Advertisement
Table of Contents
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! THIS MACHINE MAY CAUSE SERIOUS INJURIES. Read the instructions carefully for handling, preparing,
‰
maintaining, starting, stopping and operating the machine. Learn about all the controls and proper use of the machine.
WARNING! When using this type of tool, basic precautions should always be followed to reduce the risk of fire, electric shock and
‰
injury.
Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operations
9
described in these operating instructions.
This product must be operated only by experienced users.
9
If you are giving this machine to others, please also provide them with this instructions manual.
9
Use this machine as described in this instruction manual. It is strictly forbidden to use this tool for applications other than those
9
described in this manual.
Failure to follow these instructions can result serious injuries or death.
9
Never let people unfamiliar with these instructions or children use this product.
9
Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property.
9
DO NOT use the tool if you have consumed alcohol, are tired, under the influence of drugs or ill. DO NOT use the tool if you are not
8
in an adequate physical condition.
This tool is intended for outdoor use. Never use it indoors.
9
Never allow children use the machine.
9
Dress properly! DO NOT wear loose fitting clothing or jewellery that can be caught in moving parts. Use of resistant gloves, non-slip
9
shoes and safety glasses is recommended; stop the engine or disconnect it before:
cleaning or clearing a blockage;
checking, maintaining, or working on the machine;
when adjusting the working position of the cutting device.
Never add fuel to a machine with a running engine or when it's hot. DO NOT inhale fuel fumes as they are toxic.
9
Always inspect the machine before and after operation.
9
DO NOT attempt to repair the machine unless you are qualified to do so. Repairs should be carried out only by an authorized service
8
centre or a similar qualified specialist.
DO NOT use the machine with a damaged or excessively worn cutting device.
8
To reduce the risk of fire, keep the engine and exhaust free from debris, leaves or excessive lubricant.
9
Always make sure that all handles and guards are installed when operating the machine.
9
Never attempt to use an incomplete machine or a machine equipped with an unauthorized modification.
9
When transporting or storing the machine, always original packaging for device protection.
9
Always be aware of your environment and pay attention to possible dangers that cannot be heard due to the noise of the machine.
9
Keep people and animals away from the work area. Children and people who do not know how to use this tool should not touch it
9
and handle it.
Use the product only under daylight or under good artificial light.
9
When using the machine, always wear full protective equipment including a helmet, protective mask, ear protection, gloves, non-slip
9
footwear and protective clothing.
Wear appropriate clothing. DO NOT wear loose or unbuttoned shirts. DO NOT wear jewellery that may come in contact with moving
9
parts. If you have long hair, tie them down and wear an appropriate safety helmet.
DO NOT operate the product with damaged guards or shields not in place.
8
Keep hands and feet away from the unit at all times, especially when turning the tool off and on.
9
DO NOT use the tool in an area where ventilation is poor. Gas emissions can cause injury.
8
DO NOT use the tool when it's raining or during bad weather. DO NOT use the tool in damp locations.
8
DO NOT use the tool in the presence of flammable liquids or gases.
8
WARNING! The machine releases gases when it is used. Avoid coming into contact with these gases.
‰
Keep the work area clear. Before working, inspect the work area and remove any materials or objects that could cause accidents.
9
Survey the area to be worked prior to starting to avoid hitting underground services i.e. electricity cables, phone lines etc.
9
Keep the tool and drill clean for better and safer performance. Follow the instructions in this manual to lubricate and change the
9
accessories.
Turn off the tool after use, when you leave it unattended, when changing the accessories and before servicing.
9
© Jack Sealey Limited
2-STROKE PETROL EARTH AUGER
PHA100
MODEL NO:
Wear ear
Wear protective
protection
gloves
Original Language Version
Wear safety
Wear protective
footwear
clothing
Hot surfaces
Warning:
Flammable liquid
PHA100
Issue 2 (3,4)
17/09/21
Advertisement
Table of Contents
Related Manuals for Sealey PHA100
Summary of Contents for Sealey PHA100
- Page 1 PHA100 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
-
Page 2: Specification
Three different diameter bore sizes - 100, 150 or 200mm. Twin ergonomic handles for comfort and ease of use (by one or two people). Auger brake automatically stops the bit from turning if hard underground impediment is hit. 3. SPECIFICATION MODEL NO: ............PHA100 Engine Capacity: ............52cc Engine Type: ....Single Cylinder Air Cooled 2-Stroke Fuel Consumption: ........ - Page 3 Allow engine to warm up for a few minutes before using. 4.8.1.7. Depress the safety switch then squeeze the throttle trigger to start the operation (fig.2, fig.6). See Section 4.9 for instructions. Safety Switch Fig.3 Fig.2 PHA100 Issue 2 (3,4) 17/09/21 Original Language Version © Jack Sealey Limited...
-
Page 4: Warm Starting
You have to release the accelerator and return to idle to enable auger withdrawal. 4.11.3. In case of failure, stop the machine completely. Check the machine and have it inspected and repaired by a qualified service technician. PHA100 Issue 2 (3,4) 17/09/21 Original Language Version © Jack Sealey Limited... -
Page 5: Maintenance
Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...