Removing And Replacing The Computer Covers; Removing The Computer Covers; Figure 7-1. Keylocks On The Computer's Back Panel - Dell PowerEdge 4200 Installation And Troubleshooting Manual
Dell poweredge 4200 servers: install guide
Hide thumbs
Also See for PowerEdge 4200:
- User manual (132 pages) ,
- Solution manual (114 pages) ,
- Service manual (96 pages)
Table of Contents
Advertisement
In addition, Dell recommends that you periodically
review the safety instructions at the front of this guide.
R
emoving and Replacing the
Computer Covers
To troubleshoot problems inside the computer, you need
to remove one or both of the computer covers.
Removing the Computer Covers
Use the following procedure to remove the computer
covers:
1.
Observe the precautions in "Safety First—For
You and the Computer" found earlier in this
chapter. Also observe the safety instructions at
the front of this guide.
7-2
Dell PowerEdge 4200 Systems Installation and Troubleshooting Guide
2.
Turn the cover's keylocks on the back panel of the
computer (see Figure 7-1) to the unlocked
position.
Figure 7-1. Keylocks on the Computer's
Back Panel
3.
Loosen the three screws along the back edge of
the side cover (see Figure 7-2).
4.
Slide the cover an inch or so toward the back of
the computer, grasp the top of the cover at both
ends, and lift it straight away from the chassis.
Advertisement
Chapters
Table of Contents
Troubleshooting
