (for Setup/ Used to customize the service Entry Operation) –...
Page 731 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-48 Class of Service Options Determine if a station Number will 0 = Off (Supplementary Service) – be displayed (On) or not displayed 1 = On Station Name Display...
Page 732: Table 1-15 Keys For Entering Names
Issue 5.0 UNIVERGE SV8100 Operation Refer to Table 1-15 Keys for Entering Names for and explanation for using the keypad to enter names. Table 1-15 Keys for Entering Names Use this keypad digit . . . When you want to. . .
Page 733: Night Service
UNIVERGE SV8100 Issue 5.0 Night Service Description Night Service lets system users activate one of the Night Service modes. Night Service redirects calls to their night mode destination, as determined by Assigned and Universal Night Answer programming. A user typically activates Night Service after normal working hours, when most employees are unavailable to answer calls.
Page 734 Issue 5.0 UNIVERGE SV8100 You may also be able to use Transfer to UNA. An extension user can transfer their call to UNA (i.e., External Paging at night). Once transferred, the call rings the External Paging speakers like any other UNA call and can be picked up at any extension.
Page 735 UNIVERGE SV8100 Issue 5.0 When programming Night Service function keys, multiple keys must be used for switching between each Night Service Mode. Virtual Extension Ring Assignment (command 15-09) follows the ring assignment for the Night Mode Group the Virtual extension is assigned to (default - Night Mode Group 1) and not the Night Mode Group of th ekeyset the virtual is appearing on.
Page 736 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-10-01 Service Code Setup (for System Customize the service code (818) MLT,SLT Administrator) – Night Mode to be used for day/night mode (default = 818) Switching switching.
Page 737 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 12-03-01 Weekly Night Service Switching Assign one of the 10 Time Night Mode Service Patterns programmed in Program Group Numbers: 12-02-01 to each day of the week. 01~32 Time Schedule Pattern...
Page 738 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 12-07-01 Text Data for Night Mode Create an original text message Night Mode Service which is displayed on an LCD of Group Number: multiline terminal in each Night 01~32 Mode.
Page 739 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 14-07-01 Trunk Access Map Setup To allow for Universal Night 0 = No access Answer (UNA) answering, set up 1 = Outgoing access the Trunk Access Maps (1~200). only...
Page 740 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-07-01 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Manual extension for manually Switching 1 = On Night Service Enabled...
Page 741 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 31-05-01 Universal Night Answer/Ring For each Night Service Mode, 0 = No Ringing (No) Over Page assign which trunks should ring 1 = Ringing (Yes) which External Paging Zones.
Page 742 Issue 5.0 UNIVERGE SV8100 To activate Night Service by using programmable keys: Press Night Service key (Program 15-07-01 or SC 751:09 + Mode code number below). 1 = Day 1 Mode 2 = Night 1 Mode 3 = Midnight 1 Mode...
Page 743: Off-Hook Signaling
Off-Hook Signaling Description Off-Hook ringing alerts a Multiline Terminal user that an incoming outside call is ringing to that station during another call. Off-Hook Signaling helps important callers get through, without waiting in line for the called extension to become free. The system provides the following Off- Hook Signaling options: Called Extension Block The called extension Class of Service may block incoming Off-Hook Signaling attempts.
Page 744 Issue 5.0 UNIVERGE SV8100 signals manually sent from a co-worker. If disabled (not blocked), callers can dial * at busy or busy/ ring to signal the extension. If enabled (blocked), nothing happens when the caller dials * to off- hook signal.
Page 745 UNIVERGE SV8100 Issue 5.0 Required Component(s) None Related Features Callback Call Waiting/Camp-On Direct Inward Dialing (DID) Handsfree and Monitor Hotline Intercom One-Touch Calling Programmable Function Keys Reverse Voice Over Single Line Telephones Off-Hook Signaling 1 - 735...
Page 746 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-03 Service Code Setup (for Service Assign a service code (809 by MLT, SLT Access) – Override (Off-Hook default) to be used for Off-Hook (default =809) Signaling) Signaling Override.
Page 747 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-34 Class of Service Options Turn Off (0) or On (1) an extension 0 = Off (Supplementary Service) – Block ability to block off-hook signals 1 = On Manual Off-Hook Signaling manually sent from a co-worker.
Page 748 Issue 5.0 UNIVERGE SV8100 Operation To send Off-Hook signals to an extension busy on a call: Your extension may send off-hook signals automatically. Dial service code. - OR - Press Off-Hook Signaling key (Program 15-07 or SC 851: 33). You hear ringback.
Page 749: One-Touch Calling
UNIVERGE SV8100 Issue 5.0 One-Touch Calling Description One-Touch Calling gives a multiline terminal user one-button access to extensions, trunks, speed dial bins and selected system features. This saves users time when accessing co-workers, clients and features they use most often. Instead of dialing a series of codes, the user need only press the One-Touch key.
Page 750 Issue 5.0 UNIVERGE SV8100 (answer supervision), and then sends the rest of the digits. Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom calls, or after the @ for ISDN calls. ARS with Max Digits is not supported when entering the @ or a P (pause) in the dial string of a DSS/One Touch button.
Page 751 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Define a Programmable Function For Line Keys: 1~48 Key for One-Touch Calling by 0 ~ 99 (Normal defining the key as a DSS/ Function Code) One-Touch key (01).
Page 752 Issue 5.0 UNIVERGE SV8100 Dial 01 (DSS/One-Touch Key Operation). For Direct Station Selection (Extension): a. Dial extension number you want assigned to that key. b. Press Hold. c. Press Speaker. For Personal Speed Dial: a. Dial the general trunk access code (9).
Page 753 UNIVERGE SV8100 Issue 5.0 For Central Office Calls, Placing (Trunk Calling): a. a. Dial the general trunk access code (9). - OR - Dial the specific Trunk Service Code (805) plus the trunk number (e.g., 005). - OR - Dial the Trunk Group Service Code (804) plus the trunk group number (e.g., 1).
Page 754 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 744 One-Touch Calling...
Page 755: Operator
UNIVERGE SV8100 Issue 5.0 Operator Description When an extension user dials 0, calls are routed to a main system operator. The operator can answer and route outside calls or locate employees using the Page feature. A maximum of eight operators is available.
Page 756 Issue 5.0 UNIVERGE SV8100 Related Features Attendant Call Queuing Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-01-01 System Options – Operator Use this program to set up priority 0 = Step Access Mode of a call when calling an operator 1 = Circular telephone (0 = Step, 1 = Circular).
Page 757: (Opx) Off-Premise Extension
UNIVERGE SV8100 Issue 5.0 (OPX) Off-Premise Extension Description Off-Premise Extension allows a single line telephone, located remotely from the main installation site, to access the system features with the same abilities as an on-premise single line telephone. Conditions Each CD-4DIOPA provides four off-premise circuits.
Page 758 97~160 = 0 (Common) When PZ-BS10 is installed, 97~160 are available 15-03-01 Single Line Telephone Basic For each UNIVERGE SV8100 0 = DP Data Setup – SLT Signaling Type voice mail extension, this option 1 = DTMF must be set to 0.
Page 759 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-03-08 Single Line Telephone Basic Used to enable or disable Answer 0 = Disable Data Setup – Answer On-Hook On-Hook when Holding for SLT. (No) when Holding (SLT) 1 = Yes...
Page 760 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-03-03 System Options for Single Line Type 0: The system keeps the 0 = Receive all dialed digits dialed by the single line Telephones – SLT DTMF Dial to data, before sending telephone on a trunk in a buffer.
Page 761 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-13 Class of Service Options Turn Off (0) or On (1) the 0 = Off extension ability to use Continued (Supplementary Service) – 1 = On Dialing, which allows DTMF signal...
Page 762 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-03 DTMF Tone Receiver Setup – Use this option to define the 0~15 Min. Detect Level minimum detection level for DTMF detect level 0: Tone Receiver. –10dBm(0) to –25dBm(15) detect level 1: –15dBm(0) to –...
Page 763 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-04 DTMF Tone Receiver Setup – Use this option to define the 0~15 Max. Detect Level maximum detection level for detect level 0: 0dBm(0) DTMF Tone Receiver. to –15dBm(15) detect level 1: –5dBm(0) to –...
