Advertisement
Quick Links
thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
refer to
instruction
manual
1. SafEty
Always distribute the load evenly over the surface of the bed of the platform truck.
9
Do Not leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured.
8
Do Not use platform truck on uneven ground and do not run over kerbs or steps - use a ramp.
8
Do Not allow others to ride on the platform truck.
8
Do Not use the truck if any part is damaged, paying particular attention to the wheels. inspect it before use each time and replace
8
or repair damaged or worn parts immediately.
check tyre pressures on the platform truck on a regular basis.
9
Do Not over inflate the tyres. Recommended pressure is 25psi.
8
Do Not exceed maximum load capacity of 450kg.
8
Do Not allow children to play on, stand upon or climb on the cart.
8
Be mindful of the location of the handle it may fall from the upright position.
9
chock the wheels when loading and unloading the cart.
9
alWayS use caution when operating the platform truck. When moving it, proceed at a safe speed, especially at corners where there
9
could be a danger of the load shifting. extra care should be taken on inclined surfaces.
Do Not use the platform truck when you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Do Not store material on the platform truck for an extended period of time.
8
2. iNtroDuctioN
Heavy-duty rust resistant steel construction. smooth steering action for easy manoeuvrability with soft rubber gripped handle and pneumatic
wheels for easy transportation over the toughest terrain. All four sides drop down using locking pin function for easy loading. can also be used
as a flat bed for transporting oversized items. Fitted with additional removable storage tray for carrying smaller items. Suitable for a variety of
warehouse, office, garden and domestic applications.
3. SpEcificatioN
model No: ................................................................. cSt806
maximum load capacity: ............................................... 450kg
Wheel size: ......................................................Ø300 x 90mm
internal size (length x width x depth): .... 1120 x 560 x 300mm
Platform height: .......................................................... 390mm
overall height: ............................................................ 650mm
© Jack sealey limited
instructions for
platform truck 450kg capacity
cSt806
model no:
Original Language Version
cST806| Issue:3(L) 16/05/17
Advertisement
Related Manuals for Sealey CST806
Summary of Contents for Sealey CST806
- Page 1 Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 5.1. Remove the contents from the packaging and check them against the contents list, fig.1. Ensure that all the parts are there and not damaged. if there are any problems contact your sealey stockist. 5.2. BACK WHEEL BRACKET ASSEMBLY Refer to fig.2 and A and B on Parts List on back page 5.2.1.
- Page 3 FLAT PLATE ASSEMBLY See fig.6 and F, G and H on parts list on back page 5.6.1. Place the flat plate (19) between the front wheel bracket (3) and the turning bracket (6) using M8x20 bolts (26), nylon washer (20) and M8 lock nuts (30). Original Language Version cST806| Issue:3(L) 16/05/17 © Jack sealey limited...
- Page 4 Feed the handle/tow bar (14/7) through the plastic connecting sleeve, line up the holes in the sleeve and the handle (14) or tow bar (7) with the turning axle assembly (6), insert the pivot pin (34) and secure with the R pin (35). fig.8.1 Original Language Version cST806| Issue:3(L) 16/05/17 © Jack sealey limited...
- Page 5 Do Not over inflate them - recommended pressure is 25psi. 6.3. regularly clean and lightly lubricate all moving parts. 6.4. use genuine sealey parts to replace any worn or damaged items. 6.5. Do Not store material on the platform truck for extended periods of time. 6.6.
- Page 6 24 CST806.24 LOCK HANDLE SLEEVE CST806.06 TURNING AXLE ASS'Y 25 CST806.25 PLATFORM CST806.07 TOW BAR 26 CST806.26N HEX BOLT (M8x20) CST806.08N CLAMP 27 CST806.27 HEX BOLT (M8x25) CST806.09N SCREW (M5x16) 28 CST806.28 FLAT WASHER (12mm) 10 CST806.10 LEFT & RIGHT SIDE PANEL 29 CST806.29...