Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: pLEAsE READ THEsE INsTRUCTIONs CAREFULLY. NOTE THE sAFE OpERATIONAL REQUIREMENTs, wARNINGs & CAUTIONs.
UsE THE pRODUCT CORRECTLY AND wITH CARE FOR THE pURpOsE FOR wHICH IT Is INTENDED. FAILURE TO DO sO MAY CAUsE
DAMAGE AND/OR pERsONAL INJURY AND wILL INVALIDATE THE wARRANTY. pLEAsE KEEp INsTRUCTIONs sAFE FOR FUTURE UsE.
1. sAFETY INsTRUCTIONs
Before each use, check that there is no damage to the spreader
and that all fixings are tight.
replace or repair damaged parts. Use only recommended parts.
Unauthorised parts may be dangerous and will invalidate the
warranty.
Ensure that the operator is fully trained and competent to operate
the spreader.
Ensure that all chemical safety instructions are adhered to when
handling products for use in the spreader. A full range of personal
safety equipment is available from your sealey dealer.
Always distribute the load evenly.
Ensure all non essential personnel keep a safe distance when
the spreader is in use.
Keep hands and feet away from moving parts.
DO NOT overload the spreader - see specification.
DO NOT leave unattended, especially when loaded.
DO NOT allow anybody to sit, stand, or ride on the spreader.
DO NOT allow untrained personnel to use the spreader.
DO NOT allow children to play in or climb onto the spreader.
DO NOT use on windy days when spreading seeds or herbicides.
DO NOT tow this spreader with a motorized vehicle of any sort.
DO NOT use the spreader for purposes other than for which it is
designed.
DO NOT operate the spreader when you are tired or under the
influence of alcohol, drugs or intoxicating medicines.
When loaded, DO NOT operate the spreader over edges, rough
surfaces etc. where the spreader is at risk of overturning.
wARNING! failure to comply with these instructions may result
in damage to spreader or other property and/or personal injury.
InstructIon MAnuAL for:
broadcast spreader 57kg walk behind
spB57w
MoDEL no:
2. spECIFICATION
Model No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . spB57w
capacity (Weight). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57kg
capacity (Volume) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60ltr
spread . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 3.6mtr
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.6kg
Dimensions (W x D x H) . . . . . . . . . . . . . .790 x 1060 x 890mm
3. INTRODUCTION
Manufactured with a strong tubular steel frame and
polypropylene dispensing hopper. fitted with aluminium gear,
rain cover, pneumatic tyres and adjustable feed system. Includes
hopper screen to ease spreader flow and filter out unwanted
contaminants. sprays in 360° motion to cover a large area.
suitable for a variety of horticultural agents including grit, seed,
salt, fertiliser and weed killer.
4. AssEMBLY
Original Language Version
sPB57W
Issue: 1 - 17/06/11
Advertisement
Related Manuals for Sealey SPW57W
Summary of Contents for Sealey SPW57W
- Page 1 MoDEL no: thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: pLEAsE READ THEsE INsTRUCTIONs CAREFULLY. NOTE THE sAFE OpERATIONAL REQUIREMENTs, wARNINGs & CAUTIONs.
- Page 2 fig.1 4. AssEMBLY fig.2 AssEMBLING THE wHEELs. (refer to fig.1) please note that the left hand wheel turns freely on the axle whilst the right hand wheel is pinned to the axle and thus drives the central gearwheel. 4.1.1 Before commencing assembly, ensure that the black plastic inner axle bushing is fully inserted into the black plastic axle carrier on both sides of the axle.
- Page 3 plate rest on either side of the same cross brace nearest to the axle and are fixed in place with three M6 x 40mm Hex bolts (2) together with three M6 lock nuts (10) and three flat washers Ø6mm (6). remove any bolts that may be retaining the gear shaft mounting plate and align the holes in the support leg mounting plate with the three holes in the cross brace.
-
Page 4: Operation
fig.5 5.12 to ensure consistent coverage, make sure each broadcast 5. OpERATION pattern slightly overlaps the previous one. UsING THE spREADER. (refer to fig.6) 5.13 Make sure that any broadcast material does not come into wARNING! Do not use the spreader on windy days when contact with trees, shrubs and flowers that could be harmed by ... - Page 5 Guarantee is 12 months from purchase date, proof of which will be required for any claim. INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode. sole UK Distributor, sealey Group, www.sealey.co.uk...