Page 764 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-05 DTMF Tone Receiver Setup – Use this option to define the Forward Twist Level forward twist level for DTMF Tone (1dB ~ 10dB) Receiver. default: Type 1 = 5 (6dBm)
Page 765 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 82-11-01 LCA Initial Setup – Bounce Specify a time for detection of a 0 = No Setting Protect Time valid 0ff-Hook indication that is 1~15 = 100ms~1.5sec long enough to prevent an...
Page 766 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 756 (OPX) Off-Premise Extension...
Page 767: Paging, External
Paging allows a user to locate another employee or make an announcement without calling each extension individually. The UNIVERGE SV8100 system allows up to eight External Paging zones, or a common zone output provided by the CPU (Speaker 9). All other speakers ( 1~8) require a port on a PGD(2)-U10 ADP, with a maximum of two external paging circuits per module.
Page 768 Issue 5.0 UNIVERGE SV8100 DID and DIL trunks do not ring external page speakers. Only trunks defined as normal in Program 22-02-01 ring external page speakers. Paging keys can be assign on Programmable Function Keys and Direct Station Selection (DSS) Consoles to simplify External Paging operation.
Page 769 UNIVERGE SV8100 Issue 5.0 Direct Inward Line (DIL) Direct Station Selection (DSS) Console Door Box Night Service Paging, Internal Programmable Function Keys Transfer Paging, External 1 - 759...
Page 770 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-05-01 General Purpose Relay Setup – Define which relay circuits (5~8) Slot No: 0~24 Slot No. Physical Port of DLCA on the PGD(2)-U10 ADP are used DCLA Port: 0~16 Sensor Circuit No.
Page 771 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 31-01-02 System Options for Internal/ Set the maximum allowable 0~64800 (seconds) External Paging – Page duration for a Paging (default = 1200 Announcement Duration announcement. seconds) 31-03-01 Internal Paging Group Settings –...
Page 772 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 31-06-05 External Speaker Control – Select the CODEC gain types External Paging CODEC Receive Gain Setup (1~32) for each External Page Speaker/Zone: 1~9 Speaker. 1~63 (-15.5 ~ +15.5dB) (default = 32)
Page 773 UNIVERGE SV8100 Issue 5.0 Dial 803 and the External Paging Zone code (1~8 or 0 for All Call). - OR - Dial 751 and the Combined Paging Group code (1~8 or 0 for Internal/External All Call). Display indicates the Combined Paging as an External Page.
Page 774 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 764 Paging, External...
Page 775: Paging, External (Vrs)
UNIVERGE SV8100 Issue 5.0 Paging, External (VRS) Description Paging, External (VRS) enables the useof prerecorded messages for External Paging. The advantage of this feature is saving time for the users who regularly use External Paging with the same announcements. Conditions If VRS External Paging is answered using the meet me paging servce code and both parties are connected, VRS stops th eannouncement.
Page 776 Issue 5.0 UNIVERGE SV8100 Single Line Telephones H.323 Terminals Standard SIP Terminals Required Component(s) PZ-VM21 InMail Compact Flash CD-8DLCA, CD-16DLCA or CD-LTA for PGD(2)-U10 ADP PGD(2)-U10 ADP for Zone Paging 1- or 2-way amplifier and speakers (locally provided) Related Features...
Page 777 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-13 Class of Service Options Turn Off or On an extension user 0 = Off (Administrator Level) - VRS ability to record, erase and listen 1 = On Record (VRS Msg Operation) to VRS messages.
Page 778 Issue 5.0 UNIVERGE SV8100 1 - 768 Paging, External (VRS)
Page 779: Paging, Internal
UNIVERGE SV8100 Issue 5.0 Paging, Internal Description Internal Paging lets extension users broadcast announcements to other multiline terminal users. When a user makes a Zone Paging announcement, the announcement broadcasts to all idle extensions in the zone dialed. With All Call Paging, the announcement broadcasts to all idle extensions programmed to receive All Call Paging.
Page 780 Issue 5.0 UNIVERGE SV8100 A single line telephone can initiate an Internal Zone page, but cannot receive an Internal Zone Page. Default Setting Enabled System Availability Terminals All Multiline Terminals Single Line Telephones Required Component(s) None Related Features Meet Me Paging...
Page 781 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-19 Service Code Setup (for Service Service code setup. MLT, SLT Access) – Internal Group Paging (default = 801) 11-12-24 Service Code Setup (for Service...
Page 782 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 31-02-02 Internal Paging Group Turn On (1) or Off (0) All Call 0 = Off Assignment – Internal All Call Internal Paging for each 1 = On Paging Receiving extension.
Page 783 UNIVERGE SV8100 Issue 5.0 Dial 801 and the Paging Zone number (0~9 or 00~64). Dialing 0 or 00 calls All Call Internal Paging. - OR - Dial 751 and the Combined Paging Group code 1~8 or 0 (for Internal/External All Call).
Page 784 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 774 Paging, Internal...
Page 785: Park
The Personal Park feature is enhanced by using a Programmable Function Key or service code (3-digit or 1-digit) to place a call in Personal Park. This option is available for multiline terminals, single line sets, and UNIVERGE SV8100 Wireless telephones and can be used for analog or ISDN trunks. Conditions An extension user can park a call in any Park Orbit.
Page 786 Issue 5.0 UNIVERGE SV8100 Using Using 3-Digit Using 1-Digit Status Personal Service Code Service Code Park Key Speaking Not Available Not Available Available ICM Dial Tone or Busy Tone Available Not Available Available Calling Another Extension Not Available Available Available...
Page 787 UNIVERGE SV8100 Issue 5.0 Personal Park at a Co-Worker’s Extension Description The Personal Park feature allows an extension user to place an outside call, which is on hold, on Personal Park at a co-worker’s extension after placing an intercom call. This feature is available for keysets, SLTs, IP terminals and IP DECT terminals.
Page 788 Issue 5.0 UNIVERGE SV8100 Required Component(s) None 1 - 778 Park...
Page 789 UNIVERGE SV8100 Issue 5.0 Related Features Caller ID Call Arrival (CAR) Keys Direct Station Selection (DSS) Console Hold Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-31 Service Code Setup (for Service Set the service code which should MLT, SLT Access) –...
Page 790 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-18-01 Virtual Extension Key Enhanced This program sets whether an 0 = Release Options – Virtual Extension Key incoming call to a Virtual 1 = Land On the Key...
Page 791 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 24-01-02 System Options for Hold – Hold A trunk recalling from Hold or Park 0~64800 (seconds) Recall Callback Time rings an extension for this time. (default = 30) After this time the system invokes the Hold recall time again.
Page 792 Issue 5.0 UNIVERGE SV8100 Press Speaker to hang up. If not picked up, the call recalls to you. - OR - At the multiline terminal or 2-button telephone, press Hold. - OR - At a single line telephone, hookflash. Dial 831 and the Park orbit (01~64).
Page 793 UNIVERGE SV8100 Issue 5.0 Press the Personal Park key (Program 15-07 or SC 852: *07). - OR - Press Hold and dial 773. - OR - Press Hold and the Personal Park key (Program 15-07 or SC 852: *07). At a single line telephone, hookflash instead of pressing HOLD.
Page 794 Issue 5.0 UNIVERGE SV8100 instead. If the co-worker does not answer th ecall, it will recall to the originator’s extension. To pick up a call parked at your extension: Press the Personal Park key (Program 15-07 or SC 852: *07).
Page 795 UNIVERGE SV8100 Issue 5.0 Press Speaker to hang up. THIS PAGE INTENTIONALLY LEFT BLANK Park 1 - 785...
Page 796 Issue 5.0 UNIVERGE SV8100 1 - 786 Park...
Page 797: Power Failure Transfer
When the user hangs up, the phone automatically switches to Digital mode and the display returns to normal. Refer to the UNIVERGE SV8100 System Hardware Manual for the MDF Pin Numbers and PFT Connections (Power Failure Transfer Relay 1).
Page 798 Issue 5.0 UNIVERGE SV8100 A Power Fail circuit is required. The CD-4COTB has Power Failure circuits on the first two ports. The PZ-4COTx blade does not contain any Power Fail or Fax Branch Exchange circuits. Default Setting None System Availability...
Page 799 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-02-09 Analog Trunk Data Setup – Busy Use to set the basic options for 0 = Disable Tone Detection each analog trunk port. 1 = Enable...
Page 800 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 790 Power Failure Transfer...
Page 801: Prime Line Selection
UNIVERGE SV8100 Issue 5.0 Prime Line Selection Description Prime Line Selection allows a multiline terminal user to place or answer a call over a specific trunk by just lifting the handset. The user does not have to first press keys or dial codes. This simplifies handling calls on a frequently used trunk.
Page 802 Issue 5.0 UNIVERGE SV8100 Required Component(s) None Related Features Central Office Calls, Placing Direct Inward Dialing (DID) Direct Inward Line (DIL) Direct Inward System Access (DISA) Line Preference Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-05-01 Trunk Group –...
Page 803 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 14-07-01 Trunk Access Map Setup – Trunk For outgoing Prime Line selection, 0 = No access Port Number assign each Prime Line trunk to a 1 = Outgoing access...
Page 804 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 22-01-01 System Options for Incoming Use this option to determine if 0 = Intercom call Calls – Incoming Call Priority Intercom calls or trunk calls have priority answer priority when both are 1 = Trunk call priority ringing simultaneously.
Page 805 UNIVERGE SV8100 Issue 5.0 Operation To place a call on your Prime Line: Lift the handset. You hear dial tone on your Prime Line. To answer a call on your Prime Line: Lift the handset. Depending on your Line Preference programming, you either answer the Prime Line or get dial tone on the idle line appearance.
Page 806 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 796 Prime Line Selection...
Page 807: Private Line
An extension user can transfer their Private Line. If other users have hold access, the destination can answer the transferred Private Line and place it on Hold. NEC does not recommend assigning ringdown to a private line. Default Setting Disabled...
Page 808 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Stations Required Component(s) None Related Features Call Forwarding Central Office Calls, Placing Do Not Disturb Line Preference Prime Line Selection Programmable Function Keys Single Line Telephones Toll Restriction Transfer InMail 1 - 798...
Page 809 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-01-09 Basic Trunk Data Setup – Private Determine if a trunk should be 0 = Disable Private Line used as a normal (0) or private (1) Line (Normal) line.
Page 810 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Make sure extension has a line Line Key 1~48 key (e.g., 012) for the Private Line. 0~99 (Normal Function Code 851 by default) 00 ~...
Page 811 UNIVERGE SV8100 Issue 5.0 Operation To place a call on your Private Line: Press Private Line key and then press Speaker or lift the handset. Dial the number. To answer a call on your Private Line: Press Private Line key and then press Speaker or lift handset.
Page 812 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 802 Private Line...
Page 813: Programmable Function Keys
UNIVERGE SV8100 Issue 5.0 Programmable Function Keys Description Each multiline terminal has Programmable Function Keys. Programmable Function Keys simplify placing calls, answering calls and using certain features. You can customize the function of a multiline terminal programmable keys from each multiline terminal. Depending on your telephone style, you can have up to 48 Programmable Function keys.
Page 814 If a key is programmed as a DSS/One-Touch key for a station that is set for Call Forward All Calls or Do Not Disturb, the DSS/One-Touch key flashes. Refer to the UNIVERGE SV8100 Programming Manual for a complete list of Function Numbers. One-Touch keys programmed for Park Hold Service Code cannot be used to park calls without using Hold or Transfer.
Page 815 UNIVERGE SV8100 Issue 5.0 System Availability Terminals All Multiline Terminals Required Component(s) D16(LD)-R ADM Related Features Direct Station Selection (DSS) Console One-Touch Calling Speed Dial – System/Group/Station Programmable Function Keys 1 - 805...
Page 816 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign the functions of a multiline Line Key 1~48 terminal Programmable Function 0~99 (Normal Function Keys. When using Program Code 851 by default)
Page 817 Press the key you want to program. Enter the 2-digit key function, any additional information needed for the key and press Hold. For available functions codes refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual. To undefine a key, enter 00.
Page 818 UNIVERGE SV8100 Enter the 3-digit key function and any additional information needed for the key. For available functions codes, refer to Program 15-07 in the UNIVERGE SV8100 Programing Manual. To undefine a key, enter 000. When a key is programmed using service code 852, that key cannot be programmed with a function using the 851 code until the key is undefined (000).
Page 819: Pulse To Tone Conversion
UNIVERGE SV8100 Issue 5.0 Pulse to Tone Conversion Description An extension can use Pulse to Tone Conversion on trunk calls. Pulse to Tone Conversion lets a user change their extension dialing mode while placing a call. For systems in a Dial Pulse area, this permits users to access dial-up OCCs (Other Common Carriers –...
Page 820 Issue 5.0 UNIVERGE SV8100 Required Component(s) CD-4COTB, PZ-4COTF - OR - CD-4ODTA - OR - CD-CCTA Related Features Central Office Calls, Placing Multiple Trunk Types Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-02-01 Analog Trunk Data setup –...
Page 821: Q-Sig
Q-Sig Description A basic form of QSIG is provided to allow for desk to desk dialling between systems, incoming trunk routing across the QSIG link and, depending on connection method chosen, trunk breakout on the remote system. T Interface This is a PSTN interface to the local network S Interface This is an internal BRI (S-Bus) or PRI link.
Page 822 Issue 5.0 UNIVERGE SV8100 PINX This is the remote system to which the QSIG connection is connected. Configuration QSIG connection set as QT on originating system If the QSIG connection is intended to be set as QT the following would require to be configured:...
Page 823: Table 1-16 Overview Of Supported Qsig Standards
UNIVERGE SV8100 Issue 5.0 Conditions Some QSIG connections require the sending of a Connect Acknowledge IE. To enable this it may be necessary to enable command 10-03-22 on the PRI circuit configured for QSIG It may also be necessary to set the following commands:...
Page 824 Issue 5.0 UNIVERGE SV8100 Related Features Direct Inward Dialling (DID) / Direct Dial In (DDI). Central Office Calls- Answering F-route Department Groups ISDN Compatibility Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ISDN Line Mode Defines the setting of the PRI or 0 = Not set BRI for trunk or S0 connections.
Page 825 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 16-02-01 Department Group Assignment Assign the incoming trunk type for Department Groups for Extensions each trunk. 1-64 Priority 1-512 Default = All extensions in Department Group 1 with priority in port...
Page 826 Issue 5.0 UNIVERGE SV8100 DID Services for either ISDN – BRI or PRI Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type for Trunks 1~200 each trunk. 0 = Normal 1 = VRS (second...
Page 827 UNIVERGE SV8100 Issue 5.0 F-Route Program Program Name Description/Comments Assigned Data Number 11-01-01 System Numbering Set the system internal (Intercom) Refer to SV8100 numbering plan. The numbering Programming Manual plan assigns the first and second for a detailed digits dialed and affects the digits...
Page 828 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 44-02-03 Dial Analysis Table for F-Route If a Service Type is set to F-Route 1=Delete Digit = 0~255 Access – Additional Data in Program 44-02-02, set which (255 : Delete All Digits) F-Route table to be used.
Page 829 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 44-03-04 Dial Analysis Extension Table – If the received digits do not match Next Table Area Number (252) the digits set in tables 1~250, table (default = 0) number 252 is used refer to the next Extension Table Area (1~4) to be searched.
Page 830 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 44-05-09 F-Route Table – Maximum Digit Input the maximum number of 0~24 digits to send when using the (default = 0) F-Route. 44-05-11 F-Route – Network Specified For each F-Route table (1~500)
Page 831 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 44-09-01 Weekly Schedule for F-Route Define a weekly schedule for 1 = Sunday using F-Route day numbers 1~7 (Pattern 1~10) (1 = Sun, 7 = Sat), pattern (default Pattern = 1) numbers (1~10).
Page 832 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 822 Q-Sig...
Page 833: Redial Function
Users can also press Redial and dial a System Speed Dial bin number to access System Speed Dial. Conditions Redial List requires a display telephone. This feature is not supported on multiline cordless phones. UNIVERGE SV8100 telephones only support redial using Softkey or Navigation key. Default Setting Enabled System Availability...
Page 834 Issue 5.0 UNIVERGE SV8100 Programming None Operation To redial the last number dialed: For Aspire Telephones Only: Press Redial. REDIAL [#] / SYS is displayed along with the last dialed number. Press the up or down arrow to view the number to dial.
