free stats
Download Print this page
Sealey SPD27W Manual
Sealey SPD27W Manual

Sealey SPD27W Manual

27kg walk behind drop spreader

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
Before each use, check that there is no damage to the spreader and that all fixings are tight.
9
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Ensure that all chemical safety instructions are adhered to when handling products for use in the spreader. A full range of personal
9
safety equipment is available from your Sealey stockist.
Always distribute the load evenly.
9
Ensure all non essential personnel keep a safe distance when the spreader is in use.
9
Keep hands and feet away from moving parts.
9
DO NOT overload the spreader - see Specification.
8
DO NOT leave unattended, especially when loaded.
8
DO NOT allow anybody to sit, stand, or ride on the spreader.
8
DO NOT allow untrained personnel to use the spreader.
8
DO NOT allow children to play in or climb onto the spreader.
8
DO NOT use on windy days when spreading seeds or herbicides.
8
DO NOT tow this spreader with a motorized vehicle of any sort.
8
DO NOT use the spreader for purposes other than for which it is designed.
8
DO NOT operate the spreader when you are tired or under the influence of alcohol, drugs or intoxicating medicines.
8
When loaded, DO NOT operate the spreader over edges, rough surfaces etc. where the spreader is at risk of overturning.
9
WARNING! Failure to comply with these instructions may result in damage to spreader or other property and/or personal injury.
2.
INTRODUCTION
i
Manufactured with a strong tubular steel frame and polyethylene dispensing hopper. Fitted with adjustable feed system to control feed quantities.
Designed to spread in a continuous line providing a more accurate application. Suitable for a variety of horticultural agents including grit, seed, salt,
fertilizer and weedkiller.
3.
SPECIFICATION
i
Model no: ..................................................................SPD27W
Capacity (Volume): ..............................................................25L
Capacity (Weight): .............................................................27kg
Dimensions (W x D x H): ........................... 740 x 810 x 775mm
Spread: ..........................................................................560mm
© Jack Sealey Limited
27KG WALK BEHIND DROP SPREADER
SPD27W
MODEL NO:
Original Language Version
SPD37W Issue 3 (H,2,3,F)
04/05/23

Advertisement

loading

Summary of Contents for Sealey SPD27W

  • Page 1 SPD27W MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 (20) over the cable and clamp it lightly in place using two M5 x 10 screws (3) and two M5 locknuts (6). 4.8. Referring to fig.8, push the index plate lever to the bottom of its travel and make sure that the distribution slots on the underside of the hopper are not covered by the rotating shutter. Now fully tighten the cable clamp. 4.9. Test the action of the lever to ensure that the rotating shutter successfully exposes and hides the distribution slots. 4.10. When the required distribution rate is achieved, the stop and wing nut fitted in the lever slot can be brought up to the bottom of the lever to fix its position. See fig.8. fig.8 fig.7 SPD37W Issue 3 (H,2,3,F) 04/05/23 Original Language Version © Jack Sealey Limited...
  • Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 sales@sealey.co.uk...