Table of Contents
Advertisement
To install a floppy disk drive:
1.
Position the floppy drive vertically
with the eject button on the left side
(close to the HDDs).
2.
Connect the drive signal cable and
power cable.
3.
Carefully push the drive into the
bay until the drive cage fits the front
edge of the bay.
4.
Secure the drive cage with a screw.
ASUS TS300-E4
Floppy drive power cable
Floppy drive signal cable
Red stripe to match Pin 1 on the
connector
2-37
Advertisement
Table of Contents
