Canon TX-3000 Online Manual page 587

Hide thumbs Also See for TX-3000:

Table of Contents

• If the Borderless Extension slide bar is set to the far right position, the back of the paper may

come out stained.

6. Complete setting process

Click Print.

If you print now, the document will be printed by filling in the entire surface of the paper.

• The available paper sizes for Borderless Printing are pre-determined. From Paper Size, select the

paper displayed as "Borderless."

• If you want to print borderless using a custom paper size, create a custom paper size by choosing

Paper Size, Manage Custom Sizes..., and setting all Non-Printable Area values to 0 mm. Next,

choose Page Processing, Fit Roll Paper Width and select On (Borderless).

• If you try to set borderless printing, in Page Processing, Banner Printing and Print Centered will be

displayed in gray and you will not be able to configure them.

• Depending on paper size, the length/width ratio of the paper may be different from that of the image,

making it impossible for the whole image to fit on the paper.

When this happens, crop the image with the application software to match paper size.

• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color

unevenness on the edges of the paper. If you require particularly high quality, under Page Processing,

Automatic Cutting, select None. When you do so, the document will be printed without the left and

right margins. After the printed material has exited the printer and has been cut, cut the upper and lower

edges with a pair of scissors.

• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the

cutter unit may come into contact with the paper surface scratching it and causing the paper to be

unevenly cut.

Show Quick Links

Table of Contents

Troubleshooting