Page 1 Programming Manual NECIC-AP-002 Issue 10.1(R9.5)
Page 2 NEC Corporation reserves the right to change the specifications, functions, or features at any time without notice. NEC Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Corporation and shall not be reproduced without prior written approval of NEC Corporation.
Page 3 Notice on the Equipment Name The Equipment Name such as Chassis, Terminals described in this manual is for common name. Therefore, for the market, it is necessary to regards as the equipment name described in the table below; TableN-1: Equipment Name Category Common Name For Asia...
Page 4 Issue 10.1 UNIVERGE SV8100 TableN-1: Equipment Name Category Common Name For Asia For Australia ITL-32D-1()(BK)TEL → ITL-32D-1P(BK)TEL ITL-32D-1A(BK)TEL Terminals ITL-8LD-1()(BK)TEL → ITL-8LD-1P(BK)TEL ITL-8LD-1A(BK)TEL ITL-8LD-1()(WH)TEL → ITL-8LD-1P(WH)TEL ITL-8LDE-1()(BK)TEL → ITL-8LDE-1P(BK)TEL ITL-12PA-1()(BK)TEL → ITL-12PA-1P(BK)TEL ITL-12PA-1A(BK)TEL ITL-320C-()(BK)TEL → ITL-320C-1P(BK)TEL ITL-320C-1A(BK)TEL ITL-320C-2P(BK)TEL ITL-320C-2A(BK)TEL APR-L() UNIT →...
Page 5: Table Of Contents
What the Softkey Display Prompts Mean ......... 1-7 Section 9 System Number Plan/Capacities ............1-8 Chapter 2 Programming the UNIVERGE SV8100 Section 1 Programming Your System ............... 2-1 Program 10 : System Configuration Setup 10-01 : Time and Date ................2-3 10-02 : Location Setup ................
Page 6 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 10-13 : In-DHCP Server Setup ............2-28 10-14 : Managed Network Setup ............2-29 10-15 : Client Information Setup ............2-30 10-16 : Option Information Setup ............2-31 10-17 : H.323 Gatekeeper Setup ............2-35 10-18 : H.323 Alias Address Setup .............
Page 7 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 10-50 : License Information ..............2-73 10-51: PRI/T1/E1 Selection of CD-PRTA ..........2-78 10-52 : Free/Demo License Information ..........2-79 10-54 : License Configuration for Each Package ........ 2-80 10-55 : Package Network Setup ............2-81 10-56 : XML Portal IP Phone ...............
Page 8 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 12-04: Holiday Night Service Switching ..........2-131 12-05: Night Mode Group Assignment for Extensions ...... 2-132 12-06: Night Mode Group Assignment for Trunks ......2-133 12-07: Text Data for Night Mode ............2-134 12-08: Night Mode Service Range ............ 2-135 Program 13 : Abbreviated Dialing 13-01: Speed Dialing Option Setup ...........
Page 9 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ Program 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup ..........2-173 15-02 : Multiline Telephone Basic Data Setup ........2-176 15-03 : Single Line Telephone Basic Data Setup ......2-185 15-05 : IP Telephone Terminal Basic Data Setup ......2-188 15-06 : Trunk Access Map for Extensions .........
Page 10 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 20-02 : System Options for Multiline Telephones ......2-239 20-03 : System Options for Single Line Telephones ......2-243 20-04 : System Options for Virtual Extensions ........2-245 20-06 : Class of Service for Extensions ..........2-246 20-07 : Class of Service Options (Administrator Level) .....
Page 11 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 20-44 : Watch Mode Setup ............... 2-299 20-45 : Remote Watch Setup ............2-300 20-46 : Security Sensor Setup ............2-301 20-47 : Time Pattern Setting for Watch Mode ........2-303 20-48 : Time Pattern Setting for Security Sensor ......2-304 20-53 : Night Mode Group Assignment for Power Save Group ..
Page 12 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ Program 22 : Incoming Call Setup 22-01: System Options for Incoming Calls ........2-341 22-02: Incoming Call Trunk Setup ............. 2-343 22-03: Trunk Ring Tone Range ............2-345 22-04: Incoming Extension Ring Group Assignment ......2-347 22-05: Incoming Trunk Ring Group Assignment .......
Page 13 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 24-09 : Call Forward Split Settings ............ 2-384 Program 25 : VRS/DISA Setup 25-01 : VRS/DISA Line Basic Data Setup ......... 2-387 25-02 : DID/DISA VRS Message ............2-388 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing ..2-389 25-04 : VRS/DISA Transfer Ring Group With No Answer/Busy ..
Page 14 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ Program 30 : DSS/DLS Console Setup 30-01: DSS Console Operating Mode ..........2-421 30-02: DSS Console Extension Assignment ........2-422 30-03: DSS Console Key Assignment ..........2-423 30-04: DSS Console Alternate Answer ..........2-431 30-05: DSS Console Lamp Table ............2-432 30-10: DSS Console IP Terminal Setup ..........
Page 15 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 34-07: E&M Tie Line Timer ..............2-460 34-08: Toll Restriction Data for E&M Tie Lines ........2-461 34-09: ANI/DNIS Service Options ............2-462 34-11: E1 Trunk Basic Setup (OT) ............ 2-465 Program 35 : SMDR Account Code Setup 35-01: SMDR Options ................
Page 16 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 41-16: ACD Threshold Overflow ............2-503 41-17: ACD Login Mode Setup ............2-504 41-18: ACD Agent Identity Code Setup ..........2-505 41-19: ACD Voice Mail Delay Announcement ........2-507 41-20: ACD Queue Display Settings ..........2-509 41-21: ACD Login ID Setup ...............
Page 17 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ Program 45 : Voice Mail Integration 45-01 : Voice Mail Integration Options ..........2-547 45-02: NSL Option Setup ..............2-550 45-04: Voice Mail Digit Add Assignment ..........2-551 45-05 : Voice Mail Send Protocol Signal Without Additional Digits ... 2-552 Program 47 : InMail 47-01: VM8000 InMail System Options ..........
Page 18 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 50-05: CCIS Maximum Call Forwarding Hop Counter ....... 2-628 50-06: CCIS Feature Availability ............2-629 50-07: CCIS Centralized Billing Center Office ........2-630 50-08: CCIS Centralized BLF Sending Group Assignment ....2-631 50-09: CCIS Centralized BLF Sending Extension Number Assignment ..
Page 19 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 51-18: NetLink Configuration Options ..........2-664 51-19: NetLink IP Trunk (SIP) Calling Party Number Setup for Extension ....................2-665 Program 80 : Basic Hardware Setup for System 80-01 : Service Tone Setup ............... 2-667 80-02 : DTMF Tone Setup ..............2-677 80-03 : DTMF Tone Receiver Setup ..........
Page 20 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ Program 82 : Basic Hardware Setup for Extension 82-01 : Incoming Ring Tone .............. 2-737 82-03 : DSS Console LED Pattern Setup .......... 2-740 82-04: LCA Initial Data Setup ............2-742 82-05: ISDN BRI&PRI Layer2 (S-Point) Initial Data Setup ....2-744 82-06: ISDN BRI&PRI Layer3 (S-point) Timer Setup ......
Page 21 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 84-22 : DT700 Multiline Logon Information Setup ......2-815 84-23 : DT700 Multiline Basic Information Setup ......2-817 84-24 : DT700 Multiline CODEC Basic Information Setup ....2-819 84-25 : NetLink CODEC Information Basic Setup ......2-824 84-26: IPL Basic Setup (DSP) ............
Page 22 Issue 10.1 UNIVERGE SV8100 ___________________________________________________________________________________ 90-17: Firmware Information ............. 2-883 90-19: Dial Block Release ..............2-884 90-20: Traffic Report Data Setup ............2-885 90-21: Traffic Report Output .............. 2-887 90-22: Terminal Version information ..........2-888 90-23: Deleting Registration of IP Telephones ........2-889 90-24: System Alarm Report Notification Time Setup .......
Page 23 UNIVERGE SV8100 Issue 10.1 ___________________________________________________________________________________ 90-58: Restore Recovery Data ............2-920 90-59: Delete Recovery Data ............2-921 90-60: T1/ISDN Layer Status Information .......... 2-922 90-61: Manual Slot Install ..............2-923 90-63: DT700 Control ................ 2-924 90-64: SNMP Setup ................2-925 90-65: 1st Party CTI Authentication Password Setup ......
Page 24 LIST OF TABLES ___________________________________________________________________________________ Table 1-1 Keys for Entering Data ..................1-4 Table 1-2 Keys for Entering Names .................. 1-5 Table 1-3 Softkey Display Prompts ................... 1-7 Table 1-4 System Number Plan/Capacities ............... 1-8 Table 2-1 Programming Modes ..................2-1 Table 2-2 License Information ..................
Page 25: Chapter 1 Introduction
Introduction EFORE TART ROGRAMMING ECTION Before customizing your system be sure to read this chapter first. This chapter provides you with detailed information about the system programs. By changing a program, you change the way the feature associated with that program works. In this chapter, you find out about each program, the features that the program affects and how to enter the program data into system memory.
Page 26: How To Enter Programming Mode
Issue 10.1 UNIVERGE SV8100 The reverse type (white on black) just beneath the Description heading is the program access level. You can only use the program if your access level meets or exceeds the level the program requires. Refer to...
Page 27 UNIVERGE SV8100 Issue 10.1 User Password Level Programs at this Level Name ******** 1(MF) Manufacture Level (MF) nec-i 20-12(AU),40-04(AU), 40-07, 80-02(OT), 80-11(OT), 81- 04, 81-05, 82-01(AU), 82-03(AU), 82-04(AU), 82-05, 82-08 12345678 2 (IN) Installation (IN): tech All programs in this section not listed for MF, SA, & SB...
Page 28: Table 1-1 Keys For Entering Data
Issue 10.1 UNIVERGE SV8100 SING EYS TO ROUND IN THE ROGRAMS ECTION Once you enter the programming mode, use the keys in the following chart to enter data, edit data and move around in the menus. Table 1-1 Keys for Entering Data Keys for Entering Data Use this key...
Page 29: Programming Names And Text Messages
UNIVERGE SV8100 Issue 10.1 Table 1-1 Keys for Entering Data (Continued) Keys for Entering Data Use this key... When you want to...  Scroll backward through a list of entry numbers (e.g., from extension etc.) or through entries in a table (e.g., Common Permit Table).
Page 30 OFTKEYS ROGRAMMING ECTION Each UNIVERGE SV8100 display telephone provides interactive Softkeys for intuitive feature access. The options for these keys will automatically change depending on where you are in the system programming. Simply press the Softkey located below the option you wish and the display will change accordingly.
Page 31: What The Softkey Display Prompts Mean
UNIVERGE SV8100 Issue 10.1 HAT THE OFTKEY ISPLAY ROMPTS ECTION When using a display telephone in programming mode, various Softkey options are displayed. These keys will allow you to easily select, scan, or move through the programs. Table 1-3 Softkey Display Prompts...
Page 32: System Number Plan/Capacities
Issue 10.1 UNIVERGE SV8100 YSTEM UMBER APACITIES ECTION  The following table provides the capacities for the UNIVERGE SV8100 system. Table 1-4 System Number Plan/Capacities System Number Plan/Capacities System Type Number Plan/Capacities System Analog Caller ID Detector (detected by DSP)
Page 33 Virtual Extension Ports Virtual Extension Number Range 1~89999999* (*Extension cannot start with 0 or 9) PGD Adapter ADA (Recording Jack) Adapters UNIVERGE SV8100 Wireless – SIP DECT Access Points Unlimited Door Boxes Door Box Numbers DSS Consoles Numbers: 60 Button DSS Console ...
Page 34 Issue 10.1 UNIVERGE SV8100 Table 1-4 System Number Plan/Capacities (Continued) System Number Plan/Capacities System Type Number Plan/Capacities Speed Dialing Speed Dialing Groups Speed Dialing Bins 0~1999 Speed Dialing Table-Common 1000 ACD Groups ACD Agent Extensions ACI Groups ACI Ports Automated Attendant...
Page 35 UNIVERGE SV8100 Issue 10.1 Table 1-4 System Number Plan/Capacities (Continued) System Number Plan/Capacities System Type Number Plan/Capacities Paging and Park Internal Page Group Numbers 0, 01~64 External Page Group Numbers 0, 1~8 External Speakers CD-CP00()  PGD Adapter (1~8) ...
Page 36 Programming Password Users Footnotes Extension numbers can be one to eight digits long. Refer to the Flexible System Numbering feature in the UNIVERGE SV8100 Features and Specifications Manual.  SV8100 needs Power Calculation depending on the system configuration. 1 - 12...
Page 37: Programming The Univerge Sv8100
Programming the UNIVERGE SV8100 ROGRAMMING YSTEM ECTION This chapter provides information necessary to properly program your UNIVERGE SV8100 system. The programming blocks are organized into the following programming modes. Table 2-1 Programming Modes Program Number: Program Name Program 10 : System Configuration Setup...
Page 38 Program 82 : Basic Hardware Setup for Extension Program 84 : Hardware Setup for VoIP Program 85 : Hardware Setup for ETIA Switch (AU Only) Program 90 : Maintenance Program Program 92 : Copy Program Program 93: System Information 2 - 2 Programming the UNIVERGE SV8100...
Page 39: Program 10 : System Configuration Setup
Program 10 : System Configuration Setup 10-01 : Time and Date Level: Description Use Program 10-01: Time and Date to change the system Time and Date through system programming. Extension users can also dial Service Code 828 (OT)/ 728 (AU) to change the time if allowed by an extension Class of Service. Program Input Data Item...
Page 40: Location Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-02 : Location Setup Level: Description Use Program 10-02 : Location Setup to define the location of the installed system. Input Data Item Item Input Data Default Description Dial (up to No setting (OT) Enter the country code.
Page 41: Etu Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-03 : ETU Setup Level: Description Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data for each blade. When changing a defined terminal type, first set the type to 0 and then plug the new device in to have the system automatically define it or you may have to reseat the blade.
Page 42 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default = Not set Logical Port Number (B1) = Multiline Terminal (1~512) = SLT Adapter (OT) (1~512) = BCH (Bluetooth Cordless Handset) (1~512) = PGD Adapter (Paging) (1~8) = PGD Adapter (for Tone Ringer)
Page 43 UNIVERGE SV8100 Issue 10.1 = DT3** Multiline Telephone Type term term = No option Side Option Information = 8LK Unit = 16LK Unit = 24ADM = No option Bottom Option Information (Only applies = APR to DTL–style telephones) = ADA...
Page 44 Issue 10.1 UNIVERGE SV8100 For ODTA PKG Setup Physical Port Number 01~04 Item Item Input Data Default 0~200 Logical Port Number 0 = 2 Wire 2/4 Wire 1 = 4 Wire 0 = TYPE I E&M Line Control Method 1 = TYPE V...
Page 45 UNIVERGE SV8100 Issue 10.1 For BRIA PKG Setup ISDN Line Number 01~04 Item Item Input Data Default = No setting ISDN Line Mode = T-Point = S-Point (OT) = NW Mode (Leased Line) (OT) = NW Mode (Interconnected Line) (OT)
Page 46 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default = Slave System Master/Slave System (OT) If set to 0, system is synchronized to = Master System network clock. If set to 1, system is not synchronized to the network clock.
Page 47 UNIVERGE SV8100 Issue 10.1 For PRTA PKG Setup ISDN Line Number 01~30 Item Item Input Data Default = No setting ISDN Line Mode = T-Point = S-Point (OT) = NW Mode (Leased Line) (OT) = NW Mode (Interconnected Line) (OT)
Page 48 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default = Keypad Facility Dial Information Element ISDN Protocol definition = Called Party Number Only when Dial Sending Mode (10-03-08) is set for 1 (Overlap Sending). = Slave System Master/Slave System (Network...
Page 49 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = Standard (same as NI-2) Network Exchange Selection Select the ISDN protocol for the ISDN = reserved circuit. = reserved = DMS (A211) = 5ESS = DMS (A233) = 4ESS = NI-2...
Page 50 Issue 10.1 UNIVERGE SV8100 = Internal T1 Clock Source = External = Auto Number of Ports = 4 Ports = 8 Ports = 12 Ports = 16 Ports = 20 Ports 0 = Auto Straight/Cross Wiring 1 = Manual (Cross)
Page 51 UNIVERGE SV8100 Issue 10.1 = 0.91/1.70V Receive Input Threshold = 0.74/0.84V = 0.59/0.84V = 0.42/0.45V = 0.32/0.45V = 0.21/0.20V = 0.16/0.10V = 0.10/not defined For IPLA PKG Setup Physical Port Number 001-200 Item Item Input Data Default 0~200 Trunk Logical Port Number = H.323...
Page 52 Issue 10.1 UNIVERGE SV8100 = B8ZS Zero Code Suppression = AMI/ZCS = 0 feet ~ 133 feet Line Length Selection = 133 feet ~ 266 feet = 266 feet ~ 399 feet = 399 feet ~ 533 feet = 533 feet ~ 655 feet...
Page 53: Music On Hold Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-04 : Music On Hold Setup Level: Description Use Program 10-04 : Music on Hold Setup to set the Music on Hold (MOH) source. For internal Music on Hold, the system can provide a service tone callers on hold or one of eleven synthesized selections.
Page 54 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Analog Communications Interface (ACI)  Background Music  Music on Hold  2 - 18 Program 10 : System Configuration Setup...
Page 55: General Purpose Relay Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-05 : General Purpose Relay Setup Level: Description Use Program 10-05: General Purpose Relay Setup to define which Relay circuits (5~8) on PGD Adapter are used for General Purpose Relay.
Page 56: 10-06: Isdn Bri Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-06: ISDN BRI Setup Level: Description Use Program 10-06: ISDN BRI Setup define the TE1 selection and DID mode for DID callers when the BRI feature is used. Input Data...
Page 57: 10-07: Conversation Recording Resource (Ot)
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-07: Conversation Recording Resource (OT) Level: Description Use Program 10-07: Conversation Record Circuits to select the number of Conference circuits to be used for Conversation Recording.  Even if this program is set to '0', the telephone conversation recording function can be used.
Page 58: Pre-Ringing Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-08 : Pre-Ringing Setup Level: Description Use Program 10-08: Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the trunk LED flashes.
Page 59: Dtmf And Dial Tone Circuit Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-09 : DTMF and Dial Tone Circuit Setup Level: Description Use Program 10-09: DTMF and Dial Tone Circuit Setup to allocate the circuits on the CD-CP00 for either DTMF receiving or dial tone detection. The CD-CP00 has 32 circuits initially, and an additional 64 circuits are added when a PZ-BS10 is installed.
Page 60 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Caller ID  Central Office Calls, Placing  Direct Inward Dialing (DID)  Direct Inward System Access (DISA)  Tie Lines  2 - 24 Program 10 : System Configuration Setup...
Page 61: 10-12: Cd-Cp00 Network Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-12: CD-CP00 Network Setup Level: Description Use Program 10-12: CD-CP00 Network Setup to setup the IP Address, Subnet-Mask, and Default Gateway addresses. Caution! If any IP Address or NIC settings are changed, the system must be reset for the changes to take affect.
Page 62 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Item Input Data Default Description 0~24 (0 = -12 Hours and 24 = +12 Hours) Determine the Time Zone offset from Greenwich Mean Time (GMT) time. Then enter its respective value. For exam-...
Page 63 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Item Input Data Default Description 128.0.0.0 192.0.0.0 224.0.0.0 255.255.0.0 Set for IPLA. Subnet Mask 240.0.0.0 248.0.0.0 252.0.0.0 254.0.0.0 255.0.0.0 255.128.0.0 255.192.0.0 255.224.0.0 255.240.0.0 255.248.0.0 255.252.0.0 255.254.0.0 255.255.0.0 255.255.128.0 255.255.192.0 255.255.224.0 255.255.240.0 255.255.248.0 255.255.252.0...
Page 64: In-Dhcp Server Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-13 : In-DHCP Server Setup Level: Description Use Program 10-13: In-DHCP Server Setup to setup the DHCP Server built into the CD-CP00 blade. Input Data Item Item Input Data Default...
Page 65: Managed Network Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-14 : Managed Network Setup Level: Description Use Program 10-14 : Managed Network Setup to set up the range of the IP address which the DHCP Server leases to a client.
Page 66: Client Information Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-15 : Client Information Setup Level: Description Use Program 10-15 : Client Information Setup to set up the client information when the DHCP server needs to assign a fixed IP address to clients.
Page 67: Option Information Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-16 : Option Information Setup Level: Description Use Program 10-16 : Option Information Setup to set up the option given from the DHCP server to each client. Input Data Item...
Page 68 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Item Input Data Default Code number 0~255 43 (Fixed) Download Protocol Set Download Protocol used 163(Fixed) Sub code number for Auto Config (for DT700 Series). 1 = FTP 2 = HTTP Code number 0~255...
Page 69 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Item Input Data Default Code number 0~255 120 (Fixed) SIP Server (Domain Name) If there is setting in 10-16-16 No setting Maximum 20 character strings this setting will be ignored Code number 0~255...
Page 70 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 34 Program 10 : System Configuration Setup...
Page 71: H.323 Gatekeeper Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-17 : H.323 Gatekeeper Setup Level: Description Use Program 10-17 : H.323 Gatekeeper Setup to set the H.323 Gatekeeper information. Item Name Input Data Default = No Gatekeeper Gatekeeper Mode...
Page 72: H.323 Alias Address Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-18 : H.323 Alias Address Setup Level: Description Use Program 10-18 : H.323 Alias Address Setup to set the alias address registered to the outside H.323 Gatekeeper. Input Data Number of Alias...
Page 73: Voip Dsp Resource Selection
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-19 : VoIP DSP Resource Selection Level: Description Use Program 10-19 : VoIP DSP Resource Selection to define the criteria for each DSP resource on the VoIP blade. Input Data...
Page 74: Lan Setup For External Equipment
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-20 : LAN Setup for External Equipment Level: Description Use Program 10-20 : LAN Setup for External Equipment to define the TCP port/ address/etc. for communicating to external equipment. Input Data...
Page 75 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 39...
Page 76: 10-21: Cd-Cp00 Hardware Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-21: CD-CP00 Hardware Setup Level: Description Use Program 10-21: CD-CP00 Hardware Setup to set up External MOH and General Purpose Relay on the CD-CP00 blade. Input Data Item Related Item...
Page 77: Sip System Interconnection Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-23 : SIP System Interconnection Setup Level: Description Use Program 10-23 : SIP System Interconnection Setup to determine if the system is interconnected and define the IP address of another system, call control port number and alias address for SV8100 system interconnection.
Page 78: Daylight Savings Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-24 : Daylight Savings Setup Level: Description Use Program 10-24 : Daylight Savings Setup to set the options for daylight savings. As the telephone system is used globally, these settings define when the system should automatically adjust for daylight savings as it applies to the region in which the system is installed.
Page 79 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Item Input Data Default End of Week Day (Sun = 1, Mon = 2, etc.) Enter the day of the week when the system should adjust the time for daylight savings. (01 = Sunday, 02 = Monday, etc.).
Page 80: H.323 Gateway Prefix Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-25 : H.323 Gateway Prefix Setup Level: Description Use Program 10-25: H.323 Gateway Prefix Setup to set the gateway prefix registered to the outside gatekeeper. Input Data Item Item Input Data...
Page 81: Ip System Operation Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-26 : IP System Operation Setup Level: Description Use Program 10-26 : IP System Operation Setup to enable or disable the Peer to Peer feature for SIP MLT and SIP IP stations.
Page 82: 10-27: H.323 System Interconnection W/ Application Setup (Ot)
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-27: H.323 System Interconnection w/ Application Setup (OT) Level: Description Use Program 10-27: H.323 Interconnection with Application Setup to set the IP address of the network IP systems. Input Data...
Page 83: Sip System Information Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-28 : SIP System Information Setup Level: Description Use Program 10-28 : SIP System Information Setup to set up basic SIP trunking. Input Data Item Item Input Data Default Up to 64 Characters...
Page 84 Issue 10.1 UNIVERGE SV8100 Input Data 0 = Disable IP Trunk Port Binding Trunk port binding is only used for 1 = Enable SIP trunks to the provider in Non- Registration Mode only. When this is disabled, an inbound call comes...
Page 85: Sip Server Information Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-29 : SIP Server Information Setup Level: Description Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/inbound. The 10-29 commands are not used in non-registration mode.
Page 86 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = Off DNS Server Mode This setting determines if the DNS server is 1 = On used. 0.0.0.0 ~ 126.255.255.254 0.0.0.0 DNS Server IP Address If 10-29-08 is 1, this is effective. This sets 128.0.0.1 ~ 191.255.255.254...
Page 87 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 51...
Page 88: Sip Authentication Information Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-30 : SIP Authentication Information Setup Level: Description Use Program 10-30 : SIP Authentication Information Setup to set the authentication options for SIP trunks. Input Data Item Item Input Data...
Page 89: 10-31: Networking Keep Alive Setup (Ot)
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-31: Networking Keep Alive Setup (OT) Level: Description Use Program 10-31: Networking Keep Alive Setup to set the interval and retry count of the AspireNet networking keep alive message. The keep alive is used for ISDN and IP networking.
Page 90 Issue 10.1 UNIVERGE SV8100 Conditions The keep alive message must be sent and a response not received for the retry count, for the link to be taken out of service and the calls in progress and Park Hold orbits to be released.
Page 91: 10-32: Networking Maximum Pri Channel Setup (Ot)
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-32: Networking Maximum PRI Channel Setup (OT) Level: Description Use Program 10-32: PRI Networking Maximum PRI Channel Setup to assign the number of B-channels to be used for each ISDN blade. This allows for fractional PRIs when used with multiple site networking.
Page 92: Sip Registrar/Proxy Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-33 : SIP Registrar/Proxy Information Basic Setup Level: Description Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the registrar/proxy options for SIP extensions. Input Data Item Item...
Page 93: Sip Trunk Registration Information Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-36 : SIP Trunk Registration Information Setup Level: Description Use Program 10-36: SIP Trunk Registration Information Setup to set the SIP trunk registration information. Input Data Register ID 1~31 Input Data...
Page 94: Upnp Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-37 : UPnP Setup Level: Description Use Program 10-37 : UPnP Setup to set the UPnP (Universal Plug and Play) options for SIP trunks. Input Data Item Item Input Data...
Page 95: Bgm Resource Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-38 : BGM Resource Setup Level: Description Use Program 10-38 : BGM Resource Setup to configure the Background Music Source input. Input Data Item Input Data Default 0 = CPU IN...
Page 96: Fractional Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-39 : Fractional Setup Level: Description Use Program 10-39 : Fractional Setup to enable or disable the ability to use fractional T1 or PRI. Input Data Item No. Item Input Data...
Page 97: Ip Trunk Availability
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-40 : IP Trunk Availability Level: Description Use Program 10-40 : IP Trunk Availability to enable or disable the ability to use SIP trunks and assign the number of ports if IP Trunk is enabled.
Page 98 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 62 Program 10 : System Configuration Setup...
Page 99: 10-41: General Purpose Contact Detector Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-41: General Purpose Contact Detector Setup Level: Description (This program is aviable for V7000 or higher for AU) Use Program 10-41: General Purpose Contact Detector Setup to specify the circuit number used on a PGD Adapter as a contact detection circuit.
Page 100: Virtual Loop Back Port Setting
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-42 : Virtual Loop Back Port Setting Level: Description Use Program 10-42: Virtual Loop Back Port Setting to set the data for the Virtual Loop Back Port. Input Data Item...
Page 101: Ip Routing Table Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-45 : IP Routing Table Setup Level: Description Use Program 10-45: IP Routing Table Setup to set up the IP Routing Table. Caution! If any IP Address or NIC settings are changed, the system must be reset for the changes to take affect.
Page 102 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference None 2 - 66 Program 10 : System Configuration Setup...
Page 103: Dt700 Server Information Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-46 : DT700 Server Information Setup Level: Description Use Program 10-46 : DT700 Server Information Setup to setup the information of SIP Multiline (DT700 series) Server. Input Data Item Related...
Page 104 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default Program 0~65535 5080 Register Port Assign the port number in which the SIP messages are sent to the IPLA. This same port number must be assigned in the SIP Multiline terminals.
Page 105 UNIVERGE SV8100 Issue 10.1 Feature Cross Reference None Programming Manual 2 - 69...
Page 106: Terminal License Server Information Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-47 : Terminal License Server Information Setup Level: Description Use Program 10-47: Terminal License Server Information Setup to setup the TCP Port for Terminal License Server. Input Data Item Item...
Page 107: License Activation
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-48 : License Activation Level: Description Use Program 10-48 : License Activation to turn on the license issued from the license server. Input Data Item Item Input Data Default None...
Page 108: License File Activation
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-49 : License File Activation Level: Description Use Program 10-49 : License File Activation to enable the command to save the license file via USB memory which is issued from the license server.
Page 109: License Information
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-50 : License Information Level: Description Use Program 10-50 : License Information to confirm license information that is stored in a system. Input Data Item Item Read Data Refer to Table 2-2 License Information on page 2-74.
Page 110: Table 2-2 License Information
Issue 10.1 UNIVERGE SV8100 Refer to the following table to assist with licensing information. Table 2-2 License Information Reset License Code License Name Note Required 0001 Max. Port On/Off 0002 NetLink 0007 Hotel/Motel On/Off (PMS) 0008 SMDR On/Off 0009 Remote...
Page 111 UNIVERGE SV8100 Issue 10.1 Table 2-2 License Information (Continued) Reset License Code License Name Note Required 1001 1002 InMail 1011 InMail Multi Lan 1013 Email Notify On/Off 1014 InMail Email Clnt InMail Email Clients 1401 UMS Port 1402 UMS Fax Port...
Page 112 Issue 10.1 UNIVERGE SV8100 Table 2-2 License Information (Continued) Reset License Code License Name Note Required 2103 ACD-MIS Add.Monit 2104 ACD-MIS Agent 2105 ACD Advance On/Off 3000 CA-Basic On/Off 3001 CA-256 Station On/Off 3002 CA-Up 20 to 256 On/Off 3003...
Page 113 UNIVERGE SV8100 Issue 10.1 Table 2-2 License Information (Continued) Reset License Code License Name Note Required 5101 IP Terminal Limited by IPL Basic Channels 5102 IP Terminal Limited by IPL SoftPhone Channels 5111 IP Terminal Limited by IPL Advan Channels...
Page 114: 10-51: Pri/T1/E1 Selection Of Cd-Prta
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-51: PRI/T1/E1 Selection of CD-PRTA Level: Description Use Program 10-51: PRI/T1/E1 Selection of CD-PRTA to select whether the CD-PRTA works as PRI,T1 or E1. Input Data System ID 0~50 Slot Number...
Page 115: Free/Demo License Information
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-52 : Free/Demo License Information Level: Description Use Program 10-52 : Free/Demo License Information to display information on free of charge/Demo license. Input Data Item Item Read Data 0~9999 Remaining days of Free/Demo License...
Page 116: License Configuration For Each Package
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-54 : License Configuration for Each Package Level: Description Use Program 10-54 : License Configuration for Each Package to set the license information for each unit. Input Data Slot Number...
Page 117: Package Network Setup
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-55 : Package Network Setup Level: Description Use Program 10-55: Package Network Setup to set the network settings for each installed blade. This program sets the SPOE of each package.
Page 118 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0.0.0.0~126.255.255.254 0.0.0.0 Default Gateway 128.0.0.1~191.255.255.254 192.0.0.1~223.255.255.254 Conditions None Feature Cross Reference None 2 - 82 Program 10 : System Configuration Setup...
Page 119: Xml Portal Ip Phone
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-56 : XML Portal IP Phone Level: Description Use Program 10-56: XML Portal IP Phone to set the contents of XML portal page provided to the IP Phone. The XML Portal Page is included in the XML application name and URL Link information.
Page 120: 10-58: Intranet Local Network Area Setup
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-58: Intranet Local Network Area Setup Level: Description Use Program 10-58: Intranet Local Network Area Setup to set the local network address when the SIP multiline terminal connects to the system via a local router.
Page 121: 10-59: System Configuration Option Setup (Ot)
UNIVERGE SV8100 Issue 10.1 Program 10 : System Configuration Setup 10-59: System Configuration Option Setup (OT) Level: Description Use Program 10-59: System Configuration Option Setup to defines system options related with system configuration. Input Data Item Item Input Data Default...
Page 122: Ntp Server
Issue 10.1 UNIVERGE SV8100 Program 10 : System Configuration Setup 10-65 : NTP Server Level: Description Use Program 10-65 : NTP Server to set the NTP (Network Time Protocol) Server which is built-in the CPU. NTP server can synchronize the time for IP Video Door phone, or NTP clients connected to the SV8100 network.
Page 123: Program 11 : System Numbering
Program 11 : System Numbering 11-01 : System Numbering Level: Description to set the system numbering plan. The Program 11-01: System Numbering numbering plan assigns the first and second digits dialed and affects the digits an extension user must dial to access other extensions and features, such as Program service codes and trunk codes.
Page 124: Table 2-3 System Numbering Default Settings
Issue 10.1 UNIVERGE SV8100 Entering two digits lets you define codes based on the first two digits a user dials.  For example, entering 60 allows you to define the function of all codes beginning with 60. In the default program, only use 2-digit codes.
Page 125 UNIVERGE SV8100 Issue 10.1 Dial Dial Type Description Related Program Types 11-20: Dial Extension Analyse Table Dial Extension Analyze  Changing the Dial Type for a range of codes can have a dramatic affect on how your system operates. Assume, for example, the site is a hotel that has room numbers from 100-399. To make extension numbers correspond to room numbers, you should use Program 11-02 to reassign extension numbers on each floor from 100 to 399.
Page 126 Issue 10.1 UNIVERGE SV8100 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 127 UNIVERGE SV8100 Issue 10.1 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 128 Issue 10.1 UNIVERGE SV8100 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 129 UNIVERGE SV8100 Issue 10.1 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 130 Issue 10.1 UNIVERGE SV8100 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 131 UNIVERGE SV8100 Issue 10.1 Table 2-3 System Numbering Default Settings (Continued) Dial Types: 1=Service Code, 2=Extension Number, 3=Trunk Access, 4=Special Trunk Access, 5=Operator Access, 6=Flexible Routing, 8 = Networking System Access (OT), 9 = Dial Extension Analyze, 0=Not Used Dialed...
Page 132: Extension Numbering
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-02 : Extension Numbering Level: Description to set the extension number. The extension Program 11-02: Extension Numbering number can have up to eight digits. The first/second digit(s) of the number should be assigned in Program 11-01 or Program 11-20.
Page 133 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Department Calling  Flexible System Numbering  Intercom  Programming Manual 2 - 97...
Page 134: Virtual Extension Numbering
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-04 : Virtual Extension Numbering Level: Description to define the virtual extension Program 11-04: Virtual Extension Numbering numbers. The extension number can have up to eight digits. The first/second digit(s) of the number should be assigned in Program 11-01 or Program 11-20.
Page 135 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Flexible System Numbering  Multiple Directory Numbers / Call Coverage  Programming Manual 2 - 99...
Page 136: Aci Extension Numbering
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-06 : ACI Extension Numbering Level: Description to define the virtual extension number Program 11-06: ACI Extension Numbering to be used for the ACI. The extension number can have up to eight digits. The first...
Page 137: Department Group Pilot Numbers
UNIVERGE SV8100 Issue 10.1 Program 11 : System Numbering 11-07 : Department Group Pilot Numbers Level: Description to assign a pilot number to each Program 11-07: Department Group Pilot Numbers Department Group set up in Program 16-02. The pilot number is the number users dial for Department Calling and Department Step Calling.
Page 138: Aci Group Pilot Number
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-08 : ACI Group Pilot Number Level: Description to assign the pilot number to the ACI Program 11-08: ACI Group Pilot Number Groups set in Program 33-02. The pilot number can have up to four digits. The first and second digits of the number should be assigned in Program 11-01 or Program 11- 20 as type 2.
Page 139: Trunk Access Code
UNIVERGE SV8100 Issue 10.1 Program 11 : System Numbering 11-09 : Trunk Access Code Level: Description to assign the trunk access code. The trunk Program 11-09: Trunk Access Code access code can be set from 1~8 digits which is defined to type 3 and 4 in Program 11-01.
Page 140 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Trunk Access Description Default Related Program Code Use this program to 11-01 : System 2nd Trunk Route  Setting Numbering Access Code define additional trunk access codes. 14-01 - 07: Basic ...
Page 141: Service Code Setup (For System Administrator)
UNIVERGE SV8100 Issue 10.1 Program 11 : System Numbering 11-10 : Service Code Setup (for System Administrator) Level: Description to customize the Program 11-10: Service Code Setup (for System Administrator) Service Codes for the System Administrator. You can customize additional Service Codes in Programs 11-11~11-16.
Page 142 Issue 10.1 UNIVERGE SV8100 Input Data Item Default Default Related Item Terminals (OT) (AU) Program 12-xx Night Mode Switching for Other 20-07-01 Group --- Not Used --- --- Not Used --- --- Not Used --- 11-11-09 Leaving Message Waiting (Requires CPU to be licensed for...
Page 143 UNIVERGE SV8100 Issue 10.1 Input Data Item Default Default Related Item Terminals (OT) (AU) Program MLT, SLT Not Set Not Set 20-07-28 Change the Guidance Message Number on Voice Mail Auto Attendant Not Set Not Set 20-07-30 Date Setting Not Set...
Page 144: Service Code Setup (For Setup/Entry Operation)
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-11 : Service Code Setup (for Setup/Entry Operation) Level: Description Use Program 11-11: Service Code Setup (for Setup/Entry Operation) to customize the Service Codes which are used for registration and setup. You can customize additional Service Codes in Programs 11-10, and 11-12 ~ 11-16.
Page 145 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program Text Message Setting Setting 20-09-05 Enable Handsfree Incoming Intercom 20-02-12 Calls 20-09-05 Force Ringing of Incoming Intercom 20-02-12 Calls 15-07 Programmable Function Key 11-11-38...
Page 146 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program MLT, SLT 21-14 Toll Restriction Override Ring Volume Set 15-07 Programmable Function Key 11-11-17 Programming (2-Digit Service Codes) MLT, SLT Station Speed Dial Number Entry...
Page 147 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program MLT, SLT 21-01-19 Set Do Not Call Table Setting Setting 15-01-07 MLT, SLT Call Forward with Personal Greeting MLT, SLT 15-01-08 Call Forward to Attendant except...
Page 148: Service Code Setup (For Service Access)
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-12 : Service Code Setup (for Service Access) Level: Description Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes which are used for service access. You can customize additional Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
Page 149 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program MLT, SLT Group Speed Dialing MLT, SLT Last Number Dial MLT, SLT Saved Number Dial MLT, SLT Trunk Group Access MLT, SLT Specified Trunk Access...
Page 150 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program --- Not Used --- MLT, SLT Station Speed Dialing 11-16-08 Voice Over Flash on Trunk lines MLT, SLT 14-05 Answer No-Ring Line (Universal 14-06...
Page 151 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Default Default Related Item Terminals (OT) (AU) Program MLT, SLT Watch Mode Start MLT, SLT Security Sensor Mode Start  MLT = Multiline Terminal  SLT = Single Line Telephone Conditions None Feature Cross Reference Refer to the Input Data chart on the previous pages.
Page 152: Service Code Setup (For Acd)
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-13 : Service Code Setup (for ACD) Level: Description Use Program 11-13: Service Code Setup (for ACD) to customize the Service Codes which are used with the Automatic Call Distribution (ACD) feature. You can customize additional Service Codes in Programs 11-10 ~ 11-12 and 11-14 ~ 11-16.
Page 153 UNIVERGE SV8100 Issue 10.1 Input Data Default Default Related Item Item Terminals (OT) (AU) Program 20-13-33 Change Agent ACD Group by Supervisor When using service code 669 to change an agent ACD group, the supervisor must enter a 2-digit number for the group.
Page 154: Service Code Setup (For Hotel)
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-14 : Service Code Setup (for Hotel) Level: Description Use Program 11-14: Service Code Setup (for Hotel) to customize the Service Codes which are used with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-13, 11-15 and 11-16.
Page 155 UNIVERGE SV8100 Issue 10.1 Input Data Item Default Default Item Terminals (OT) (AU) MLT, SLT Check-Out MLT, SLT Room Status Change for Own Extension MLT, SLT Room Status Change for Other Extension Room Status Output MLT, SLT Hotel Room Monitor...
Page 156: Service Code Setup, Administrative (For Special Access)
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-15 : Service Code Setup, Administrative (for Special Access) Level: Description Use Program 11-15: Service Code Setup, Administrative (for Special Access) to customize the special access Service Codes which are used by the administrator in the Hotel/Motel feature.
Page 157 UNIVERGE SV8100 Issue 10.1 Input Data Default Default Item Related Item Terminals Program (OT) (AU) --- Not Used --- Ethernet Port Reset Setting Setting 92-04 Extension Data Swap Setting Setting 22-02 Remote Access from DISA Setting Setting Modem Access Setting...
Page 158: Single Digit Service Code Setup
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-16 : Single Digit Service Code Setup Level: Description Use Program 11-16: Single Digit Service Code Setup to customize the one-digit Service Codes used when a busy or ring back signal is heard. You can customize additional Service Codes in Programs 11-10 ~ 11-15.
Page 159 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Refer to the Input Data chart on previous pages.  Programming Manual 2 - 123...
Page 160: Acd Group Pilot Number
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-17 : ACD Group Pilot Number Level: Description to assign the ACD Master Number for Program 11-17: ACD Group Pilot Number each ACD Group. This is the number a user dials to transfer calls to the ACD Group.
Page 161: 11-19: Remote Conference Pilot Number Setup
UNIVERGE SV8100 Issue 10.1 Program 11 : System Numbering 11-19: Remote Conference Pilot Number Setup Level: Description Use Program 11-19: Remote Conference Pilot Number Setup to assign the pilot number to be used for the Remote Conference. This is the number that outside parties will call in order to connect to a conference.
Page 162: 11-20: Dial Extension Analyse Table
Issue 10.1 UNIVERGE SV8100 Program 11 : System Numbering 11-20: Dial Extension Analyse Table Level: Description to define the dial type based on Program 11-20: Dial Extension Analyze Table three or more digits. This program is relevant only if digits in 11-01-01 are set to 9 (Dial Extension Analyze).
Page 163: Program 12 : Night Mode Setup
Program 12 : Night Mode Setup 12-01: Night Mode Function Setup Level: Description Use Program 12-01: Night Mode Function Setup to set up the Night Mode options. Refer to the following chart for a description of each option, its range and default setting.
Page 164: 12-02: Automatic Night Service Patterns
Issue 10.1 UNIVERGE SV8100 Program 12 : Night Mode Setup 12-02: Automatic Night Service Patterns Level: Description Use Program 12-02: Automatic Night Service Patterns to define the daily pattern of the Automatic Mode Switching. Each Mode Group has 10 patterns. These patterns are used in Programs 12-03 &...
Page 165 UNIVERGE SV8100 Issue 10.1 Time Pattern 2 0:00 0:00 Mode 2 (night) Time setting 01: 00:00 to 00:00 Mode 2 (night) Default All groups, all patterns: 00:00 to 00:00 = Mode 1 Time Pattern 1 Set Time Number Start Time...
Page 166: 12-03: Weekly Night Service Switching
Issue 10.1 UNIVERGE SV8100 Program 12 : Night Mode Setup 12-03: Weekly Night Service Switching Level: Description Use Program 12-03: Weekly Night Service Switching to define a weekly schedule of night-switch settings. 21-02: Trunk Group Routing for Extensions Input Data...
Page 167: 12-04: Holiday Night Service Switching
UNIVERGE SV8100 Issue 10.1 Program 12 : Night Mode Setup 12-04: Holiday Night Service Switching Level: Description Use Program 12-04: Holiday Night Service Switching to define a yearly schedule of holiday night-switch settings. This schedule is used for the setting of special days when the company is expected to be closed, such as a national holiday.
Page 168: 12-05: Night Mode Group Assignment For Extensions
Issue 10.1 UNIVERGE SV8100 Program 12 : Night Mode Setup 12-05: Night Mode Group Assignment for Extensions Level: Description Use Program 12-05: Night Mode Group Assignment for Extensions to a assign Day/Night Mode Group for each extension. Input Data Extension Number Up to eight digits Item No.
Page 169: 12-06: Night Mode Group Assignment For Trunks
UNIVERGE SV8100 Issue 10.1 Program 12 : Night Mode Setup 12-06: Night Mode Group Assignment for Trunks Level: Description Use Program 12-06: Night Mode Group Assignment for Trunks to assign a Day/ Night Mode Group for each trunk port. Input Data...
Page 170: 12-07: Text Data For Night Mode
Issue 10.1 UNIVERGE SV8100 Program 12 : Night Mode Setup 12-07: Text Data for Night Mode Level: Description Use Program 12-07: Text Data for Night Mode to make an original text message which is displayed on an LCD of Multiline telephone in each Mode.
Page 171: 12-08: Night Mode Service Range
UNIVERGE SV8100 Issue 10.1 Program 12 : Night Mode Setup 12-08: Night Mode Service Range Level: Description Use Program 12-08: Night Mode Service Range to define the changing range of toggle key for each Day/Night Mode. Input Data Night Mode Service Group Number 01~32 Item No.
Page 172 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 136 Program 12 : Night Mode Setup...
Page 173: Program 13 : Abbreviated Dialing
Program 13 : Abbreviated Dialing 13-01: Speed Dialing Option Setup Level: Description to define the Speed Dialing Program 13-01: Speed Dialing Function Setup functions. Program Input Data Item Related Item Input Data Default Program = Trunk 13-05 Speed Dialing Auto Outgoing Call Mode Outgoing Mode...
Page 174: 13-02: Group Speed Dialing Bins
Issue 10.1 UNIVERGE SV8100 Program 13 : Abbreviated Dialing 13-02: Group Speed Dialing Bins Level: Description to define the range of bin numbers to Program 13-02: Group Speed Dialing Bins be used by each Speed Dialing group. (Refer to 13-03: Speed Dialing Group Assignment for Extensions).
Page 175: 13-03: Speed Dialing Group Assignment For Extensions
UNIVERGE SV8100 Issue 10.1 Program 13 : Abbreviated Dialing 13-03: Speed Dialing Group Assignment for Extensions Level: Description Use Program 13-03: Speed Dialing Group Assignment for Extensions to assign Speed Dialing Group for each extension. There are 64 available Speed Dialing groups.
Page 176: 13-04: Speed Dialing Number And Name
Issue 10.1 UNIVERGE SV8100 Program 13 : Abbreviated Dialing 13-04: Speed Dialing Number and Name Level: Description Use Program 13-04: Speed Dialing Number and Name to store Speed Dialing data in the Speed Dialing areas. This program is also used to define the names assigned to the Speed Dialing numbers.
Page 177 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program If Transfer mode is (Refer to 13-04- 13-04-03 Transfer Destination Setting Number 03): 1 = Internal Dial Mode 1~9, 0, # , P, R, @  (Maximum 24 Characters)
Page 178 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program Maximum of 28 digits 15-02-58 Memo 3 Setting Define Memo Display information tied to Common Speed Dial bin or Telephone Book which match with incoming Caller ID. This will be...
Page 179: 13-05: Speed Dial Trunk Group
UNIVERGE SV8100 Issue 10.1 Program 13 : Abbreviated Dialing 13-05: Speed Dial Trunk Group Level: Description Use Program 13-05: Speed Dialing Trunk Group to define the trunk group/route to be seized for each Speed Dialing number. If this program has an entry of 0 (no setting), then seizing a line follows the trunk access group routing of the caller’s extension (refer to Program 14-06).
Page 180: 13-07: Telephone Book Dial Number And Name
Issue 10.1 UNIVERGE SV8100 Program 13 : Abbreviated Dialing 13-07: Telephone Book Dial Number and Name Level: Description Use Program 13-07: Telephone Book Dial Number and Name to set up the dial number and name of each Telephone Book Number.
Page 181: 13-08: Telephone Book System Name
UNIVERGE SV8100 Issue 10.1 Program 13 : Abbreviated Dialing 13-08: Telephone Book System Name Level: Description Use Program 13-08: Telephone Book System Name to set up the name of the Telephone Book. Input Data Telephone Book Number 1~100 Item Item...
Page 182: 13-09: Telephone Book Group Name
Issue 10.1 UNIVERGE SV8100 Program 13 : Abbreviated Dialing 13-09: Telephone Book Group Name Level: Description Use Program 13-09: Telephone Book Group Name to set up the group name of the Telephone Book. Input Data Telephone Book Number 1~100 Item No.
Page 183: 13-10: Telephone Book Routing
UNIVERGE SV8100 Issue 10.1 Program 13 : Abbreviated Dialing 13-10: Telephone Book Routing Level: Description Use Program 13-10: Telephone Book Routing to set up outgoing mode when using the Telephone Book. Trunk outgoing mode follows Program 14-06 setting. Input Data...
Page 184 Issue 10.1 UNIVERGE SV8100 2 - 148 Program 13 : Abbreviated Dialing...
Page 185: Program 14 : Trunk, Basic Setup
Program 14 : Trunk, Basic Setup 14-01: Basic Trunk Data Setup Level: Description Use Program 14-01: Basic Trunk Data Setup to set the basic options for each trunk port. Refer to the chart below for a description of each option, its Program range and default setting.
Page 186 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 1~63 16 (-8dB) Receive Gain Level for (OT) Conference and Transfer (-15.5dB ~ +15.5dB Calls 32 (0dB) in 0.5dB intervals) (AU) Use this option to select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
Page 187 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Disable (No) 0 (OT) Trunk-to-Trunk Transfer 1 (AU) = Enable (Yes) Use this option to enable (1) or disable (0) loop supervision for the trunk. This option is required for Call Forwarding Off-Premise and Tandem Trunking only.
Page 188 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Prevent (No) 14-01-21 Block Outgoing Caller ID = Allow (Yes) 20-08-15 Allow (1) or prevent (0) the system from automatically blocking outgoing Caller ID information when a user places a call.
Page 189 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Disable (No) Caller ID Refuse Setup = Enable (Yes) 0 = No Effect (No) 15-12 Effectivity of “Conversation Recording 1 = Available (Yes) Destination for Extension” = Disable (No)
Page 190 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 0 = Prefer Extension CLI Composition 1 = Combine Trunk + If select default value Extension 0:”prefer extension”, the extension's CLI is sent out, if it is not empty. If it is empty, the trunk's CLI is sent instead.
Page 191 UNIVERGE SV8100 Issue 10.1 Feature Cross Reference Refer to features in the Input Data table.  Programming Manual 2 - 155...
Page 192: 14-02: Analog Trunk Data Setup
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-02: Analog Trunk Data Setup Level: Description Use Program 14-02: Analog Trunk Data Setup to set the basic options for each analog trunk port. Refer to the table below for a description of each option, its range and default setting.
Page 193 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = No Pause (No) 21-01-06 Pause at 1st Digit after Line Seize in Manual Dial Mode = Pause (Yes) = Automatic 21-01-03 DP to DTMF Conversion Options = Automatic and...
Page 194 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Disable (No) Trunk-to-Trunk Limitation = Enable (Yes) = Loop Start (Loop) Loop Start/Ground Start = Ground Start (Ground) = FSK Caller ID Type = DTMF = Disable 0 (OT) Sync.
Page 195: 14-04: Behind Pbx Setup
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-04: Behind PBX Setup Level: Description Use Program 14-04: Behind PBX Setup to indicate if the trunk is installed behind a PBX. There is a separate setting for each mode 1-8.
Page 196: 14-05: Trunk Group
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-05: Trunk Group Level: Description Use Program 14-05: Trunk Group to assign trunks to Trunk Groups. You can also assign the outbound priority for trunks within the group. When users dial up the trunk group, they seize the trunks in the order you specify in the outbound priority entry.
Page 197: 14-06: Trunk Group Routing
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-06: Trunk Group Routing Level: Description Use Program 14-06: Trunk Group Routing to set up an outbound routing table for the trunk groups you assigned in Program 14-05. When a user dial 9, the system routes their calls in the order (priority) specified.
Page 198 Issue 10.1 UNIVERGE SV8100 Input Data Route Table Number 001~100 Item Priority Order Related Input Data Default Number Program See Below 14-01-07 (OT) 0 = Not Set 14-05 001-100 = Trunk group No. 15-01-02 101-150 = 100+Networking System No. 21-02 1001-1100 = 1000+Route Table No.
Page 199: 14-07: Trunk Access Map Setup
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-07: Trunk Access Map Setup Level: Description Use Program 14-07: Trunk Access Map Setup to set up the Trunk Access Maps. This sets an extension access options for trunks. For example, an extension can place only outgoing calls on trunks to which it has outgoing access.
Page 200 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Central Office Calls, Answering  Central Office Calls, Placing  2 - 164 Program 14 : Trunk, Basic Setup...
Page 201: 14-08: Music On Hold Source For Trunks
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-08: Music on Hold Source for Trunks Level: Description Use Program 14-08: Music on Hold Source for Trunks to define a Music on Hold source for a trunk as either the ACI or COI port.
Page 202: 14-09: Conversation Recording Destination For Trunks
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-09: Conversation Recording Destination for Trunks Level: Description Use Program 14-09: Conversation Recording Destination for Trunks to set the ACI Conversation Recording destination for each trunk.  If both Programs 14-09 and 15-12 define a destination, the destination in Program 15-12 is followed.
Page 203: 14-11: Id Setup For Ip Trunk
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-11: ID Setup for IP Trunk Level: Description Use Program 14-11: ID Setup for IP Trunk to set the ID of each IP Trunk. This program refers to incoming and outgoing IP Trunk calls. The ID is sent on an outgoing IP Trunk call.
Page 204: 14-12: Sip Register Id Setup For Ip Trunk
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-12: SIP Register ID Setup for IP Trunk Level: Description Use Program 14-12: SIP Register ID Setup for IP Trunk to define the SIP Register ID for IP Trunks. Input Data...
Page 205: 14-13: Ccis System Route Id
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-13: CCIS System Route ID Level: Description Use Program 14-13: CCIS System Route ID to define the CCIS route ID to the trunk group used for K-CCIS. Input Data Trunk Group Number...
Page 206: 14-14: Ccis Trunk Cic Assignment
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-14: CCIS Trunk CIC Assignment Level: Description Use Program 14-14: CCIS Trunk CIC Assignment to define the CIC (Circuit Identifier Code) to each voice channel (trunk port) used for K-CCIS.
Page 207: 14-15: Isdn Call Forward Method
UNIVERGE SV8100 Issue 10.1 Program 14 : Trunk, Basic Setup 14-15: ISDN Call Forward Method Level: Description Use Program 14-15: ISDN Call Forward Method to assign the activation of Call Deflection/ Call Rerouting feature. Input Data Trunk Port Number 001 ~ 200...
Page 208: Ip Trunk Data Setup
Issue 10.1 UNIVERGE SV8100 Program 14 : Trunk, Basic Setup 14-18 : IP Trunk Data Setup Level: Description Use Program 14-18 : IP Trunk Data Setup to define the basic setting of each IP Trunk. Input Data Trunk Port Number...
Page 209: Program 15 : Extension, Basic Setup
Program 15 : Extension, Basic Setup 15-01 : Basic Extension Data Setup Level: Description Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension. Program Input Data Extension Number Maximum eight digits Item Related Item Input Data Default...
Page 210 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 0 = Disable 10-03-05 ISDN Caller ID 20-08-13 1 = Enable If both Program 15-01- 04 and 10-03-05 are enabled, the system includes Caller ID in the Setup message as Presentation Allowed.
Page 211 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 175...
Page 212: Multiline Telephone Basic Data Setup
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-02 : Multiline Telephone Basic Data Setup Level: Description Use Program 15-02: Multiline Telephone Basic Data Setup to set up various Multiline telephone options. Input Data Extension Number Maximum eight digits...
Page 213 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = High 22-03 Trunk Ring Tone = Medium Use this option to set the tone = Low (pitch) of the incoming trunk ring for the extension port you are = Ring Tone 1 programming.
Page 214 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Preselect Automatic Handsfree = One-Touch (Automatic Use this option to set whether Handsfree) pressing a key accesses a One-Touch Key or if it preselects the key. = Idle (Off)
Page 215 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Normal mode 20-02-10 Power-Saving Mode = Power-Saving Mode (Eco-Mode) = CTI Mode 15-02-20 CTA Data Communication Mode = Non Procedural Mode Select 0 if the dip switch settings...
Page 216 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Preview Speed Dial Preview Mode = Outgoing Immediately This option defines how a speed dial key functions when pressed. If set to Preview (0), the speed dial number can be previewed before dialing.
Page 217 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Vir. Ext. (Virtual Toll Restriction Class Extension Class) Select the Toll Restriction Class to = Real Ext. (Real use when placing a call from a Extension Class) virtual extension.
Page 218 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 0 = Speaker Off-Hook Ring 11-11-37 Incoming Off-Hook Ring Setup 11-11-62 1 = Headset Off-Hook Ring 15-02-12 15-02-41 0 = No Switch to Speaker Ring 11-11-62 Headset Ring Duration...
Page 219: Table 2-4 Lamp Cycle On/Off Timing Pattern
UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Original Operation Aspire Model-C Phone Operation Mode (OT) Mode When this setting is assign “1”, = CTI Special Operation Aspire Model-C phone is working Mode with Model-B (Type-A) as following key layout;...
Page 220: Table 2-5 Program 15-02 - Incoming Signal Frequency Patterns
Issue 10.1 UNIVERGE SV8100 Table 2-4 Lamp Cycle On/Off Timing Pattern Programs 15-02-35, 36, and 38 Input Cycle Cycle 6 625ms – ON / 125ms – OFF / 125ms – ON / 125ms – OFF Cycle 7 1000ms – ON Table 2-5 Program 15-02 –...
Page 221: Single Line Telephone Basic Data Setup
= DTMF Use this option to tell the system the type of dialing the connected telephone uses. For the UNIVERGE SV8100 Wireless telephones to function correctly, this must be set to 0 (dial pulse). If this option is set for DTMF, after an outside call is placed, the system cannot dial any additional digits.
Page 222 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Disable Extension Polarity Reverse (Off) Do Not Change Default Entry as DTMF issues = Enable may arise with voice mail. (On) = No 11-12-45 Enabled On-Hook When Holding (SLT)
Page 223 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = Normal Dial Tone Select (OT) = New DT When the function of MW has been set from another extension or VM, the dial tone upon off hook is selected.
Page 224: Ip Telephone Terminal Basic Data Setup
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-05 : IP Telephone Terminal Basic Data Setup Level: Description Use Program 15-05: IP Telephone Terminal Basic Data Setup to set up the basic settings for an IP telephone. Input Data...
Page 225 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Description Program Up to 48 characters No setting 15-05-17 Nickname section Nickname on Invite message. Example: Extension 100 has a Nickname set to PAUL. Extension 101 has command 15- 05-17 set to Nickname.
Page 226 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Description Program 0 = Not Used 15-05-01 If there is an IP Duplication Allowed adapter that has 1 = Group 1 Group one IP address 2 = Group 2 coming into it but...
Page 227 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Description Program 0 = Not Used When this is Protection Service enabled it allows 1 = Used the MLT SIP telephones to use the "security" key. If disabled, and the key is pressed, nothing happens.
Page 228 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Description Program 0 = Do Not Play DTMF Play during 1 = Play Conversation at Receive Extension 0 = Off Alarm Tone during 1 = On Conversation (RTP packet loss alarm)
Page 229 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Description Program 0 = Disable Sets the override CTI Override function against 1 = Enable Mode (AU) the terminal that is controlled by the CTI. 0 = Both name and...
Page 230 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Description Program 0 = Disable 10-46-14 NAT Plug & Effect this Play 1 = Enable program only when PRG 10-46-14 (for DT700) or PRG 10-33-05 (for Standard SIP Terminal) are set to NAT mode.
Page 231 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Description Program 0 = Disable 10-46-14 On a per station Registration Expire Timer basis, this setting 60 ~ 65535(sec) for NAPT defines the SIP registration expiry timer. This setting only applies to...
Page 232 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Description Program 0 = Disable Select whether or Receiving SIP INFO not system can 1 = Allowed any time receive DTMF 2 = Allowed while RTP from standard SIP is not available phone via SIP INFO message.
Page 233: Trunk Access Map For Extensions
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-06 : Trunk Access Map for Extensions Level: Description Use Program 15-06: Trunk Access Map for Extensions to define the trunk access map for each extension. An extension can place only outgoing calls on trunks to which it has outgoing access.
Page 234: Programmable Function Keys
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-07 : Programmable Function Keys Level: Description Use Program 15-07 : Programmable Function Keys to assign functions to a multiline terminal line keys. For certain functions, you can append data to the key basic function. For example, the function 26 appended by data 1 makes a Group Call Pickup key for Pickup Group 1.
Page 235 UNIVERGE SV8100 Issue 10.1 Item Line Key Function Number Additional Data Number 1~48 0~99 Refer to Function Number List. (Normal Function Code) (Service Code 851 (OT) / 751 (AU) by default) * 00 ~ *99 (Appearance Function Code) (Service Code 852...
Page 236 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number Red On: Fowarded Call Forward - Immediate Red On: Fowarded Call Forward - Busy...
Page 237 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number None Saved Number Redial None Memo Dial None Meet – Me Conference...
Page 238 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number Extension Number Red On: extension busy Reverse Voice Over Off: extension idle...
Page 239 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number Extension Group Blink (Red): Set Off: Cancel Automatic Transfer at Department Number...
Page 240 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number Extension Number Voice Mail (In-Skin) <InMail> or Pilot Number Fast flash(Green): New Message(s) in own Mailbox.
Page 241 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] Normal Function Code (00 ~ 99) (Service Code 851 (OT) / 751(AU)) Function Function Additional Data LED Indication Number PRG 22-17 Table Off: Pattern 1, Pattern 5~8 Dial-In Mode Switching On: Pattern 2...
Page 242 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [2] Appearance Function Level (*00 ~*99) (Service Code 852 (OT) / 752 (AU)) Trunk Number Red On: Trunk Busy by Another  Trunk Key (001~200) User Green On: Trunk Busy by Extension...
Page 243 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [2] Appearance Function Level (*00 ~*99) (Service Code 852 (OT) / 752 (AU)) Red On: Under Monitor  ACD Terminal Speech Monitor Red On: Standby  ACD Waiting Red On: Under Work Time ...
Page 244 Issue 10.1 UNIVERGE SV8100 LED Indication Reference: ON = LED pattern 7 (On). OFF = LED pattern 0 (Off). Rapid Blink = LED pattern 3 (RW). Slow Blink (General Function Level) = LED pattern 5 (IL). Slow Blink (Appearance Function Level) = LED pattern 1 (FL).
Page 245 UNIVERGE SV8100 Issue 10.1 752 (AU) + 04 must be undefined by dialing 852(OT) / 752 (AU) + 000 before it  can be programmed as a Voice Over key by dialing 851(OT)/ 751 (AU) + 48. Feature Cross Reference...
Page 246: Incoming Virtual Extension Ring Tone Setup
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-08 : Incoming Virtual Extension Ring Tone Setup Level: Description Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range (0~4) to incoming virtual extensions assigned to a Virtual Extension key (Program 15-07).
Page 247: Table 2-6 Program 15-08 - Incoming Signal Frequency Patterns
UNIVERGE SV8100 Issue 10.1 Table 2-6 Program 15-08 – Incoming Signal Frequency Patterns Incoming Signal Frequency Type Frequency 1 Frequency 2 Modulation Pattern Pattern 1 High 1100 1400 16Hz Middle 16Hz 16Hz Pattern 2 High 1100 1400 Middle Pattern 3...
Page 248: Virtual Extension Ring Assignment
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-09 : Virtual Extension Ring Assignment Level: Description Use Program 15-09 : Virtual Extension Ring Assignment to assign the ringing options for an extension Virtual Extension Key or Virtual Extension Group Answer Key which is defined in Program 15-07.
Page 249: Incoming Virtual Extension Ring Tone Order Setup
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-10 : Incoming Virtual Extension Ring Tone Order Setup Level: Description Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set the priority (1~4) for the Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension simultaneously, the tone with the highest order number (e.g., 1) rings.
Page 250 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 214 Program 15 : Extension, Basic Setup...
Page 251: Virtual Extension Delayed Ring Assignment
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-11 : Virtual Extension Delayed Ring Assignment Level: Description Use Program 15-11 : Virtual Extension Delayed Ring Assignment to assign the delayed ringing options for an extension Virtual Extension or Virtual Extension Group Answer keys (defined in Program 15-09).
Page 252: Conversation Recording Destination For Extensions
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-12 : Conversation Recording Destination for Extensions Level: Description Use Program 15-12 : Conversation Recording Destination for Extensions to set the ACI Conversation Recording destination for each extension.  If both Programs 14-09 and 15-12 define a destination, the destination in Program 15-12 is followed.
Page 253: Loop Keys (Ot)
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-13 : Loop Keys (OT) Level: Description Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset terminal. Loop Keys can be incoming, outgoing or both ways. Outgoing Loop Keys use the entry in item 1.
Page 254: Programmable One-Touch Keys
Use Program 15-14 : Programmable One-Touch Keys to define the One-Touch key data for each multiline terminal. For each UNIVERGE SV8100 Wireless telephone to use the Transfer When Out of Range feature, enter the destination number (up to 24 digits) and name (up to 12 characters) into One-Touch bin 10.
Page 255: Sip Register Id Setup For Extension
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-16 : SIP Register ID Setup for Extension Level: Description Use Program 15-16 : SIP Register Setup for Extension to define the SIP Register ID for Extensions. Input Data Extension Number Maximum eight digits Item No.
Page 256: Co Message Waiting Indication
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-17 : CO Message Waiting Indication Level: Description Use Program 15-17 : CO Message Waiting Indication to set the message waiting LED Flash assignment on each CO line. Input Data...
Page 257: Virtual Extension Key Enhanced Options
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-18 : Virtual Extension Key Enhanced Options Level: Description Use Program 15-18 : Virtual Extension Key Enhanced Options to define the operation when a Virtual Extension Key is pressed. Input Data...
Page 258 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 0 = Do not show 15-09-01 Show Internal Caller Information 15-18-03 1 = Show When set to a 0, internal calls to the virtual extension will not show the name or number of the extension that is calling.
Page 259: System Telephone Book Setup For Extension
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-19 : System Telephone Book Setup for Extension Level: Description Use Program 15-19 : System Telephone Book Setup for Extension to set the operations of the Telephone Book for each extension.
Page 260: Lcd Line Key Name Assignment
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-20 : LCD Line Key Name Assignment Level: Description Use Program 15-20 : LCD Line Key Name Assignment to assigns a name to each LCD Line Key of the SV8100 telephones and ADM option. Up to 13 characters can be assigned.
Page 261: Mobile Extension Setup
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-22 : Mobile Extension Setup Level: Description Use Program 15-22 : Mobile Extension Setup to set the system information for the Mobile Extension feature. Input Data Extension Number Up to eight digits...
Page 262 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference None 2 - 226 Program 15 : Extension, Basic Setup...
Page 263: Incoming Virtual Extension Large Led Setup
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-23 : Incoming Virtual Extension Large LED Setup Level: Description Use Program 15-23 : Incoming Virtual Extension Large LED Setup to set the color of the large LED, when the Virtual Extension rings.
Page 264: Registration Of Standard Sip Terminal
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-24 : Registration of Standard SIP Terminal Level: Description Use Program 15-24 : Registration of Standard SIP Terminal to register data in the standard SIP terminal where Register is not used.
Page 265: Desi-Less
UNIVERGE SV8100 Issue 10.1 Program 15 : Extension, Basic Setup 15-25 : DESI-less Page Setup Level: Description Use Program 15-25 : DESI-less Page Setup to define the page of each DESI-less extension. Input Data Extension Number Up to eight digits...
Page 266: Power Saving Setup
Issue 10.1 UNIVERGE SV8100 Program 15 : Extension, Basic Setup 15-27 : Power Saving Setup Level: Description Use Program 15-27 : Power Saving Setup to set the power saving mode for extensions. Input Data Extension Number Up to eight digits...
Page 267: Program 16 : Department Group Setup
Program 16 : Department Group Setup 16-01: Department Group Basic Data Setup Level: Description Use Program 16-01: Department Group Basic Data Setup to set the function mode for each department group. There are 64 available Department Program Groups. Input Data Department Group Number 1~64 Item...
Page 268 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program = Last extension is Hunting Mode called and hunting Use this option to set the action is stopped taken when a call reaches the = Circular last extension in the Department...
Page 269 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program = No hunting Enhanced Hunt Type = Hunting When Set the type of hunting for each Busy Extension (Department) Group. = Hunting When Not Answered = Hunting When Busy or No...
Page 270: 16-02: Department Group Assignment For Extensions
Issue 10.1 UNIVERGE SV8100 Program 16 : Department Group Setup 16-02: Department Group Assignment for Extensions Level: Description Use Program 16-02: Department Group Assignment for Extensions to set the Department Groups. The system uses these groups (64 Department Groups) for Department Calling.
Page 271: 16-03: Secondary Department Group
UNIVERGE SV8100 Issue 10.1 Program 16 : Department Group Setup 16-03: Secondary Department Group Level: Description Use Program 16-03: Secondary Department Group to set a second Department Group for extensions. Up to 16 extensions can be assigned per a Department Group.
Page 272: 16-04: Call Restriction Between Department Groups
Issue 10.1 UNIVERGE SV8100 Program 16 : Department Group Setup 16-04: Call Restriction Between Department Groups Level: Description Use Program 16-04: Call Restriction Between Department Groups to set internal calls between members of different Department (Station) groups that can be restricted on a per group basis.
Page 273: Program 20 : System Option Setup
Program 20 : System Option Setup 20-01 : System Options Level: Description Use Program 20-01 : System Options to set various system options. Program Input Data Item Related Item Input Data Default Description Program = Step Call Use this program to set 20-17 Operator Access Mode...
Page 274 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default Description Program 0~64800s 64800s 11-12-05 The system cancels an Callback/Trunk 15-07-35 Queuing Cancel extension Callback or Time Trunk Queueing request after this time. 0~64800s The amount of time the...
Page 275: System Options For Multiline Telephones
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-02 : System Options for Multiline Telephones Level: Description Use Program 20-02 : System Options for Multiline Telephones to set various system options for multiline telephones. Input Data Item Related...
Page 276 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Item Input Data Default Program = Not Holding (No Keep) 0 (OT) Retrieve the Line 1 (AU) After Transfer = Holding (Keep) Enable (1) or disable (0) an extension ability to answer a call after it...
Page 277 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Related Item Input Data Default Program = Off Handsfree Microphone Control = On Use this option to control the setting for Multiline Terminal Handsfree microphone after being disconnected and reconnected. If set to...
Page 278 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Item Input Data Default Program 0 = Off 11-01 F-Route Outgoing 11-20 Mode From Incoming 1 = On Call History Enable or Disable the ability to route Calls in the Call History via F-...
Page 279: System Options For Single Line Telephones
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-03 : System Options for Single Line Telephones Level: Description Use Program 20-03 : System Options for Single Line Telephones to set up various options for single line telephones. Input Data...
Page 280 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default Program 0~64800s 3 (OT) 20-03-03 Dial Sending Start Time for SLT or ARS 1 (AU) When ARS or an analog extension user accesses a trunk and dials an outside call, the system waits this time before outdialing the first digit.
Page 281: System Options For Virtual Extensions
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-04 : System Options for Virtual Extensions Level: Description Use Program 20-04 : System Options for Virtual Extensions to set up various system options for Virtual Extensions. There are 256 available virtual extension ports.
Page 282: Class Of Service For Extensions
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-06 : Class of Service for Extensions Level: Description Use Program 20-06: Class of Service for Extensions to assign a Class of Service (COS) to an extension. There are 15 Classes of Service that can be assigned. To specify the options in each Class of Service, refer to Programs 20-07 through 20-13.
Page 283: Class Of Service Options (Administrator Level)
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-07 : Class of Service Options (Administrator Level) Level: Description Use Program 20-07: Class of Service Options (Administrator Level) to define the administrator service availability for each extension Class of Service (COS).
Page 284 Issue 10.1 UNIVERGE SV8100 Default Item Input Related Item Data COS 15 1~15 1~14 (AU) (OT) (AU) 0 = Off Programmable Function Key Programming (Appearance Level) 1 = On 11-11-38 Turns off or on the ability for an 20-13-18 extension user ability to program the Appearance function keys using Service Code 852 (OT) / 752 (AU).
Page 285 UNIVERGE SV8100 Issue 10.1 Default Item Input Related Item Data COS 15 1~15 1~14 (AU) (OT) (AU) 0 = Off Set/Cancel Private Call Refuse 1 = On Enable or Disable an extension 11-10-32 ability to set or cancel Private Call Refuse.
Page 286: Class Of Service Options (Outgoing Call Service)
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-08 : Class of Service Options (Outgoing Call Service) Level: Description Use Program 20-08 : Class of Service Options (Outgoing Call Service) to define the outgoing call feature availability for each extension Class of Service (COS).
Page 287 UNIVERGE SV8100 Issue 10.1 Default Item Related Item Input Data COS 01-15 0 = Off Toll Restriction Dial Block 1 = On Turns off or on an extension to use Dial Block. 0 = Off Hotline/Extension Ringdown 1 = On Turns off or on Ringdown Extension for extensions with this COS.
Page 288 Issue 10.1 UNIVERGE SV8100 Default Item Related Item Input Data COS 01-15 0 = Off Hotline for SPK 1 = On The ability of an extension to have 20-08-09 Hotline activated or deactivated when going off hook via the speaker key.
Page 289: Class Of Service Options (Incoming Call Service)
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-09 : Class of Service Options (Incoming Call Service) Level: Description Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call feature availability for each extension Class of Service (COS).
Page 290 Issue 10.1 UNIVERGE SV8100 Default Item Related Item Input Data Program COS 01~15 0 = Off Incoming Time Display 1 = On 0 = Off Call Queuing 1 = On Turn off or on an extension ability to have calls...
Page 291: Class Of Service Options (Answer Service)
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-10 : Class of Service Options (Answer Service) Level: Description Use Program 20-10 : Class of Service Options (Answer Service) to define the answer feature availability for each extension Class of Service (COS).
Page 292 Issue 10.1 UNIVERGE SV8100 Default Item Item Input Data COS 01~15 0 = Off Call Pickup Callback 0 (OT) 1 = On Turn off or on an extension ability to use Call Pickup to pick 1 (AU) up Callback calls.
Page 293: Class Of Service Options (Hold/Transfer Service)
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-11 : Class of Service Options (Hold/Transfer Service) Level: Description Use Program 20-11 : Class of Service Options (Hold/Transfer Service) to define the Hold and Transfer feature availability for each extension Class of Service (COS).
Page 294 Issue 10.1 UNIVERGE SV8100 Default Item Item Input Data COS 01~15 0 = Off Group Hold Initiate 1 = On Turns off or on an extension ability to initiate a Group Hold. 0 = Off Group Hold Answer 1 = On Turns off or on an extension ability to pick up a call on Group Hold.
Page 295 UNIVERGE SV8100 Issue 10.1 Default Item Item Input Data COS 01~15 0 = Allow Restriction for Tandem Trunking on Hang Up 1 = Deny Allow (0) or Deny (1) an extension user ability to set up a tandem/conference call automatically when they hang up.
Page 296: Class Of Service Options (Charging Cost Service)
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-12 : Class of Service Options (Charging Cost Service) Level: Level: IN (OT) MF (AU) Description Use Program 20-12 : Class of Service Options (Charging Cost Service) to define the Charging Cost service availability for each extension service class.
Page 297: Class Of Service Options (Supplementary Service)
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-13 : Class of Service Options (Supplementary Service) Level: Description Use Program 20-13 : Class of Service Options (Supplementary Service) to define the supplementary feature availability for each extension Class of Service (COS).
Page 298 Issue 10.1 UNIVERGE SV8100 Default Item Item Input Data Related PRG COS 01~15 0 = Off Privacy Release 1 = On Turns off or on an extension user ability to initiate a Voice Call Conference. 0 = Speech Barge-In Monitor...
Page 299 UNIVERGE SV8100 Issue 10.1 Default Item Item Input Data Related PRG COS 01~15 0 = Off Account Code/Toll Restriction Operator Alert (Restricted Operation Transfer) 1 = On 1(OT) Turns off or on operator alert when an 0 (AU) extension user improperly enters an Account Code or violates Toll Restriction.
Page 300 Issue 10.1 UNIVERGE SV8100 Default Item Item Input Data Related PRG COS 01~15 0 = Off Deny Multiple Barge-Ins 1 = On Allows or Denies an extension from having multiple users Barge into their conversation. 0 = Off ACD Supervisor’s Position Enhancement...
Page 301 UNIVERGE SV8100 Issue 10.1 Default Item Item Input Data Related PRG COS 01~15 0 = Enable MIC Key Mode while Call Monitoring 1 = Disable Set per class of service, when in Call 0 (OT) 20-13-10 Monitoring Mode determines if the monitored...
Page 302 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Class of Service  2 - 266 Program 20 : System Option Setup...
Page 303: Class Of Service Options For Disa/E&M
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-14 : Class of Service Options for DISA/E&M Level: Description Use Program 20-14: Class of Service Options for DISA/E&M to enable/disable DISA and tie line Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09.
Page 304 Issue 10.1 UNIVERGE SV8100 Default Item Input Item Data COS 1~15 0 (OT) 0 = Off Internal Paging 1 (AU) 1 = On This option enables or disables a DISA or tie trunk caller ability to use the telephone system Internal Paging.
Page 305: Ring Cycle Setup
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-15 : Ring Cycle Setup Level: Description Use Program 20-15 : Ring Cycle Setup to define the ringing cycles for each ring type. Input Data Ringing Item No. Incoming Signal Type...
Page 306: Table 2-7 Ringing Cycles
Issue 10.1 UNIVERGE SV8100 Table 2-7 Ringing Cycles Number Ringing Cycle On:2.0 / Off:4.0 On:1.0 / Off:2.0 On:0.5 / Off:0.5 On:0.25 / Off:0.25 On:0.5 / Off:0.5 / On:0.5 / Off:1.5 On:0.25 / Off:0.25 / On:0.25 / Off:5.25 On:0.375 / Off:0.25 / On:0.375 / Off:2.0 On:0.25 / Off:0.125 / On:0.25 / Off:0.125 / On:0.25 / Off:2.0...
Page 307: Selectable Display Messages
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-16 : Selectable Display Messages Level: Description Use Program 20-16 : Selectable Display Messages to enter the Selectable Display Messages. There are 20 alphanumeric messages, with up to 24 characters. Use the following chart when programming messages.
Page 308 Issue 10.1 UNIVERGE SV8100 When using DTP or DTU style telephones on the UNIVERGE SV8100 system, not all the same characters are available. Input Data Selectable Display Message Number 01~20 Item Input Data Default 24 characters See Below Default Number...
Page 309 UNIVERGE SV8100 Issue 10.1 Conditions Time value must be followed by two spaces.  Feature Cross Reference Selectable Display Messages  Programming Manual 2 - 273...
Page 310: Operator Extension
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-17 : Operator Extension Level: Description Use Program 20-17 : Operator Extension to designate an operator. When an extension user dials 0 or 9 (defined by Program 11-01 Type 5), calls go to the operator selected in this program.
Page 311: Service Tone Timers
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-18 : Service Tone Timers Level: Description Use Program 20-18: Service Tone Timers to set the values for the system service tone timers. Refer to the following chart for a description of each option, its range and default setting.
Page 312 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Distinctive Ringing, Tones, and Flash Patterns  2 - 276 Program 20 : System Option Setup...
Page 313: System Options For Caller Id
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-19 : System Options for Caller ID Level: Description Use Program 20-19 : System Options for Caller ID to define the system options for the Caller ID feature. Input Data...
Page 314 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Caller ID  2 - 278 Program 20 : System Option Setup...
Page 315: Message Setup For Non-Caller Id Data
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-20 : Message Setup for Non-Caller ID Data Level: Description Use Program 20-20 : Message Setup for Non-Caller ID Data to define the messages which are displayed when no Caller ID information is received.
Page 316: System Options For Long Conversation
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-21 : System Options for Long Conversation Level: Description Use Program 20-21 : System Options for Long Conversation to define the system options for the Long Conversation feature. Input Data...
Page 317: System Options For Wireless - Dect Service
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-22 : System Options for Wireless – DECT Service Level: Description Use Program 20-22 : System Options for Wireless – DECT Service to define the time the system waits before determining the Wireless – DECT phone is out of range.
Page 318: System Options For Cti
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-23 : System Options for CTI Level: Description Use Program 20-23 : System Options for CTI to define the system options for the CTI feature. Input Data Item Item Input Data...
Page 319: Isdn Options
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-25 : ISDN Options Level: Description Use Program 20-25 : ISDN Options to define the ISDN system options. Input Data Item Item Input Data Default = Service Off Send the Release Message After Subscriber Hangs...
Page 320 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = Disable (Off) 1 (OT) Automatic Changing System Clock When Date/ 0 (AU) Time Information Element Received = Enable (On) = Normal – No Call Forward Options (Auto Connect Send)
Page 321: 20-26: Multiplier For Charging Cost
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-26: Multiplier for Charging Cost Level: Description Use Program 20-26: Multiplier for Charging Cost to define the Multiplier for charging cost to each extension service class. Input Data Service Class 1~15 Item No.
Page 322: Trunk To Trunk Conversation
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-28 : Trunk to Trunk Conversation Level: Description Use Program 20-28 : Trunk to Trunk Conversation to define system options for Trunk to Trunk Conversation. Input Data Item Related Item...
Page 323: Timer Class For Extension
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-29 : Timer Class for Extension Level: Description Use Program 20-29 : Timer Class for Extension to assign the timer class to each extension. There are 16 Classes that can be assigned. You make eight entries for this Program, one for each Night Service Mode.
Page 324: Timer Class For Trunks
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-30 : Timer Class for Trunks Level: Description Use Program 20-30 : Timer Class for Trunks to assign the timer class to each trunk. There are 16 Classes that can be assigned. You make eight entries for this Program, one for each Night Service Mode.
Page 325: Timer Class Timer Assignment
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-31 : Timer Class Timer Assignment Level: Description Use Program 20-31: Timer Class Timer Assignment to assign values to the timers on a class of service basis. Input Data Timer Class Number...
Page 326 Issue 10.1 UNIVERGE SV8100 Item Input Data Default Related Item (sec) (sec) 0~64800 22-01-03 Ring No Answer Alarm Time If a trunk rings a multiline telephone longer than this time, the system changes the ring cadence. This indicates to the user that the call has been ringing too long.
Page 327 UNIVERGE SV8100 Issue 10.1 Item Input Data Default Related Item (sec) (sec) 0~64800 24-02-03 Delayed Call Forwarding Time (Call Forward No Answer) If activated at an extension, Delayed Call Forwarding occurs after this time. This also sets how long a Transferred call waits at an extension forwarded to Voice Mail before routing to the called extension mailbox.
Page 328 Issue 10.1 UNIVERGE SV8100 Item Input Data Default Related Item (sec) (sec) 0 = Immediate 22-01-12 Mobile Extension Answer Time Answer (1~64800(sec)) 1~64800(sec) 22-01-16 Mobile Extension Callback Duration Time Conditions These timers are used when an extension or trunk is assigned to a class from 1 to ...
Page 329: 20-34: Remote Conference Group Setup
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-34: Remote Conference Group Setup Level: Description Use Program 20-34: Remote Conference Group Setup to define the Remote Conference options. Input Data Remote Conference Group Number Item Item Input Data...
Page 330 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Conference, Remote 2 - 294 Program 20 : System Option Setup...
Page 331: Extension's Operator Setting
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-35 : Extension’s Operator Setting Level: Description Use Program 20-35: Extension’s Operator Setting to assign an extension to an operator group. Input Data Extension Number Up to eight digits Item...
Page 332: Trunk's Operator Setting
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-36 : Trunk’s Operator Setting Level: Description Use Program 20-36: Trunk’s Operator Setting to assign a trunk to an operator group. Input Data Trunk Port Number 001~200 Item Item Input Data...
Page 333: Operator Extension Group Setup
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-37 : Operator Extension Group Setup Level: Description Use Program 20-37 : Operator Extension Group Setup to define the operator(s) in the operator group. Input Data Operator Group 1~15 Input Data...
Page 334: Operator Group Setting
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-38 : Operator Group Setting Level: Description Use Program 20-38 : Operator Group Setting to set up priority of a call when calling an operator telephone. Input Data Operator Group...
Page 335: Watch Mode Setup
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-44 : Watch Mode Setup Level: Description (This program is aviable for V7000 or higher) Use Program 20-44 : Watch Mode Setup to set system options for Watch Message. Item...
Page 336: Remote Watch Setup
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-45 : Remote Watch Setup Level: Description (This program is aviable for V7000 or higher) Use Program 20-45 : Remote Watch Setup to configure Remote Monitor settings. Input Data Terminal Number...
Page 337: Security Sensor Setup
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-46 : Security Sensor Setup Level: Description (This program is aviable for V7000 or higher) Use Program 20-46 : Security Sensor Setup to set system Security Sensor options. Input Data...
Page 338 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 = Not Used General Contact Detector Circuit Setup 1~8 (Detector Circuit Numbers) Conditions None Feature Cross Reference None 2 - 302 Program 20 : System Option Setup...
Page 339: Time Pattern Setting For Watch Mode
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-47 : Time Pattern Setting for Watch Mode Level: Description (This program is aviable for V7000 or higher) Use Program 20-47 : Time Pattern Setting for Watch Mode to assign the Watch Mode time pattern.
Page 340: Time Pattern Setting For Security Sensor
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-48 : Time Pattern Setting for Security Sensor Level: Description (This program is aviable for V7000 or higher) Use Program 20-48 : Time Pattern Setting for Security Sensor to assign the Security Sensor time pattern.
Page 341: Night Mode Group Assignment For Power Save Group
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-53 : Night Mode Group Assignment for Power Save Group Level: Description (This program is aviable for V7000 or higher) Use Program 20-53 : Night Mode Group Assignment for Power Save Group to assign the Night Mode Service Group Number into the Power Save Group.
Page 342: Power Supply Mode For Each Power Save Group
Issue 10.1 UNIVERGE SV8100 Program 20 : System Option Setup 20-54 : Power Supply Mode for each Power Save Group Level: Description (This program is aviable for V7000 or higher) Use Program 20-54 : Power Supply Mode for each Power Save Group to assign the Power Saving Mode in each Power Saving group and Night mode.
Page 343: Delay Timer For Security Sensor
UNIVERGE SV8100 Issue 10.1 Program 20 : System Option Setup 20-55 : Delay Timer for Security Sensor Level: Description (This program is aviable for V7000 or higher) Use Program 20-55 : Delay Timer for Security Sensor to set the interval for the Sensor Delay Timer.
Page 344 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 308 Program 20 : System Option Setup...
Page 345: Program 21 : Outgoing Call Setup
Program 21 : Outgoing Call Setup 21-01 : System Options for Outgoing Calls Level: Description Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing Call Service. Program Input Data Item Related Item Input Data Default Program = Priority...
Page 346 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default Program 0~64800 (sec) 0 (OT) Disconnect Time when Dial Tone 3 (AU) not Detected If 14-02-11 is enabled, the system skips over a trunk if dial tone is not detected.
Page 347 UNIVERGE SV8100 Issue 10.1 Input Data Item Related Item Input Data Default Program = Trunk 1 (OT) Dial E911 Routing Without Trunk 0 (AU) Access Access Code If enabled (1), an extension user can dial 911 (USA only) without first...
Page 348 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Central Office Calls, Placing  2 - 312 Program 21 : Outgoing Call Setup...
Page 349: Trunk Group Routing For Extensions
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-02 : Trunk Group Routing for Extensions Level: Description Use Program 21-02 : Trunk Group Routing for Extensions to assign Program 14-06 routes to extensions. Input Data Extension Number Maximum eight digits...
Page 350: Trunk Group Routing For Trunks
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-03 : Trunk Group Routing for Trunks Level: Description Use Program 21-03 : Trunk Group Routing for Trunks to set the Trunk Route Table for Automatic External Call Forward. The Route Table is set in Program 14-06.
Page 351: Toll Restriction Class For Extensions
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-04 : Toll Restriction Class for Extensions Level: Description Use Program 21-04 : Toll Restriction Class for Extensions to assign a Toll Restriction class to an extension. The details of Toll Restriction are defined in Program 21-05 and 21-06.
Page 352: Toll Restriction Class
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-05 : Toll Restriction Class Level: Description Use Program 21-05: Toll Restriction Class to set the system Toll Restriction classes (1~15). Input Data Toll Restriction Class Number 1~15 Item Related...
Page 353 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Description 1~4 = Table 1-6, 8-15 = 0 21-06-06 Set the tables 1~4 when Permit Code Table (OT) referring to the table set up = Disable by 21-06-06. (None) 7 = 1 (OT)
Page 354 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Description = Disable 1~6, 8~15 = Use this option to set how PBX Call Restriction the system Toll Restricts (No) calls over PBX trunks. If you = Enable 7 = 1...
Page 355 UNIVERGE SV8100 Issue 10.1 Default (OT) Toll Restriction Class Item 01: International Call Restrict Table 02: International Call Permit Table 04: Max. No. Digits Table Assign. 05: Common Permit Table 06: Common Restrict Table 07: Permit Code Table 08: Restrict Code Table 09: Restriction for Common Abbr.
Page 356 Issue 10.1 UNIVERGE SV8100 (AU) Toll Restriction Class 11: Intercom Call Restriction 12: Restriction of PBX Calls 13: Restriction of Tie Line Calls 14: Restriction for Incomplete Dialed Trunk Transfer 15: Allow the Outgoing Trunk to Common Hold Conditions None...
Page 357: Toll Restriction Table Data Setup
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-06 : Toll Restriction Table Data Setup Level: Description Use Program 21-06: Toll Restriction Table Data Setup to set the system Toll Restriction data. Dial 1-9, 0, , # can be entered in each table.
Page 358 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Table Input Data Default Description Dial This option lets you program the Table 1 4 = No Setting Deny Restriction Table Restrict Code Tables. If the system (Up to 12 (table) has Toll Restriction enabled, users...
Page 359: Toll Restriction Override Password Setup
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-07 : Toll Restriction Override Password Setup Level: Description Use Program 21-07: Toll Restriction Override Password Setup to assign Toll Restriction Override codes to extension ports. Each code must have four digits, using any combination of 0~9, # and .
Page 360: Repeat Dial Setup
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-08 : Repeat Dial Setup Level: Description Use Program 21-08 : Repeat Dial Setup to define the automatic Repeat Dial data. Input Data Item Item Input Data Default 0~255 (OT)
Page 361: Dial Block Setup
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-09 : Dial Block Setup Level: Description Use Program 21-09 : Dial Block Setup to define the Dial Blocking Toll Restriction Class and Dial Block Password to be used by the Supervisor extension.
Page 362: Dial Block Restriction Class Per Extension
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-10 : Dial Block Restriction Class Per Extension Level: Description Use Program 21-10 : Dial Block Restriction Class Per Extension to define the Toll Restriction Class to each extension when the extension is set for Dial Block Restriction.
Page 363: Extension Ringdown (Hotline) Assignment
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-11 : Extension Ringdown (Hotline) Assignment Level: Description Use Program 21-11 : Extension Ringdown (Hotline) Assignment to define the Hotline destination number for each extension number. Input Data Extension Number...
Page 364: Isdn Calling Party Number Setup For Trunks
