Speaker
•
Removing the speaker
•
Replacing the speaker
Removing the Speaker
CAUTION:
Before you perform this procedure, see
For You and Your
Computer."
NOTICE:
Before disconnecting a device from the computer or removing a
component from the system board, verify that the standby power light on the
system board has turned off. To locate this light, see
Components."
Turn off the computer and devices, disconnect them from their
1
electrical outlets, wait at least 10 to 20 seconds, lay the computer on its
right side, and
open the computer
Disconnect the speaker cable from the
2
Disconnect the speaker cable from the securing clip in the chassis (see
3
the following figure).
"Safety First—
"System Board
cover.
I/O
connector.
101