Table of Contents
Advertisement
Figure 45. Installing the BBU into the BBU cage
Next steps
1.
Install the BBU
module.
Control panel
The control panel allows you to manually control the inputs to the sled.
Removing the control panel
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the
drives.
4.
Remove the drive
cage.
Steps
1. Pull the blue strap to disconnect the control panel cable connected to the system board.
2. Using a Phillips #1 screwdriver, remove the screws that secure the control panel to the system.
3. Slide the control panel out of the system.
42
Installing and removing system components
Safety
Instructions.
Before working inside the
sled.
Advertisement
Table of Contents
