Advertisement
Quick Links
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear a face
instructions
shields
1. safety
1.1.
GeneraL safety
only use the sprayer for its intended purpose.
9
Familiarise yourself with the applications, limitations, and potential hazards of this product.
9
ensure containers cannot easily be knocked over during filling.
9
Always ensure good contact on the 12V battery.
9
Mark fluid containers with hazard labels to show their contents.
9
Keep any fluid containers in a well ventilated, lockable store, preferably outside the working area.
9
Keep children and unauthorised persons away from the working area, especially when the sprayer is in operation.
9
Keep the work area childproof by using padlocks and master switches.
9
Maintain the sprayer in top condition. Keep it clean for best and safest performance.
9
Follow the same precautions when transferring fluid from the sprayer back into other containers.
9
ensure the sprayer is securely fixed to the ATV.
9
Always inspect and prepare the sprayer before use according to the directions provided in this manual.
9
Keep the sprayer turned off. do not turn on power to the sprayer until ready to spray in order to avoid unintentional spray release.
9
never spray when wind speed exceeds 4mph in order to minimize spray drift.
8
do not over apply pesticide. Apply at a rate recommended by agents manufacturer. excess pesticide can be dangerous to humans,
8
damage desirable plants, and contaminate soil and water sources.
never point the spray gun at people or animals.
9
do not eat, drink, rub your eyes, or touch any part of your bare skin while handling agents and spraying.
8
do not spray near open flames or sources of heat.
8
Always clean up spills immediately per instructions on the agents label.
9
Turn off vehicle and set brake or block wheels, turn off power to sprayer, and relieve system pressure before leaving sprayer
9
unattended.
do not use an open flame or smoke anywhere near the sprayer or around stored fluid.
8
do not spray fluid into dedicated workshop oil spray equipment.
8
do not use any electrical equipment on or near the vehicle while fluid spraying is in progress. This includes the use of inspection
8
lights, mobile phones or pagers.
do not use the sprayer if the pump is damaged in any way.
8
do not use whilst under the influence of drugs, alcohol or other intoxicating medication, or if you are fatigued.
8
2. IntroductIon
Single broadcast lance provides a wide 4.3mtr spray pattern. Suitable for use with Model no. SS37. Supplied with polyvinyl hose and all
mounting equipment. Also suitable as replacement broadcast nozzle for Model no's SS60 and SS98.
3. specIfIcatIon
Model no: ..................................................................... SSA2
Application(s): .......................................... SS37, SS60, SS98
Maximum Spray Reach: ............................................... 4.3mtr
nett Weight: ................................................................0.24Kg
4. contents
Broadcast lance ................................................................ x1
Hose .................................................................................. x1
Broadcast Bracket .............................................................. x1
Broadcast nozzle ............................................................... x1
Hose Clamp ....................................................................... x2
Screw ................................................................................. x2
© Jack Sealey limited
Broadcast Lance
Model no:
Wear protective
Wear protective
gloves
clothing
Original Language Version
ssa2
SSA2 Issue 3 (HF) 06/11/18
Advertisement
Related Manuals for Sealey SSA2
Summary of Contents for Sealey SSA2
- Page 1 Model no: thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 5.3.4. Slide the hose clamp around the hose barbs and tighten. note! refer to the manual for ss37 for the rest of the assembly procedure and preparation. fig.3 Original Language Version SSA2 Issue 3 (HF) 06/11/18 © Jack Sealey limited...
- Page 3 3. Replace spray gun nozzle. nozzle Pump 1. leak in the 1. Find leak and tighten hose operates while system clamps or fittings. not spraying. Replace spray gun. Original Language Version SSA2 Issue 3 (HF) 06/11/18 © Jack Sealey limited...
- Page 4 Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. sealey Group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk...