Paper-Related Settings - Canon TX-3000 Online Manual

Hide thumbs Also See for TX-3000:

Table of Contents

Paper-related settings

Select this setting item from Device settings.

• Roll paper auto feed

Enables/disables feeding roll paper automatically when you load it on the roll unit.

Selecting Enable detects the paper edge automatically and paper is loaded automatically only by

putting roll paper on the roll unit.

Select Disable if you load roll paper manually, or if you have any problem in feeding roll paper

automatically.

• Keep media type

Select Enable to keep using the same type of paper.

• Manage remaining roll amount

Selects the method to manage remaining roll amount and that to display warning when the roll is

running short.

Manages remaining roll amount by using a barcode.

By using the barcode every time you replace a roll, you can manage remaining roll amount properly.

Specify the roll length properly when you load a new roll.

◦ Warning message

Estimates remaining roll amount by using media type and roll diameter information. A warning

appears when remaining roll amount comes closer to the specified value.

Depending on the environment you are using the printer, selecting this setting may not manage

remaining roll amount as precisely as you expected. We recommend you select a higher value for

this setting item.

Select to disable managing remaining roll amount.

• Roll amount warning setting

Specifies when to warn the remaining roll paper amount.

• Switch roll paper when low

Switches the roll paper for printing automatically when the roll is running out while printing is in progress.

This setting is valid only when Barcodes is selected for Manage remaining roll amount.

The roll paper for printing is switched with several rolls remaining.

Switches the roll paper for printing by estimating the remaining amount based on the roll amount

value you entered.

To switch the roll, several rolls need to remain in the roll.

Show Quick Links

Table of Contents