Removing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
3
Remove the
rear
4
Remove the
computer
Procedure
1
Open the latch and disconnect the fingerprint-reader board cable from the
fingerprint-reader board.
2
Peel the power-button board cable from the palm-rest assembly.
3
Remove the two screws (M2x3) that secure the power-button board to the
palm-rest assembly.
computer. After working inside your computer, follow
After working inside your
cover.
cover.
base.
computer. For more safety best
www.dell.com/
Before
77