Related Manuals for Asus AAEON BOXER-8250AI
Summary of Contents for Asus AAEON BOXER-8250AI
- Page 1 BOXER-8250AI Compact Fanless Embedded AI@Edge Box PC with NVIDIA® Jetson Xavier™ NX User’s Manual 1 Last Updated: September 8, 2020...
- Page 2 Copyright Notice This document is copyrighted, 2020. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
- Page 3 Acknowledgements All other products’ name or trademarks are properties of their respective owners. NVIDIA®, the NVIDIA logo, Jetson™ and Jetson Xavier™ are trademarks of the ⚫ NVIDIA Corporation ITE is a trademark of Integrated Technology Express, Inc. ⚫ IBM and VGA are trademarks of International Business Machines Corporation. ⚫...
- Page 4 Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity BOXER-8250AI ⚫ Power Connector ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
- Page 5 About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
- Page 6 Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. All cables and adapters supplied by AAEON are certified and in accordance with the material safety laws and regulations of the country of sale.
- Page 7 As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers. If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii.
- Page 8 FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
- Page 9 China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON System QO4-381 Rev.A0 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯 醚(PBDE) (Pb) (Hg) (Cd) (Cr(VI)) (PBB) 印刷电路板 × ○ ○ ○ ○ ○ 及其电子组件 外部信号 × ○ ○ ○ ○ ○ 连接器及线材 外壳 ○...
- Page 10 China RoHS Requirement (EN) Hazardous and Toxic Materials List AAEON System QO4-381 Rev.A0 Hazardous or Toxic Materials or Elements Component Name PCB and Components Wires & Connectors for Ext.Connections Chassis CPU & RAM HDD Drive LCD Module Optical Drive Touch Control Module Battery This form is prepared in compliance with the provisions of SJ/T 11364.
-
Page 11: Table Of Contents
Table of Contents Chapter 1 - Product Specifications..................1 Specifications ......................2 Product Notice ......................4 Chapter 2 – Hardware Information ..................5 Dimensions ....................... 6 Jumpers and connectors..................7 List of Jumpers ......................8 2.3.1 Setting Jumpers ..................8 2.3.2 AT/ATX Mode Select (CN14 Pins 7-8) .......... -
Page 12: Chapter 1 - Product Specifications
Chapter 1 Chapter 1 - Product Specifications... -
Page 13: Specifications
Specifications System 6-core NVIDIA Carmel ARM® v8.2 64-bit CP Chipset — System Memory 8GB LPDDR4x AI Solution Nvidia Jetson Xavier NX Display Interface HDMI 2.0 Storage Device 16GB eMMC 5.1 and MicroSD card slot Ethernet 10/100/1000Base-TX x 5 USB 3.2 Gen 1 x 4 LAN x 5 RS-232 x 2 HDMI x 1... - Page 14 Mechanical Mounting Wall-mount Dimensions (W x D x H) 6.92” x 3.94” x 1.54” (175.8 mm x 100.0 mm x 39.0 mm) Gross Weight 2.48 lbs. (1.12 kg) Net Weight 1.46 lbs. (0.66 kg) Environmental Operating Temperature 14°F ~ 149°F (-10°C ~ 65°C, according to IEC60068-2 with 0.5 m/s airflow) Storage Temperature -40°F ~ 176°F (-40°C ~ 80°C)
-
Page 15: Product Notice
Product Notice Micro-USB: Micro-USB port is ideally for flashing image only. USB ports: USB ports do not support USB DVD ROM because of file system. USB 3.2 Gen 1: USB 3.2 Gen 1 is the current name for 5Gbps specification, formerly USB 3.0. -
Page 16: Chapter 2 - Hardware Information
Chapter 2 Chapter 2 – Hardware Information... -
Page 17: Dimensions
Dimensions Chapter 2 – Hardware Information... -
Page 18: Jumpers And Connectors
Jumpers and connectors Chapter 2 – Hardware Information... -
Page 19: List Of Jumpers
List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers Label Function CN14 (Pin 7-8) AT/ATX mode select 2.3.1 Setting Jumpers You can configure your system to match the needs of your application by setting... -
Page 20: At/Atx Mode Select (Cn14 Pins 7-8)
2.3.2 AT/ATX Mode Select (CN14 Pins 7-8) The AT/ATX Mode Select functions by connecting pins 7 and 8 of CN14. To prevent damage to the system, do not connect pins 7 and 8 to any other pin. Open – AT Mode Closed –... -
Page 21: List Of Connectors
List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each of the board's connectors Label Function DC Power In connector Jetson Xavier NX Giga LAN Connector I210AT Giga LAN Connector I210AT Giga LAN Connector I210AT Giga LAN Connector... -
Page 22: Dc Power In Connector (Cn1)
2.4.1 DC Power In Connector (CN1) Signal Signal PWR IN 2.4.2 LAN RJ45 Port (CN2—CN6) Signal Signal MDI0+ MDI0- MDI1+ MDI1- MDI2+ MDI2- MDI3+ MDI3- Note: CN2 is the Jetson Xavier Gigabit LAN port. Ports CN3, CN4, CN5, and CN6 are I210AT Gigabit LAN Ports. -
Page 23: Usb 2.0 Connector For Flash Image (Cn7)
2.4.3 USB 2.0 Connector for Flash Image (CN7) Signal Signal USB1- USB1+ Chapter 2 – Hardware Information... -
Page 24: Jetson Xavier Nx Cpu Module Connector (Cn11)
2.4.4 Jetson Xavier NX CPU Module Connector (CN11) Chapter 2 – Hardware Information... - Page 25 Chapter 2 – Hardware Information...
-
Page 26: Rtc Battery Connector (Cn13)
2.4.5 RTC Battery Connector (CN13) Signal Signal 2.4.6 Front Panel Connector (CN14) Signal Signal Button power Recovery Reset Latch set Latch set PWR LED Note: Pin 7 and 8 are used for setting AT/ATX Power Mode. See Chapter 2.3.2 for information. -
Page 27: Hdmi Connector (Cn16)
2.4.7 HDMI Connector (CN16) Signal Signal HDMI_DATA2_P HDMI_DATA2_N HDMI_DATA1_P HDMI_DATA1_N HDMI_DATA0_P HDMI_DATA0_N HDMI_CLK_P HDMI_CLK_N HDMI_SCL HDMI_SDA HDMI_PWR HDMI_HDP Chapter 2 – Hardware Information... -
Page 28: Usb 3.0 Connector (Cn17/18)
2.4.8 USB 3.0 Connector (CN17/18) Signal Signal VBUS_1 VBUS_2 (A)D- (B)D- (A)D+ (B)D+ (A)SSRX- (B)SSRX- (A)SSRX+ (B)SSRX+ (A)SSTX- (B)SSTX- (A)SSTX+ (B)SSTX+ Chapter 2 – Hardware Information... -
Page 29: Com Port Connector (Cn19/20)
2.4.9 COM Port Connector (CN19/20) RS-232 UART UART RXD UART TXD Note: When using UART mode, RS-232 Receiver U21, U22 must be removed. Chapter 2 – Hardware Information... -
Page 30: Hardware Assembly
Hardware Assembly Chapter 2 – Hardware Information... -
Page 31: Chapter 3 - Os Flash Guide
Chapter 3 Chapter 3 – OS Flash Guide... -
Page 32: Before Installation
Before Installation Before starting the process make sure your BOXER-8250AI system is turned off and the power in is disconnected. You will need a host PC running Ubuntu 16.04 or 18.04, and make sure the NVIDIA Jetson Xavier NX module is installed onto the BOXER-8250AI carrier board/ system. -
Page 33: Connecting To Pc/Force Recovery Mode
Connecting to PC/Force Recovery Mode On Host Computer, open Linux terminal and enter the following command to extract compressed OS image files (file name may vary): $ tar -zxvf ACLinux_4.9_ACLNX49D.NV05.BOXER-8250AI.2.tar.gz Next, perform the following steps to force the system to start in USB Recovery Mode: Connect the Micro-USB plug on the USB cable to the Recovery Port on the BOXER-8250AI and the other end to an available USB port on the host PC. -
Page 34: Flash Image To Board
Flash Image to Board Use the following steps to flash the OS to the BOXER-8250AI. Open terminal on Ubuntu host PC, then access the bootloader folder you extracted in the previous section. Enter the following command in terminal to flash the image: $ sudo ./flashall.sh Wait as the image is installed.