Table of Contents
Advertisement
Press [Go]
LED
once
Toner
Toner
Drum
Drum
Paper
Paper
Ready
Ready
Toner
Drum
Paper
Ready
Press [Go]
Type of problem
twice
Detected irregular power
Toner
supply for more than 100
Drum
times.
Paper
Ready
Detected that supply
Toner
power is unstable. (less
Drum
than 100 times)
Paper
Ready
The center thermistor of the
Toner
fuser unit has not reached
Drum
the specified temperature
within the specified time
Paper
after it was heated normally
Ready
to the certain level.
The hardware detected a
temperature error through the
center thermistor or the side
thermistor of the fuser unit.
Some fuser unit errors
occurred at power-ON or upon
recovery from sleep mode.
After the error was
detected at the fuser unit,
power was turned ON
again and the error is
being checked. (If power is
turned OFF and ON after
error code 6901 occurred,
this code is displayed for
about 15 minutes.)
After the heat unit was
Toner
heated normally, the
Drum
center thermistor of the
fuser unit detected a
Paper
temperature lower than
Ready
the specified value.
The center thermistor of
Toner
the fuser unit detected a
Drum
temperature rise greater
than the specified value
Paper
within the specified time.
Ready
The center thermistor of
Toner
the fuser unit detected a
Drum
temperature fall greater
than the specified value
Paper
within the specified time.
Ready
2-31
Error
Refer
codes
to:
0900
2-36
6F00
2-44
0502
2-35
050A
2-35
6901
2-43
6902
2-43
0504
2-35
0505
2-35
0506
2-35
Confidential
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