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-12 : ISDN Calling Party Number Setup for Trunks Level: Description Use Program 21-12 : ISDN Calling Party Number Setup for Trunks to assign Calling Party Numbers for each trunk (maximum 16 digits per entry). When a call is...
Page 365: Isdn Calling Party Number Setup For Extensions
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-13 : ISDN Calling Party Number Setup for Extensions Level: Description Use Program 21-13: ISDN Calling Party Number Setup for Extensions to assign each extension a Calling Party Number (maximum 16 digits per entry). The calling number is the subscriber number of the dial-in number.
Page 366: Walking Toll Restriction Password Setup
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-14 : Walking Toll Restriction Password Setup Level: Description Use Program 21-14: Walking Toll Restriction Password Setup to assign the password and Toll Restriction Class for Walking Toll Restriction. Each code has six digits, using any combination of 0~9, ...
Page 367: Individual Trunk Group Routing For Extensions
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-15 : Individual Trunk Group Routing for Extensions Level: Description Use Program 21-15: Individual Trunk Group Routing for Extensions to designate the alternate trunk access route accessed when a user dials the Alternate Trunk Route Access Code.
Page 368: 21-16: Trunk Group Routing For Networks (Ot)
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-16: Trunk Group Routing for Networks (OT) Level: Description Use Program 21-16: Trunk Group Routing for Networks to assign Program 14-06 routes for a network system. This is required to seize the trunk in a network system (Extension in System A tries to make an external call using a trunk in System B).
Page 369: Ip Trunk (Sip) Calling Party Number Setup For Trunk
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-17 : IP Trunk (SIP) Calling Party Number Setup for Trunk Level: Description Use Program 21-17 : IP Trunk (SIP) Calling Party Number Setup for Trunk set the SIP calling party number for individual trunks.
Page 370: 21-18: Ip Trunk (H.323) Calling Party Number Setup For Extension
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-18: IP Trunk (H.323) Calling Party Number Setup for Extension Level: Description Use Program 21-18: IP Trunk (H.323) Calling Party Number Setup for Extension to assign the Calling Party Number for each extension. The assigned number is sent to the exchange when the caller places an outgoing call.
Page 371: Ip Trunk (Sip) Calling Party Number Setup For Extension
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-19 : IP Trunk (SIP) Calling Party Number Setup for Extension Level: Description Use Program 21-19 : IP Trunk (SIP) Calling Party Number Setup for Extension to set the SIP calling party number for an individual extension.
Page 372: Toll Restriction For Trunks (Seized Trunk Basis Setting)
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-21 : Toll Restriction for Trunks (Seized Trunk Basis Setting) Level: Description Use Program 21-21 : Toll Restriction for Trunks (Seized Trunk Basis Setting) to define the toll restriction class to each trunk. The details of toll restriction are defined by PRG 21-05 and 21-06.
Page 373: Co Message Waiting Indication - Call Back Settings
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-22 : CO Message Waiting Indication – Call Back Settings Level: Description Use Program 21-22 : CO Message Waiting Indication – Call Back Settings to define the settings of CO Message Waiting Indication.
Page 374: 21-24: Forced Access Dial Data
Issue 10.1 UNIVERGE SV8100 Program 21 : Outgoing Call Setup 21-24: Forced Access Dial Data Level: Description Use Program 21-24: Forced Access Dial Data to set for Emergency number data. First digit of dialing data should be same as trunk access code.
Page 375: Extended Table Number
UNIVERGE SV8100 Issue 10.1 Program 21 : Outgoing Call Setup 21-25 : Extended Table Number Level: Description Use Program 21-25 : Extended Table Number to define CLI number to trunk. This Extended Table Number is used only when PRG14-01-38 is set to ‘2’.
Page 376 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 340 Program 21 : Outgoing Call Setup...
Page 377: Program 22 : Incoming Call Setup
Program 22 : Incoming Call Setup 22-01: System Options for Incoming Calls Level: Description Use Program 22-01: System Options for Incoming Calls to define the system options for incoming calls. Program Input Data Item Related Item Input Data Default Description Program = Intercom Use this option to determine if Intercom...
Page 378 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default Description Program 0~64800 (sec) DID to Trunk to Trunk no answer timer = Enable 22-14 Set up the operation mode for Auto VRS Waiting 22-15 Message Attendant and Queuing Message.
Page 379: 22-02: Incoming Call Trunk Setup
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-02: Incoming Call Trunk Setup Level: Description Use Program 22-02: Incoming Call Trunk Setup to assign the incoming trunk type for each trunk. There is one item for each Night Service Mode.
Page 380 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Central Office Calls, Answering  2 - 344 Program 22 : Incoming Call Setup...
Page 381: 22-03: Trunk Ring Tone Range
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-03: Trunk Ring Tone Range Level: Description Use Program 22-03: Trunk Ring Tone Range to select the ring tone range for the trunk. The trunk uses a ring tone in the range selected when it rings an extension.
Page 382 Issue 10.1 UNIVERGE SV8100 Table 2-8 Program 22-03 – Incoming Signal Frequency Patterns Pattern 6 High 1400Hz 540Hz Middle 760Hz 540Hz 660Hz 540Hz Pattern 7 High 2000 1100Hz 16Hz Middle 2000 540Hz 16Hz 1100 760Hz 16Hz Pattern 8 High 2000...
Page 383: 22-04: Incoming Extension Ring Group Assignment
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-04: Incoming Extension Ring Group Assignment Level: Description Use Program 22-04: Incoming Extension Ring Group Assignment to assign extensions to Ring Groups. Calls ring extensions according to Ring Group programming. Use Program 22-05 to assign trunks to Ring Groups and use Program 22-06 to set the ringing for the phones.
Page 384: 22-05: Incoming Trunk Ring Group Assignment
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-05: Incoming Trunk Ring Group Assignment Level: Description Use Program 22-05: Incoming Trunk Ring Group Assignment to assign trunks to incoming Ring Groups. There are 100 available Ring Groups. Input Data...
Page 385: 22-06: Normal Incoming Ring Mode
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-06: Normal Incoming Ring Mode Level: Description Use Program 22-06: Normal Incoming Ring Mode to define whether or not an extension should ring for the Normal Incoming Ring Mode. Input Data...
Page 386: 22-07: Dil Assignment
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-07: DIL Assignment Level: Description Use Program 22-07: DIL Assignment to assign the destination extension or Department Calling Group for each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring Group programming. If an extension has a line key, the DIL rings the line key.
Page 387: 22-08: Dil/Irg No Answer Destination
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-08: DIL/IRG No Answer Destination Level: Description For DIL Delayed Ringing, use Program 22-08: DIL/IRG No Answer Destination to assign the DIL No Answer Ring Group. An unanswered DIL rings this group after the DIL No Answer Time expires (Program 22-01-04).
Page 388: 22-09: Did Basic Data Setup
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-09: DID Basic Data Setup Level: Description Use Program 22-09: DID Basic Data Setup to define the basic setting of Dial-In incoming calls for each trunk group. Input Data Trunk Group Number...
Page 389 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = Disconnect (Cut) T302 Time-out Operation = Transfer (Refer to (Only Overlap Receiving Mode) Program 22-12: DID Intercept Ring Group on page 2-361.) Conditions None Feature Cross Reference Direct Inward Dialing (DID) ...
Page 390: 22-10: Did Translation Table Setup
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-10: DID Translation Table Setup Level: Description Use Program 22-10: DID Translation Table Setup to specify the size of the DID Translation Tables. There are 2000 Translation Table entries that you can allocate among 20 Translation Tables.
Page 391 UNIVERGE SV8100 Issue 10.1 Default Table Conversion Start Start Table Area Table Table Table Table Start Table Table (AU) (OT) (AU) 1000 1001 1200 1201 1400 1401 1600 1601 1800 1801 2000 Conditions None Feature Cross Reference Direct Inward Dialing (DID) ...
Page 392: 22-11: Did Translation Number Conversion
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-11: DID Translation Number Conversion Level: Description Use Program 22-11: DID Translation Table Number Conversion to specify for each Translation Table entry (2000). The digits received by the system (eight maximum) ...
Page 393 UNIVERGE SV8100 Issue 10.1 Key for Entering Names When entering names in the procedures below, refer to this chart. Names can have up to 12 digits. Use this keypad digit. . . When you want to. . . Enter characters: ...
Page 394 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 = No Setting Transfer Destination Number 1 1~100 = Incoming Group Transfer Destination Number 2 102 = In-Skin/External Voice Mail 400 - Allow the outside party to dial a or InMail...
Page 395 UNIVERGE SV8100 Issue 10.1 Default (OT) The default value of PRG22-11-01/PRG22-11-02 is shown as below. Conversion Table Received number Target number 2000 No Setting No Setting Default (AU) The default value of PRG22-11-01/PRG22-11-02 is shown as below. Conversion Table Received number...
Page 396 Issue 10.1 UNIVERGE SV8100 Conditions When the trunk type is set to 3 (DID) in 22-02-01, the DID Transfer Destination for  each DID feature is not supported. This feature is supported only for DID trunks when assigned as VRS.
Page 397: 22-12: Did Intercept Ring Group
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-12: DID Intercept Ring Group Level: Description For each DID Translation Table, use Program 22-12: DID Intercept Ring Group to define the first destination group for DID calls. Depending on the entry in Program 22-09-02 and 22-11-04, the incoming calls route...
Page 398 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Direct Inward Dialing (DID)  2 - 362 Program 22 : Incoming Call Setup...
Page 399: 22-13: Did Trunk Group To Translation Table Assignment
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-13: DID Trunk Group to Translation Table Assignment Level: Description to assign the Program 22-13: DID Trunk Group to Translation Table Assignment DID Trunk Groups to DID Translation Tables. DID trunks should be in their own group.
Page 400: 22-14: Vrs Delayed Message For Irg
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-14: VRS Delayed Message for IRG Level: Description Use Program 22-14: VRS Delayed Message for IRG (Incoming Group Ring) to define for each incoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
Page 401 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 365...
Page 402: 22-15: Vrs Delayed Message For Department Group
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-15: VRS Delayed Message for Department Group Level: Description Use Program 22-15: VRS Delayed Message for Department Group to define for each Department (Extension) Group the timers, VRS message number and tone kind for VRS Delayed Message.
Page 403 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Department Group  Programming Manual 2 - 367...
Page 404: 22-16: Private Call Refuse Target Area Setup
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-16: Private Call Refuse Target Area Setup Level: Description Use Program 22-16: Private Call Refuse Target Area Setup to define Speed Dial group number for Private Call Refuse. Item Item...
Page 405: 22-17: Dial-In Conversion Table Area Setup For Time Pattern
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-17: Dial-In Conversion Table Area Setup for Time Pattern Level: Description Use Program 22-17: Dial-In Conversion Table Area Setup for Time Pattern to define Time Zone and Dial-In Conversion Table (Program 22-11) for Time Pattern.
Page 406: 22-18: Private Call Assignment Setup
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-18: Private Call Assignment Setup Level: Description Use Program 22-18: Private Call Assignment Setup to define assignment and incoming ring pattern for Private Calls. Item Related Item Input Data Default...
Page 407: 22-19: Did Mfc Dialing Options (Ot)
UNIVERGE SV8100 Issue 10.1 Program 22 : Incoming Call Setup 22-19: DID MFC Dialing Options (OT) Level: Description Use Program 22-19: DID MFC Dialing Options to define the MFC Dialing for each DID table entry. This option is used for Latin America only.
Page 408: 22-20: Flexible Ringing By Caller Id Setup
Issue 10.1 UNIVERGE SV8100 Program 22 : Incoming Call Setup 22-20: Flexible Ringing by Caller ID Setup Level: Description Use Program 22-20: Flexible Ringing by Caller ID Setup to set flexible ringing by Caller ID per timer pattern mode. Input Data...
Page 409: Program 23 : Answer Features Setup
Program 23 : Answer Features Setup 23-02: Call Pickup Groups Level: Description Use Program 23-02: Call Pickup Groups to assign extensions to Call Pickup Groups. This program also lets you assign an extension Call Pickup Group Program priority. If two extensions in a group are ringing at the same time, Group Call Pickup intercepts the highest priority extension first.
Page 410: 23-03: Universal Answer/Auto Answer
(defined in Program 14-06). The extension user ringing calls, however, always have priority over calls ringing other co-worker extensions. Refer to the Line Preference feature in the UNIVERGE SV8100 Features and Specifications Manual for more information. Make one entry for each Night Service mode.
Page 411 UNIVERGE SV8100 Issue 10.0 Feature Cross Reference Line Preference  Night Service  Programming Manual 2 - 375...
Page 412: 23-04: Ringing Line Preference For Virtual Extensions
Issue 10.0 UNIVERGE SV8100 Program 23 : Answer Features Setup 23-04: Ringing Line Preference for Virtual Extensions Level: Description Use Program 23-04: Ringing Line Preference for Virtual Extensions to set the off-hook automatic response priority for calls ringing virtual extension keys on a telephone.
Page 413: Program 24 : Hold/Transfer Setup
Program 24 : Hold/Transfer Setup 24-01 : System Options for Hold Level: Description Use Program 24-01 : System Options for Hold to define the system options for the Hold feature. Program Input Data Item Related Item Input Data Default 0~64800s Hold Recall Time A call on Hold recalls the extension that placed it on Hold after this time.
Page 414 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Item Input Data Default 0~64800s 20-31-14 Park Hold Time – Normal A call left parked longer than this time recalls the extension that initially parked 0~64800s Park Hold Time – Extended (Recall)
Page 415: System Options For Transfer
UNIVERGE SV8100 Issue 10.1 Program 24 : Hold/Transfer Setup 24-02 : System Options for Transfer Level: Description Use Program 24-02 : System Options for Transfer to define the system options for the Transfer feature. Input Data Item Related Item Input Data...
Page 416 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Item Input Data Default Program 0~64800s 1800 14-01-25 Trunk-to-Trunk Transfer Release Warning 20-28-01 Tone 20-28-02 Time starts when a trunk begins talking with 20-28-03 another trunk (for example: trunk-to-trunk 24-02-10 transfer, outgoing from trunk, Tandem Trunking).
Page 417: Park Group
UNIVERGE SV8100 Issue 10.1 Program 24 : Hold/Transfer Setup 24-03 : Park Group Level: Description Use Program 24-03: Park Group to assign an extension to a Park Group. The system allows a total of 64 Park Groups. An extension user can pick up only a call parked in orbit by an extension users in their own group.
Page 418: Automatic Trunk-To-Trunk Transfer Target Setup
Issue 10.1 UNIVERGE SV8100 Program 24 : Hold/Transfer Setup 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup Level: Description Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign the Speed Dialing number bin which should be used as the destination of the Automatic Trunk-to-Trunk Transfer.
Page 419: Department Group Transfer Target Setup
UNIVERGE SV8100 Issue 10.1 Program 24 : Hold/Transfer Setup 24-05 : Department Group Transfer Target Setup Level: Description Use Program 24-05 : Department Group Transfer Target Setup to assign the Speed Dialing bin which is used as the destination of the extension for the Extension Group.
Page 420: Call Forward Split Settings
Issue 10.1 UNIVERGE SV8100 Program 24 : Hold/Transfer Setup 24-09 : Call Forward Split Settings Level: Description Use Program 24-09: Call Forward Split Settings to assign Call Forwarding Type and the destination number for each extension/virtual extension. The destination can have up to 24 digits, using 0~9, , #, P, R and @.
Page 421 UNIVERGE SV8100 Issue 10.1 Item Input Data Default None Call Forwarding Destination for CTX/PBX for All Call, No Answer: 0~9, , P, R, @  (Up to 24 digits) None Call Forwarding Destination for CTX/PBX for Busy: 0~9, , P, R, @ ...
Page 422 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 386 Program 24 : Hold/Transfer Setup...
Page 423: Program 25 : Vrs/Disa Setup
Program 25 : VRS/DISA Setup 25-01 : VRS/DISA Line Basic Data Setup Level: Description Use Program 25-01 : VRS/DISA Line Basic Data Setup to define the basic setting of each VRS/DISA line. Program Input Data Trunk Port Number 001~200 Item Related Item Input Data...
Page 424: Did/Disa Vrs Message
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-02 : DID/DISA VRS Message Level: Description Use Program 25-02 : DID/DISA VRS Message to assign the VRS message number to be used as the Automated Attendant Message for each trunk which is assigned as a VRS/DISA.
Page 425: Vrs/Disa Transfer Ring Group With Incorrect Dialing
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing Level: Description Use Program 25-03 : VRS/DISA Transfer Ring Group With Incorrect Dialing to set what happens to a call when the DISA or Automated Attendant caller dials incorrectly or waits too long to dial.
Page 426: Vrs/Disa Transfer Ring Group With No Answer/Busy
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-04 : VRS/DISA Transfer Ring Group With No Answer/Busy Level: Description Use Program 25-04 : VRS/DISA Transfer Ring Group With No Answer/Busy to set the operating mode of each DISA trunk. This sets what happens to the call when the DISA or Automated Attendant caller calls a busy or unanswered extension.
Page 427: Vrs/Disa Error Message Assignment
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-05 : VRS/DISA Error Message Assignment Level: Description Use Program 25-05: VRS/DISA Error Message Assignment to assign the VRS message number to be used as the Automated Attendant error message. For each VRS/DISA trunk that the VRS answers, enter the VRS message (1~100) the outside caller hears if they dial incorrectly.
Page 428: Vrs/Disa One-Digit Code Attendant Setup
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-06 : VRS/DISA One-Digit Code Attendant Setup Level: Description Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single digit dialing through the VRS. This gives VRS callers single key access to extensions, the company operator, Department Calling Groups and Voice Mail.
Page 429 UNIVERGE SV8100 Issue 10.1 Conditions Outside caller may not be able to dial individual extensions or lines if the same  first digit is defined here. Only one key dialing is supported for extension dialing.  Feature Cross Reference Direct Inward System Access (DISA) ...
Page 430: System Timers For Vrs/Disa
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-07 : System Timers for VRS/DISA Level: Description Use Program 25-07: System Timers for VRS/DISA to set the value for the system timers which affect DID and DISA. Refer to the following chart for a description of each option, its range and default setting.
Page 431 UNIVERGE SV8100 Issue 10.1 Input Data Item Input Related Item Default Data Program 0~64800 30 (OT) 14-01-25 Long Conversation Warning Tone Time 1800 20-28-01 (sec) Determine the time a DISA caller or any trunk-to-trunk (AU) 20-28-02 (such as Tandem Trunking) conversation can talk before 20-28-03 the Long Conversation tone is heard.
Page 432: Disa User Id Setup
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-08 : DISA User ID Setup Level: Description Use Program 25-08 : DISA User ID Setup to set the 6-digit DISA password for each user. There are 15 users each with one 6-digit password.
Page 433: Class Of Service For Disa Users
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-09 : Class of Service for DISA Users Level: Description Use Program 25-09 : Class of Service for DISA Users to set the DISA Class of Service for each user. When a DISA caller enters a password (defined in Program 25-08), the system identifies the user and associates the appropriate DISA Class of Service with the call.
Page 434: Trunk Group Routing For Disa
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-10 : Trunk Group Routing for DISA Level: Description Use Program 25-10: Trunk Group Routing for DISA to assign the Trunk Group route chosen when a user places a DISA call to the system and dials 9. Set Trunk Group Routing in Program 14-06.
Page 435: Disa Toll Restriction Class
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-11 : DISA Toll Restriction Class Level: Description For systems that use Toll Restriction, use Program 25-11: DISA Toll Restriction Class to assign a Toll Restriction Class (1-15) to each DISA user (1~15). The system uses the Toll Restriction Class you enter in Program 21-05 and 21-06.
Page 436: Alternate Trunk Group Routing For Disa
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-12 : Alternate Trunk Group Routing for DISA Level: Description Use Program 25-12: Alternate Trunk Group Routing for DISA to define the trunk route selected when a DISA caller dials the Alternate Trunk Access Code. The route selected is based on the DISA caller Class of Service, which in turn is determined by the password the caller dials.
Page 437: System Option For Disa
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-13 : System Option for DISA Level: Description Use Program 25-13: System Option for DISA to enter the password DISA callers must dial before the system allows them to record, listen to and or erase the VRS messages.
Page 438: 25-15: Dud/Disa Transfer Target Setup
Issue 10.1 UNIVERGE SV8100 Program 25 : VRS/DISA Setup 25-15: DUD/DISA Transfer Target Setup Level: Description Use Program 25-15: DUD/DISA Transfer Target Setup to assign a Speed Dial number when a dial tone times-out, or when the wrong number is received and the target extension does not answer or is busy.
Page 439: Dud/Disa Talkie Base Setup
UNIVERGE SV8100 Issue 10.1 Program 25 : VRS/DISA Setup 25-16 : DUD/DISA Talkie Base Setup Level: Description (This program is aviable for V7.00 or higher) Use Program 25-16 : DUD/DISA Talkie Base Setup to assign DUD/DISA timer values. Input Data...
Page 440 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 404 Program 25 : VRS/DISA Setup...
Page 441: Program 26 : Ars Service & Least Cost Routing
Program 26 : ARS Service & Least Cost Routing 26-01 : Automatic Route Selection Service Level: Description Use Program 26-01: Automatic Route Selection Service to define the system options for Automatic Route Selection (ARS). Program Input Data Item Related Trunk Access Code Description Default = Disable...
Page 442 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Trunk Access Code Description Default = Disable 26-02 Class of Service Match Access (Off) = Enable (On) = F-Route 26-02 F-Route Access COS Reference 44-05 = ARS 0 = Disable (Off)
Page 443: Dial Analysis Table For Ars/Lcr
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-02 : Dial Analysis Table for ARS/LCR Level: Description Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables for selecting Automatic Route Selection (ARS).
Page 444 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default 0~16 ARS Class of Service 0~15 Dial Treatment for ARS 0-25 LCR Carrier Table 26-12 0~16 Network Specified Parameter Table Conditions None Feature Cross Reference Automatic Route Selection  2 - 408...
Page 445: Ars Dial Treatments
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-03 : ARS Dial Treatments Level: Description Use Program 26-03: ARS to assign the 15 Dial Treatments for Dial Treatments automatic ARS dialing translation. Assign Dial Treatments to Service Numbers (Trunk Groups) in Program 26-02.
Page 446 Issue 10.1 UNIVERGE SV8100 Input Data Dial Treatment Table Number 1~15 Item Item Input Data Default 24 characters maximum No Setting Treatment Code Conditions None Feature Cross Reference Automatic Route Selection  2 - 410 Program 26 : ARS Service & Least Cost Routing...
Page 447: Ars Class Of Service
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-04 : ARS Class of Service Level: Description Use Program 26-04 : AR to set the ARS Class of Service for an S Class of Service extension. Automatic Route Selection uses ARS Class of Service when determining how to route extension calls.
Page 448: 26-05: Lcr Carrier Table
Issue 10.1 UNIVERGE SV8100 Program 26 : ARS Service & Least Cost Routing 26-05: LCR Carrier Table Level: Description Use Program 26-05: LCR Carrier Table to define the LCR Access Codes and routing options. These options include Authorisation codes and Cost Centre...
Page 449: 26-06: Lcr Authorisation Code Table
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-06: LCR Authorisation Code Table Level: Description Use Program 26-06: LCR Authorisation Code Table to define the optional Authorisation code (or PIN code) required by the Indirect Carrier. The Authorisation code is inserted if set in Program 26-05-03.
Page 450: 26-07: Lcr Cost Centre Code Table
Issue 10.1 UNIVERGE SV8100 Program 26 : ARS Service & Least Cost Routing 26-07: LCR Cost Centre Code Table Level: Description Use Program 26-07: LCR Cost Centre Code Table to define the optional cost centre code required by the Indirect Carrier. The cost centre code is set for each extension.
Page 451: 26-08: Lcr Manual Override Access Code Table
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-08: LCR Manual Override Access Code Table Level: Description Use Program 26-08: LCR Manual Override Access Code Table to define the access codes that the users can dial to select an indirect carrier i.e. bypass the automatic selection of Program 26-02.
Page 452: 26-09: Lcr Manual Override Exemption Table
Issue 10.1 UNIVERGE SV8100 Program 26 : ARS Service & Least Cost Routing 26-09: LCR Manual Override Exemption Table Level: Description Use Program 26-09: LCR Manual Override Exemption Table to define the numbers that must not be sent via an indirect carrier when the user dials a Manual Override Access Code.
Page 453: Transit Network Id Table
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-11 : Transit Network ID Table Level: Description Use Program 26-11 : Transit Network ID Table to define Transit Network ID for Alternate carrier access, which is referred from Program 26-03.
Page 454: 26-12: Network Specific Parameter Table For Ars
Issue 10.1 UNIVERGE SV8100 Program 26 : ARS Service & Least Cost Routing 26-12: Network Specific Parameter Table for ARS Level: Description Use Program 26-12: Network Specific Parameter Table for ARS to define the Network Specific Parameter Table. Input Data...
Page 455: Ars Class Of Service For Netlink (Dt700)
UNIVERGE SV8100 Issue 10.1 Program 26 : ARS Service & Least Cost Routing 26-13 : ARS Class of Service for NetLink (DT700) Level: Description (This program is aviable for V7000 or higher) Use Program 26-13 : ARS Class of Service for NetLink (DT700) sets an extension’s ARS Class of Service when used for NetLink.
Page 456 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 420 Program 26 : ARS Service & Least Cost Routing...
Page 457: Program 30 : Dss/Dls Console Setup
Program 30 : DSS/DLS Console Setup 30-01: DSS Console Operating Mode Level: Description Use Program 30-01: DSS Console Operating Mode to set the mode of the system DSS Consoles. The entry for this option applies to all the system DSS Program Consoles.
Page 458: 30-02: Dss Console Extension Assignment
Issue 10.1 UNIVERGE SV8100 Program 30 : DSS/DLS Console Setup 30-02: DSS Console Extension Assignment Level: Description Use Program 30-02: DSS Console Extension Assignment to identify which extensions have DSS Consoles connected. Up to 32 different extensions with DSS Consoles can be set up. A single extension ...
Page 459: 30-03: Dss Console Key Assignment
UNIVERGE SV8100 Issue 10.1 Program 30 : DSS/DLS Console Setup 30-03: DSS Console Key Assignment Level: Description Use Program 30-03: DSS Console Key Assignments to customize the key assignments for 60-button DSS Consoles. A DSS Console key can have any function with up to four digits (e.g., extension number or Service Code).
Page 460 Issue 10.1 UNIVERGE SV8100 Function Number List [1] General functional level (00~99) Function Function Additional Data LED Indication Number Extension Number Red On: Extension Busy DSS/One-Touch or any Numbers (up Off: Extension Idle to 24 digits) Rapid Blink (Red): DND or Call...
Page 461 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] General functional level (00~99) Function Function Additional Data LED Indication Number Slow Blink (Red): Forwarding Call Forward – Both Ring State Rapid Blink (Red): Forwarded State Slow Blink (Red): Forwarding Follow Me...
Page 462 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [1] General functional level (00~99) Function Function Additional Data LED Indication Number None Saved Number Redial None Memo Dial None Meet-me Conference None Override (Off-Hook Signaling) No data or None Barge – In Extension No.
Page 463 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] General functional level (00~99) Function Function Additional Data LED Indication Number None Exclusive Hold Red On: Logged Out Department Group Log Out Extension Number None Call Redirect or Voice Mail Number...
Page 464 Issue 10.1 UNIVERGE SV8100 Function Number List (Continued) [1] General functional level (00~99) Function Function Additional Data LED Indication Number None Flash Key Red On: Active Outgoing Call Without Caller ID (ISDN) - Not Used - 0 = Conversation Red On: Recording...
Page 465 UNIVERGE SV8100 Issue 10.1 Function Number List (Continued) [1] General functional level (00~99) Function Function Additional Data LED Indication Number 0 = Pause Conversation Recording Function 1 = Re-record 2 = Address 3 = Erase 4 = Urgent Page Directory Dialing...
Page 466 Issue 10.1 UNIVERGE SV8100 Function Number List [2] Appearance Function Level ( 00 - 99) (Service Code 852 (OT) / 752 (AU))   Function Function Additional Data LED Indication Number Trunk Number (001~200)  Trunk Key Park Number (01~64) Park Key ...
Page 467: 30-04: Dss Console Alternate Answer
UNIVERGE SV8100 Issue 10.1 Program 30 : DSS/DLS Console Setup 30-04: DSS Console Alternate Answer Level: Description Use Program 30-04: DSS Console Alternate Answer to assign the alternate DSS console station in case off-duty mode is set (by pressing the ALT key on the DSS console).
Page 468: 30-05: Dss Console Lamp Table
Issue 10.1 UNIVERGE SV8100 Program 30 : DSS/DLS Console Setup 30-05: DSS Console Lamp Table Level: Description Use Program 30-05: DSS Console Lamp Table to define the LED patterns for functions on the DSS consoles. Input Data Item Lamp Pattern...
Page 469: Table 2-9 Led Patterns For Dss Console
UNIVERGE SV8100 Issue 10.1 Table 2-9 LED Patterns for DSS Console Conditions None Feature Cross Reference Direct Station Selection (DSS) Console  Programming Manual 2 - 433...
Page 470: 30-10: Dss Console Ip Terminal Setup
Issue 10.1 UNIVERGE SV8100 Program 30 : DSS/DLS Console Setup 30-10: DSS Console IP Terminal Setup Level: Description Use Program 30-10: DSS Console IP Terminal Setup to set the MAC address for a particular IP DSS Console. This must be done before the console can be associated to the attendant phone.
Page 471: Program 31 : Paging Setup
Program 31 : Paging Setup 31-01 : System Options for Internal/External Paging Level: Description Use Program 31-01 : System Options for Internal/External Paging to define the system options for Internal/External Paging. Program The system shows the name you program on the telephone display. Use the following chart when entering and editing text.
Page 472 Issue 10.1 UNIVERGE SV8100 Key for Entering Names (Continued) When entering names in the procedures below, refer to this chart. Names can have up to 12 digits. Use this keypad When you want to. . . digit . . .
Page 473: Internal Paging Group Assignment
UNIVERGE SV8100 Issue 10.1 Program 31 : Paging Setup 31-02 : Internal Paging Group Assignment Level: Description Use Program 31-02 : Internal Paging Group Assignment to assign extensions to Internal Paging Groups (i.e., Page Zones). The setting in this program also determines if the Internal Page Group can receive Internal All Call Paging.
Page 474: Internal Paging Group Settings
Issue 10.1 UNIVERGE SV8100 Program 31 : Paging Setup 31-03 : Internal Paging Group Settings Level: Description Use Program 31-03 : Internal Paging Group Settings to assign names to Internal Paging Groups (i.e., Page Zones) and to define the splash tone for Internal Paging.
Page 475 UNIVERGE SV8100 Issue 10.1 Key for Entering Names When entering names in the procedures below, refer to this chart. Names can have up to 12 digits. Use this keypad When you want to. . . digit . . . # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM).
Page 476 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Paging, Internal  2 - 440 Program 31 : Paging Setup...
Page 477: External Paging Zone Group
External Paging group. Users call the External Paging group when broadcasting announcements to the external zone. When programming, the zones on the PGD Adapter are numbers 1~8. On the UNIVERGE SV8100 system, the CD-CP00 zone is number 9.
Page 478: Universal Night Answer/Ring Over Page
Issue 10.1 UNIVERGE SV8100 Program 31 : Paging Setup 31-05 : Universal Night Answer/Ring Over Page Level: Description Use Program 31-05 : Universal Night Answer/Ring Over Page to assign Universal Night Answer ringing to each External Paging zone. For each trunk port, make a separate entry for each External Paging zone.
Page 479: External Speaker Control
UNIVERGE SV8100 Issue 10.1 Program 31 : Paging Setup 31-06 : External Speaker Control Level: Description Use Program 31-06 : External Speaker Control to define the settings for the external speaker using an amplifier. Input Data External Speaker Number 1~9 (9 = CD-CP00)
Page 480 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Paging, External  2 - 444 Program 31 : Paging Setup...
Page 481: Combined Paging Assignments
UNIVERGE SV8100 Issue 10.1 Program 31 : Paging Setup 31-07 : Combined Paging Assignments Level: Description Use Program 31-07 : Combined Paging Assignments to assign an External Paging Group (0~8) to an Internal Paging Zone (0~64) for Combined Paging. When an extension user makes a Combined Page, they simultaneously broadcast into both the External and Internal Zone.
Page 482: Bgm On External Paging
Issue 10.1 UNIVERGE SV8100 Program 31 : Paging Setup 31-08 : BGM on External Paging Level: Description Use Program 31-08 : BGM on External Paging to set the Background Music option for each External Paging zone. If enabled, the system plays Background Music over the zone when it is idle.
Page 483: Program 32 : Door Box And Sensor Setup
Program 32 : Door Box and Sensor Setup 32-01: Door Box Timers Setup Level: Description Use Program 32-01: Door Box Timers Setup to assign the timers used for the Door Box. Program  The Door Box feature is called Door Phone when programming via WebPro and using a multiline terminal.
Page 484: 32-02: Door Box Ring Assignment
Issue 10.1 UNIVERGE SV8100 Program 32 : Door Box and Sensor Setup 32-02: Door Box Ring Assignment Level: Description Use Program 32-02: Door Box Ring Assignment to assign the extension which rings when a caller presses the associated Door Box call button.
Page 485: 32-03: Door Box Basic Setup
UNIVERGE SV8100 Issue 10.1 Program 32 : Door Box and Sensor Setup 32-03: Door Box Basic Setup Level: Description Use Program 32-03: Door Box Basic Setup to select the chime pattern and gain level for each Door Box. There are six distinctive chime patterns. The chime tones are...
Page 486: 32-04: Door Box Name Setup
Issue 10.1 UNIVERGE SV8100 Program 32 : Door Box and Sensor Setup 32-04: Door Box Name Setup Level: Description Use Program 32-04: Door Box Name Setup to define the name of each Door Box.  The Door Box feature is called Door Phone when programming via WebPro and using a multiline terminal.
Page 487: Program 33 : Cta And Aci Setup
Program 33 : CTA and ACI Setup 33-01: ACI Port Type Setup Level: Description Use Program 33-01: ACI Port Type Setup to set the function of each software port on an Analog Communications Interface. Each ACI software port Program can have only one function (input, output or none). Input Data ACI Port Number 01~96...
Page 488: 33-02: Aci Department Calling Group
Issue 10.1 UNIVERGE SV8100 Program 33 : CTA and ACI Setup 33-02: ACI Department Calling Group Level: Description Use Program 33-02: ACI Department Calling Group to assign ACI ports to Department Groups. An ACI port can be in only one group.
Page 489: Program 34 : Tie Line Setup
Program 34 : Tie Line Setup 34-01: E&M Tie Line Basic Setup Level: Description Use Program 34-01: E&M Tie Line Basic Setup to define the basic settings for each E&M Tie line. Program Input Data Trunk Port Number 001~200 Item Related Item Input Data...
Page 490 Issue 10.1 UNIVERGE SV8100 = System 21-05 Determine if an System Toll Restriction incoming Tie Line call = Each should be subject to Extension Toll Restriction. If it s set to 0 then it will use the PRG21-05-13, if it...
Page 491: 34-02: E&M Tie Line Class Of Service
UNIVERGE SV8100 Issue 10.1 Program 34 : Tie Line Setup 34-02: E&M Tie Line Class of Service Level: Description Use Program 34-02: E&M Tie Line Class of Service to assign a Class of Service to a Tie line (there are 15 Tie line Classes of Service). The Class of Service options are defined in Program 20-14.
Page 492: 34-03: Trunk Group Routing For E&M Tie Lines
Issue 10.1 UNIVERGE SV8100 Program 34 : Tie Line Setup 34-03: Trunk Group Routing for E&M Tie Lines Level: Description Use Program 34-03: Trunk Group Routing for E&M Tie Lines to assign the trunk group route 1~8 or 1~100) chosen when a user seizes a Tie Line and dials 9. (Set Trunk Group Routing in Program 14-07.) If the system has Automatic Route...
Page 493: 34-04: E&M Tie Line Toll Restriction Class
UNIVERGE SV8100 Issue 10.1 Program 34 : Tie Line Setup 34-04: E&M Tie Line Toll Restriction Class Level: Description Use Program 34-04: E&M Tie Line Toll Restriction Class to enter a Toll Restriction Class for each Tie Line. There are 15 Toll Restriction Classes which are defined in Programs 21-05 and 21-06.
Page 494: 34-05: Tie Line Outgoing Call Restriction
Issue 10.1 UNIVERGE SV8100 Program 34 : Tie Line Setup 34-05: Tie Line Outgoing Call Restriction Level: Description Use Program 34-05: Tie Line Outgoing Call Restriction to build a restriction matrix for outgoing trunk calls placed from an inbound trunk (e.g., dialed from a Tie Line).
Page 495: 34-06: Add/Delete Digit For E&M Tie Line
UNIVERGE SV8100 Issue 10.1 Program 34 : Tie Line Setup 34-06: Add/Delete Digit for E&M Tie Line Level: Description Use Program 34-06: Add/Delete Digit for E&M Tie Line to set digits that the system should add or delete for Tie Lines.
Page 496: 34-07: E&M Tie Line Timer
Issue 10.1 UNIVERGE SV8100 Program 34 : Tie Line Setup 34-07: E&M Tie Line Timer Level: Description Use Program 34-07: E&M Tie Line Timer to define the system service tone timers. Input Data Item No. Item Input Data Default 0~64800 First Digit Pause (E&M Immediate Start)
Page 497: 34-08: Toll Restriction Data For E&M Tie Lines
UNIVERGE SV8100 Issue 10.1 Program 34 : Tie Line Setup 34-08: Toll Restriction Data for E&M Tie Lines Level: Description Use Program 34-08: Toll Restriction Data for E&M Tie Lines to define the toll restriction data for E&M Tie Lines. This data should be defined if Tie Line Toll Restriction is enabled in Program 21-05-13.
Page 498: 34-09: Ani/Dnis Service Options
Issue 10.1 UNIVERGE SV8100 Program 34 : Tie Line Setup 34-09: ANI/DNIS Service Options Level: Description Use Program 34-09: ANI/DNIS Service Options to define the ANI//DNIS service option setup for E&M Class of Service. Input Data Class of Service 01~15...
Page 499 UNIVERGE SV8100 Issue 10.1 Default Default Item Related Name Input Data Program COS 1 2~15 = SPD Table 13-04 Route Table Setup of Target Dial 22-11-03 (Program 13-03) The option sets how the system uses 34-09-05 = DID Table the route data (gathered in Item 3) to (Program 22-11) route incoming ANI/DNIS calls.
Page 500 Issue 10.1 UNIVERGE SV8100 Default Default Item Related Name Input Data Program COS 1 2~15 0 = Play Busy Tone to 25-03 Routing on ANI/DNIS Error Caller This option lets you determine how 1 = Route Caller to Ring the system handles an ANI/DNIS call...
Page 501: 34-11: E1 Trunk Basic Setup (Ot)
8 = Brazil Code for collect call blocking Trunk 0 = MFC Dialing not used MFC Dialing Type 1 = NEC Standard Use this option to specify the MFC 2 = Argentina Dialing Type. The following table shows the available MFC Dialing...
Page 502 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default 0~20 Expected Number of MFC Digits Use this option to specify the number of digits in the ANI number. This is required for ANI since delimiters do not mark the beginning and end of the data string.
Page 503: Program 35 : Smdr Account Code Setup
Program 35 : SMDR Account Code Setup 35-01: SMDR Options Level: Description Use Program 35-01: SMDR Options to set the SMDR (Station Message Detail Recording) options for each of the eight SMDR ports. Refer to the Program following chart for a description of each option, its range and default setting. Input Data SMDR Port Number Item...
Page 504 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0~65535 (sec) (0 = All) Minimum Call Duration The duration of the call must be at least this time to be included on the SMDR report. 0~65535 (sec) (0 = All)
Page 505: 35-02: Smdr Output Options
UNIVERGE SV8100 Issue 10.1 Program 35 : SMDR Account Code Setup 35-02: SMDR Output Options Level: Description Use Program 35-02: SMDR Output Options to set the SMDR (Station Message Detail Recording) output options for each of the eight SMDR ports. Refer to the following chart for a description of each option, its range and default setting.
Page 506 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default = Not Displayed Toll Charge Cost = Displayed Set this option to (1) have the SMDR report include toll charges. = Not Displayed Incoming Call = Displayed Enable this option (1) to have the SMDR report include incoming calls.
Page 507 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = First 20 Digits Dialed Number Output Format (OT) = Last 20 Digits Determine if the dialed number should display the first 20 digits or the last 20 digits. This option is only available for outgoing calls.
Page 508: 35-03: Smdr Port Assignment For Trunk Group
Issue 10.1 UNIVERGE SV8100 Program 35 : SMDR Account Code Setup 35-03: SMDR Port Assignment for Trunk Group Level: Description Use Program 35-03: SMDR Port Assignment for Trunk Group to assign the SMDR port for each trunk group. For each Trunk Group, select the SMDR port where the incoming SMDR information should be sent.
Page 509: 35-04: Smdr Port Assignment For Department Groups
UNIVERGE SV8100 Issue 10.1 Program 35 : SMDR Account Code Setup 35-04: SMDR Port Assignment for Department Groups Level: Description Use Program 35-04: SMDR Port Assignment for Department Groups to assign the SMDR port for each Department Group. For each Department Group, select the SMDR port where the outgoing SMDR information should be sent.
Page 510: 35-05: Account Code Setup
Issue 10.1 UNIVERGE SV8100 Program 35 : SMDR Account Code Setup 35-05: Account Code Setup Level: Description to set various Account Code options for an Program 35-05: Account Code Setup extension Class of Service. Assign a Class of Service to extensions in Program 20-06.
Page 511 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Account Codes  Programming Manual 2 - 475...
Page 512: 35-06: Verified Account Code Table
Issue 10.1 UNIVERGE SV8100 Program 35 : SMDR Account Code Setup 35-06: Verified Account Code Table Level: Description to enter Account Codes into the Program 35-06: Verified Account Code Table Verified Account Code list. You can enter up to 2000 codes with 3~6 digits, using the characters 0~9 or .
Page 513: Program 40 : Voice Recording System 40-07: Voice Prompt Language Assignment For Vrs
UNIVERGE SV8100 Issue 10.1 Program 40 : Voice Recording System 40-07: Voice Prompt Language Assignment for VRS Level: Level: IN (OT) MF (AU) Description to specify the Program 40-07: Voice Prompt Language Assignment for VRS language to be used for the VRS prompts.
Page 514 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Voice Mail Integration (Analog)  2 - 478 Program 40 : Voice Recording System...
Page 515: 40-10: Voice Announcement Service Option
UNIVERGE SV8100 Issue 10.1 Program 40 : Voice Recording System 40-10: Voice Announcement Service Option Level: Description define the system options for Program 40-10: Voice Announcement Service Option the Voice Announcement feature. Input Data Item Related Item Input Data Default...
Page 516 Issue 10.1 UNIVERGE SV8100 Input Data Item Related Item Input Data Default 0~101 14-01-27 Set VRS Message for Private Call Refuse (0 = No message) (101 = Fixed message) (VRS Msg Private Call) This item assigns the VRS Message number to be used as Private Call Refuse.
Page 517: 40-11: Preamble Message Assignment
UNIVERGE SV8100 Issue 10.1 Program 40 : Voice Recording System 40-11: Preamble Message Assignment Level: Description to assign the VRS message number Program 40-11: Preamble Message Assignment to be used as the Preamble Message for each trunk. When the extension user answers the incoming call, the assigned VRS message is sent to the outside caller.
Page 518 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 482 Program 40 : Voice Recording System...
Page 519: Program 41 : Acd Setup
Program 41 : ACD Setup 41-01: System Options for ACD Level: Description In Program 41-01: System Options for ACD define the system options for the ACD feature. Program Input Data Item Item Input Data Default Up to eight digits (0~9, No Setting ...
Page 520: 41-02: Acd Group And Agent Assignments
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-02: ACD Group and Agent Assignments Level: Description In Program 41-02: ACD Group and Agent Assignments, for each ACD extension number, assign an ACD Group (1~64). An ACD Group number is assigned to each Work Period number (1~8).
Page 521: 41-03: Incoming Ring Group Assignment For Acd Group
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-03: Incoming Ring Group Assignment for ACD Group Level: Description In Program 41-03: Incoming Ring Group Assignment for ACD Group, for each incoming trunk group set up in Program 22-05, designate which ACD Group (1~64) the trunks should ring for each of the eight Work Periods.
Page 522: 41-04: Acd Group Supervisor
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-04: ACD Group Supervisor Level: Description For each ACD Group (1~64), use to assign the Program 41-04: ACD Group Supervisor group supervisor extension and operating mode. Operating modes are: 0 = Supervisor extension does not receive ACD Group calls.
Page 523: 41-05: Acd Agent Work Schedules
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-05: ACD Agent Work Schedules Level: Description to set up the Work Schedules for Program 41-05: ACD Agent Work Schedules ACD Agents and Groups. For each ACD Work Schedule (1~4), designate the start and stop times for each of the eight Work Periods.
Page 524: 41-06: Trunk Work Schedules
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-06: Trunk Work Schedules Level: Description to set up the Work Schedules for trunks. Program 41-06: Trunk Work Schedules For each Work Schedule (1~4), designate the start and stop times for each of the eight Work Periods.
Page 525: 41-07: Acd Weekly Schedule Setup
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-07: ACD Weekly Schedule Setup Level: Description to assign the four Work Schedules Program 41-07: ACD Weekly Schedule Setup (1~4) to days of the week. The assignments you make in this program apply to both the ACD Agent Work Schedules (Program 41-05) and the Trunk Work Schedules (Program 41-06).
Page 526: 41-08: Acd Overflow Options
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-08: ACD Overflow Options Level: Description For each ACD Group (1~64), use to assign the Program 41-08: ACD Overflow Options overflow mode (0~9), destination and announcement message types. Delay Announcement functions are not available for ACD pilot number calls. Each ACD Group can have unique overflow options.
Page 527 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 0~1999 (Used when 41-08-02 is set to 67) 1999 System Speed Dial 1~100 (Used when 41-08-02 is set to 68) Incoming Ring Group when Overflow --- Not Used --- Conditions None...
Page 528: 41-09: Acd Overflow Table Setting
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-09: ACD Overflow Table Setting Level: Description Use Program 41-09: ACD Overflow Table Setting to define the ACD group to which a call is transferred when overflow occurs. Input Data ACD Group No.
Page 529: 41-10: Aci Delay Announcement
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-10: ACI Delay Announcement Level: Description to define the ACI port number to be Program 41-10: ACI Delay Announcement used for the delay announcement. This program is activated when the delay announcement source and options are assigned as ACI in Program 41-08-03.
Page 530: 41-11: Vrs Delay Announcement
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-11: VRS Delay Announcement Level: Description to assign the VRS message number to Program 41-11: VRS Delay Announcement be used as the message source for the 1st and 2nd Delay Announcement Messages.
Page 531 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 0 = Disable Queue Depth Announcement 1 = After 1st (1st) Input when the Queue Depth Announcement is played. 2 = After 2nd (2nd) 3 = After 1st and 2nd (1st and 2nd)
Page 532: 41-12: Night Announcement Setup
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-12: Night Announcement Setup Level: Description Use Program 41-12: Night Announcement Setup to define the night announce voice resource and sending time for each ACD group. Night announcement availability depends on the setting in Program 41-03-02. The night announcement function is not available for ACD pilot number calls.
Page 533: 41-13: Vrs Message Number For Night Announcement
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-13: VRS Message Number for Night Announcement Level: Description Use Program 41-13: VRS Message Number for Night Announcement to define the VRS message number to use as the night announcement. This program is activated when the night announcement source is assigned as VRS in Program 41-12-01.
Page 534: 41-14: Acd Options Setup
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-14: ACD Options Setup Level: Description Use Program 41-14: ACD Options Setup to set various options for ACD Groups. When you set an option for an ACD Group, the setting is in force (if applicable) for all agents in the group.
Page 535 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = No change to Off Duty mode Automatic Off Duty for SLT = Change to Off Duty mode Enable/disable Automatic Off Duty automatically (Skip) (rest) mode for agents with SLT. = Cannot receive internal call...
Page 536 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Automatic Call Distribution (ACD)  2 - 500 Program 41 : ACD Setup...
Page 537: 41-15: Acd Queue Alarm Information
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-15: ACD Queue Alarm Information Level: Description Use Program 41-15: ACD Queue Alarm Information to assign the options for Audible Indication for Log Out/Off Duty mode for each ACD group. These program settings provide an alarm to the agents, but no Queue Status Display is indicated.
Page 538 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Automatic Call Distribution (ACD)  2 - 502 Program 41 : ACD Setup...
Page 539: 41-16: Acd Threshold Overflow
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-16: ACD Threshold Overflow Level: Description Use Program 41-16: ACD Threshold Overflow to define the value of the ACD threshold call overflow and the mode for each ACD group. Input Data ACD Group No.
Page 540: 41-17: Acd Login Mode Setup
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-17: ACD Login Mode Setup Level: Description to define the ACD login mode for each Program 41-17: ACD Login Mode Setup extension. If the AIC Login Mode is enabled, set the AIC Login and AIC Logout service codes for the AIC members in Program 11-13-08 and 11-13-09.
Page 541: 41-18: Acd Agent Identity Code Setup
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-18: ACD Agent Identity Code Setup Level: Description to define the ACD Agent Identity Program 41-18: ACD Agent Identity Code Setup Code Table. Input Data AIC Table No. 001~512 Item No.
Page 542 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 506 Program 41 : ACD Setup...
Page 543: 41-19: Acd Voice Mail Delay Announcement
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-19: ACD Voice Mail Delay Announcement Level: Description Use Program 41-19: ACD Voice Mail Delay Announcement to assign IPK II In-Mail Master Mailboxes (PRG 47-03) as ACD Delay “Announcement” Mailboxes. Input Data...
Page 544 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 ~ 64800 (sec) Delay Message Interval Time Sets the timer for the interval between the Delay Messages. Conditions None Feature Cross Reference None 2 - 508 Program 41 : ACD Setup...
Page 545: 41-20: Acd Queue Display Settings
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-20: ACD Queue Display Settings Level: Description to assign the options for the ACD Program 41-20: ACD Queue Display Settings Queue Status Display feature. This program allows the Queue Status Display, and causes an alarm to sound, when the parameters in this program are met.
Page 546 Issue 10.1 UNIVERGE SV8100 Input Data ACD Group No. 01~64 Item Item Input Data Default = No Display, Number of Calls in Queue 0~200 Set the number of calls that can accumulate in the ACD queue before the Queue Status Display (and optional queue alarm) occurs.
Page 547: 41-21: Acd Login Id Setup
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-21: ACD Login ID Setup Level: Description to assign the Login ID code to Skill Table Program 41-21: ACD Login ID Setup used for ACD Skill Based Routing. Input Data Login ID table No.
Page 548: 41-22: Acd Skill Based Routing Setup
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-22: ACD Skill Based Routing Setup Level: Description Use Program 41-22: ACD Skill Based Routing Setup to assign if the ACD Group can use or not use Skill Based Routing. Input Data ACD Group No.
Page 549: 41-23: Acd Skill Table Setup
UNIVERGE SV8100 Issue 10.1 Program 41 : ACD Setup 41-23: ACD Skill Table Setup Level: Description to assign the Skill level per table for each Program 41-23: ACD Skill Table Setup ACD Group. Input Data Skill Table No.. 01~512 ACD Group No.
Page 550: Acd Caller Id Base Routing Setup
Issue 10.1 UNIVERGE SV8100 Program 41 : ACD Setup 41-24 : ACD Caller ID Base Routing Setup Level: Description to assign Enable/Disable the Program 41-24 : ACD Caller ID Base Routing Setup availability of setting that the ACD Agent can mark the originator caller ID, system base.
Page 551: Program 42 : Hotel Setup
Program 42 : Hotel Setup 42-01 : System Options for Hotel/Motel Level: Description Use Program 42-01 : System Options for Hotel/Motel to assign the system options for Hotel/Motel Service. Program Input Data Item Item Input Data Default = MOH (Hold Time) Answering Message Mode for Wake Up Call (Hotel Mode) = VRS Message...
Page 552 Issue 10.1 UNIVERGE SV8100 Refer to the tables below for valid status code changes when Program 42-01-06 is enabled or disabled. Valid Room Status Changes when Program 42-01-06 is set to 1 (Enabled) Change Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Code 9 Code 0 Code ...
Page 553 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Hotel/Motel  Programming Manual 2 - 517...
Page 554: Hotel/Motel Telephone Setup
Issue 10.1 UNIVERGE SV8100 Program 42 : Hotel Setup 42-02 : Hotel/Motel Telephone Setup Level: Description Use Program 42-02 : Hotel/Motel Telephone Setup to define the basic operation of the Hotel/Motel extensions. Input Data Extension Number Up to eight digits...
Page 555 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Hotel/Motel  Programming Manual 2 - 519...
Page 556: Class Of Service Options (Hotel/Motel)
Issue 10.1 UNIVERGE SV8100 Program 42 : Hotel Setup 42-03 : Class of Service Options (Hotel/Motel) Level: Description Use Program 42-03 : Class of Service Options (Hotel/Motel) to set the Hotel/Motel Class of Service (COS) options. Assign Class of Service to extensions in Program 42-02 : Hotel/Motel Telephone Setup.
Page 557 UNIVERGE SV8100 Issue 10.1 Default Item Input Item Data Class Class 01 02~15 0 = Off Wake Up Call Setting for Own Extension 1 = On 0 = Off Change Room Status for Own Extension 1 = On 0 = Off...
Page 558: Hotel Mode One-Digit Service Codes
Issue 10.1 UNIVERGE SV8100 Program 42 : Hotel Setup 42-04 : Hotel Mode One-Digit Service Codes Level: Description Use Program 42-04: Hotel Mode One-Digit Service Codes to set up the Hotel Mode one-digit service codes which are assigned in 42-02-01. For each Department Calling Group (1~64), you enter the destination for each single digit code (1~9, 0, ...
Page 559: Hotel Room Status Printer
UNIVERGE SV8100 Issue 10.1 Program 42 : Hotel Setup 42-05 : Hotel Room Status Printer Level: Description Use Program 42-05: Hotel Room Status Printer to set the CTA port to output the Hotel Data (Check-Out sheet, Room Status, etc.) and the output options for the Hotel/ Motel feature.
Page 560: Pms Service Setting
Issue 10.1 UNIVERGE SV8100 Program 42 : Hotel Setup 42-06 : PMS Service Setting Level: Description Use Program 42-06: PMS Service Setting to set the PMS integration settings when using PMS-U13 and PMS feature. Input Data Item Item Input Data...
Page 561 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Hotel/Motel  Programming Manual 2 - 525...
Page 562: Pms Restriction Level Conversion Table
Issue 10.1 UNIVERGE SV8100 Program 42 : Hotel Setup 42-07 : PMS Restriction Level Conversion Table Level: Description Use Program 42-07 : PMS Restriction Level Conversion Table to change the default Toll Restriction class on check in for a room (PRG 42-02-02).
Page 563: 42-08: Text Message Setup For Hotel Room Status
UNIVERGE SV8100 Issue 10.1 Program 42 : Hotel Setup 42-08: Text Message Setup for Hotel Room Status Level: Description Use Program 42-08: Text Message Setup for Hotel Room Status to define the text message for Hotel Room Status. Input Data...
Page 564 Issue 10.1 UNIVERGE SV8100 Default Value alphanumeric Fidelio Room Status Code 12345678901234567890123456789012 Check In Check Out Check In Check Out Check In Check Out Check In Check Out Check In Check Out Check In Check Out Check In Check Out...
Page 565: Flexible Setup For Room Status
UNIVERGE SV8100 Issue 10.1 Program 42 : Hotel Setup 42-09 : Flexible Setup for Room Status Level: Description (This program is aviable for V7000 or higher) Use Program 42-07 : Flexible Setup for Room Status to enable dial room status codes.
Page 566 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Hotel/Motel  2 - 530 Program 42 : Hotel Setup...
Page 567: Program 44 : Ars/F-Route Setup
Program 44 : ARS/F-Route Setup 44-01: System Options for ARS/F-Route Level: Description to define the system Program 44-01: System Options for ARS/F-Route options for the ARS/F-Route feature. Program Input Data Item Item Input Data Default 0 = Not Used ARS/F-Route Time Schedule 1 = Used If this option is set to 0, the F-Route table selected is determined only by the digits dialed...
Page 568: 44-02: Dial Analysis Table For Ars/F-Route Access
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-02: Dial Analysis Table for ARS/F-Route Access Level: Description to set the Program 44-02: Dial Analysis Table for ARS/F-Route Access Pre-Transaction Table for selecting ARS/F-Route. Input Data Dial Analysis Table Number...
Page 569 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = Delete Digit = 0~255 Additional Data (255: Delete All Digits) For the Service Type selected in 44-02-02, enter = 0~500 the additional data required. (0 = No Setting) 1: Delete Digit = 0~255 ...
Page 570: 44-03: Dial Analysis Extension Table
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-03: Dial Analysis Extension Table Level: Description When Program 44-02-02 is set to type 3, use Program 44-03: Dial Analysis Extension Table to set the dial extension analysis table. These tables are used when the analyzed digits must be more than eight digits.
Page 571 UNIVERGE SV8100 Issue 10.1 Dial Analysis Table Number: 251 Item Item Input Data Default 0~500 (ARS/F-Route Table Number) ARS/F-Route Select Table Number With Program 44-01 set to 0, Program 44-05 is checked. With Program 44-01 set to 1, Program 44-04 is checked.
Page 572: 44-04: Ars/F-Route Selection For Time Schedule
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-04: ARS/F-Route Selection for Time Schedule Level: Description to assign each ARS/ Program 44-04: ARS/F-Route Selection for Time Schedule F-Route Selection number to an ARS/F-Route table number for each ARS/F-Route time mode. There are eight time modes for ARS/F-Route Access.
Page 573: 44-05: Ars/F-Route Table
UNIVERGE SV8100 Issue 10.1 Program 44 : ARS/F-Route Setup 44-05: ARS/F-Route Table Level: Description to set the ARS/F-Route table. There are four Program 44-05: ARS/F-Route Table kinds of order. If the higher priority trunk groups are busy, the next order group is used.
Page 574 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0~16 ARS Class of Service Select the ARS Class of Service to use for the table. An extension ARS COS is determined in Program 26-04-01. 0~15 Dial Treatment Select the Dial Treatment to use for the table. If a...
Page 575: 44-06: Additional Dial Table
UNIVERGE SV8100 Issue 10.1 Program 44 : ARS/F-Route Setup 44-06: Additional Dial Table Level: Description to set the additional dial table to add prior to Program 44-06: Additional Dial Table the dialed ARS/F-Route number. The Additional Dial Table used is determined in Program 44-05-03.
Page 576: 44-07: Gain Table For Ars/F-Route Access
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-07: Gain Table for ARS/F-Route Access Level: Description to set the gain/PAD table. If an Program 44-07: Gain Table for ARS/F-Route Access extension dials ARS/F-Route number: The Extension Dial Gain Table, assigned in Program 44-05, is activated.
Page 577 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Automatic Route Selection (ARS)  Programming Manual 2 - 541...
Page 578: 44-08: Time Schedule For Ars/F-Route
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-08: Time Schedule for ARS/F-Route Level: Description to define the daily pattern of the Program 44-08: Time Schedule for ARS/F-Route ARS/F-Route feature. ARS/F-Route has 10 time patterns. These patterns are used in Program 44-09 and 44-10.
Page 579 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Automatic Route Selection (ARS)  Programming Manual 2 - 543...
Page 580: 44-09: Weekly Schedule For Ars/F-Route
Issue 10.1 UNIVERGE SV8100 Program 44 : ARS/F-Route Setup 44-09: Weekly Schedule for ARS/F-Route Level: Description to define a weekly schedule for Program 44-09: Weekly Schedule for ARS/F-Route using ARS/F-Route. The pattern number is defined in Program 44-08-01. Input Data Item No.
Page 581: 44-10: Holiday Schedule For Ars/F-Route
UNIVERGE SV8100 Issue 10.1 Program 44 : ARS/F-Route Setup 44-10: Holiday Schedule for ARS/F-Route Level: Description to define a yearly schedule for Program 44-10: Holiday Schedule for ARS/F-Route ARS/F-Route. This schedule is used for setting special days such as national holidays.
Page 582 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 546 Program 44 : ARS/F-Route Setup...
Page 583: Program 45 : Voice Mail Integration
Program 45 : Voice Mail Integration 45-01 : Voice Mail Integration Options Level: Description to customize certain voice Program 45-01: Voice Mail Integration Options mail integration options. Program Input Data Item Related Item Input Data Default 0~64 Voice Mail Department Group Number 0 = No Voice Mail Assign which Extension (Department)
Page 584 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Related Item Input Data Default 0 = Off 45-01-13 Message Wait 1 = On Enable/disable the system ability to process the Voice Mail Message Wait ) commands. You should normally enable this option. If enabled, be sure that the programmed Message Notification strings don’t contain the...
Page 585 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Related Item Input Data Default 0: No 45-04 Reply Mailbox Number 1: Yes Whether or not to include the mailbox number in the analog voice mail protocol. Trunk Number Mapping Assign the digits of trunk number mapping.
Page 586: 45-02: Nsl Option Setup
Issue 10.1 UNIVERGE SV8100 Program 45 : Voice Mail Integration 45-02: NSL Option Setup Level: Description Program 45-02: NSL Option Setup to setup the NSL options for Voice Mail integration Input Data Item Item Input Data Default 0 = Send DTMF tone to SLT-VM port...
Page 587: 45-04: Voice Mail Digit Add Assignment
UNIVERGE SV8100 Issue 10.1 Program 45 : Voice Mail Integration 45-04: Voice Mail Digit Add Assignment Level: Description Use Program 45-04: Voice Mail Digit Add Assignment to define the digits to add. Input Data Item Related Item Input Data Default...
Page 588: Voice Mail Send Protocol Signal Without Additional Digits
Issue 10.1 UNIVERGE SV8100 Program 45 : Voice Mail Integration Signal Digits 45-05 : Voice Mail Send Protocol Without Additional Level: Description Use Program 45-05: Voice Mail Send Protocol Signal Without Additional Digits to send trunk number and/or station number information if integrating to Voice Mail when PRG 45-04-XX is left blank and 45-01-15 is set to “Program”.
Page 589 UNIVERGE SV8100 Issue 10.1 Feature Cross Reference None Programming Manual 2 - 553...
Page 590 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 554 Program 45 : Voice Mail Integration...
Page 591: Program 47 : Inmail
Use this option to modify the name for all UNIVERGE SV8100 VM8000 InMail ports. The system briefly displays this name when a display multiline terminal user calls a Voice Mail port...
Page 592 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 1~4095 (sec) Subscriber Message Length (Subs Msg Length) Use this option to set the maximum length of recorded messages for: Subscriber Mailbox users  dialing RS to record and send a message.
Page 593 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 1~60 (sec) Message Backup/Go Ahead Time (Msg Bkup/Adv Time) Use this option to set the backup/ go ahead time. This time sets how far VM8000 InMail backs up when a user dials B while listening to a message.
Page 594 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~99 (sec) Delay in Dialing Digital Pager Callback Number (Pager Dial Delay) Use this option to set the delay (0~99 seconds) that occurs just before VM8000 InMail dials the...
Page 595 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 1~255 (min) Wait Between Digital Pager Callout Attempts (Notify Pager Intvl) Use this option to set the minimum time (1~255 minutes) between unacknowledged or unanswered digital pager Message Notification callouts. (A...
Page 596 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 1~255 (min) Wait Between RNA Non-Pager Callout Attempts (Notify RNA Intvl) Use this option to set how long VM8000 InMail waits (1~255 minutes), after it dials an unanswered non-pager callout destination, before retrying the callout number.
Page 597 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 1~99 (attempts) Number of Cascading Attempts (Notify Call Attmpt) With Cascade Pager Notification: Set how many times a mailbox’s enabled pager notification destinations are tried. For example if 47-01-14 is set to 10...
Page 598 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = 1st Last Name Format 1 = Last 1st Specify if names are displayed in First Last format or Last First. 0~497 InMail Port The first port of InMail...
Page 599: 47-02: Vm8000 Inmail Station Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-02: VM8000 InMail Station Mailbox Options Level: Description to set up a station/extension VM8000 InMail 47-02: Station Mailbox Options mailbox. Station mailboxes are automatically assigned as Subscriber Mailboxes. Normally, VM8000 InMail Station Mailbox numbers 1~26 should correspond to extensions 200~225 (OT) / 101-126 (AU).
Page 600 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~99 messages 99 for mailbox 1 Number of Messages To conserve storage 20 for all other Use this option to set the maximum number of space, enter 0 for all mailboxes messages that can be left in the Subscriber Mailbox.
Page 601 (if the mailbox message storage capacity is reached) You have reached the recording limit (if the recorded message is too long) The UNIVERGE SV8100 telephone system software provides an additional Conversation Record beep. This beep repeats according to the setting of...
Page 602 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = No (Disabled) Forced Unscreened Transfer 1 = Yes (Enabled) (Forced UTRF) Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer (UTRF).
Page 603: Table 2-10 47-02-16 Default Table
UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0 = No (Disabled) Enable Paging 1 = Yes (Enabled) 0 = RNA Paging Option 1 = Immediately 0 = Numeric Telephone User Interface Type 1 = Mnemonic 0 = No...
Page 604 Issue 10.1 UNIVERGE SV8100 Table 2-10 47-02-16 Default Table Item Name Input Data 04 = French Canadian 05 = Dutch 06 = Mexican Spanish 07 = Latin American Spanish 47-02-16 Voice Prompt Language 08 = Italian 09 = German 10 = Madrid Spanish...
Page 605: 47-03: Vm8000 Inmail Group Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-03: VM8000 InMail Group Mailbox Options Level: Description to set up the 32 Group Mailboxes VM8000 InMail 47-03: Group Mailbox Options (01~32). A Group Mailbox is used for Department Group overflow and can be a Subscriber or Call Routing.
Page 606: Group Mailbox Subscriber Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-06 : Group Mailbox Subscriber Options Level: Description to set up a Master Mailbox assigned as 47-06: Group Mailbox Subscriber Options a Subscriber Mailbox in 47-03-03: Master Mailbox Type. Input Data Group Mailbox Number...
Page 607 Record beep. This beep repeats according to the setting of Program 45-01-06: Voice Mail Integration Options: Record Alert Tone Interval Time (0~64800 seconds). To disable the UNIVERGE SV8100 telephone system Conversation Record beep, enter 0 for this option. 0 = No (Disabled)
Page 608 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = No (Disabled) Forced Unscreened Transfer 1 = Yes (Enabled) (Forced UTRF) Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer (UTRF).
Page 609 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default Refer to Table 2-11 47- 2 (OT) Voice Prompt Language 3 (AU) 06-14 Default Table. 0 = No Enable Paging 1 = Yes 0 = RNA Paging Option 1 = Immediate...
Page 610 Issue 10.1 UNIVERGE SV8100 Table 2-11 47-06-14 Default Table Item Name Input Data 47-06-14 Voice Prompt Language 01 = US English 02 = UK English 03 = Australian English 04 = French Canadian 05 = Dutch 06 = Mexican Spanish...
Page 611 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 575...
Page 612: 47-07: Vm8000 Inmail Routing Mailbox Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-07: VM8000 InMail Routing Mailbox Options Level: Description to set up the 32 Routing VM8000 InMail 47-07: Routing Mailbox Options Mailboxes. Routing Mailboxes can be either Announcement or Call Routing Mailboxes. Input Data...
Page 613 UNIVERGE SV8100 Issue 10.1 Table 2-12 47-07-03 Default Table Item Name Input Data 47-07-03 Voice Prompt Language 01 = US English 02 = UK English 03 = Australian English 04 = French Canadian 05 = Dutch 06 = Mexican Spanish...
Page 614 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 578 Program 47 : InMail...
Page 615: Call Routing Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-08 : Call Routing Mailbox Options Level: Description to set the options for mailboxes assigned as 47-08 : Call Routing Mailbox Options Call Routing Mailboxes in 47-07-02: Routing Mailbox Type. Input Data...
Page 616 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 = No Fax Detection (Disabled) Use this option to enable or disable Fax Detection for 1 = Yes the Call Routing Mailbox. In enabled, the VM8000 (Enabled) InMail Automated Attendant (when using this Call Routing Mailbox) detects incoming fax CNG tone.
Page 617: Announcement Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-09 : Announcement Mailbox Options Level: Description to set the options for mailboxes assigned 47-09 : Announcement Mailbox Options as Announcement Mailboxes in 47-07-02 : Routing Mailbox Type. Input Data Routing Mailbox Number...
Page 618 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 = None Hang Up After 1 = Goodbye (HangUp) 2 = Silent Use this option along with Next Call Routing Mailbox and Repeat Count above to provide additional routing options to Automated Attendant callers.
Page 619: 47-10: Vm8000 Inmail Trunk Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-10: VM8000 InMail Trunk Options Level: Description to assign VM8000 InMail options for each VM8000 InMail 47-10: Trunk Options trunk. Currently, only 47-10-01: Answer Table Assignment is available. Input Data Trunk Port Number...
Page 620: Table 2-13 47-10-03 Default Table
Issue 10.1 UNIVERGE SV8100 Table 2-13 47-10-03 Default Table Item Name Input Data 47-10-03 Voice Prompt Language 01 = US English 02 = UK English 03 = Australian English 04 = French Canadian 05 = Dutch 06 = Mexican Spanish...
Page 621 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 585...
Page 622: 47-11: Vm8000 Inmail Answer Table Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-11: VM8000 InMail Answer Table Options Level: Description to set options for the Answer Tables. VM8000 InMail 47-11: Answer Table Options VM8000 InMail provides eight Answer Tables (1~8). To set up the schedules for each Answer Table, go to 47-12: VM8000 InMail Answer Table Schedule.
Page 623 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0 (Undefined) Override Mailbox Category 1 (Subscriber (Override MB Ctg) Mailbox – STA) Use this option to specify the category of the 2 (Group Mailbox) mailbox where Automated Attendant calls should route when you enable Answer Schedule Override.
Page 624 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 (Undefined) Answer Table 1 = 3 Default Mailbox Category 1 (Subscriber Answer Table 2~8 (Default MB Ctg) Mailbox - STA) Use this option to specify the category of mailbox 2 (Group Mailbox) used as the Default Mailbox.
Page 625 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 589...
Page 626: 47-12: Vm8000 Inmail Answer Schedules
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-12: VM8000 InMail Answer Schedules Level: Description VM8000 InMail to set up the VM8000 InMail Automated 47-12: Answer Schedules Attendant Answer Schedules. There are eight Answer Tables, with up to 10 Answer Schedules in each Answer Table.
Page 627 UNIVERGE SV8100 Issue 10.1 Input Data (Continued) Item Item Input Data Default 0 = Undefined Answer Table (continued from previous page) 1/Schedule 1 = 1 = Day of the Week 3. Date  A type 3 Answer Schedule runs only on a specific 2 = Range of Days day of the year.
Page 628 Issue 10.1 UNIVERGE SV8100 Input Data (Continued) Item Item Input Data Default 1 = Sunday Answer Table Start Day 1/Schedule 1 = 2 = Monday (Entryxx Start Day) For Range of Days (Type 2) Answer Schedules, use 3 = Tuesday...
Page 629 UNIVERGE SV8100 Issue 10.1 Example Type 1 (Day of the Week) Answer Schedule Options Type 1 (Day of Week) Example In this example, Answer Table 1 routes calls as follows: Schedule 1 uses Routing Mailbox 2 and runs Sunday from 8:30AM to 5:00PM.
Page 630 Issue 10.1 UNIVERGE SV8100 Type 1 (Day of Week) Example Answer Table 1 Answer Schedule 1 Answer Schedule 1 is a Day of Week schedule that runs Sunday from 8:30AM to 5:00PM. 47-12-01: Entry01 Schedule Type = 1 47-12-02: Entry01 MB Ctg = 3...
Page 631 UNIVERGE SV8100 Issue 10.1 Type 2 (Range of Days) Answer Schedule Options Type 2 (Range of Days) Example In this example, Answer Table 1 routes calls as follows:  Schedule 1 uses Routing Mailbox 1 and runs Sunday through Wednesday from ...
Page 632 Issue 10.1 UNIVERGE SV8100 Type 2 (Range of Days) Example Answer Table 1 Answer Schedule 1 Answer Schedule 1 is a Range of Days schedule that starts schedule that runs Sunday through Wednesday from 8:30AM to 5:00PM. 47-12-01: Entry01 Schedule Type = 2...
Page 633 UNIVERGE SV8100 Issue 10.1 Type 3 (Date) Answer Schedule Options Type 3 (Date) Example In this example, Answer Table 1 routes calls as follows: Schedule 1 uses Routing Mailbox 1 and runs every day from 8:30AM to 5:00PM.  Schedule 2 uses Routing Mailbox 9 and runs only on Christmas day from 8:30AM to ...
Page 634 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 598 Program 47 : InMail...
Page 635: 47-13: Vm8000 Inmail Dial Action Tables
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-13: VM8000 InMail Dial Action Tables Level: Description Use 47-13: VM8000 InMail Dial Action Tables to set up the VM8000 InMail Dial Action Tables. The Dial Action Table defines the options than an Automated Attendant caller can dial.
Page 636 Issue 10.1 UNIVERGE SV8100 Dial Action Table Actions TRF Action - Screened Transfer (1) (TRF)  Use this action to allow an Automated Attendant caller to place a Screened Transfer to an extension. After an Automated Attendant caller dials an extension, VM8000 InMail calls (screens) the destination to see if the transfer can go through.
Page 637 UNIVERGE SV8100 Issue 10.1 To have Unscreened Transfer call a specific extension, the corresponding Number option should be that extension number. The caller then dials that single digit to reach the extension. For example, to have callers dial 8 to reach extension 303, for key 8 enter UTRF for the Action and 303 for the corresponding Number.
Page 638 Issue 10.1 UNIVERGE SV8100 LOGON Action – Log Onto Voice Mail (5) (LOGON  Use this key action to allow an Automated Attendant caller to log onto Voice Mail. Depending on programming (see Number Option below), the caller is logged directly into a Subscriber Mailbox or is prompted to enter a Subscriber Mailbox of their own choosing.
Page 639 UNIVERGE SV8100 Issue 10.1 GOTO Action – Go to Mailbox (7) (GOTO)  Use this option to provide Automated Attendant callers with the ability to route to Call Routing and Announcement Mailboxes. For example, a caller can dial a digit for Sales, and then go to the Call Routing or Announcement Mailbox that provides the dialing options and instructions for Sales.
Page 640 Issue 10.1 UNIVERGE SV8100 Input Data Dial Action Table Number 01~32 Dial Action Table Action Additional Data TRF Action - Screened Entry : 0-9, #, and  Digits   (8 digits max.) Transfer (1) Use Dial Action Table digits to route an Automated...
Page 641 UNIVERGE SV8100 Issue 10.1 Defaults Dial Action Table Default Settings Dial Action Table 1 Dial Action Tables 2~16 UND (OT) (Undefined) (Undefined) UTRF to XXX (AU) (Unscreened Transfer to user-dialed extension UTRF to XXX (OT) UND (AU) UTRF to XXX...
Page 642 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 606 Program 47 : InMail...
Page 643: Routing Directory Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-15 : Routing Directory Mailbox Options Level: Description to define the Routing Directory Mailbox 47-15 : Routing Directory Mailbox Options Options. This data is referred if Program 47-07-02 (Routing Master Mailbox Type) was set to Type 4 (Directory).
Page 644: Inmail Language License
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-16 : InMail Language License Level: Description to define the language order InMail uses. 47-16 : InMail Language License Depending on the language license number, InMail uses the languages defined starting from Language 1. For example, if the system has a two language license InMail uses the language defined as Language 1 and 2 in the provided default table.
Page 645: Table 2-11 47-06-14 Default Table
UNIVERGE SV8100 Issue 10.1 Item No. Item Input Data Default 21 = Thai 22 = Mandarin Chinese (Taiwan) 23 = Flemish 24 =Turkish 25 = Arabic 26 = Russian Table 2-14 47-16-01 Default Table Language No. 47-16-01 Default Language 1...
Page 646: Table 2-12 47-07-03 Default Table
Issue 10.1 UNIVERGE SV8100 Table 2-14 47-16-01 Default Table Language No. 47-16-01 Default Language 22 00 (No entry) Language 23 00 (No entry) Conditions None Feature Cross Reference None 2 - 610 Program 47 : InMail...
Page 647: Routing Distribution Mailbox Options
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-17 : Routing Distribution Mailbox Options Level: Description Use 47-17 : Routing Distribution Mailbox Options to assign data when Program 47-07-02 is set to 4 (Distribution). Input Data Routing Mailbox Number 1~32...
Page 648: Vm8000 Inmail Smtp Setup
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-18 : VM8000 InMail SMTP Setup Level: Description Use 47-18 VM8000 InMail SMTP Setup to set the SNMP e-mail notification. (Not supported in V1.0) Item No. Item Input Data Default 0 = No...
Page 649: Vm8000 Inmail Pop3 Setup
UNIVERGE SV8100 Issue 10.1 Program 47 : InMail 47-19 : VM8000 InMail POP3 Setup Level: Description Use 47-19: VM8000 InMail POP3 Setup to set the InMail e-mail notification. (Not supported in V1.0) Item No. Item Input Data Default Up to 48 characters...
Page 650: 47-20: Station Mailbox Message Notification
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-20: Station Mailbox Message Notification Level: Description Use 47-20: Station Mailbox Message Notification to set the InMail Station Mailbox Message Notification parameters. Input Data Station Mailbox Number 1~512 Index Number Item Item...
Page 651 UNIVERGE SV8100 Issue 10.1 0 = Disabled Notification Day of Week Tuesday 1 = Enabled 0 = Disabled Notification Day of Week Wednesday 1 = Enabled 0 = Disabled Notification Day of Week Thursday 1 = Enabled 0 = Disabled...
Page 652: 47-21: Station Mailbox Find-Me Follow-Me Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-21: Station Mailbox Find-Me Follow-Me Options Level: Description Use 47-21: Station Mailbox Find-Me Follow-Me Options to set the InMail Station Mailbox Message Find-Me Follow-Me parameters. Input Data Station Mailbox Number 1~512 Index Number...
Page 653 UNIVERGE SV8100 Issue 10.1 0 = Disabled Find-Me Follow-Me Day of Week Saturday 1 = Enabled Conditions None Feature Cross Reference None Programming Manual 2 - 617...
Page 654: 47-22: Group Mailbox Notification Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-22: Group Mailbox Notification Options Level: Description Use 47-22: Group Mailbox Notification Options to set the InMail Group Mailbox Message Notification parameters. Input Data Group Mailbox Number 1~32 Index Number Item Item...
Page 655 UNIVERGE SV8100 Issue 10.1 0 = Disabled Find-Me Follow-Me Day of Week Tuesday 1 = Enabled 0 = Disabled Find-Me Follow-Me Day of Week Wednesday 1 = Enabled 0 = Disabled Find-Me Follow-Me Day of Week Thursday 1 = Enabled...
Page 656: 47-23: Group Mailbox Find-Me Follow-Me Options
Issue 10.1 UNIVERGE SV8100 Program 47 : InMail 47-23: Group Mailbox Find-Me Follow-Me Options Level: Description Use 47-23: Group Mailbox Find-Me Follow-Me Options to set the InMail Group Mailbox Message Find-Me Follow-Me parameters. Input Data Group Mailbox Number 1~32 Index Number...
Page 657 UNIVERGE SV8100 Issue 10.1 0 = Disabled Find-Me Follow-Me Day of Week Saturday 1 = Enabled Conditions None Feature Cross Reference None Programming Manual 2 - 621...
Page 658 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 622 Program 47 : InMail...
Page 659: Program 50 : Common Channel Interoffice Signaling Service
50-01: CCIS System Setting Level: Description Program Use Program 50-01: CCIS System Setting to set the availability of CCIS in the UNIVERGE SV8100. No other CCIS settings function if this program is disabled. Input Data Item No. Item Input Data...
Page 660: 50-02: Connecting System Settings
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-02: Connecting System Settings Level: Description Use Program 50-02: Connecting System Settings to define the settings for each CCIS Route ID. Input Data CCIS Route ID Route ID 1~8: CCIS via DTI...
Page 661 UNIVERGE SV8100 Issue 10.1 Conditions If 56K K-CCIS is used, 24 Multi-Frame (ESF) must be assigned in Program  10-03-02. DPC must be what the OPC is on the opposite side of the link.  Feature Cross Reference None Programming Manual...
Page 662 Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-03: CCIS Destination System Settings Level: Description Use Program 50-03: CCIS Destination System Settings to assign information of remote systems in a CCIS Network. Input Data CCIS System ID...
Page 663: 50-04: Ccis Office Code Assignment
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-04: CCIS Office Code Assignment Level: Description Use Program 50-04: CCIS Office Code Assignment to define the Office Code when the CCIS Network is constructed with an Open Numbering Plan.
Page 664: 50-05: Ccis Maximum Call Forwarding Hop Counter
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-05: CCIS Maximum Call Forwarding Hop Counter Level: Description Use Program 50-05: CCIS Maximum Call Forwarding Hop Counter to define the maximum hop counter of call forwarding. Input Data...
Page 665: 50-06: Ccis Feature Availability
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-06: CCIS Feature Availability Level: Description Use Program 50-06: CCIS Feature Availability to define the availability of CCIS features. Input Data Item Item Input Data Default Description 0 = Not available...
Page 666: 50-07: Ccis Centralized Billing Center Office
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-07: CCIS Centralized Billing Center Office Level: Description Use Program 50-07: CCIS Centralized Billing Center Office to define the Point Code and CCIS Route ID for the Billing Center Office.
Page 667: 50-08: Ccis Centralized Blf Sending Group Assignment
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-08: CCIS Centralized BLF Sending Group Assignment Level: Description Use Program 50-08: CCIS Centralized BLF Sending Group Assignment to define the destination of BLF for the sending system. Eight sending systems can be registered in this program.
Page 668: 50-09: Ccis Centralized Blf Sending Extension Number Assignment
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-09: CCIS Centralized BLF Sending Extension Number Assignment Level: Description Use Program 50-09: CCIS Centralized BLF Sending Extension Number Assignment to define the extension number for sending BLF messages. One...
Page 669 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default Description 0 = Disable Enable (0) or Disable (1) the Send to Sending Group 6 ability to send the BLF to 1 = Enable Send Group 6 assigned in PRG 50-08-XX.
Page 670: 50-10: Ccis Centralized Blf Interval Time Assignment
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-10: CCIS Centralized BLF Interval Time Assignment Level: Description Use Program 50-10: CCIS Centralized BLF Interval Time Assignment to define the time to send BLF messages. Input Data Item No.
Page 671: 50-11: Ccis Centralized Day/Night Switching Sending Group Assignment
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-11: CCIS Centralized Day/Night Switching Sending Group Assignment Level: Description Use Program 50-11: CCIS Centralized Day/Night Switching Sending Group Assignment to define Point Code and CCIS Route ID for sending Day/Night Switching message.
Page 672 Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-12: CCIS Centralized Day/Night Mode to System Mode Assignment Level: Description Use Program 50-12: CCIS Centralized Day/Night Mode to System Mode Assignment to define corresponding night mode to switch to when Day/Night mode switching message arrives.
Page 673: 50-13: Ccis Centralized Response Time-Out Assignment
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-13: CCIS Centralized Response Time-out Assignment Level: Description Use Program 50-13: CCIS Centralized Response Time-out Assignment to define the response time-out value. Input Data Item No. Item Input Data...
Page 674: 50-14: Ccis Intercom Digits For Caller Id Call Return
Issue 10.1 UNIVERGE SV8100 Program 50 : Common Channel Interoffice Signaling Service 50-14: CCIS Intercom Digits for Caller ID Call Return Level: Description Use Program 50-14: CCIS Intercom Digits for Caller ID Call Return to eliminate the 9 on Caller ID redial except for 7- and 8-digit extensions.
Page 675: 50-15: Ccis Over Ip Basic Information Setting
UNIVERGE SV8100 Issue 10.1 Program 50 : Common Channel Interoffice Signaling Service 50-15: CCIS over IP Basic Information Setting Level: Description Use Program 50-15: CCIS over IP Basic Information Setting to set the basic parameters for CCIS over IP. Input Data Item No.
Page 676 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 640 Program 50 : Common Channel Interoffice Signaling Service...
Page 677: Program 51 : Netlink Service
Program 51 : NetLink Service 51-01 : NetLink System Property Setting Level: Description Use Program 51-01 : NetLink System Property Setting to define the parameters of the NetLink feature. Program  Each system must be set with its own information. ...
Page 678 Issue 10.1 UNIVERGE SV8100 Input Data 0 = Immediate Signal Transmit Method (Version 1 = Buffering 8.00 or 0 = Immediate lower) This is the default setting which does not use Nagle Algorithm. When this is enabled data packets are immediately...
Page 679: Netlink System Individual Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-02 : NetLink System Individual Setting Level: Description Use Program 51-02: NetLink System Individual Setting to set system data for each NetLink system. Input Data System ID 1~50 Item Item Input Data Default Up to 20 characters.
Page 680 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 644 Program 51 : NetLink Service...
Page 681: Netlink Internet Protocol Address List Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-03 : NetLink Internet Protocol Address List Setting Level: Description Use Program 51-03 : NetLink Internet Protocol Address List Setting to set the IP address of the NetLink system. Input Data...
Page 682 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference None 2 - 646 Program 51 : NetLink Service...
Page 683: Ip Address Setting Of Top Priority Primary System Of Netlink
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-04 : IP Address Setting of Top Priority Primary System of NetLink Level: Description Use Program 51-04 : IP Address Setting of Top Priority Primary System of NetLink to set the IP address of the new Primary System.
Page 684 Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-05 : NetLink Timer Settings Level: Description Use Program 51-05: NetLink Timer Settings to set the various timers within the NetLink system. Item Item Input Data Default 1~3600 Keep Alive Sending Interval...
Page 685 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 649...
Page 686: Netlink Primary Automatic Integration Setting
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-06 : NetLink Primary Automatic Integration Setting Level: Description Use Program 51-06: NetLink Primary Automatic Integration Settings to set the automatic integration of the Primary system. Input Data Item Item Input Data...
Page 687: Netlink Primary Compulsion Specification Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-07 : NetLink Primary Compulsion Specification Setting Level: Description Use Program 51-07: NetLink Primary Compulsion Specification Setting to set compulsion specification of the Primary system. Input Data Item Item Input Data...
Page 688: Primary Netlink Setting
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-08 : Primary NetLink Setting Level: Description Use Program 51-08 : Primary NetLink Setting to set the IP address and system ID of the compulsory specification of the Primary system. (This program is available only via telephone programming and not through PC Programming).
Page 689: Netlink Communication Port Settings
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-09 : NetLink Communication Port Settings Level: Description Use Program 51-09 : NetLink Communication Port Settings to set the various communication ports used on the system. Input Data Item Item Input Data...
Page 690 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 654 Program 51 : NetLink Service...
Page 691: Virtual Slot Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-10 : Virtual Slot Setting Level: Description Use Program 51-10: Virtual Slot Setting to view the number of Virtual slots that are remaining in a NetLink network. There can be up to 240 virtual slots available in NetLink.
Page 692: 51-11: Netlink System Information
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-11: NetLink System Information Level: Description Use Program 51-11: NetLink System Information to reference information about other systems in the NetLink network. Input Data System ID 1~50 Item Item Input Data Default For reference only.
Page 693: 51-12: Primary System Information
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-12: Primary System Information Level: Description Use Program 51-12: to reference information about the Primary System Information Primary System in the NetLink network. Input Data Item Item Input Data Default For reference only.
Page 694: 51-13: Netlink Options
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-13: NetLink Options Level: Description Use Program 51-13: NetLink Options to enable automatic IP address List Operation updates, time zone information, and MAC address authorization. Input Data Item Item Input Data...
Page 695: 51-14: Netlink System Control
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-14: NetLink System Control Level: Description Use Program 51-14: NetLink System Control to delete system and slot information. (This program is available only via telephone programming and not through PC Programming).
Page 696: 51-15: Demonstration Setting
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-15: Demonstration Setting Level: Description Use Program 51-15: Demonstration Setting to automatically set the minimum setting values in NetLink. A system reset occurs after this command is executed. (This program is available only via telephone programming and not through PC Programming).
Page 697: 51-16: Netlink System Data Replication Mode Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-16: NetLink System Data Replication Mode Setting Level: Description Use Program 51-16: NetLink System Data Replication Mode Setting to set the system data replication between the Primary and Secondary systems. Input Data...
Page 698 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 662 Program 51 : NetLink Service...
Page 699: 51-17:Netlink Dt700 Server Individual Information Setting
UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-17:NetLink DT700 Server Individual Information Setting Level: Description Use Program 51-17: NetLink DT700 Server individual Information Setting to set the information of DT700 Server on each system in NetLink. Input Data...
Page 700: 51-18: Netlink Configuration Options
Issue 10.1 UNIVERGE SV8100 Program 51 : NetLink Service 51-18: NetLink Configuration Options Level: Description Use Program 51-18: NetLink Configuration Options to set the NetLink Fail-Over limits. Input Data System ID 1 -50 Item Item Input Data Default 0, 2~10...
Page 701 UNIVERGE SV8100 Issue 10.1 Program 51 : NetLink Service 51-19: NetLink IP Trunk (SIP) Calling Party Number Setup for Extension Level: Description Use Program 51-19: NetLink IP Trunk (SIP) Calling Party Number Setup for Extension to set CPN transmission for each secondary system.
Page 702 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 666 Program 51 : NetLink Service...
Page 703: Program 80 : Basic Hardware Setup For System
Program 80 : Basic Hardware Setup for System 80-01 : Service Tone Setup Level: Description Use Program 80-01: Service Tone Setup to define up to 64 Service Tones. Each service tone is defined by the combination of 32 Basic Tones. Program Input Data Service Tone Number...
Page 704: Table 2-15 Basic Tones
Issue 10.1 UNIVERGE SV8100 Table 2-15 Basic Tones Basic Level Basic Frequency (Hz) Frequency (Hz) Level (dB) Tone No. (dB) Tone No. - 13 520 / 650 -13 / -19 650 / 780 -13 / -19 780 / 1040 -13 / -19...
Page 705 UNIVERGE SV8100 Issue 10.1 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 42 (+5dB) Internal Busy Tone 42 (+5dB) (Busy Tone) 42 (+5dB) DND Busy Tone 42 (+5dB) 42 (+5dB) B-busy Tone 42 (+5dB)
Page 706 Issue 10.1 UNIVERGE SV8100 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 38 (+3dB) Doorphone chime 3 26 (-3dB) 38 (+3dB) 26 (-3dB) 14 (-9dB) 32 (0dB) 38 (+3dB) Doorphone chime 4 26 (-3dB)
Page 707 UNIVERGE SV8100 Issue 10.1 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 42 (+5dB) External audible ring tone 42 (+5dB) 42 (+5dB) External reorder tone 42 (+5dB) 42 (+5dB) External busy tone 42 (+5dB) 35 (+1.5dB)
Page 708 Issue 10.1 UNIVERGE SV8100 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 32 (0dB) Warning Beep Tone Signaling 32 (0dB) 35 (+1.5dB) Headset Ear Piece Ringing 35 (+1.5dB) Tone 35 (+1.5dB) 35 (+1.5dB)
Page 709 UNIVERGE SV8100 Issue 10.1 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 32 (0dB) Stutter Dial Tone 32 (0dB) (Special Dial Tone) 32 (0dB) 32 (0dB) 32 (0dB) 32 (0dB) 32 (0dB) Internal Recall Dial Tone...
Page 710 Issue 10.1 UNIVERGE SV8100 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 38 (+3dB) Doorphone chime 2 26 (-3dB) 38 (+3dB) 26 (-3dB) 14 (-9dB) 32 (0dB) 38 (+3dB) Doorphone chime 3 26 (-3dB)
Page 711 UNIVERGE SV8100 Issue 10.1 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 32 (0dB) Splash Tone 2 32 (0dB) 32 (0dB) Splash Tone 3 32 (0dB) 32 (0dB) 1 Sec Signal Tone 32 (0dB)
Page 712 Issue 10.1 UNIVERGE SV8100 Service Basic Repeat Unit Gain Level Tone Service tone Name Tone Duration count count (dB) 32 (0dB) Generate tone for TAPI2.1 38 (+3dB) Warning Beep Tone Signaling 32 (0dB) Headset Ear Piece Ringing 38 (+3dB) Tone...
Page 713: Dtmf Tone Setup
UNIVERGE SV8100 Issue 10.1 Program 80 : Basic Hardware Setup for System 80-02 : DTMF Tone Setup Level: Level: MF (OT) IN (AU) Description Use Program 80-02: DTMF Tone Setup to define the duration (On time) and pause (Off time) for DTMF dialing. This option affects all trunk line calls system wide. Make separate entries for duration and pause.
Page 714 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 678 Program 80 : Basic Hardware Setup for System...
Page 715: Dtmf Tone Receiver Setup
UNIVERGE SV8100 Issue 10.1 Program 80 : Basic Hardware Setup for System 80-03 : DTMF Tone Receiver Setup Level: Description Use Program 80-03 : DTMF Tone Receiver Setup to define the various levels and timers for the DTMF Tone Receiver.
Page 716 Issue 10.1 UNIVERGE SV8100 Item No Item Input Data 0~15 Max. Detect Level DTMF Tone 0: 0dBm(0) to -15dBm(15) DTMF Tone 1: -5dBm(0) to -20dBm(15) DTMF Tone 2 : -10dBm(0) to -25dBm(15) DTMF Tone 3 : -15dBm(0) to -30dBm(15) DTMF Tone 4 : -20dBm(0) to -35dBm(15)
Page 717 UNIVERGE SV8100 Issue 10.1 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) ON detect time 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) 1 (30ms) OFF detect time Conditions None Feature Cross Reference None Programming Manual 2 - 681...
Page 718: Call Progress Tone Detector Setup
Issue 10.1 UNIVERGE SV8100 Program 80 : Basic Hardware Setup for System 80-04 : Call Progress Tone Detector Setup Level: Description Use Program 80-04 : Call Progress Tone Detector Setup to define the various levels and timers for the Call Progress Tone Detector.
Page 719 UNIVERGE SV8100 Issue 10.1 Item No Item Input Data 0~4 (0dB ~ -20dB) S/N Ratio 0~255 (30+30~7680ms) No Tone Time (0 = not detect) 1~255 = 60~7680ms. The formula is 30+30N. When set to N=1, it means 30+30*1=60 When set to N=255, it means...
Page 720 Issue 10.1 UNIVERGE SV8100 1 (60ms) 20(630ms) (OT) 80 (2430ms) (OT) 13 (420ms) OFF max. 14(450ms) (AU) 115(3480ms) time (AU) Frequency No 1 Frequency No 2 (OT) Twist Level 0 (-25dBm) (OT) Conditions None Feature Cross Reference None 2 - 684...
Page 721: Date Format For Smdr And System
UNIVERGE SV8100 Issue 10.1 Program 80 : Basic Hardware Setup for System 80-05 : Date Format for SMDR and System Level: Description Use Program 80-05 : Date Format for SMDR and System to define the date format when printing out the SMDR, alarm report, and system information report.
Page 722: 80-06: Reference Impedance Setup
Issue 10.1 UNIVERGE SV8100 Program 80 : Basic Hardware Setup for System 80-06: Reference Impedance Setup Level: Description Use Program 80-06: Reference Impedance Setup to define the change of Reference Impedance (600  or complex) in LCA PKG and COT PKG Input Data Item No.
Page 723: Call Progress Tone Detector Frequency Setup
UNIVERGE SV8100 Issue 10.1 Program 80 : Basic Hardware Setup for System 80-07 : Call Progress Tone Detector Frequency Setup Level: Description Use Program 80-07: Call Progress Tone Detector Frequency Setup to set the frequency of the detection tone set with Program 80-04-12 and Program 80-04-13.
Page 724: 80-08: Mfc Tone Setup (Ot)
