Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Slide the display cable into the connector on the display panel and close the latch
to secure the cable.
2
Adhere the tape that secures the display cable to the display panel.
3
Turn the display panel over and gently place it on the display back-cover.
4
Align the screw holes on the display panel with the screw holes on the display
back-cover.
5
Replace the four screws (M2x2.5) that secure the display panel to the display
back-cover.
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
display
4
Replace the
computer
5
Replace the
wireless
6
Replace the
rear
7
Replace the battery.
8
Replace the
base
110
computer. After working inside your computer, follow
After working inside your
hinges.
bezel.
assembly.
base.
card.
cover.
cover.
computer. For more safety best
www.dell.com/
Before