Page 835 UNIVERGE SV8100 Issue 5.0 Press Redial. Press the up and down arrow to view the number to dial. Press or press Speaker or lift the handset. To access a System Speed Dial bin: For Aspire Telephones Only: Press Redial. REDIAL [#] / SYS is displayed along with the last dialed number.
Page 836 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 826 Redial Function...
Page 837: Repeat Redial
UNIVERGE SV8100 Issue 5.0 Repeat Redial Description If a multiline terminal user places a trunk call that is busy or unanswered, they can have Repeat Redial try it again later on. The user does not continually have to try the number again – hoping it goes through.
Page 838 Issue 5.0 UNIVERGE SV8100 Related Features Automatic Route Selection Central Office Calls, Placing Last Number Redial Save Number Dialed Single Line Telephones Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for Repeat Line Key 1~48 Redial (code 29).
Page 839 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 21-08-03 Repeat Dial Setup – Repeat Dial Set how long the system waits for 0~64800 (seconds) Calling Timer the called party to answer after a (default = 30) Repeat Redial. If the called party...
Page 840 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 830 Repeat Redial...
Page 841: Reverse Voice Over
UNIVERGE SV8100 Issue 5.0 Reverse Voice Over Description While on a call, Reverse Voice Over lets a busy multiline terminal user make a private Intercom call to an idle co-worker. The idle co-worker can be at a multiline terminal or single line telephone. The busy user just presses a programmed Reverse Voice Over key to make a private call to a specified co-worker.
Page 842 Issue 5.0 UNIVERGE SV8100 Reverse Voice Over destination. If an extension user places a Reverse Voice Over to a busy destination extension, the system sets up a Voice Over. The Voice Over continues until the Reverse Voice Over key is pressed again.
Page 843 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for Reverse Line Key 1~48 Voice Over (code 47 + destination 0~99 (Normal Function extension). Code 851 by default)
Page 844 Issue 5.0 UNIVERGE SV8100 When the telephone is idle: To place a call to your Reverse Voice Over destination: Press your Reverse Voice Over key (Program 15-07 or SC 851: 47 + destination extension). You can optionally lift the handset after this step for privacy.
Page 845: Ring Groups
UNIVERGE SV8100 Issue 5.0 Ring Groups Description Ring Groups determine how trunks ring extensions. Generally, trunks ring extensions only if Ring Group programming allows. For example, to make a trunk ring an extension: Assign the trunk and the extension to the same Ring Group.
Page 846 Issue 5.0 UNIVERGE SV8100 Related Features Automatic Call Distribution (ACD) Automatic Route Selection Direct Inward Line (DIL) Direct Inward Dialing (DID) Direct Inward System Access (DISA) ISDN Compatibility Night Service Programmable Function Keys Guide to Feature Programming Program Program Name...
Page 847 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 22-02-01 Incoming Call Trunk Setup Assign the incoming trunk type (0) Day/Night Mode: 1~8 for each trunk. There is one item 0 = Normal for each Night Service Mode.
Page 848 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 22-11-05/ DID Translation Table - Transfer For each DID Translation Table, 0 (No Setting) Target 1 & 2 assign the destination for DID 1~100 (Incoming Ring Intercept. The destination can be a...
Page 849 UNIVERGE SV8100 Issue 5.0 Trunks ring the same in the day as at night. MLT has trunk appearances not CAP keys. Ring Groups 1 - 839...
Page 850 Issue 5.0 UNIVERGE SV8100 Program 22-04 : Incoming Extension Ring Group Assignment Ring Group > Trunk 1 Trunk 2 Trunk 3 X = Trunk assigned to indicated Ring Group Make the same PRG 22-04 entry for all Night Service modes.
Page 851: Ringdown Extension (Hotline), Internal/External
UNIVERGE SV8100 Issue 5.0 Ringdown Extension (Hotline), Internal/External Description With a Ringdown Extension, a user can call another extension, outside number, or Speed Dialing number by just lifting the handset. The call automatically goes through – there is no need for the user to dial digits or press additional keys.
Page 852 Issue 5.0 UNIVERGE SV8100 not occur if the Hotline Start Timer is set longer than the Extension Dial Tone Timer. The @ code is used to make an outbound call automatically forward to a DISA Trunk or to VM Auto Attendant. This code can be used only on ISDN outbound calls. Internal calls and analog outbound calls are not supported.
Page 853 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 20-06-01 Class of Service for Extensions Assign a Class of Service (1~15) Day Night/Mode: 1~8 to an extension. Class of Service of Extensions (1~15) Default:...
Page 854 Issue 5.0 UNIVERGE SV8100 If you want to place a trunk call, press a line key before lifting the handset. Depending on the setting of your ringdown timer, you may be able to dial an Intercom call before your ringdown goes through.
Page 855: Room Monitor
UNIVERGE SV8100 Issue 5.0 Room Monitor Description Room Monitor lets an extension user listen to the sounds in a co-workers area. For example, the receptionist could listen for sounds in the warehouse when it is left unattended. To use Room Monitor, the initiating extension and the receiving extension must activate it.
Page 856 Issue 5.0 UNIVERGE SV8100 Function keys (code 39). Room Monitor for single line telephones can be used with the Hotel/Motel feature. For a multiline terminal, Room Monitor requires uniquely programmed function keys. Default Setting Disabled System Availability Terminals Multiline Terminals and Single Line Telephones...
Page 857 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Level Program Program Name Description/Comments Assigned Data Number 11-14-17 Service Code Setup (for Hotel) – Customize the service code (770 MLT, SLT Hotel Room Monitor by default) to be used for Room (default = 770) Monitor.
Page 858 Issue 5.0 UNIVERGE SV8100 Multiline Room Monitoring 1 - 848 Room Monitor...
Page 859 UNIVERGE SV8100 Issue 5.0 Single Line Telephone Room Monitoring Operation You must activate Room Monitor at the extension initiating the monitor and at the extension you want to monitor. You can only listen to one extension at a time. Multiline Terminals: To activate Room Monitor from an idle Multiline Terminal (initiating extension): Press the Room Monitor key (Program 15-07 or SC 851: 39).
Page 860 Issue 5.0 UNIVERGE SV8100 Dial the number of extension you want to monitor. You can place and answer other calls while Room Monitor is active. To activate Room Monitor from an idle Multiline Terminal (extension to be monitored): Press Room Monitor key (Program 15-07 or SC 851: 39).
Page 861: Save Number Dialed
Save Number Dialed Description Save Number Dialed allows an extension user to save their last outside number dialed and easily redial it later on. For example, an extension user can recall a busy or unanswered number without manually dialing the digits. The system retains the saved number until the user stores a new one in its place or clears the stored one.
Page 862 Issue 5.0 UNIVERGE SV8100 Related Features Automatic Route Selection Central Office Calls, Placing Dial Tone Detection Last Number Redial Programmable Function Keys Repeat Redial Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-12-13 Service Code Setup (for Service...
Page 863 UNIVERGE SV8100 Issue 5.0 Hookflash. Dial 815. To redial a saved number: Multiline Terminal Press an idle trunk line key. This selects a specific trunk for the call. Press the Save Number Dialed key (Program 15-07 or SC 851: 30).
Page 864 Issue 5.0 UNIVERGE SV8100 To view the number you have saved from a multiline terminal with a display: Press the Save Number Dialed key (Program 15-07 or SC 851: 30). The stored number displays for 10 seconds. The stored number dials out if you:...
Page 865: Secretary Call (Buzzer)
UNIVERGE SV8100 Issue 5.0 Secretary Call (Buzzer) Description Secretary Call lets two co-workers alert each other without disturbing their work. To have Secretary Call, both co-workers must have multiline terminals with Secretary Call buzzer keys. When a user presses their buzzer key, the system alerts the called extension by sending a splash tone and flashing the called extension buzzer key.
Page 866 Issue 5.0 UNIVERGE SV8100 Related Features Programmable Function Keys Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign function keys for Secretary Line Key 1~48 Call buzzer (code 41 + the 0~99 (Normal Function destination extension number).
Page 867 UNIVERGE SV8100 Issue 5.0 To check to see who left you a Secretary Call: Do not lift the handset. Press the Help key. Press the Secretary Call key that flashed. Press the Exit key. To answer your Secretary Call indication: Place an Intercom call to the extension that called you.
