Table of Contents
Advertisement
Error message
Initial display
Jam Inside
Open the Front
Cover, pull out the
Drum Unit
completely and
remove the jammed
paper.
Jam MP Tray
Remove the
jammed paper from
MP Tray and press
Go.
Jam Rear
Open the Back
Cover and remove
the jammed paper,
then press Go.
Jam Tray 1
Remove the
jammed paper from
Tray 1.
Machine Error
-
F9
Manual Feed
Load #S paper.
Media
Reload correct
Mismatch
paper in MP Tray,
then press Go.
Reload correct
paper in Tray 1, then
press Go.
No Cartridge
Put the Toner
Cartridge back in.
No Drum Unit
Open the Front
Cover, then install
the Drum Unit.
No Paper
Reload paper in
Tray.
Scroll
After the registration rear sensor
detects paper pass, the eject
sensor does not detect paper
pass.
When the paper is fed from the
MP tray, after the MP paper
empty sensor detects paper
pass, the registration rear
sensor does not detect paper
pass after a set period of time.
After the registration rear sensor
detects the end of paper pass
and the specified period of time
has passed, the eject sensor
continues to detect paper pass.
When printing from the paper
tray, the registration front sensor
does not detect paper pass
within the specified time after
the T1 paper feed sensor
detected paper pass.
The spec code was not entered
correctly.
There is no paper set in the
manual feed slot on the manual
feed slot printing.
When printing from the MP tray,
paper type setting in the
machine does not match the
setting in the driver.
When printing from the paper
tray, paper type setting in the
machine does not match the
setting in the driver.
Toner cartridge could not
communicate with the cartridge
sensor.
Detected that the drum unit was
not set by detecting the
electrodes current.
Detected that there was no
paper set in all trays when
TrayAuto was selected for
printing.
2-22
Description
Error
Refer
codes
to:
7000
2-44
7200
2-45
7100
2-45
7302
2-46
F900
2-52
8C00
2-48
9201
2-48
9202
2-48
2500
2-37
6200
2-41
9309
2-50
Confidential
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
