Related Manuals for Motorola HDT 600
Summary of Contents for Motorola HDT 600
- Page 1 Owner’s Manual HDT 600 Handheld Data Terminal 68P02966C70-A 68P02966C70-A @6802966C70@...
-
Page 2: Table Of Contents
Contents COMPUTER SOFTWARE COPYRIGHTS...... iii FCC INTERFERENCE WARNING......... vi What is the HDT 600 Terminal ........1 HDT 600 Parts ..............3 Unpacking ............... 4 HDT 600 Cradle Connections ......... 5 Installing the Battery............6 Removing the Battery............6 First Time Battery Charge ..........7 Charging the Battery ............ - Page 3 This page intentionally left blank...
-
Page 4: Computer Software Copyrights
Motorola. Motorola assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of Motorola. Unless made in a separate writ- ten agreement between Motorola and the original end user purchaser, Motorola does not warrant the installation, maintenance or service of the Product. - Page 5 This warranty sets forth the full extent of Motorola’s responsibilities regarding the Product. Repair, replacement or refund of the purchase price, at Motorola’s option, is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES. MOTOROLA DIS-...
- Page 6 Motorola will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or its parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: A) that Motorola will be notified promptly in writing by such purchaser of any notice of such claim;...
-
Page 7: Fcc Interference Warning
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications made in the radio terminal, not expressly approved by Motorola, will void the user's authority to operate the equipment. For detailed product safety and RF exposure for portable terminals with two-way radios, refer to Electro- magnetic Emission (EME) safety leaflet, Motorola publication number 68P02965C93. -
Page 8: What Is The Hdt 600 Terminal
CE 3.0 operating system with touch screen and soft-keys provides easy access to various applications. The HDT 600 is equipped with a 3.6 inch color LCD screen with LED front-light, viewable in all light conditions, including direct sunlight. The touch sensitive screen enables signature capture as well as easy selection from an on-screen menu. - Page 9 DataTAC network infrastruc- ture. 3. An optional iDEN (Harmony) radio module provides coverage within the private iDEN network infrastructure. It is also possible to use GPRS and WLAN communication by installing both radios within the HDT 600.
-
Page 10: Hdt 600 Parts
Barcode Scanner Triggers Battery Battery Lock Hand Strap Touch Sensitive Screen Stylus Pen Function Soft Keys Stylus Pen Silo Battery Charge & Communication Contacts Terminal Release Button Terminal Release Button HDT 600 Cradle Red LED indicating HDT 600 locked into Cradle... -
Page 11: Unpacking
The battery is shipped from factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time. See “First Time Battery Charge” on page 7. -
Page 12: Hdt 600 Cradle Connections
HDT 600 Cradle Connections Important Note: This product should be installed according to local applicable laws and directives. The HDT 600 terminal can HDT 600 Cradle communicate with a host PC directly through its communication port RS232 Cable to PC COM Port... -
Page 13: Installing The Battery
Installing the Battery The battery is shipped from the factory uncharged and not installed. Charge the battery before using the HDT 600 for the first time. 1. Before installing the battery, release the terminal hand strap, as shown below. 2. Verify that the battery lock is in Unlock position. -
Page 14: First Time Battery Charge
1. Turn the HDT 600 off by holding the Power button pressed for at least two seconds. 2. Release the terminal hand strap as shown in the figure above. 3. Use a coin to unlock the battery by turning the battery lock counter-clockwise. -
Page 15: Charging The Battery
Charging the Battery The LED indicator displays your charge status (See figure below). Please note that the HDT 600 can be On, Off or in Suspend mode while charging. LED indicator Red: charging Green: battery full Push back to lock... -
Page 16: Battery Maintenance
The HDT 600 will not charge if not locked into the Cradle. Once the HDT 600 is locked, the Cradle red LED will turn on, indi- cating lock status. 3. To remove the HDT 600 from the Cradle, press the unlock but- ton(s) until the HDT 600 unlocks, and remove the HDT 600 from the Cradle. -
Page 17: Turning On The Hdt 600
Use the Suspend mode as often as possible to save battery power. Turning off the HDT 600 When the HDT 600 is on or in Suspend mode, hold the Power but- ton pressed for at least two seconds, to turn off the HDT 600. -
Page 18: Using The Hdt 600
Using the HDT 600 When using the HDT 600, the hand strap on the back of the unit provides stability. Insert your left or right hand under the strap while holding the stylus pen in the other hand. Using the Stylus Pen The Stylus pen selects items and enters information. -
Page 19: Scanning With The Hdt 600 (Optional)
Scanning With the HDT 600 (Optional) The HDT 600 is equipped with four scan trigger buttons, designed for left-handed and right-handed users. The buttons are located on the left-hand and right-hand sides of the terminal and on the left- hand and right-hand sides of the upper front panel. -
Page 20: Resetting The Hdt 600
If your HDT 600 still does not respond perform: Cold Reset Important Note: When HDT 600 is cold reset, all information stored in its memory will be lost. 2. Simultaneously, press soft keys 2, 3 and 4 for at least five sec- onds to restart your HDT 600. -
Page 21: Cradle Installation
Using the exact cable length ensures proper power supply to the Cradle. Make sure that the power cable has a 3 Amps fuse (See “HDT 600 Cradle Connections” on page 5). - Page 22 For continued protection against risk of fire, replace only with same type and rating of fuse. Back side of HDT 600 Cradle Threaded holes for installation 4.92” (125 mm) Threaded holes M4X10 1.96 “ (50 mm) Wall Mount Bracket Dashboard Mounting...
-
Page 23: Maintaining The Hdt 600
• Protect your HDT 600 from temperature extremes. Do not leave the HDT 600 on the dashboard of a car on a hot day, and keep the HDT 600 away from hot places. •... -
Page 24: Accessories
Accessories Motorola is not responsible for the use of accessories not approved for the HDT 600 (part number F4415). The following Motorola approved accessories are for use with your terminal. Table 1: HDT 600 model F4415 - Motorola Approved Accessories... -
Page 25: What To Do If
HDT 600 in Sus- Press the Power Button pend mode HDT 600 red HDT 600 is not Reinstall HDT 600 in Cradle. LED does not locked in Cradle Lock the HDT 600 properly stop blinking in Cradle (See that the HDT... - Page 26 HDT 600 should function again If still does not respond, simultaneously press soft keys 2, 3 and 4 to restart your HDT 600. The operation sys- tem will reboot for about a minute Incomplete or HDT 600 is not Lock the HDT 600 properly...
-
Page 27: Battery Warnings And Disposal
Battery Warnings and Disposal HDT 600 On Board Aircraft Always remove the battery from the HDT 600 when shipped via air. Any use of the HDT 600 must be in accordance with applicable regulations per airline regulations. Battery Disposal Batteries must be recycled or disposed of properly in accordance with local requirements. - Page 28 Tel: 1-847-576-5000 (outside the US) Visit our Web site at www.motorola.com MOTOROLA and the Stylized M Logo are regis- tered in the U.S. Patent and Trademark Office. All other product or service names are the prop- erty of their respective owners.