free stats

Advertisement

Quick Links

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
Wear eye
instructions
protection
1. Warning label locationS
© Jack sealey limited
instructions for
tyre changer - automatic
model no:
Wear protective
Wear safety
gloves
footwear
When clamping
the rim, Do not
place hand or
any other part
of the body
between the
clamping jaw and
the wheel rim.
Original Language Version
tc10
Wear protective
Wear ear
clothing
protection
electrical
crushing
shock
of hands
hazard
hazard
Do not stand
behind the
column
Do not put any
body part under
the tool head
Warning!
electricity
When bead
breaking the
blade moves
very quickly to
the left. the
operator should
not stand
between the
blade and
the tyre
tc10 | issue 1 02/02/18

Advertisement

Table of Contents
loading

Summary of Contents for Sealey TC10

  • Page 1 Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2: Electrical Safety

    (residual current device) is used with all electrical products.
  • Page 3: Specification

    Protects alloy wheels with the added feature of plastic protectors, fitted to the clamping jaws and mounting head. Supplied with 485mm tyre lever, integrated tyre inflator, tyre soap tub, air regulator and lubricator. Model No.TC10A Assist Arm is required for use with low profile and run flat tyres. See Sealey website for demonstration video. 4. SPecification model no ...............
  • Page 4 Remove the nut and washer at the one end of the rotational shaft assembly fig.3.1. Push the shaft through the bushes and fit the washer and tighten nut to a torque of 70nm. Original Language Version tc10 | issue 1 02/02/18 © Jack sealey limited...
  • Page 5 5.4.2. Use the screw provided to fix the assembly on the right hand side (viewed from the back) of the body fig.13. Original Language Version tc10 | issue 1 02/02/18 © Jack sealey limited...
  • Page 6 Place the tyre between the bead breaking blade and rubber tyre block. Position the bead breaking blade beside the lateral side of the tyre fig.19. Then operate the pedal to detach the rim from the tyre fig.2.10. Original Language Version tc10 | issue 1 02/02/18 © Jack sealey limited...
  • Page 7 5.1.6. Detach the other lip fig.25. Operate the column tilt pedal fig.2.8 and the column will tilt backwards allowing removal of the tyre. fig.25 Original Language Version tc10 | issue 1 02/02/18 © Jack sealey limited...
  • Page 8: Maintenance And Repair

    Original Language Version tc10 | issue 1 02/02/18 © Jack sealey limited...
  • Page 9: Environment Protection

    Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey group, Kempson Way, Suffolk business Park, bury St edmunds, Suffolk. iP32 7ar 01284 757500 01284 703534 sales@sealey.co.uk...

Table of Contents