Canon imageCLASS MF5770 Facsimile Manual
Canon imageclass mf5770: setup instruction
Hide thumbs
Also See for imageCLASS MF5770:
- Product manual (91 pages) ,
- Remote ui manual (49 pages) ,
- User manual (8 pages)
Advertisement
Quick Links
Thank you for purchasing Canon imageCLASS MF5770.
To get your machine ready for use, please follow the instructions in this document before referring to any other documentation.
Unpack the machine and its components.
Check that you have the following:
●
Machine
Cartridge
●
●
Power cord
USB cable
●
Telephone line cord
●
●
Destination labels
●
Set-Up Instructions
NOTE
The cartridge included with the machine is Cartridge X25 that yields approximately 2,500 pages of printouts (Letter at 4%
●
dot coverage).
Set-Up Instructions
Set-Up Instructions
for the Machine
Cassette extension
●
Extension cover
●
●
Basic Guide
●
Facsimile Guide
Warranty
●
Limited Warranty Note for Cartridge X25
●
●
Registration Card
●
MF5700 Series User Software CD-ROM
Advertisement
Related Manuals for Canon imageCLASS MF5770
Summary of Contents for Canon imageCLASS MF5770
- Page 1 Set-Up Instructions Set-Up Instructions for the Machine Thank you for purchasing Canon imageCLASS MF5770. To get your machine ready for use, please follow the instructions in this document before referring to any other documentation. Unpack the machine and its components.
-
Page 2: Install The Cartridge
Before setting up the machine: 1 Place the machine on a flat, stable surface. 2 Remove all shipping tape from the exterior of the machine. Referring to the following figure, remove the tape and spacers on both sides of the cassette housed in the machine. - Page 3 5 Hold the cartridge so that the instructions (A) and the arrow (B) are facing up, and insert it in the machine horizontally as far as it will go. Assemble the cassette and load paper. 1 Hold the document feeder (A) with one hand, and open the document feeder tray (B) with the other.
- Page 4 3 Attach the extension to the cassette. The slots ➊ are keyed and must be inserted at a 90° angle. Once inserted, fold the extension as shown ➋. To load Legal-size paper: ➊ Pull the blue tab and extend the cassette size mark.
- Page 5 7 Even out the edges of the paper stack. Make sure the height of the stack does not exceed the limit marks the side edges of the stack are below the hooks (B). 9 Insert the tabs on the extension cover into the ➊...
-
Page 6: Connect The Power Cord
Connect the telephone cable and any necessary external device. Connect the telephone cable to the wall jack. You can connect an external device if necessary (optional). Connect the power cord. Plug the power cord into the rear socket ➊. Then connect the other end to the wall outlet ➋. Once it is warmed up, the standby display appears in the LCD. -
Page 7: Set The Receive Mode
Set the receive mode Press [Menu]➊. Press [ (–)] or [ (+)]➋ <FAX SETTINGS> → press [Set] Press [ (–)] or [ (+)]➋ <RECEIVE MODE> → press [Set] Press [ (–)] or [ (+)]➋ receive mode → press [Set] You can select from the following: ●... - Page 8 U.S.A. CUSTOMERS CANADA CUSTOMERS Part no.FA7-7063 (010) ©2005 Canon Inc. Canon and imageCLASS are trademarks of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. PRINTED IN CHINA...