Page 868 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 858 Secretary Call (Buzzer)
Page 869: Secretary Call Pickup
UNIVERGE SV8100 Issue 5.0 Secretary Call Pickup Description Secretary Call Pickup lets a multiline terminal user easily reroute calls intended for a co-worker to themselves. By pressing a Secretary Call Pickup key, the user can have all calls to a co-worker’s telephone ring or voice-announce theirs instead.
Page 870 Issue 5.0 UNIVERGE SV8100 Related Features Call Forwarding with Follow Me Programmable Function Keys Secretary Call (Buzzer) Single Line Telephones Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign function keys for Secretary Line Key 1~48 Call Pickup (42 + boss ext).
Page 871: Selectable Display Messaging
UNIVERGE SV8100 Issue 5.0 Selectable Display Messaging Description An extension user can select a preprogrammed Selectable Display Message for their extension. Display multiline terminal callers see the selected message when they call the user’s extension. Selectable Display Messaging provides personalized messaging. For example, an extension user could select the message GONE FOR THE DAY.
Page 872 Issue 5.0 UNIVERGE SV8100 when Selectable Display Messaging is canceled. Default Setting Enabled System Availability Terminals All Multiline Terminals with Display Required Component(s) None Related Features Do Not Disturb Programmable Function Keys 1 - 862 Selectable Display Messaging...
Page 873 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-14 Service Code Setup (for Setup/ Define the service code to be used Entry Operation) – Text Message when setting a text message. (default = 836)
Page 874 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-19 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Supplementary Service) – extension user ability to use 1 = On Selectable Display Messaging Selectable Display Messaging.
Page 875: Table 1-18 Selectable Display Message - Character Entry Chart
UNIVERGE SV8100 Issue 5.0 Table 1-18 Selectable Display Message – Character Entry Chart Use this keypad digit . . . When you want to. . . Enter characters: ¥ ‘ > < Enter characters: A-C, a-c, 2. Enter characters: D-F, a-f, 3.
Page 876 Issue 5.0 UNIVERGE SV8100 Enter message number + enter digits to append (if needed) + Speaker to hang up. Skip the remaining steps. (Optional for messages 1~8 and 10.) Dial the digits you want to append to the message. You can append messages 1~8 and 10 with digits (e.g., the time when you will be back). Enter the time in 24-hour format.
Page 877: Selectable Ring Tones
UNIVERGE SV8100 Issue 5.0 Selectable Ring Tones Description An extension user can change the way trunks or internal calls ring their telephone. Selectable Ring Tones allow an extension user to set up unique ringing for their calls. This is important in a crowded work area where several telephones are close together.
Page 878 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-20 Service Code Setup (for Setup/ If required, change the service Entry Operation) – Change code used for changing the (default = 820) Incoming CO and ICM Ring...
Page 879 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-10-01 Incoming Virtual Extension Ring When two or more virtual 0 = Tone Pattern 1 Tone Order Setup extensions are set on a function 1 = Tone Pattern 2...
Page 880 Issue 5.0 UNIVERGE SV8100 To listen to the incoming ring choices: Press idle Speaker. Dial 811. Dial 1 to listen to Intercom ring; 2 to listen to trunk ring. For Intercom Ring: Dial the code for the ring pattern you want to hear (1~8).
Page 881: Serial Call
UNIVERGE SV8100 Issue 5.0 Serial Call Description Serial Call transfers a call so it automatically returns to the transferring extension. Serial Calling saves transferring steps between users. For example, a Customer Service Representative (CSR) has a client on the telephone who needs technical advice. The CSR wants to send the call to Technical Service, but needs to advise the client of certain costs when Technical Service is done.
Page 882 Issue 5.0 UNIVERGE SV8100 Related Features Programmable Function Keys Transfer Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 15-02-05 Multiline Telephone Basic Data Use this option to set the operating 0 = Transfer Setup – Transfer Key Operation...
Page 883 UNIVERGE SV8100 Issue 5.0 Operation To place a Serial Call to a co-worker: Place or answer a call. Press Hold or Transfer. Dial co-worker’s extension number. Co-worker must lift the handset to respond to your announcement. Press the Serial Call key (Program 15-07 or SC 851: 43).
Page 884 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 874 Serial Call...
Page 885: Single Line Telephones
UNIVERGE SV8100 Issue 5.0 Single Line Telephones Description The system is compatible with Dial Pulse and DTMF analog single line telephones (SLTs). You can install single line telephones as On-Premise or Off-Premise extensions. Single line telephone users can dial codes to access many of the features available to multiline terminal users. With single line telephones, you can have your system simulate PBX type operation.
Page 886 Issue 5.0 UNIVERGE SV8100 Default Setting Single line telephones function as soon as they are installed and properly programmed. System Availability Terminals DTR-1-1 DTH-1HM-1 DTH-1-1 DTP-1-2 DTP-1HM-2 DTR-1R-2 Required Component(s) Any LCA Blade 1 - 876 Single Line Telephones...
Page 887 UNIVERGE SV8100 Issue 5.0 Related Features Single line telephone users have access to the following features: Speed Dialing Account Codes Alarm Automatic Route Selection Barge-In Call Forwarding Call Forwarding with Follow Me Call Forwarding/DND Override Call Waiting/Camp-On Callback Central Office Calls, Answering...
Page 888 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (DLCA PKG Setup) – Program all on-premise single line 0 = Not set Terminal Type (B1) telephones with circuit type 2. Set...
Page 889 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-03-05 Single Line Telephone Basic Do Not Change Default Entry as 0 = Off Data Setup – Trunk Polarity DTMF issues may arise with voice 1 = On Reverse mail.
Page 890 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-03-02 System Options for Single Line Use this option to define whether 0 = Do not ignore (No) Telephones – Ignore Received the system should receive dial 1 = Ignore (Yes)
Page 891 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-15-03 Ring Cycle Setup – Incoming Define the ringing cycle (1~13) for Ringing Cycle = 1~13 Internal Call ICM calls. (default = 12) 20-15-05 Ring Cycle Setup – DID/DDI...
Page 892 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-03 DTMF Tone Receiver Setup – Use this option to define the 0~15 Min. detect level minimum detection level for DTMF detect level 0: Tone Receiver. –10dBm(0) to –25dBm(15) detect level 1: –15dBm(0) to –...
Page 893 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-04 DTMF Tone Receiver Setup – Use this option to define the 0~15 Max. detect level maximum detection level for detect level 0: 0dBm(0) DTMF Tone Receiver. to –15dBm(15) detect level 1: –5dBm(0) to –...
Page 894 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-05 DTMF Tone Receiver Setup – Use this option to define the Forward twist level forward twist level for DTMF Tone (1dB ~ 10dB) Receiver. default: Type 1 = 5 (6dBm)
Page 895 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-04-04 Call Progress Tone Detector Use this option to set No Tone 0~255 (30+30- Setup – No tone time Time. 7680ms) default: Type 1 (DT) – 132 (3990ms) Type 2 (BT) – 132 (3990ms) Type 3 (RBT) –...
Page 896 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 886 Single Line Telephones...
Page 897: Slt Adapter
UNIVERGE SV8100 system. Conditions A maximum of 368 SLTII(1)-U( ) ADPs can be used in the UNIVERGE SV8100 system. Dial Pulse and Dual-Tone Multifrequency Single Line Telephones are supported. The SLTII(1)-U( ) ADP does not support voice mail.
Page 898 Issue 5.0 UNIVERGE SV8100 Cordless Telephone Connection Single Line Telephones Guide to Feature Programming The items highlighted in gray are read only and cannot be changed. Program Program Name Description/Comments Assigned Data Number 10-03-01 ETU Setup (DLCA PKG Setup) –...
Page 899 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-01 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Manual extension for manually Switching 1 = On Night Service Enabled...
Page 900 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-07-15 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – VRS extension for dialing Service Code 1 = On General Message Record/Delete...
Page 901 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-08-02 Class of Service Options Turns off (0) or on (1) outgoing 0 = Off (Outgoing Call Service) – Trunk trunk calling for the extension. 1 = On Outgoing Calls...
Page 902 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-08-13 Class of Service Options Determine if the ISDN calling line 0 = Off (Outgoing Call Service) – ISDN identity presentation and 1 = On CLIP screening indicators are to be (default = 0 for allowed.
Page 903 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-09-01 Class of Service Options Turns Off (0) or On (1) the 0 = Off (Incoming Call Service) – extension ability to receive a 1 = On Second Call for DID/DISA/DIL/...
Page 904 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-10-02 Class of Service Options Turn off or on Group Call Pickup 0 = Off (Answer Service) – Group Call for calls ringing outside a group 1 = On Pickup (Another Group) (Service Code 869).
Page 905 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-11-03 Class of Service Options (Hold/ In an extension Class of Service, 0 = Off Transfer Service) – Call turn On (1) or Off (0) the ability of 1 = On...
Page 906 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-11-14 Class of Service Options (Hold/ Turns Off (0) or On (1) the 0 = Off Transfer Service) – Trunk-to-Trunk Transfer 1 = On Trunk-to-Trunk Transfer Restriction. If enabled,...
Page 907 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-11-24 Class of Service Options (Hold/ Set the hold type when a trunk call 0 = Non Exclusive Hold Transfer Service) – Trunk Park is put on hold by an extension.
Page 908 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-07 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Supplementary Service) – extension ability to leave Message 1 = On Message Waiting Waiting.
Page 909 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-17 Class of Service Options In an extension Class of Service, 0 = Off (Supplementary Service) – turn On (1) or Off (0) the Barge-In 1 = On Barge-In Tone/Display (Intrusion (Intrusion) Tone.
Page 910 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-13-27 Class of Service Options If set to 1, a busy extension can be 1 = On (Supplementary Service) – Busy called, while someone is talking on 0 = Off on Seizing Virtual Extension a virtual extension key.
Page 911 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-13-39 Class of Service Options Turn off or on the ACD Queue 0 = Off (Supplementary Service) – ACD Status Display for an extension 1 = On Queue Status Display Class of Service.
Page 912 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-14-01 Class of Service Options for For Tie Lines, enable or disable 0 = Off DISA/E&M – First Digit the ability to absorb (ignore) the 1 = On Absorption (Delete First Digit first incoming digit.
Page 913 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-14-11 Class of Service Options for In an extension Class of Service, 0 = Off DISA/E&M – DISA/Tie Trunk enable (1) or disable (0) a DISA or 1 = On...
Page 914 Issue 5.0 UNIVERGE SV8100 Dial the Trunk Access Code for the applicable trunk. Dial the applicable number. Hang up. To initiate a conference with a call in progress: Provide hookflash and dial 826. Dial the applicable number and wait for the party to answer.
Page 915: Softkeys
UNIVERGE SV8100 Issue 5.0 Softkeys Description Each display telephone provides interactive softkeys for intuitive feature access. It is no longer necessary to remember feature codes to access the telephone advanced features because the function of the softkeys change as the user processes calls.
Page 916 Issue 5.0 UNIVERGE SV8100 Related Features Directory Dialing Volume Controls Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-13 Service Code Setup (for Setup/ Used to customize the service Entry Operation) – Display code used to select the display...
Page 917: Speed Dial - System/Group/Station
UNIVERGE SV8100 Issue 5.0 Speed Dial – System/Group/Station Description Speed Dialing gives an extension user quick access to frequently called numbers. This saves time, for example, when calling a client with whom they deal often. Instead of dialing a long telephone number, the extension user just dials the Speed Dialing code.
Page 918 Issue 5.0 UNIVERGE SV8100 Storing a Flash To enhance compatibility with connected Centrex and PBX lines, Speed Dialing bin can have a stored Flash command. For example, storing 9 Flash 926 5400 causes the system to dial 9, flash the line and then dial 926 5400.
Page 919 UNIVERGE SV8100 Issue 5.0 System Availability Terminals All Terminals Required Component(s) None Related Features Account Code Entry Automatic Route Selection Central Office Calls, Placing Code Restriction Dial Tone Detection One-Touch Calling PBX Compatibility Programmable Function Keys Single Line Telephones Trunk Group Routing Speed Dial –...
Page 920 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-09-01 DTMF and Dial Tone Circuit If dial tone detection is enabled, be 0 = Common Use Setup sure to allocate at least one circuit...
Page 921 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 13-02-01 Group Speed Dialing Bins Designates the starting bin 01~64 number the system uses for Group (default not assigned) Speed Dialing. 13-03-01 Speed Dialing Group For Group Speed Dialing, assign...
Page 922 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 13-04-08 Memo 1 Define Memo Display information Maximum of 28 digits. tied to Common Speed Dial bin or (default - not assigned) Telephone Book which match with incoming Caller ID. This will be displayed in LCD Line 1.
Page 923 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 15-07-01 Programmable Function Keys Assign a function key for System Line Key 1~48 Speed Dialing (27) or Group 0~99 (Normal Function Speed Dialing (28). You can Code 851 by default)
Page 924 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 30-03-01 DSS Console Key Assignment For DSS Console Chaining, Key Number assign an Speed Dialing Service 001~500 Code (or ) plus a 2-digit bin 0~99 (General number to a DSS Console key.
Page 925 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-03 DTMF Tone Receiver Setup – Use to define the minimum detect 0~15 Min. detect level levels for the DTMF Tone detect level 0: Receiver. –10dBm(0) to –25dBm(15) detect level 1: –15dBm(0) to –...
Page 926 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-03-04 DTMF Tone Receiver Setup – Use to define the maximum detect 0~15 Max. detect level levels for the DTMF Tone detect level 0: 0dBm(0) Receiver. to –15dBm(15) detect level 1: –5dBm(0) to –...
Page 927 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-03-05 DTMF Tone Receiver Setup – Use to define the forward twist 0~9 (1dB ~ 10dB) Forward twist level levels for the DTMF Tone [default: Type 1~5 = Receiver.
Page 928 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 80-04-03 Call Progress Tone Detector Use to define the S/N ratio for the 0~4 (0dB ~ -20dB) Setup – S/N Ratio Call Progress Tone Detector. default: Type 1 (DT) – 4 (-20dB) Type 2 (BT) –...
Page 929 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 80-04-08 Call Progress Tone Detector Use to define the off minimum time 1~255 (30+30- Setup – OFF minimum time for the Call Progress Tone 7680ms) Detector. default: Type 1 (DT) – 1 (60ms) Type 2 (BT) –...
Page 930: Table 1-19 Keys For Entering Names
Issue 5.0 UNIVERGE SV8100 Table 1-19 Keys for Entering Names Use this keypad digit . . . When you want to. . . Enter characters: ¨ Æ 1 @ [ ¥ ] ^ _ ` { | } Á À Â Ã Ç É Ê ì ó...
Page 931 UNIVERGE SV8100 Issue 5.0 Dial the System Speed Dialing storage code. Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a specific Trunk Group for the call. If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.
Page 932 Issue 5.0 UNIVERGE SV8100 For System Speed Dialing, press Redial. Dial the Speed Dialing Code (e.g., common code 001). If the entire stored number is too long for your telephone display, press to see the rest of the number. - OR - For Group Speed Dialing, press the Group Speed Dialing key.
Page 933 UNIVERGE SV8100 Issue 5.0 Key for Entering Names (Continued) Use this keypad When you want to. . . digit . . . Enter characters: W-Z, w-z, 9. Enter characters: α ε θ “ & ’ ) ô Õ ú ä ö ü...
Page 934 Issue 5.0 UNIVERGE SV8100 To dial a Station Speed Dialing number (Multiline Terminal): Press Speaker. Dial 761 (default Service Code). - OR - Press the System Speed Dialing key (Service Code 851: 27). To preselect, press a line key in step 1 (instead of Speaker).
Page 935: Speed Dial - Telephone Book
UNIVERGE SV8100 Issue 5.0 Speed Dial – Telephone Book Description Speed Dial – Telephone Book is a part of the Speed Dialing system. A maximum of 100 Telephone Books is supported per system. Individual extensions can be assigned up to two Telephone Books.
Page 936 Issue 5.0 UNIVERGE SV8100 Related Features Speed Dial – System/Group/Station Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-56 Service Code Setup (for Setup/ Password to unlock telephone MLT, SLT Entry Operation) – Telephone book. (default = no setting)
Page 937 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 13-07-04 Telephone Book Dial Number Assign each entry in the telephone 1~20 and Name – Group Number book to a group if needed. (default = 1) In the telephone book you...
Page 938 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 15-19-06 System Telephone Book Setup Allows the book to be locked/ 0 = Off for Extension – Locking of unlocked. When locked, the 1 = On Telephone Book password must be dialed to unlock...
Page 939 UNIVERGE SV8100 Issue 5.0 After selecting the book, choose one of the following search types. To scroll the entries in the book, press Up or Down on the cursor pad. Once you reach the last entry on the page, the display advances to the next page. To select one of the entries, press the associated number on the dial pad or the center cursor pad button.
Page 940 Issue 5.0 UNIVERGE SV8100 If you want to change the Telephone Book Entry Name, type the new name using the telephone dial pad keys and press the center button on the cursor pad. To accept the name change, press the center button on the cursor pad again. If you do not want to change the Telephone Book Entry Name, press the center button on the cursor pad again.
Page 941 UNIVERGE SV8100 Issue 5.0 Press the softkey associated with the first or second book. - OR - Press the Right cursor key. Search to select the telephone name, telephone number or registry entry (0~299) to change. Press the Dial softkey to dial the selected number.
Page 942 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 932 Speed Dial – Telephone Book...
Page 943: Station Hunt
UNIVERGE SV8100 Issue 5.0 Station Hunt Description After calling a busy extension, a call immediately hunts to the next available member of the Hunt Group (Department Group). The caller does not have to hang up and place another Intercom call if the first extension called is unavailable.
Page 944 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-16-01 1 Digit Service Code Setup - Step Assign a single digit for step call SLT/MLT Call Default not assigned 16-01-03 Department Group Basic Data...
Page 945: Station Message Detail Recording
UNIVERGE SV8100 Issue 5.0 Station Message Detail Recording Description Station Message Detail Recording (SMDR) provides a record of the system trunk calls. Typically, the record outputs to a customer-provided printer, terminal or SMDR data collection device. SMDR allows you to monitor the usage at each extension and trunk. This makes charge-back and traffic management easier.
Page 946 Issue 5.0 UNIVERGE SV8100 Duration Monitoring SMDR can include calls of any duration, or only those that last longer than the interval you specify. If you want to keep track of all trunk activity, use a short duration. To keep track of only significant usage, use a longer duration.
Page 947 For example, with Program 35-01-09 = 0 (Format for NA) and Program 35-02-17 = 1 (Caller ID Name), if a call is received with the Caller ID Name of NEC Infrontia Corporation (24 characters), the following SMDR record is displayed:...
Page 948: Table 1-20 Smdr Report Definitions
Issue 5.0 UNIVERGE SV8100 Table 1-20 SMDR Report Definitions Report Headings Definitions Call Record Number SMDR record number (consecutive) CLASS Type of call (see Class Definitions below) TIME Time call placed or answered. (For Transferred calls, shows time user picked up Transfer.)
Page 949: Table 1-21 Smdr Report Format With Program 35-02-14 Set To '0'
UNIVERGE SV8100 Issue 5.0 Table 1-21 SMDR Report Format with Program 35-02-14 Set to ‘0’ Character Position Field Definition Header Line 1 1~60 Spaces 61~70 MM/DD/YYYY Space 72~75 PAGE Space 77~79 Report page number (e.g., 001) CR & LF Carriage return and line feed...
Page 950: Table 1-21 Smdr Report Format With Program 35-02-14 Set To '0
Issue 5.0 UNIVERGE SV8100 Table 1-21 SMDR Report Format with Program 35-02-14 Set to ‘0’ (Continued) Character Position Field Definition Space Time in 24 hour clock (HH:MM) 6~10 Space 12~21 LINE Space 23~30 Call Duration (HH:MM:SS) Space 32~41 Station number or name...
Page 951: Table 1-22 Smdr Report Format With Program 35-02-14 Set To '1
UNIVERGE SV8100 Issue 5.0 Table 1-22 SMDR Report Format with Program 35-02-14 Set to ‘1’ (Continued) Character Position Field Definition 12~15 DATE 16~17 Spaces 18~21 LINE Space 23~30 DURATION 31~32 Spaces 33~39 STATION 40~44 Spaces 45~51 DIALLED Space 53~59 No./CLI...
Page 952: Table 1-23 Smdr Summary Report
Issue 5.0 UNIVERGE SV8100 Table 1-22 SMDR Report Format with Program 35-02-14 Set to ‘1’ (Continued) Character Position Field Definition Space Account number or NO ANSWER 64~79 Table 1-23 SMDR Summary Report OUTGOING CALL/COST SUMMARY FOR DAY OF nn/nn/nn TOTAL NO. OF OUTGOING PSTN CALLS: 0 TOTAL NO.
Page 953 When Program 35-02-18 is set to 1, the first and second lines are sometimes separated. When the buffer is full, the overflowed data may not be shown. The special characters used in the UNIVERGE SV8100 system cannot be output to the SMDR – they are converted to _.
Page 954 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 10-12-01 CD-CP00 Network Setup – IP Assign the IP Address. 0.0.0.0 ~ Address 126.255.255.254 128.0.0.1 ~ 191.254.255.254 192.0.0.1 ~ 223.255.255.254 (default = 192.168.0.10) 10-20-01 LAN Setup for External...
Page 955 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-18 Class of Service Options Used to determine if Accumulated 0 = Off (Administrator Level) – SMDR Extension Data is included in the 1 = On Printout Accumulated Extension SMDR report for each COS.
Page 956 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 35-01-07 SMDR Options – Minimum Ring Enter how long an unanswered 0~65535 (sec) Time (For Incoming Calls) call must ring (1~65535 seconds) (0 = All) before SMDR logs it as No (default = 0) Answer).
Page 957 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 35-02-10 SMDR Output Options – All Determine if the All Lines Busy 0 = Not Displayed Lines Busy (ALB) Output (ALB) indication should be 1 = Displayed displayed. (default = 0) 35-02-12 SMDR Output Options –...
Page 958 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 35-02-18 SMDR Output Options – Print Select whether to display up to 16 0 = Normal Mode for Caller Name of characters of the Caller Name on 1 = Line Feed...
Page 959 UNIVERGE SV8100 Issue 5.0 SMDR flowcharts are located on the following pages. SMDR with a CD-CP00 Connection Ethernet Station Message Detail Recording 1 - 949...
Page 960 Issue 5.0 UNIVERGE SV8100 SMDR Flowchart 1 - 950 Station Message Detail Recording...
Page 961 UNIVERGE SV8100 Issue 5.0 SMDR Flowchart (Continued) Station Message Detail Recording 1 - 951...
Page 962 Issue 5.0 UNIVERGE SV8100 SMDR Flowchart (Continued) 1 - 952 Station Message Detail Recording...
Page 963 UNIVERGE SV8100 Issue 5.0 SMDR Flowchart (Continued) Operation Once installed and programmed, SMDR operation is automatic. Station Message Detail Recording 1 - 953...
Page 964 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 954 Station Message Detail Recording...
Page 965: Station Name Assignment - User Programmable
UNIVERGE SV8100 Issue 5.0 Station Name Assignment – User Programmable Description This feature allows a user to program the Station Name for their telephone extension or any extension within the system. The name is displayed on the multiline terminal LCD when an intercom or K-CCIS call is placed.
Page 966 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-22 Service Code Setup (for Setup/ Use to customize the extension Entry Operation) – Extension name programming used for (default = 800) Name Programming registration and setup.
Page 967: Table 1-24 Keys For Entering Names
UNIVERGE SV8100 Issue 5.0 Press Hold. Press Speaker to hang up. To program any extension name: Press Speaker. Dial 800 - OR - Press the Extension Name Change key (Program 15-07 or SC 851: 55). Enter the extension number to be named.
Page 968 Issue 5.0 UNIVERGE SV8100 Table 1-24 Keys for Entering Names (Continued) Use this keypad digit . . . When you want to. . . Conf Clear the character entry one character at a time. Hold Clear all the entries from the point of the flashing cursor and to the right.
Page 969: Station Relocation
UNIVERGE SV8100 Issue 5.0 Station Relocation Description Station Relocation allows a station to be moved from one location to another, without having to reprogram the station data. The stations features and extension number are the same after it is moved to the new location.
Page 970 Issue 5.0 UNIVERGE SV8100 System Availability Terminals All Multiline Terminals and Single Line Telephones Required Component(s) None Related Features None Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-15-12 Service Code Setup, Ext. Data Swap = xxx (service...
Page 971 UNIVERGE SV8100 Issue 5.0 Program 15-03 Single Line Telephone Basic Data Setup Program 15-06 Trunk Access Map for Extensions Program 15-07 Programmable Function Keys Program 15-08 Incoming Virtual Extension Ring Tone Setup Program 15-09 Virtual Extension Ring Assignment Program 15-10 Incoming Virtual Extension Ring Tone Order Setup...
Page 972 Issue 5.0 UNIVERGE SV8100 Operation To exchange two terminals: Pick up the handset or press Speaker. Dial the Extension Data Swap Service Code – not assigned at default (Program 11-15-12). Dial the Extension Data Swap Password – not assigned at default (Program 92-05-01).
Page 973: Synchronous Ringing
UNIVERGE SV8100 Issue 5.0 Synchronous Ringing Description Synchronous Ringing synchronizes CO/PBX incoming ringing with the incoming ringing pattern from a Central Office. Conditions When the multiline terminal is ringing at Secondary Extension (SE)/Virtual Extension (VE) key, Synchronous Ring works. Synchronous Ringing is not supported for Tie/DID incoming calls, Off-Hook Ringing, or CO/ PBX Ring Transfers.
Page 974 Issue 5.0 UNIVERGE SV8100 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 14-02-17 Analog Trunk Data Setup – Sync. Enable or disable per trunk. 0 = Disable Ringing 1 = Enable (default) 20-15-01 Ring Cycle Setup – Normal...
Page 975: Tandem Ringing
Tandem Ringing Description Tandem Ringing allows an extension user to have two telephones with one telephone number. For example, extension 205 (the master telephone) sets Tandem Ringing with extension 206. When extension 205 receives an incoming call, both extensions 205 and 206 ring.
Page 976 Issue 5.0 UNIVERGE SV8100 telephone settings instead. To transfer calls between the two Tandem Ringing stations, a System Park Orbit should be used. A SIP terminal cannot be the Master or Slave telephone. Default Setting Disabled System Availability Terminals Master Telephone:...
Page 977 UNIVERGE SV8100 Issue 5.0 Guide to Feature Programming Program Program Name Description/Comments Assigned Data Number 11-11-41 Service Code Setup (for Setup/ Define a service code to be used MLT, SLT Entry Operation) – Tandem to set up Tandem Ringing. (default = 744)
Page 978 Issue 5.0 UNIVERGE SV8100 Terminals indicate TANDEM IN USE in the display and single line telephone users hear a busy signal when the handset is lifted. To cancel Tandem Ringing: Dial 744 -OR- Press the Tandem Ringing key (Program 15-07 or SC 851: 80).
Page 979: Tandem Trunking (Unsupervised Conference)
UNIVERGE SV8100 Issue 5.0 Tandem Trunking (Unsupervised Conference) Description Tandem Trunking allows an extension user to join two outside callers in a Trunk-to-Trunk Conference. The extension user can then drop out of the call, leaving the trunks in an Unsupervised Conference. The extension user that established the conference is not part of the conversation.
Page 980 Issue 5.0 UNIVERGE SV8100 Method D - Automatic Tandem Trunking Setup to Speed Dial Number This method allows an extension user to easily set up an Unsupervised Conference with a call they have placed on Hold. A Class of Service option is available, which allows or denies an extension user from automatically setting up a Conference/Tandem Trunking call after hanging up the telephone.
Page 981 UNIVERGE SV8100 Issue 5.0 the opposite side trunk. With an ISDN trunk, Program 14-01-25 must be enabled to detect the Continue/Disconnect code. The Continue/Disconnect code is not accepted while dialing a trunk. Continue/Disconnect codes do not work if all receivers are busy.
Page 982 Issue 5.0 UNIVERGE SV8100 Related Features Call Forwarding, Off-Premise Central Office Calls, Answering Central Office Calls, Placing Direct Inward System Access (DISA) Guide to Feature Programming Method A – Tandem Trunking from Conference Program Program Name Description/Comments Assigned Data Number...
Page 983 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-11 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Forced extension to use Forced Trunk 1 = On Trunk Disconnect (analog trunk Disconnect.
Page 984 Issue 5.0 UNIVERGE SV8100 Method B – Tandem Trunking with Transfer Key Program Program Name Description/Comments Assigned Data Number 14-01-04 Basic Trunk Data Setup – Select the Transmit CODEC gain 1~63(-15.5dB ~ Transmit Gain Level for level used by the trunk when it is +15.5dB in 0.5dB...
Page 985 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 24-02-07 System Options for Transfer – This timer starts when a trunk 0~64800 (seconds) Trunk-to-Trunk Transfer Release begins talking with another trunk (default = 1800 Warning Tone (for example: Trunk-to-Trunk...
Page 986 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 20-07-11 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Forced extension to use Forced Trunk 1 = On Trunk Disconnect (analog trunk Disconnect.
Page 987 UNIVERGE SV8100 Issue 5.0 Method D – Tandem Trunking to Speed Dial Number Program Program Name Description/Comments Assigned Data Number 11-10-06 Service Code Setup (for System If the default service code (833) for Administrator) – Setting the enabling Automatic Tandem...
Page 988 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 13-04-04 Speed Dialing Number and Name Use to store transfer destination If Transfer mode is – Transfer Destination Number number data in the Speed Dialing (Refer to 13-04-03): areas.
Page 989 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 20-07-11 Class of Service Options Turns Off (0) or On (1) an 0 = Off (Administrator Level) – Forced extension to use Forced Trunk 1 = On Trunk Disconnect (analog trunk Disconnect.
Page 990 Issue 5.0 UNIVERGE SV8100 Program Program Name Description/Comments Assigned Data Number 0~9, 20-28-01 Trunk to Trunk Conversation – When Program 14-01-25 is Conversation Continue Code enabled, determine the 1-digit (default not assigned) code the user should dial (0~9, ) to extend the conversation length for the time defined in 20-28-03.
Page 991 UNIVERGE SV8100 Issue 5.0 Program Program Name Description/Comments Assigned Data Number 25-07-07 System Timers for VRS/DISA – Determine the time a DISA caller 0~64800 (seconds) Long Conversation Warning can talk before the Long (default = 3600 Tone Time Conversation tone is heard seconds) (0~64800 seconds).
Page 992 Issue 5.0 UNIVERGE SV8100 Press Hold and dial 753 or the service code set for Unsupervised Conference/Tandem Trunking in Program 11-12-57. The line keys for the trunks blink green as long as the Unsupervised Conference continues. To end the Tandem Call: Press either flashing line key.
Page 993 UNIVERGE SV8100 Issue 5.0 Method C – Tandem Trunking on Hang up To set up a Tandem Call: Place or answer first trunk call. Press Hold to place the first trunk call on hold. Place a second trunk call. Hang up.
Page 994 Issue 5.0 UNIVERGE SV8100 Hang up. To disconnect the Conference, Forced Trunk Disconnect (i.e., Press the line key or 805 plus the trunk number + 724 or the service code set of Forced Trunk Disconnect in Program 11-10-26). To set and change the destination of the Automatic Tandem Trunk call: Dial service code 835 (or the service code set for Set Destination for Automatic Trunk-to-Trunk Transfer).
Page 995: Toll Restriction
UNIVERGE SV8100 Issue 5.0 Toll Restriction Description For Toll Restriction see Code Restriction (page 1-283). Toll Restriction 1 - 985...
Page 996 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 986 Toll Restriction...
Page 997: Toll Restriction In Credit
UNIVERGE SV8100 Issue 5.0 Toll Restriction In Credit Description For Toll Restriction In Credit see Code Restriction In Credit (page 1-293) Toll Restriction In Credit 1 - 987...
Page 998 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 988 Toll Restriction In Credit...
Page 999: Toll Restriction Override
UNIVERGE SV8100 Issue 5.0 Toll Restriction Override Description For Toll Restriction Override see Code Restriction Override (page 1-299) Toll Restriction Override 1 - 989...
Page 1000 Issue 5.0 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 1 - 990 Toll Restriction Override...
Page 1001: Toll Restriction, Dial Block
UNIVERGE SV8100 Issue 5.0 Toll Restriction, Dial Block Description For Toll Restriction, Dial Block see Code Restriction, Dial Block (page 1-307) Toll Restriction, Dial Block 1 - 991...

NEC UNIVERGE SV8100 Features & Specifications Manual

Quick Links

Related Manuals for NEC UNIVERGE SV8100

Summary of Contents for NEC UNIVERGE SV8100