Table of Contents
Advertisement
DRAM RAS# to CAS# Delay [6 DRAM Clocks]
Controls the latency between the DDR SDRAM active command and the
read/write command. Configuration options: [2 DRAM Clocks]
DRAM Clocks] [4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks]
DRAM RAS# Precharge [6 DRAM Clocks]
Controls the idle clocks after issuing a precharge command to the DDR
SDRAM. Configuration options: [2 DRAM Clocks] [3 DRAM Clocks]
[4 DRAM Clocks] [5 DRAM Clocks] [6 DRAM Clocks]
DRAM RAS# Activate to Precharge Delay [15 DRAM Clocks]
Configuration options: [4 DRAM Clocks] [5 DRAM Clocks] ~
Clocks]
Boot Graphic Adapter Priority [PCI/PEG]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Configuration
PEG Port [Auto]
Allows you to set or disable the PCI Express Graphic port.
Configuration options: [Auto] [Disabled]
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Force x1.Configuration options:
[Enabled] [Disabled]
SouthBridge Configuration
The SouthBridge Configuration menu allows you to change the Southbridge
related settings.
Advanced
South Bridge Chipset Configuration
USB Functions
PCIE Ports Configuration
PCI Express Port 0
PCI Express Port 4
PCI Express Port 5
v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.
ASUS TS300-E4
BIOS SETUP UTILITY
[4 USB Ports]
[Auto]
[Auto]
[Auto]
[15 DRAM
Options:
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
Select Screen
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
[3
5-23
Advertisement
Table of Contents