Issue 10.1 UNIVERGE SV8100 Program 80 : Basic Hardware Setup for System 80-08: MFC Tone Setup (OT) Level: Description Use Program 80-08: MFC Tone Setup to define the duration (On time) and pause (Off time) for MFC dialing. This option affects all trunk line calls system wide. And also it is possible to adjust the level of tone.
Page 725: Short Ring Setup
UNIVERGE SV8100 Issue 10.1 Program 80 : Basic Hardware Setup for System 80-09 : Short Ring Setup Level: Description Use Program 80-09 : Short Ring Setup to define the short ring tone for SV8100 multiline terminals. Input Data Short Ring Number...
Page 726 Issue 10.1 UNIVERGE SV8100 Table 2-16 Frequency 1/2 Table (Continued) Data Frequency (Hz) 1175 1318 1397 1568 Table 2-17 Ring Cycle Table Data Ring Cycle (ms) 125(On)/Off 125(On)/125(Off)/125(On)/Off 125(On)/125(Off)/125(On)/125(Off)/125(On)/Off 125(On)/125(Off)/125(On)/125(Off)/125(On)/125(Off)/125(On)/Off 250(On)/Off 250(On)/250(Off)/250(On)/Off 250(On)/250(Off)/250(On)/250(Off)/250(On)/Off 250(On)/250(Off)/250(On)/250(Off)/250(On)/250(Off)/250(On)/Off 325(On)/Off 325(On)/325(Off)/325(On)/Off 325(On)/325(Off)/325(On)/325(Off)/325(On)/Off 500(On)/Off 500(On)/500(Off)/500(On)/Off 1000(On)/Off...
Page 727: Table 2-18 Default Table
UNIVERGE SV8100 Issue 10.1 Table 2-18 Default Table Short Ring Short Tone Name Frequency 1 Frequency 2 Ring Cycle Confirmation Tone Error Tone Alarm Tone for long conversation call Not defined Not defined Conditions None Feature Cross Reference None Programming Manual...
Page 728: 80-11: Mfc Tone Receiver Setup (Ot)
Issue 10.1 UNIVERGE SV8100 Program 80 : Basic Hardware Setup for System 80-11: MFC Tone Receiver Setup (OT) Level: Description Use Program 80-11: MFC Tone Receiver Setup to various data for the MFC signal detection. Input Data MFC Tone Receiver Type Number...
Page 729: Table 2-19 Default Table
UNIVERGE SV8100 Issue 10.1 Input Data Item No. Item Input Data 0~15 Max. detect level MFC Tone 0: -0dBm(0) to -15dBm(15) MFC Tone 1: -5dBm(0) to -20dBm(15) MFC Tone 2: -10dBm(0) to -25dBm(15) MFC Tone 3: -15dBm(0) to -30dBm(15) MFC Tone 4: -20dBm(0) to -35dBm(15)
Page 730 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 694 Program 80 : Basic Hardware Setup for System...
Page 731: Program 81 : Basic Hardware Setup For Trunk
Program 81 : Basic Hardware Setup for Trunk 81-01 : COT Initial Data Setup Level: Description Use Program 81-01: COT Initial Data Setup to define the various basic data parameters for the COT Unit. Program Input Data Item Item Input Data Default 0 = u-law 1 (A-law)
Page 732 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 1~255 9 (144ms) Grounding Time (16~4080ms) 1~255 50 (800ms) (OT) Hook Flash 1 Time 6 (96ms) (AU) (16~4080ms) 1~255 156 (2496ms) Hook Flash 2 Time (16~4080ms) 1~255 47 (3008ms)
Page 733 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 1~255 19 (608ms) (OT) DP Inter-digit Time (10pps) 25 (800ms) (AU) (32~8160ms) 1~255 4 (32ms) (OT) Dial Pulse Break Time (20pps) 6 (48ms) (AU) (8~2040ms) 1~255 2 (16ms) (OT)
Page 734: Diopu Initial Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-02 : DIOPU Initial Data Setup Level: Description Use Program 81-02 : DIOPU Initial Data Setup to define the various basic timers for the DID Unit. Input Data...
Page 735 UNIVERGE SV8100 Issue 10.1 Input Data Item Name Input Data Default 5 (10ms) 1~255 Receive DP Break Minimum Time (2~510ms) 1~255 50 (100ms) Receive DP Break Maximum Time (2~510ms) 1~255 6 (192ms) Receive DP Inter-Digit Time (32~8160ms) 0~255 20 (2000ms)
Page 736: 81-03: Odt Initial Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-03: ODT Initial Data Setup Level: Description Use Program 81-03: ODT Initial Data Setup to define the various basic timers for the E&M Tie Line Unit. Input Data...
Page 737 UNIVERGE SV8100 Issue 10.1 Input Data Item Name Input Data Default 1~255 Receive DP Make Maximum Time (100ms) (2~510ms) 1~255 Receive DP Break Minimum Time (10ms) (2~510ms) 1~255 Receive DP Break Maximum Time (100ms) (2~510ms) 1~255 Pause Time after WINK/DELAY Receive...
Page 738: Isdn Bri Layer 1 (T-Point) Initial Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-04 : ISDN BRI Layer 1 (T-Point) Initial Data Setup Level: Description Use Program 81-04: ISDN BRI Layer 1 (T-Point) Initial Data Setup to define the various basic data for layer 1 of ISDN BRI.
Page 739: Isdn Bri & Pri Layer 2 (T-Point) Initial Data Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-05 : ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup Level: Description Use Program 81-05: ISDN BRI & PRI Layer 2 (T-Point) Initial Data Setup to define the various basic data for layer 2 of ISDN BRI and PRI.
Page 740 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 704 Program 81 : Basic Hardware Setup for Trunk...
Page 741: Isdn Bri & Pri Layer 3 (T-Point) Timer Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup Level: Description Use Program 81-06 : ISDN BRI & PRI Layer 3 (T-Point) Timer Setup to define the various basic timers for layer 3 of ISDN BRI/PRI (defined in Program 10-03-04).
Page 742 Issue 10.1 UNIVERGE SV8100 Item Item Description Input Data Default 1~254 (sec) 4 (sec) Specifies the timer value in 1/100ths T308 of a second of the timer to be started when REL is sent. 1-254 (sec) 90 (sec) Specifies the timer value in 1/100ths...
Page 743 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference ISDN Compatibility  Programming Manual 2 - 707...
Page 744: Codec Filter Setup For Analog Trunk Port
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-07 : CODEC Filter Setup for Analog Trunk Port Level: Description Use Program 81-07: CODEC Filter Setup for Analog Trunk Port to define the CODEC (QSLAC) Filter for each analog trunk port.
Page 745: 81-08: T1 Trunk Timer Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-08: T1 Trunk Timer Setup Level: Description Use Program 81-08: T1 Trunk Timer Setup to define the basic timer setting of each T1 Trunk type. Item Name Input Data...
Page 746 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default 1~250 Ringing Signal Detection Time 80ms (E&M) (8ms ~ 2000ms) 1~250 Ringing Signal Detection Time 80ms (OPX) (8ms ~ 2000ms) 1~255 Ringing Signal Stop Detection 5000ms Time (Loop) (100ms ~ 25500ms)
Page 747 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default 1~255 Hook Flash Send Time (OPX) 500ms (100ms ~ 25500ms) 1~255 Pause Send Time (ALL) 3sec (1sec ~ 255sec) 1~250 Wink Send Duration Time (DID) 200ms (8ms ~ 2000ms) 1~250 Delay Send Duration Time (DID)
Page 748 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default 1~255 Receive Hook Flash Duration 300ms Min. Time (E&M) (100ms ~ 25500ms) 1~255 Receive Hook Flash Duration 600ms Max. Time (E&M) (100ms ~ 25500ms) 1~255 Receive Hook Flash Duration 300ms Min. Time (OPX)
Page 749 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default 1~255 Guard Time 1 (Ground) 900ms (100ms ~ 25500ms) 1~250 Guard Time 1 (DID) 12ms (4ms ~ 1000ms) 1~255 Guard Time 1 (E&M) 2000ms (100ms ~ 25500ms) 1~255 Guard Time 1 (OPX)
Page 750: 81-09: Cot Codec (Qslac) Filter Setting
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-09: COT CODEC (QSLAC) Filter Setting Level: Description Use Program 81-09: COT CODEC (QSLAC) Filter Setting to define the filter setting data (when Program 81-07 is set to 4).
Page 751 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 752 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1) 0-255 GR Filter Coefficients(2)
Page 753: 81-10: Cot Initial Data Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-10: COT Initial Data Setup Level: Description Use Program 81-10: COT Initial Data Setup to define the various basic timers for each COT trunk port. These timers are only used with a Migration system and only apply to the Circuit cards installed in the IPKII/IPK chassis.These timers do not apply...
Page 754 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 1~15 Pause Time Selection (3000ms) (500~7500ms) 0 = 20ms 9 (OT) Hookflash Time Selection 1 4 (AU) 1 = 40ms Normal Hook Flash 2 = 60ms 3 = 80ms 4 = 100ms...
Page 755: 81-11: Tie Line Initial Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-11: Tie Line Initial Setup Level: Description Use Program 81-11: Tie Line Initial Setup to define the various initial data for DID/ TLI/DTI packages. Input Data Trunk port Number...
Page 756 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default Wink Start Wink Start Incoming Signal Detect Time Selection 1~15 Specify the time after the incoming signal (390 (130ms~1950ms) from another system is detected before the acknowledge signal is sent out.
Page 757 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 0 = 20ms Hookflash Time Selection 1 (600ms) 1 = 40ms 2 = 60ms 3 = 80ms 4 = 100ms 5 = 140ms 6 = 160ms 7 = 200ms 8 = 400ms...
Page 758: 81-12: Trunk Pad Level Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-12: Trunk Pad Level Data Setup Level: Description to define the various initial data for Program 81-12: Trunk Pad Level Data Setup TLI/DTI/DID/BRT/PRT package. Input Data Trunk Number...
Page 759: 81-13: E1 Trunk Timer Setup (Ot)
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-13: E1 Trunk Timer Setup (OT) Level: Description Use Program 81-13: E1 Trunk Timer Setup to define the basic timer setting of E1 Trunk. Trunk Port Number 1~200...
Page 760 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default 1~255 Transmit Answer duration Time 304ms (8ms ~ 2040ms) 1~255 Transmit Double Answer 2048ms duration Time (64ms ~ 16320ms) 1~255 Receive Answer min. Time 200ms (8ms ~ 2040ms) 1~255 Receive Answer max Time...
Page 761 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default 1~32 Group A Response Time 12sec (1sec ~ 32sec) 1~32 Group A Tone Complete Time 12sec (1sec ~ 32sec) 1~32 Group B Response Time 12sec (1sec ~ 32sec) 1~32 Group B Tone Complete Time...
Page 762: 81-14: Diopu(Ld Trunk) Codec(Qslac) Filter Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-14: DIOPU(LD Trunk) CODEC(QSLAC) Filter Data Setup Level: Description Use Program 81-14: DIOPU(LD Trunk) CODEC(QSLAC) Filter Data Setup to define the CODEC Filter data. Item Name Input Data...
Page 763 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 764 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1) 0-255 GR Filter Coefficients(2)
Page 765: 81-15: Tliu(2W) Codec(Qslac) Filter Data Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-15: TLIU(2W) CODEC(QSLAC) Filter Data Setup Level: Description Use Program 81-15: TLIU(2W) CODEC(QSLAC) Filter Data Setup to define the TLIU(2W) CODEC(QSLAC) Filter data. Item Name Input Data Default...
Page 766 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 767 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1) 0-255 GR Filter Coefficients(2)
Page 768: 81-16: Tliu(4W) Codec(Qslac) Filter Data Setup
Issue 10.1 UNIVERGE SV8100 Program 81 : Basic Hardware Setup for Trunk 81-16: TLIU(4W) CODEC(QSLAC) Filter Data Setup Level: Description Use Program 81-15: TLIU(4W) CODEC(QSLAC) Filter Data Setup to define the TLIU(4W) CODEC(QSLAC) Filter data. Item Name Input Data Default...
Page 769 UNIVERGE SV8100 Issue 10.1 Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 770 Issue 10.1 UNIVERGE SV8100 Item Name Input Data Default X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1) 0-255 GR Filter Coefficients(2)
Page 771: 81-17: Codec Filter Option Data Type Setup
UNIVERGE SV8100 Issue 10.1 Program 81 : Basic Hardware Setup for Trunk 81-17: CODEC Filter Option Data Type Setup Level: Description Use Program 81-17: CODEC Filter Option Data Type Setup to define the CODEC Filter option data type. Input Data...
Page 772 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 736 Program 81 : Basic Hardware Setup for Trunk...
Page 773: Program 82 : Basic Hardware Setup For Extension
Program 82 : Basic Hardware Setup for Extension 82-01 : Incoming Ring Tone Level: Level: IN (OT) MF (AU) Description to set the incoming ring tones, which Program 82-01: Incoming Ring Tone are the tones a user hears when a call rings an extension. These tones are Program grouped into four ring tone Ranges (1~4), also called patterns, that consist of a combination of frequencies.
Page 774 Issue 10.1 UNIVERGE SV8100 Item No. Item Input Data = 520Hz Frequency 1 = 540Hz Frequency 2 = 660Hz = 760Hz = 1100Hz = 1400Hz = 2000Hz = No Modulation Modulation = 8Hz Modulation = 16Hz Modulation = Envelope Default...
Page 775 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Distinctive Ringing Tones and Flash Patterns  Selectable Ring Tones  Programming Manual 2 - 739...
Page 776: Dss Console Led Pattern Setup
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-03 : DSS Console LED Pattern Setup Level: Level: IN (OT) (AU) Description to define the LED patterns for Program 82-03 : DSS Console LED Pattern Setup special functions on a DSS console.
Page 777 UNIVERGE SV8100 Issue 10.1 LED Pattern 4 : [IR: On(125ms)/Off(125ms)/On(125ms)/Off(625ms)] LED Pattern 5 : [IL: On(875ms)/Off(125ms)] LED Pattern 6 : [IW: On(625ms)/Off(125ms)/On(125ms)/Off(125ms)] LED Pattern 7 : [ON] Conditions None Feature Cross Reference Direct Station Selection (DSS)  Programming Manual 2 - 741...
Page 778: 82-04: Lca Initial Data Setup
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-04: LCA Initial Data Setup Level: Level: IN (OT) MF (AU) Description Use Program 82-04: LCA Initial Data Setup to set the basic data of the LCA. Input Data Item No.
Page 779 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 743...
Page 780: 82-05: Isdn Bri&Pri Layer2 (S-Point) Initial Data Setup
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-05: ISDN BRI&PRI Layer2 (S-Point) Initial Data Setup Level: Description Use Program 82-05: ISDN BRI & PRI Layer2 (S-Point) Initial Data Setup to set the basic data for the Layer 2 of ISDN BRI/PRI S-Point.
Page 781: 82-06: Isdn Bri&Pri Layer3 (S-Point) Timer Setup
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-06: ISDN BRI&PRI Layer3 (S-point) Timer Setup Level: Description Use Program 82-06: ISDN BRI&PRI Layer3 (S-Point) Timer Setup to set the basic timer for the layer 3 of ISDN BRI & PRI S-Point.
Page 782 Issue 10.1 UNIVERGE SV8100 Input Data 1~254(sec) 30(sec) T321 1~254(sec) 4(sec) T322 Conditions None Feature Cross Reference None 2 - 746 Program 82 : Basic Hardware Setup for Extension...
Page 783: 82-07: Codec Filter Setup For Analog Station Port
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-07: CODEC Filter Setup for Analog Station Port Level: Description CODEC Filter Setup for Analog Station Port to set the filter Program 82-07: value of the CODEC (QSLAC) filter of each analog port.
Page 784: Sidetone Volume Setup
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-08 : Sidetone Volume Setup Level: Description Use Program 82-08: Sidetone Volume Setup for adjusting the telephone side tone volume. There are two levels, based on whether the connected trunk is a digital trunk or analog trunk.
Page 785: 82-09: Lca Codec Filter Data Setup
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-09: LCA CODEC Filter Data Setup Level: Description Use Program 82-09: LCA CODEC Filter Data Setup to define the filter setting data (when Program 82-07 is set to 4).
Page 786 Issue 10.1 UNIVERGE SV8100 Input Data Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 787 UNIVERGE SV8100 Issue 10.1 Input Data Item Name Input Data Default X Filter Coefficients(6) 0-255 X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1)
Page 788: 82-11: Lca Initial Data Setup (Au)
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-11: LCA Initial Data Setup (AU) Level: Description Use Program 82-11: LCA Initial Data Setup to define the various timers for LCA Packages. Input Data Item Description Input...
Page 789: 82-12: Opx Initial Data Setup (Au)
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-12: OPX Initial Data Setup (AU) Level: Description Use Program 82-12: OPX Initial Data Setup to define the various initial data for OPX packages. Input Data Item Description...
Page 790: 82-14: Handset/Headset Gain Setup For Multi Line Telephone
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-14: Handset/Headset Gain Setup for Multi Line Telephone Level: Description Use Program 82-14: Handset/Headset Gain Setup for Multi Line Telephone to define the Handset/Headset Gain Level for Multi Line Telephone.
Page 791: 82-15: Opx Codec(Qslac) Filter Data Setup
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-15: OPX CODEC(QSLAC) Filter Data Setup Level: Description Use Program 82-15: OPX CODEC(QSLAC) Filter Data Setup to define the filter data setup information (when Program 82-07 is set to 4).
Page 792 Issue 10.1 UNIVERGE SV8100 Input Data Item Name Input Data Default Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11) 0-255 Z Filter Coefficients(12)
Page 793 UNIVERGE SV8100 Issue 10.1 Input Data Item Name Input Data Default X Filter Coefficients(6) 0-255 X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12) 0-255 GR Filter Coefficients(1)
Page 794: 82-16: Sli Codec(Qslac) Filter Data Setup
Issue 10.1 UNIVERGE SV8100 Program 82 : Basic Hardware Setup for Extension 82-16: SLI CODEC(QSLAC) Filter Data Setup Level: Description Use Program 82-16: SLI CODEC(QSLAC) Filter Data Setup to define the filter data setup information (when Program 82-07 is set to 4).
Page 795 UNIVERGE SV8100 Issue 10.1 Input Data Item Name Input Data Default Z Filter Coefficients(4) 0-255 Z Filter Coefficients(5) 0-255 Z Filter Coefficients(6) 0-255 Z Filter Coefficients(7) 0-255 Z Filter Coefficients(8) 0-255 Z Filter Coefficients(9) 0-255 Z Filter Coefficients(10) 0-255 Z Filter Coefficients(11)
Page 796 Issue 10.1 UNIVERGE SV8100 Input Data Item Name Input Data Default X Filter Coefficients(5) 0-255 X Filter Coefficients(6) 0-255 X Filter Coefficients(7) 0-255 X Filter Coefficients(8) 0-255 X Filter Coefficients(9) 0-255 X Filter Coefficients(10) 0-255 X Filter Coefficients(11) 0-255 X Filter Coefficients(12)
Page 797: 82-17: Codec Filter Option Data Type Setup
UNIVERGE SV8100 Issue 10.1 Program 82 : Basic Hardware Setup for Extension 82-17: CODEC Filter Option Data Type Setup Level: Description Use Program 82-17: CODEC Filter Option Data Type Setup to define the CODEC Filter option data type. Input Data...
Page 798 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 762 Program 82 : Basic Hardware Setup for Extension...
Page 799: Program 84 : Hardware Setup For Voip
Program 84 : Hardware Setup for VoIP 84-01 : H.323 Trunk Basic Information Setup Level: Description Use Program 84-01 : H.323 Trunk Basic Information Setup to set the basic information of the H.323 Trunk. Program Input Data Item Item Input Data Default Number of G.711 audio frames 0 = Disable...
Page 800 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~160ms G.711 Jitter Buffer( min) 0~160ms G.711 Jitter Buffer (average) 0~160ms G.711 Jitter Buffer (max) 0~270m G.723 Jitter Buffer( min) 0~270ms G.723 Jitter Buffer (average) 0~270ms G.723 Jitter Buffer (max)
Page 801 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0 = V.27ter, 2400bps The Maximum FAX Transmission Rate 1 = V.27ter, 4800bps 2 = V.29, 7200bps 3 = V.29, 9600bps 4 = V.17, 12000bps 5 = V.17, 14400bps...
Page 802 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default Eflag Setting at Head DIS (FAX Relay item) TFOP Protocol (FAX Relay item) 0 = Disable 1 = Enable NSF Superscription (FAX Relay item) ECM (Error Correction Mode) Enable Modified Read Code...
Page 803 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  Programming Manual 2 - 767...
Page 804: H.225 And H.245 Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-02 : H.225 and H.245 Information Basic Setup Level: Description Use Program 84-02 : H.225 and H.245 Information Basic Setup to define the basic setup information of H.225 and H.245.
Page 805 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0~255 ARQ Retry Count 0~255sec RAS BRQ Timer 0~255 BRQ Retry Count 0~255sec RAS IRR Timer 0~255 IRR Retry Count 0~255sec RAS DRQ Timer 0~255 DRQ Retry Count 0~255sec...
Page 806: Ip Phone Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-03 : IP Phone Information Basic Setup Level: Description Use Program 84-03: IP Phone Information Basic Setup to define the details of Dterm IP. Input Data Item Item Input Data...
Page 807 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0x00-0xff Type of service (use line keys 1-6 This data will be sent to NGT Terminal when NGT for letters A-F) Terminal is registered. 1-512 Start Port This entry indicates the starting port number for IP terminals.
Page 808: Firmware Download Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-07 : Firmware Download Setup Level: Description Use Program 84-07 : Firmware Download Setup to configure the settings related to Central Firmware Download for IP Phones. Input Data Item...
Page 809: Firmware Name Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-08 : Firmware Name Setup Level: Description Use Program 84-08 : Firmware Name Setup to set up the directory and filename for the firmware that is downloaded to IP phones.
Page 810: Vlan Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-09 : VLAN Setup Level: Description Use Program 84-09: VLAN Setup to set up the VLAN data. I/F No.2 The packets send from LAN I/F on VoipDB is set the VLAN tag.
Page 811: Tos Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-10 : ToS Setup Level: Description Use Program 84-10 : ToS Setup to set up the Type of Service data. Input Data Protocol Type 1 = DRS 2 = Protims 3 = Voice Control 4 = H.323...
Page 812 Issue 10.1 UNIVERGE SV8100 Conditions The system must be reset for these program options to take affect.  Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 776 Program 84 : Hardware Setup for VoIP...
Page 813: Ip Codec Information Basic Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-11 : IP CODEC Information Basic Setup term ® Level: Description term Use Program 84-11 : D IP CODEC Information Basic Setup to set voice (RTP packet) encoding parameters.
Page 814 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0~255ms (Note 2) G.711 Jitter Buffer - Standard Set the average value of the G.711 Jitter Buffer. Moreover, this option is adjusted with the SV8100 as it is used by both IP terminals and...
Page 815 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 0~300ms (Note 1) G.729 Jitter Buffer - Maximum Set the maximum G.729 Jitter Buffer. Moreover, this option is adjusted with the SV8100 as it is used by both IP terminals and...
Page 816 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default = static Jitter Buffer Mode = adaptive during Set the mode of the Jitter Buffer. silence 1 = Size set to the fixed (standard) amount = adaptive for the codec. immediately 2 = The minimum/maximum range for the codec is used.
Page 817 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default = 2 wire & 4 wire Echo Canceller NLP Mode = 2 wire only Non-linear processing mode. Enable this option to decrease the low level echo. When NLP is enabled, the voice with low level is replaced with NLP noise.
Page 818 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0 = Disable DTMF Level High 1 = -33dBm Used only by IPLB. 28 = -6dBm 0 = Disable DTMF Level Low 1 = -33dBm Used only by IPLB. 28 = -6dBm Note 1: For IPLA, 0~270ms is valid.
Page 819: 84-12: Networking Codec Information Basic Setup (Ot)
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-12: Networking CODEC Information Basic Setup (OT) Level: Description Use Program 84-12: Networking CODEC Information Basic Setup to define the CODEC Information for Networking. Input Data Item Item Input Data...
Page 820 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = Disable G.729 Silence Compression (VAD) Mode = Enable Select whether to compress silence with G.729. When there is silence, the RTP packet is not sent. 0~300ms (Note 1) G.729 Jitter Buffer - Minimum...
Page 821 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = static Jitter Buffer Mode = adaptive during silence Set the mode of the Jitter Buffer. = adaptive immediately 1 = Size set to the fixed amount for the codec.
Page 822 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = 2 wire & 4 wire Echo Canceller NLP Mode = 2 wire only Non-linear processing mode. Enable this option to decrease the low level echo. When NLP is enabled, the voice with low level is replaced with NLP noise.
Page 823 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = Disable DTMF Relay Mode = RFC2833 If VoIPU, the systems refers to PRG 84- = VoIPU 06-10 setting. = Disable FAX Relay Mode = Enable Select “2” for FAX Relay to SLT...
Page 824: Sip Trunk Codec Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-13 : SIP Trunk CODEC Information Basic Setup Level: Description Use Program 84-13: SIP Trunk CODEC Information Basic Setup to set up the basic CODEC options for SIP trunks.
Page 825 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = Disable G.729 Silence Compression (VAD) Mode = Enable Select whether to compress silence with G.729. When there is silence, the RTP packet is not sent. 0~300ms (Note 1) G.729 Jitter Buffer - Minimum...
Page 826 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = static Jitter Buffer Mode = adaptive during silence Set the mode of the Jitter Buffer. = adaptive immediately 1 = Size set to the fixed amount for the codec.
Page 827 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = Mode0 Signal limiter = Mode1 Set the Signal Limiter Mode. = Mode2 Not used by IPLB. = Mode3 = Mode4 = Mode5 1. There is no limitation. 2. The limitation is the maximum.
Page 828 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0-40 (-20~+20) 20 (0 dbm) RX (Receive) Gain 0 = -20 dbm Define the setting to amplify and to 1 = -19 dbm attenuate the size of the received voice.
Page 829 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0~255ms (Note 2) G.722 Jitter Buffer - Maximum Set the maximum G.722 Jitter Buffer. = 10 ms G.726 Audio Frame = 20 ms Maximum number of G.726 Audio = 30 ms Frames.
Page 830 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 96-127 ILBC Payload Number The payload number of iLBC is set. However, the same number as Item 31 cannot be set. 0 = Disable RTP Filter 1 = Enable...
Page 831 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 96~127 T.38 RTP Format Payload Number 0 = VoIPU default value DTMF Level Mode 1 = Main soft value Used only by IPLB. 0 = Disable DTMF Level High 1 = -33dBm Used only by IPLB.
Page 832: Sip Trunk Basic Information Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-14 : SIP Trunk Basic Information Setup Level: Description Use Program 84-14: SIP Trunk Basic Information Setup to define the basic setup for SIP trunks. Input Data Item Item...
Page 833 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default E.164 Incoming/Outgoing via SIP 0 = Off Trunk URI 1 = Mode 1 When making an incoming or 2 = Mode 2 outgoing call via SIP trunk, enable 3 = Mode 3 or disable conversion of SIP-URI to from E.164 format (E.g.
Page 834 Issue 10.1 UNIVERGE SV8100 Conditions Note Feature Cross Reference None 2 - 798 Program 84 : Hardware Setup for VoIP...
Page 835: H.323/Sip Phone Keep Alive Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-15 : H.323/SIP Phone Keep Alive Setup Level: Description Use Program 84-15: H.323/SIP Phone Keep Alive Setup to set the Keep Alive Configuration of the H.323/SIP phone. Input Data...
Page 836: Voip Limiter Control Gain Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-16 : VoIP Limiter Control Gain Setup Level: Description Use Program 84-16 : VoIP Limiter Control Gain to set the Limiter Control Gain configuration of VoIP. Input Data Item...
Page 837: Sip Extension Codec Information Basic Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-19 : SIP Extension CODEC Information Basic Setup Level: Description Use Program 84-19 : SIP Extension CODEC Information Basic Setup to define the CODEC information for the SIP extensions.
Page 838 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = Disable G.729 Silence Compression (VAD) Mode = Enable Select whether to compress silence with G.729. When there is silence, the RTP packet is not sent. 0~300ms (Note 1) G.729 Jitter Buffer - Minimum...
Page 839 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = static Jitter Buffer Mode = adaptive during Set the mode of the Jitter Buffer. silence 1 = Size set to the fixed amount for the = adaptive immediately codec.
Page 840 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default = Mode0 Signal Limiter = Mode1 Set the Signal Limiter Mode. = Mode2 Not used by IPLB. = Mode3 = Mode4 = Mode5 1. There is no limitation. 2. The limitation is the maximum.
Page 841 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0-40 (-20~+20) 20 (0dbm) RX (Receive) Gain 0 = -20 dbm Define the setting to amplify and to 1 = -19 dbm attenuate the size of the received voice.
Page 842 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~255ms (Note 2) G.722 Jitter Buffer - Maximum Set the maximum G.722 Jitter Buffer. = 10 ms G.726 Audio Frame = 20 ms Maximum number of G.726 Audio = 30 ms Frames.
Page 843 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 96-127 ILBC payload number The payload number of iLBC is set. However, the same number as Item31 cannot be set. 0 = Disable RTP Filter 1 = Enable To avoid incorrect voice pass connection,...
Page 844 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = VoIPU default value DTMF Level Mode 1 = Main soft value Used only by IPLB. 0 = Disable DTMF Level High 1 = -33dBm Used only by IPLB.
Page 845: Sip Extension Basic Information Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-20 : SIP Extension Basic Information Setup Level: Description Use Program 84-20 : SIP Extension Basic Information Setup to set up proxy information, session timers, called party information and expire value of invite.
Page 846: Ccis Over Ip Codec Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-21 : CCIS over IP CODEC Information Basic Setup Level: Description Use Program 84-21 : CCIS over IP CODEC Information Basic Setup to set the codec parameters of the PZ-32IPLA, PZ-64IPLA, and PZ-128IPLA.
Page 847 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 1 = 30ms G.723 Audio Frame Number 2 = 60ms 0 = Disable G.723 Voice Activity Detection Mode 1 = Enable Not used by IPLB. 0~300ms (Note 1) G723 Jitter Buffer Min...
Page 848 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 1 = Static Jitter Buffer Mode 2 = Silence Setting 2 (Self adjusting-silent period-is not valid for IPLB. If this value is set, the system will 3 = Immediate operate as Setting 3.
Page 849 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default = 20 ms iLBC Audio Frame = 30 ms Maximum number of iLBC Audio Frames. iLBC = 40 ms assumes the frame of 10ms is a unit. = Disable...
Page 850 Issue 10.1 UNIVERGE SV8100 Note 2: For IPLA, 0~160ms is valid. If set to more than 160ms, then buffer size is 160ms. Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 814 Program 84 : Hardware Setup for VoIP...
Page 851: Dt700 Multiline Logon Information Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-22 : DT700 Multiline Logon Information Setup Level: Description Use Program 84-22 : DT700 Multiline Logon Information Setup to set the DT700 Multiline logon information. Input Data Personal ID Index...
Page 852 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default Up to 32 characters No Setting Nick Name Input the Personal ID from terminal automatically when log on again. Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP) ...
Page 853: Dt700 Multiline Basic Information Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-23 : DT700 Multiline Basic Information Setup Level: Description Use Program 84-23 : DT700 Multiline Basic Information Setup to set the basic information for the DT700 Multiline Terminal. Input Data...
Page 854 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~4294967295 (sec) Digest Authorization Registration Expire Timer 0~255 Number of Password Retries (0 = No Limit) Input the number of times an incorrect password can be entered when the security key is pressed.
Page 855: Dt700 Multiline Codec Basic Information Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-24 : DT700 Multiline CODEC Basic Information Setup Level: Description Use Program 84-24 : DT700 Multiline CODEC Basic Information Setup to set the codec of each type of DT700 Multiline Telephone.
Page 856 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default G.729 Audio Frame 1 = 10ms Maximum number of G729 Audio Frames. 2 = 20ms G.729 assumes the audio signal made by a specimen by 8kHz and the frame of 10ms is...
Page 857 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 5000-7000 7000 Idle Noise Level (-5000 ~ -7000dbm) Set the noise level which is generated when 5000 = -5000dbm silent. Not used by IPLB. 7000 = -7000dbm = Disable Echo Canceller Mode...
Page 858 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default 0-40 (-20 ~ +20) 20 (0dbm) RX (Receive) Gain 0 = -20 dbm Define the setting to amplify and to attenuate 1 = -19 dbm the size of the received voice. The gain given when the voice packet is received from the VOIPDB is set.
Page 859 UNIVERGE SV8100 Issue 10.1 Item Item Input Data Default 0 = VoIPU default value DTMF Level Mode 1 = Main soft value Used only by IPLB. 0 = Disable DTMF Level High 1 = -33dBm Used only by IPLB. 28 = -6dBm...
Page 860: Netlink Codec Information Basic Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-25 : NetLink CODEC Information Basic Setup Level: Description Use Program 84-25 : NetLink CODEC Information Basic Setup to set the CODEC with NetLink. Input Data Item Item Input Data Default Number of G.711 Audio Frames...
Page 861 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default Number of G.723 Audio Frames 1 = 30ms 2 = 60ms 0 = Disable G.723 Voice Activity Detection Mode 1 = Enable Not used by IPLB. 0~270ms G.723 Jitter Buffer Min 0~270ms G.723 Jitter Buffer Average...
Page 862 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~40 (-14dbm~+14dbm) TX Gain 0 = -20dbm 1 = -19dbm 20 = 0dbm 39 = 19dbm 40 = 20dbm 0~40 (-14dbm~+14dbm) RX Gain 0 = -20dbm 1 = -19dbm...
Page 863 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default Number of G.726 Audio Frames 1 = 10ms 2 = 20ms 3 = 30ms 4 = 40ms 0 = Disabled G.726 Voice Activity Detection Mode 1 = Enabled 0~255ms (Note 2) G.726 Jitter Buffer (min)
Page 864 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = Disable DTMF Level High 1 = -33dBm Used only by IPLB. 28 = -6dBm 0 = Disable DTMF Level Low 1 = -33dBm Used only by IPLB.
Page 865: 84-26: Ipl Basic Setup (Dsp)
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-26: IPL Basic Setup (DSP) Level: Description Use Program 84-26 : IPL Basic Setup to set the IP address of IPL and the port. Index 1 Slot Number VoIP GW Number...
Page 866 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 830 Program 84 : Hardware Setup for VoIP...
Page 867: 84-27: Ipl Basic Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-27: IPL Basic Setup Level: Description Use Program 84-27: IPL Basic Setup to set the DTMF Relay and the SRTP mode of the IPL. Index 1 Slot Number Input Data...
Page 868 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~24(dB) DTMF Twist Positive Level Used only by IPLB. 0~24(dB) DTMF Twist Negative Level Used only by IPLB. 30~2000(ms) DTMF Duration (Out of Band) Used only by IPLB. Effective when 84-27-01 = 2 (Out of Band).
Page 869 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0: -9db 6 (-3db) DTMF Detect Minimum S/N Ratio 1: -8db Used only by IPLB. This is a frequency ratio setting of the 6: -3db DTMF for the frequency other than the 7: -2db DTMF tone.
Page 870: Dt700 Multiline Firmware Name Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-28 : DT700 Multiline Firmware Name Setup Level: Description Use Program 84-28: DT700 Multiline Firmware Name Setup to set the firmware name to download for the IP Phone. Index 1...
Page 871: Sip-Mlt Codec Information Fixed Mode Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-29 : SIP-MLT CODEC Information Fixed Mode Setup Level: Description Use Program 84-29 : SIP-MLT CODEC Information Fixed Mode Setup to set the CODEC data of the SIP-MLT when it uses Multicast.
Page 872 Issue 10.1 UNIVERGE SV8100 Conditions When using G.711, PRG 84-29-02 only 10ms, 20ms, 30ms and 40ms are used.  Feature Cross Reference None 2 - 836 Program 84 : Hardware Setup for VoIP...
Page 873: Voipdb Echo Canceller Setup
UNIVERGE SV8100 Issue 10.1 Program 84 : Hardware Setup for VoIP 84-31 : VoIPDB Echo Canceller Setup Level: Description Use Program 84-31 : VoIPDB Echo Canceller Setup to set the IPLB blade parameters. Input Data Type 1 = H.323 trunk...
Page 874 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~15 TDM Echo Canceller NLP Threshold Set up threshold level when echo compression is enabled. Effective when 84-31-01 = 1 0~89 (0ms~890ms) TDM Echo Canceller Tail Displacement Normally not used. Effective when...
Page 875 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0~16 (-24 ~ +24) TDM TX Voice Level Control Mode 0 = -24dB Effective when 84-31-10 = 1 1 = -21dB 8 = 0dB 15 = 21dB 16 = 24dB...
Page 876 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~16 (-24 ~ +24) TDM RX Level Control Level 0 = -24dB Normally not used. Select receive 1 = -21dB voice level. Effective when 84-31-16 = 1 8 = 0dB...
Page 877 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0~6 (-9dB ~ +9dB) RTP Echo Canceller Default ERLE Level 0 = -9dB Normally not used. Select length of 1 = -6dB echo. Effective when 84-31-19 = 1 2 = -3dB...
Page 878 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0~42 (-42 ~ 0) Type1,7,8,10, RTP TX HLC Threshold 16 = 36 0 = -42dBm Select HLC threshold level. Others = 42 1 = -41dBm Effective when 84-31-28 = 3...
Page 879 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  Programming Manual 2 - 843...
Page 880: 84-32: Fax Over Ip Codec Setup
Issue 10.1 UNIVERGE SV8100 Program 84 : Hardware Setup for VoIP 84-32: FAX Over IP CODEC Setup Level: Description Use Program 84-32: FAX Over IP CODEC Setup to program the CODECs used when faxing across CCISoIP networks. Note these settings must match in both systems for faxing across CCISoIP to work.
Page 881 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default 0,2,8,96~127 RTP Payload Type Set up RTP Payload type when  When the G.711 a-law is settings when using CCIS over IP. selected in Item 01, it is This setting should be used as possible to set “8”...
Page 882 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 846 Program 84 : Hardware Setup for VoIP...
Page 883: Program 85 : Hardware Setup For Etia Switch
Program 85 : Hardware Setup for ETIA Switch 85-01: ETIA LAN Setup (AU) Level: Description Use Program 85-01: ETIA LAN Setup to define the LAN setup for each slot. Program Input Data Hub Slot 1~24 Hub Port Item Item Input Data Default Description 0 = Enable...
Page 884 Issue 10.1 UNIVERGE SV8100 Item Item Input Data Default Description 0 = Disable 85-01-01 – Disable, Back Pressure, Half-Duplex 85-01-03 – Half-Duplex 1 = Enable When enabled, a switch applies back pressure to a half-duplex ingress port while an output queue is congested.
Page 885: 85-02: Etia Vlan Setup (Au)
UNIVERGE SV8100 Issue 10.1 Program 85 : Hardware Setup for ETIA Switch 85-02: ETIA VLAN Setup (AU) Level: Description Use Program 85-02: ETIA VLAN Setup to define the VLAN setup for each ETIA blade. The CHS2U can support up to 16, 802.1q VLANs (numbered 1 ~ 16). Program Block 85-02 assigns supported VLAN IDs, with a range of 1 ~ 4095.
Page 886 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 850 Program 85 : Hardware Setup for ETIA Switch...
Page 887: 85-03: Priority Setup (Au)
UNIVERGE SV8100 Issue 10.1 Program 85 : Hardware Setup for ETIA Switch 85-03: Priority Setup (AU) Level: Description Use Program 85-03: Priority Setup to establish the queuing prioritization rules for the low and high priority queues. Each port has a low and a high priority queue for both ingress and an egress.
Page 888 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  2 - 852 Program 85 : Hardware Setup for ETIA Switch...
Page 889: 85-04: Port Mirroring Setup (Au)
UNIVERGE SV8100 Issue 10.1 Program 85 : Hardware Setup for ETIA Switch 85-04: Port Mirroring Setup (AU) Level: Description Use Program 85-04: Port Mirroring Setup to define the port mirroring for each ETIA blade. This permits traffic from one port to be simultaneously transmitted to a second port.
Page 890: 85-05: Etia Vlan Group Settings (Au)
Issue 10.1 UNIVERGE SV8100 Program 85 : Hardware Setup for ETIA Switch 85-05: ETIA VLAN Group Settings (AU) Level: Description Use Program 85-05: ETIA VLAN Group Settings to define the VLAN group setup for each ETIA blade. Input Data Slot...
Page 891 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference Voice Over Internet Protocol (VoIP)  Programming Manual 2 - 855...
Page 892 Issue 10.1 UNIVERGE SV8100 THIS PAGE INTENTIONALLY LEFT BLANK 2 - 856 Program 85 : Hardware Setup for ETIA Switch...
Page 893: Program 90 : Maintenance Program
Program 90 : Maintenance Program 90-01: Installation Date Level: Description to define the installation date of the Program 90-01: Installation Date system. Program Input Data Item No. Item Input Data Default 00~99 00 (No Setting) Year 00 (No Setting) 01~12 Month 01~31 00 (No Setting)
Page 894: 90-02: Programming Password Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-02: Programming Password Setup Level: Description to set the system passwords. For Program 90-02: Programming Password Setup password entry, the system allows eight users to be defined. Each user can have a: Unique alphanumeric name (up to 10 alphanumeric characters) ...
Page 895 UNIVERGE SV8100 Issue 10.1 Default User User Name Password Level Level Description ****** 1 (MF) Manufacture Level - Access to all nec-i system program 12345678 2 (IN) Installer Level – Access to all IN tech level programs. 0000 3 (SA) System Administrator Level 1 –...
Page 896: 90-03: Save Data
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-03: Save Data Level: Description (This program is available only via telephone programming and not through PC Programming). to save the programmed data on the USB Flash Drive. Program 90-03: Save Data This program should be used after changing the programmed data.
Page 897: 90-04: Load Data
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-04: Load Data Level: Description (This program is available only via telephone programming and not through PC Programming). to load the system data from the inserted USB Flash Program 90-04: Load Data Drive to the SRAM and Flash ROM in the system.
Page 898: 90-05: Slot Control
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-05: Slot Control Level: Description (This program is available via telephone programming and Web Programming, but not through PC Programming). Use Program 90-05: Slot Control to reset or delete (uninstall) blades (slots 1~24).
Page 899 UNIVERGE SV8100 Issue 10.1 Feature Cross Reference None Programming Manual 2 - 863...
Page 900: 90-06: Trunk Control
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-06: Trunk Control Level: Description (This program is available via telephone programming and Web Programming, but not through PC Programming). Use Program 90-06: Trunk Control for trunk maintenance. Busy Out lets you block a blade from placing outgoing calls (just like placing the blade switch down).
Page 901: 90-07: Station Control
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-07: Station Control Level: Description (This program is available via telephone programming and Web Programming, but not through PC Programming). Use Program 90-07: Station Control for extension maintenance. Input Data Menu Number...
Page 902: 90-08: System Reset
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-08: System Reset Level: Description (This program is available only via telephone programming and not through PC Programming). Use Program 90-08: System Reset to perform a system reset. Input Data Item...
Page 903: 90-09: Automatic System Reset Time Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-09: Automatic System Reset Time Setup Level: Description Use Program 90-09: Automatic System Reset Time Setup to define the time for the system to automatically reset. Input Data Item No. Item...
Page 904: 90-10: System Alarm Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-10: System Alarm Setup Level: Description Use Program 90-10: System Alarm Setup to assign a status to system alarms. You can designate an alarm as Major or Minor. This program also assigns whether or not the alarm information is reported to the pre-defined destination.
Page 905 UNIVERGE SV8100 Issue 10.1 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status Connection The error occurred when 1.The unit is not 1.Please insert the unit When unit is fault between...
Page 906 Issue 10.1 UNIVERGE SV8100 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status Blocking The link of terminals 1.Terminal Confirm the terminal The error is connected with the ESI Breakdown. connected with same recovered package came off.
Page 907 UNIVERGE SV8100 Issue 10.1 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status Charge The link with the charge 1. Wiring problem 1. Confirmed that there When the Management management device came...
Page 908 Issue 10.1 UNIVERGE SV8100 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status CS Blocking The link of the CSIU and 1. Outgoing noise. Confirm the following The error is CS came off.
Page 909 UNIVERGE SV8100 Issue 10.1 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status CS error noti- CS detected the factor that 1. Outgoing noise. Please confirm the This error has fication 2.
Page 910 Issue 10.1 UNIVERGE SV8100 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status 1.The registration of the 1. The setting of the 1.Confirm the following The error is Registration SIP trunk to the SIP server...
Page 911 UNIVERGE SV8100 Issue 10.1 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status SIP extension More than the number of • Wrong number of 1. Confirm the number When the License Error.
Page 912 Issue 10.1 UNIVERGE SV8100 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status Data base Because the versions of The versions of 1. Confirm the version replication DB is different, replication...
Page 913 UNIVERGE SV8100 Issue 10.1 Table 2-20 Description of Alarm (Continued) Alarm Alarm Type Report Name Content of Alarm Cause Action Recovery Status NetLink link This alarm occurs when Primary system Primary system cannot error. the primary system cannot cannot communicate with...
Page 914: 90-11: System Alarm Report
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-11: System Alarm Report Level: Description Use Program 90-11: System Alarm Report to define the details of the system alarm report. Input Data Item Item Input Data Default 0 = No Report...
Page 915 UNIVERGE SV8100 Issue 10.1 Input Data Item Item Input Data Default Up to 255 Characters Customer Name Setting When alarm reports are e-mailed, enter a name to identify the particular system. 0 = Off Change SMTP Client 1 = On When enabled the system uses the programs in 47- 18-xx for email server integration.
Page 916: 90-12: System Alarm Output
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-12: System Alarm Output Level: Description Use Program 90-12: System Alarm Output to set the options for the alarm report. This program has six separate menu options. Define the output port to be used as the output for system alarm report and set the system alarm options.
Page 917: 90-13: System Information Output
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-13: System Information Output Level: Description Use Program 90-13: System Information Output to define the output port to be used as the system information output. The baud rate for the COM port should be set in Program 10-21-02.
Page 918: 90-16: Main Software Information
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-16: Main Software Information Level: Description Use Program 90-16: Main Software Information to display the main software information on the CD-CP00. Main software information can also be viewed outside of system programming by pressing Feature and the 3 key on any multiline terminal.
Page 919: 90-17: Firmware Information
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-17: Firmware Information Level: Description Use Program 90-17: Firmware Information to display the firmware versions of the various system blades. Input Data Item Item Display Data Data Format DSP Firmware Version No.
Page 920: 90-19: Dial Block Release
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-19: Dial Block Release Level: Description When the extension number is entered in Program 90-19: Dial Block Release, the extension is released from the Dial Block restriction. Input Data Extension Number...
Page 921: 90-20: Traffic Report Data Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-20: Traffic Report Data Setup Level: Description Use Program 90-20: Traffic Report Data Setup to define the details of the traffic report. Input Data Item Item Input Data Default 0 = Not Measured...
Page 922 Issue 10.1 UNIVERGE SV8100 Input Data Item Item Input Data Default 0 = Not Recorded Security Sensor Dial Record 1 = Recorded Conditions None Feature Cross Reference Traffic Reports  2 - 886 Program 90 : Maintenance Program...
Page 923: 90-21: Traffic Report Output
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-21: Traffic Report Output Level: Description Use Program 90-21: Traffic Report Output to define the output port to be used as the traffic report output. Input Data Item No. Item Input Data...
Page 924: 90-22: Terminal Version Information
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-22: Terminal Version information Level: Description Use Program 90-22: Terminal Version Information to determine the hardware and firmware versions. These are read-only commands and cannot be changed. Input Data Terminal Type...
Page 925: 90-23: Deleting Registration Of Ip Telephones
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-23: Deleting Registration of IP Telephones Level: Description (This program is available via telephone programming and Web Programming, but not through PC Programming). Use Program 90-23: Deleting Registration of IP Telephones to delete the registered IP telephone from the system.
Page 926: 90-24: System Alarm Report Notification Time Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-24: System Alarm Report Notification Time Setup Level: Description Use Program 90-24: System Alarm Report Notification Time Setup to set the date and time for the alarm report to print. Input Data...
Page 927: 90-25: System Alarm Report Cc Mail Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-25: System Alarm Report CC Mail Setup Level: Description Use Program 90-25: System Alarm Report CC Mail Setup to define the mail address to receive the system alarm report CC Mail setup.
Page 928: 90-26: Program Access Level Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-26: Program Access Level Setup Level: Description Use Program 90-26: Program Access Level Setup to define the password access level required to change a system program. Input Data Program Numbers 1001~9207...
Page 929: 90-28: User Programming Password Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-28: User Programming Password Setup Level: Description Use Program 90-28: User Programming Password Setup to set the password used to enter the user programming mode. Input Data Extension Numbers Up to eight digits...
Page 930: 90-31: Dim Access Over Ethernet
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-31: DIM Access over Ethernet Level: Description Use Program 90-31: DIM Access over Ethernet to enable DIM (Diagnostic Information Maintenance) access over the LAN, and to define the user name and password.
Page 931: 90-34: Firmware Information
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-34: Firmware Information Level: Description Use Program 90-34: Firmware Information to list the package type and firmware blades installed in the system. Input Data Slot No. 1~24 Item No. Item Display Data...
Page 932: 90-35: Wizard Programming Level Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-35: Wizard Programming Level Setup Level: Description (This program is available via telephone programming and Web Programming, but not through PC Programming). Use Program 90-35: Wizard Programming Level Setup to set the maintenance level for Wizard Programming.
Page 933: 90-36: Firmware Update Time Setting
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-36: Firmware Update Time Setting Level: Description Use Program 90-36: Firmware Update Time Setting to define the data for the firmware update feature. This data is available to set for the WebPro/PC Programming FW update feature.
Page 934 Issue 10.1 UNIVERGE SV8100 Sample Report Result Report Display Update Success Update is success. Update Time. Update Fail Update is fail. Since ‘A’ drive is not available. Update Fail Update is fail. Since main up is not exist on A drive.
Page 935: 90-37: Set Temporary License (Au)
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-37: Set Temporary License (AU) Level: Description Use Program 90-37: Set Temporary License to set the effective days of the temporary license. Input Data Item Item Input Data Default 00~10 days...
Page 936: 90-38: User Programming Data Level Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-38: User Programming Data Level Setup Level: Description Use Program 90-38: User Programming Data Level Setup sets system data to turn on/off each User Programming Feature. Program Item Item (Reference Input Data...
Page 937 UNIVERGE SV8100 Issue 10.1 Program Item Item (Reference Input Data Default Only) 30-03 0 = Turn Off 1 = Turn On DSS Key Assignment 1 = Turn On 32-02 1 = Turn On Doorphone Ringing Assignment 11-02 1 = Turn On...
Page 938 Issue 10.1 UNIVERGE SV8100 Feature Cross Reference Maintenance UserPro 2 - 902 Program 90 : Maintenance Program...
Page 939: 90-39: Virtual Loop Back Port Reset
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-39: Virtual Loop Back Port Reset Level: Description Use Program 90-39: Virtual Loop Back Port Reset to reset to initial status. (Not supported in V1.0) Input Data Item Item Input Data...
Page 940: 90-41: Server Setting To Update Terminal Local Data
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-41: Server Setting to Update Terminal Local Data Level: Description Use Program 90-41: Server Setting to Update Terminal Local Data to define the Primary DNS Server address, the Secondary DNS Server address and the Data Roaming Server address.
Page 941: 90-42: Dt700 Multiline Terminal Version Information
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-42: DT700 Multiline Terminal Version Information Level: Description Use Program 90-42: DT700 Multiline Terminal Version Information to set the hardware version and firmware version of the DT700 MLT Terminal. Input Data...
Page 942: 90-43: Deleting Terminal License Of Dt700
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-43: Deleting Terminal License of DT700 Level: Description Use Program 90-43: Deleting Terminal License of DT700 to delete the terminal license information delivered to the DT700 terminal. Input Data Extension Number...
Page 943: 90-44: Deleting Terminal License Of Tcp Interface
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-44: Deleting Terminal License of TCP Interface Level: Description Use Program 90-44: Deleting Terminal License of TCP Interface to delete the terminal license information delivered to the terminal with a TCP interface.
Page 944: 90-45: Temporary Password Change For Multiline Telephone
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-45: Temporary Password Change for Multiline Telephone Level: Description Use Program 90-45: Temporary Password Change for Multiline Telephone to change the Temporary Password that is set in the Encryption function. Input Data...
Page 945: 90-48: Button Kit Information Of Multiline Telephone
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-48: Button Kit Information of Multiline Telephone Level: Description Use Program 90-48: Button Kit Information of Multiline Telephone to set the button kit information on a new telephone on the SV8100 system.
Page 946: 90-49: Protection Mode Setup For Multiline Telephone
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-49: Protection Mode Setup for Multiline Telephone Level: Description Use Program 90-49: Protection Mode Setup for Multiline Telephone to set the protection mode of each multiline (IP) telephone. Input Data Extension Number...
Page 947: 90-50: System Alarm Display Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-50: System Alarm Display Setup Level: Description Use Program 90-50: System Alarm Display Setup to set the system alarm report display. Input Data Index Number 01~50 Item Item Input Data Default...
Page 948: 90-51: Alarm Setup For Maintenance Exchange
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-51: Alarm Setup for Maintenance Exchange Level: Description Use Program 90-51: Alarm Setup for Maintenance Exchange to set the day for the maintenance exchange of parts that need regular maintenance. Input Data...
Page 949 UNIVERGE SV8100 Issue 10.1 Conditions None Feature Cross Reference None Programming Manual 2 - 913...
Page 950: 90-52: System Alarm Save
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-52: System Alarm Save Level: Description Use Program 90-52: System Alarm Save for the system alarm output operation. Input Data System ID of Source System 0~50 System ID of Destination System...
Page 951: 90-53: System Alarm Clear
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-53: System Alarm Clear Level: Description Use Program 90-53: System Alarm Clear to clear the system alarm. Input Data System ID 0~50 Item Item Input Data Default All Clear? (1 = Yes)
Page 952: 90-54: Pc/Web Programming
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-54: PC/Web Programming Level: Description Use Program 90-54: PC/Web Programming sets parameters for PC and Wed Programming. Item Item Input Data Default 1-65535 Web Pro TCP port number The port number of TCP of the Web programming is set.
Page 953: 90-55: Free License Select
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-55: Free License Select Level: Description Use Program 90-55: Free License Select to validate the Free License. (This program is available only via telephone programming and not through PC Programming). Input Data...
Page 954: 90-56: Ntp Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-56: NTP Setup Level: Description Use Program 90-56: NTP Setup to set the NTP. Item Item Input Data Default 0 = No NTP Synchronize 1 = Yes IPv4 form: No setting Server Address xxx.xxx.xxx.xxx...
Page 955: 90-57: Backup Recovery Data
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-57: Backup Recovery Data Level: Description Use Program 90-57: Backup Recovery Data to backup the system data in the flash memory on the CD-CP00 and to make the recovery data. Input Data Data ID Item No.
Page 956: 90-58: Restore Recovery Data
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-58: Restore Recovery Data Level: Description Use Program 90-58: Restore Recovery Data to select the recovery data stored in the flash memory of the CD-CP00. After this command is executed, the system restarts automatically.
Page 957: 90-59: Delete Recovery Data
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-59: Delete Recovery Data Level: Description Use Program 90-59: Delete Recovery Data to select and delete the recovery data stored in the flash memory of the CD-CP00. Input Data Data ID Item No.
Page 958: 90-60: T1/Isdn Layer Status Information
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-60: T1/ISDN Layer Status Information Level: Description Use Program 90-60: T1/ISDN Layer Status Information to display layer status information for T1/PRI/E1/BRI/CD-CCTA packages. Input Data System ID 1~50 Slot No. 1~24 Item No.
Page 959: 90-61: Manual Slot Install
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-61: Manual Slot Install Level: Description Use Program 90-61: Manual Slot Install to manually install any package. If another package is already assigned, the new package cannot be assigned. Input Data...
Page 960: 90-63: Dt700 Control
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-63: DT700 Control Level: Description Use Program 90-63: DT700 Control to adjust settings of the DT700. Input Data Item Item Input Data Default 0~255 Priority Timer Conditions None Feature Cross Reference...
Page 961: 90-64: Snmp Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-64: SNMP Setup Level: Description Use Program 90-64: SNMP Setup to configure the SNMP function. Input Data Item Item Input Data Default 0 = Disable SNMP 1 = Enable Max. 12 characters...
Page 962: 90-65: 1St Party Cti Authentication Password Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-65: 1st Party CTI Authentication Password Setup Level: Description Use Program 90-65: 1st Party CTI Authentication Password Setup to set the authentication password. Input Data Item Item Input Data Default Up to 16 characters...
Page 963: Side Tone Auto Setup
UNIVERGE SV8100 Issue 10.1 Program 90 : Maintenance Program 90-68 : Side Tone Auto Setup Level: Description (This program is aviable for V7000 or higher) Use Program 90-68 : Side Tone Auto Setup to automatically adjust the analog trunk CODEC Filter settings.
Page 964: Outbound Ip Connection Setup
Issue 10.1 UNIVERGE SV8100 Program 90 : Maintenance Program 90-69 : Outbound IP Connection Setup Level: Description Use Program 90-69 : Outbound IP Connection Setup to set the outbound IP connection information. Input Data Item Item Input Data Default 1~65535...
Page 965: Program 92 : Copy Program
Program 92 : Copy Program 92-01 : Copy Program Level: Description (This program is available only via telephone programming and not through PC Programming). Program Use Program 92-01 : Copy Program to copy the data for one program to another multiline terminal, port, group, or other number. Refer to the following charts to see which programs can be copied.
Page 966 Issue 10.1 UNIVERGE SV8100 The Copy Program is applicable only for the following programs: Trunk Port Base Program Program Name Note 14-01 Copy all data except Trunk Name Trunk Basic Data Setup (Item 01). 14-02 Analog Trunk Data Setup 14-04...
Page 967 UNIVERGE SV8100 Issue 10.1 Program Program Name Note 15-03 Single Line Telephone Basic Data Setup 15-06 Trunk Access Map for Extension 15-07 Programmable Function Key 15-08 Incoming Virtual Extension Ring Tone Setup 15-09 Virtual Extension Ring Assignment 15-10 Incoming Virtual Extension Ring Tone Order...
Page 968 Issue 10.1 UNIVERGE SV8100 35-04 SMDR Port Assignment for Department Group DSS Console Base Program Program Name Note 30-01 DSS Console Operation Mode 30-03 DSS Key Assignment Door Box Base Program Program Name Note 32-02 Door Box Ring Assignment Conditions Using this program to copy a multiline terminal Programmable Function Keys, ...
Page 969: Delete All Extension Numbers
UNIVERGE SV8100 Issue 10.1 Program 92 : Copy Program 92-02 : Delete All Extension Numbers Level: Description (This program is available only via telephone programming and not through PC Programming). Use Program 92-02: Delete All Extension Numbers to delete all extension numbers.
Page 970: Copy Program By Port Number
Issue 10.1 UNIVERGE SV8100 Program 92 : Copy Program 92-03 : Copy Program by Port Number Level: Description (This program is available only via telephone programming and not through PC Programming). Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each outside line.
Page 971: Extension Data Swap
UNIVERGE SV8100 Issue 10.1 Program 92 : Copy Program 92-04 : Extension Data Swap Level: Description (This program is available only via telephone programming and not through PC Programming). Use Program 92-04 : Extension Data Swap to swap data between two extensions.
Page 972 Issue 10.1 UNIVERGE SV8100 Program Number Program Name 15-12 Conversation Recording Destination for Extension 15-13 Loop Key Data 15-14 Programming One-Touch Keys 15-17 CO-Message Waiting Indication 15-18 Virtual Extension Key Enhance Options 15-19 System Telephone book Setup for Extension 15-20...
Page 973 UNIVERGE SV8100 Issue 10.1 Program Number Program Name 24-09 Call Forward Split Settings 26-04 ARS Class of Service 26-07 LCR Cost Center Code Table 31-02 Internal Paging Group Assignment 41-02 ACD Agent Extension Assignment for ACD Group 41-17 ACD Login Mode Setup...
Page 974: Extension Data Swap Password
Issue 10.1 UNIVERGE SV8100 Program 92 : Copy Program 92-05 : Extension Data Swap Password Level: Description Use Program 92-05 : Extension Data Swap Password to define the 4-digit password for each extension to allow Extension Data Swap. Input Data...
Page 975: Fill Command
UNIVERGE SV8100 Issue 10.1 Program 92 : Copy Program 92-06 : Fill Command Level: Description Use Program 92-06 : Fill Command to allocate the data of each extension number of each extension group or each table. Input Data Program Number...
Page 976 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 940 Program 92 : Copy Program...
Page 977: Delete Command
UNIVERGE SV8100 Issue 10.1 Program 92 : Copy Program 92-07 : Delete Command Level: Description Use Program 92-07 : Delete Command to delete the data of each extension number of each extension group or each table. Input Data Program Number...
Page 978 Issue 10.1 UNIVERGE SV8100 Conditions None Feature Cross Reference None 2 - 942 Program 92 : Copy Program...
Page 979: Program 93: System Information
Program 93: System Information 93-01 : Day/Night Mode Information Level: Description Use Program 93-01 : Day/Night Mode Information to display day/night mode for night mode service group. Program Input Data Night Mode Service Group No. 01 ~ 32 Item Related Item Input Data Default...
Page 980: Trunk Information
Issue 10.1 UNIVERGE SV8100 Program 93: System Information 93-02 : Trunk Information Level: Description Use Program 93-02 : Trunk Information to display the setting of each trunk. Input Data Trunk Port Number. 1 ~ 200 Item Related Item Input Data...
Page 981: Extension Information
UNIVERGE SV8100 Issue 10.1 Program 93: System Information 93-03 : Extension Information Level: Description Use Program 93-03 : Extension Information to display the settings of each extension. Input Data Extension Number Up to 8 digits Item Related Item Input Data...
Page 982 Issue 10.1 UNIVERGE SV8100 Item Related Item Input Data Default Program 0:Disable None 11-11-07 Call Forwarding – Follow-Me 1:Enable Read only. Indicates Call Forward- Follow-Me setting status per extension. None 11-11-07 Extension Number Call Forwarding Follow- Me Destination. (Up to 8 digits) Read only.
Page 983 UNIVERGE SV8100 Issue 10.1 Item Related Item Input Data Default Program 0 = Disable(Voice) None 11-11-15 Forced Intercom Ring 11-11-16 (ICM Call Type) 1 = Enable(Signal) Read only. Indicates ICM Call Type per extension. 0 = Disable None 11-11-18 1 = Enable Read only.
Page 984: Redial List
Issue 10.1 UNIVERGE SV8100 Program 93: System Information 93-04 : Redial List Level: Description Use Program 93-04 : Redial List to display the redial list of each extension. Input Data Extension Number. Up to 8 digits Input Data Redial List Number...
Page 985: Department Group Information
UNIVERGE SV8100 Issue 10.1 Program 93: System Information 93-05 : Department Group Information Level: Description Use Program 93-05 : Department Group Information to display the settings of each department group. Input Data Department Group Number. 1 ~ 64 Item Related...
Page 986 ROGRAMMING ANUAL NEC Corporation Issue 10.1...

NEC Univerge SV8100 Programming Manual

Chapter 1 Introduction

Before You Start Programming

How to Use this Manual

How to Enter Programming Mode

Programming Names and Text Messages

What the Softkey Display Prompts Mean

System Number Plan/Capacities

Chapter 2 Programming the UNIVERGE SV8100

Programming Your System

Program 13 : Abbreviated Dialing

Program 14 : Trunk, Basic Setup

Program 22 : Incoming Call Setup

Program 23 : Answer Features Setup

Program 24 : Hold/Transfer Setup

Program 30 : DSS/DLS Console Setup

Program 31 : Paging Setup

Quick Links

Related Manuals for NEC Univerge SV8100

Summary of Contents for NEC Univerge SV8100