hit counter script

Cisco Nexus 9000 Series Configuration Manual page 26

Nx-os catena configuration guide, release 7.x
Hide thumbs Also See for Nexus 9000 Series:
Table of Contents

Advertisement

Configuring the Catena Solution
Configuration Examples of Catena Instances
vlan 20
catena port-group pg1
interface Eth1/2
catena port-group pg2
interface Eth1/4
catena ins_redirect
chain 10
10 access-list acl1 vlan-group vg1 egress-port-group pg1 mode forward
20 access-list acl1 vlan-group vg2 egress-port-group pg2 mode forward
no shutdown
catena ins_bypass
chain 10
10 access-list acl2 vlan-group vg1 egress-port-group pg1 mode bypass
no shutdown
catena ins_drop
chain 10
10 access-list acl3 vlan-group vg1 egress-port-group pg1 mode forward
20 access-list acl3 vlan-group vg2 egress-port-group pg2 mode drop
no shutdown
Configuring a catena instance in transparent mode PACL:
switch# configure terminal
switch(config)# feature catena
switch(config)# catena port-group pg1
switch(config-port-group)# interface Eth 1/1
switch(config-pg-node)# catena port-group pg2
switch(config-port-group)# interface Eth 1/2
switch(config-pg-node)# catena port-group pg3
switch(config-port-group)# interface Eth 1/3
switch(config-pg-node)# catena port-group pg4
switch(config-port-group)# interface Eth 1/4
switch(config-pg-node)# catena port-acl acl1
switch(config-port-acl)# 10 permit ip 192.0.2.1/24 any
switch(config-port-acl)# 20 deny ip 198.51.100.1/24 any
switch(config-port-acl)# catena ins_1
switch(config-catena-instance)# chain 10
switch(config-catena)# 10 access-list acl1 ingress-port-group pg1 egress port-group pg2
mode forward
switch(config-catena)# 20 access-list acl1 ingress-port-group pg3 egress port-group pg4
mode forward
switch(config-catena)# no shutdown
switch# show running-config catena
feature catena
catena port-acl acl1
10 permit ip 192.0.2.1/24 any
20 deny ip 198.51.100.1/24 any
catena port-group pg1
interface Eth1/1
catena port-group pg2
interface Eth1/2
catena port-group pg3
interface Eth1/3
catena port-group pg4
interface Eth1/4
catena ins1
chain 10
10 access-list acl1 ingress-port-group pg1 egress-port-group pg2 mode forward
20 access-list acl1 ingress-port-group pg3 egress-port-group pg4 mode forward
no shutdown
Configuring a catena instance for TCAM-based Load Balancing:
switch# configure terminal
switch(config)# feature catena
switch(config)# catena port-group pg1
switch(config-port-group)# interface Eth 1/2
switch(config-pg-node)# catena port-group pg2
switch(config-port-group)# interface Eth 1/4
switch(config-pg-node)# catena vlan-group vg1
switch(config-vlan-group)# vlan 10
switch(config-vlan-group)# catena vlan-group vg2
switch(config-vlan-group)# vlan 20
switch(config)# ip access-list acl1
Cisco Nexus 9000 Series NX-OS Catena Configuration Guide, Release 7.x
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents