Advertisement
Quick Links
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
WARNING! Ensure health & safety, local authority, and general workshop practice regulations
are adhered to when using this equipment.
WARNING! Disconnect from air supply before changing accessories or servicing.
Maintain the needle scaler in good condition and replace any damaged or worn parts. Use
genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
Only use needles which are specifically designed for use with a needle scaler.
Wear approved safety eye/face shield, ear defenders, and hand protection.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and non essential persons away from the working area.
DO NOT use the needle scaler for a task it is not designed to perform.
WARNING! DO NOT use needle scaler if damaged or thought to be faulty. (Contact Sealey
service agent).
DO NOT use needle scaler unless you have been instructed in its use by a qualified person.
DO NOT carry the needle scaler by the air hose, or yank the hose from the air supply.
DO NOT operate needle scaler if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
DO NOT carry needle scaler with your hand on the power trigger in order to avoid unintentional
starting.
DO NOT direct air from the air hose at yourself or others.
When not in use disconnect from air supply and store in a safe, dry, childproof location.
2.
INTRODUCTION & SPECIFICATIONS
The SA51 is suitable for cleaning heavy paint and rust scale
from metal surfaces. It has a palm control trigger mechanism
and replaceable scaler needles.
Stroke . . . . . . . . . . . . . . . . . . . . . 32mm
Free speed . . . . . . . . . . . . . . . 4800bpm
Air consumption . . . . . . . . . . . . . . 3cfm
Noise Power . . . . . . . . . . . 104.82dB(A)
Noise Pressure. . . . . . . . . . 93.83dB(A)
Operating Pressure . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . . 1/4BSP
Weight . . . . . . . . . . . . . . . . . . . . . . 1kg
Vibration . . . . . . . . . . . . . . . . . 8.56m/s²
Uncertainty . . . . . . . . . . . . . . . 1.34m/s²
© Jack Sealey Limited
INSTRUCTIONS FOR:
AIR NEEDLE SCALER
MODEL No:
Original Language Version
SA51
SA51 Issue: 5(SP) - 20/09/13
Advertisement
Related Manuals for Sealey SA51
Summary of Contents for Sealey SA51
- Page 1 SA51 MODEL No: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
- Page 2 WARNING! Ensure you read, understand and apply safety instructions before use. 4.1. Remove the SA51 from the package. The tool should be assembled and ready to use. 4.2. Connect the needle scaler to the air hose as in chapter 3.
- Page 3 Replace the appropriate needles. Use only genuine Sealey needles. Screw the needle tube (19) onto the barrel sleeve (12) and tighten. 5.2. Lubricate the needle scaler daily with a few drops of Sealey air tool oil dripped into the air inlet. 5.3.