Table of Contents
Advertisement
5. Install the
coin-cell
battery.
6. Install the battery.
7. Install the
solid-state drive in M.2 slot
8. Install the
solid-state drive in M.2 slot
9. Install the
WLAN
card.
10. Install the
memory
module.
11. Install the
base
cover.
12. Follow the procedure in
Power button with fingerprint reader
Removing the power button with fingerprint reader
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
memory
module.
4. Remove the
WLAN
card.
5. Remove the
solid-state drive in M.2 slot
6. Remove the
solid-state drive in M.2 slot
7. Remove the battery.
8. Remove the
coin-cell
9. Remove the
left
fan.
10. Remove the
right
fan.
11. Remove the
heat
sink.
12. Remove the
power-adapter
13. Remove the
system
board.
NOTE:
The system board can be removed along with the heat sink.
Steps
1. Locate the power button with fingerprint reader on your computer.
52
Removing and installing components
two.
one.
After working inside your
Before working inside your
one.
two.
battery.
port.
computer.
computer.
Advertisement
Table of Contents
