Related Manuals for NEC MultiSync X651UHD-2
Summary of Contents for NEC MultiSync X651UHD-2
- Page 1 Large Format Display User’s Manual MultiSync X551UHD MultiSync X651UHD-2 Please fi nd your model name in the label on the backside of monitor.
-
Page 2: Table Of Contents
Index DECLARATION OF CONFORMITY ......................English-1 Important Information ........................... English-2 WARNING ............................English-2 CAUTION ............................English-2 Safety Precautions, Maintenance & Recommended Use................English-3 Safety Precautions and Maintenance ..................... English-3 Recommended Use ........................English-3 Ergonomics ............................. English-3 Cleaning the LCD Panel ......................... English-3 Cleaning the Cabinet ........................ -
Page 3: Declaration Of Conformity
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation. OmniColor is a registered trademark of NEC Display Solutions Europe GmbH in the countries of EU and Switzerland. DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association. -
Page 4: Important Information
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. -
Page 5: Safety Precautions, Maintenance & Recommended Use
• Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. • The screen of the coaxial cable is intended to be connected to earth in the building installation. -
Page 6: Contents
Contents Your new MultiSync monitor box* should contain the following: • LCD monitor • Clamp x 1 (X651UHD-2), x 3 (X551UHD) • Power cord* • Screw with washer (M4 x 10) x 1 (X651UHD-2), x 3 (X551UHD) • Video Signal Cable (DisplayPort cable) •... -
Page 7: Installation
For landscape position: • When using mounting accessories other than those that are NEC approved, they must comply with the VESA- compatible (FDMlv1) mounting method. • NEC recommends mounting interfaces that comply with UL1678 standard in North America. -
Page 8: Attaching Mounting Accessories
• Be sure the unit is mounted to a solid structure within When using mounting accessories other than NEC compliant the ceiling, such as a support beam. Secure the monitor and approved, they must comply with the VESA-compatible using bolts, spring lock washers, washer and nut. - Page 9 3. Using Option Board 5. Ventilation Requirements 1. Turn off the main power switch. When mounting in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure 2. Remove the attached slot cover by unscrewing the to allow heat to disperse, as shown below.
-
Page 10: Parts Name And Functions
Parts Name and Functions Control Panel ³ º POWER button ( EXIT button (EXIT) Switches the power on/off. See also page 16. Activates the OSD menu when the OSD menu is turned off. Acts as EXIT button within the OSD to move to previous ·... -
Page 11: Terminal Panel
Terminal Panel (X651UHD-2) (X551UHD) ³ ¸ AC IN connector Internal speaker ¹ Connects with the supplied power cord. Internal/External speaker switch · : Internal speaker : External speaker. Main Power Switch NOTE: Please power off the monitor when you use the On/Off switch to turn main power ON/OFF. -
Page 12: Wireless Remote Control
Wireless Remote Control º MENU button Turns on/off the menu mode. ¾ ACTIVE PICTURE button Selects active picture. µ EXIT button Returns to previous menu within OSD menu. ¸ UP/DOWN button ( / ) Acts as button to move the highlighted area up or down to select adjustment items within OSD menu. -
Page 13: Operating Range For The Remote Control
Operating Range for the Remote MULTI PICTURE button ON/OFF button: Toggle switches between ON and OFF. Control See page 17. Points the top of the remote control toward the LCD monitor’s MODE button: Selects picture number and a mode from PIP, remote sensor during button operation. -
Page 14: Setup
Setup 1. Determine the installation location NEC recommends the following battery use: • Place “AAA” size batteries matching the (+) and (-) signs CAUTION: Installing your LCD monitor must be done by a on each battery to the (+) and (-) signs of the battery qualifi... - Page 15 5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer fi rst. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required.
-
Page 16: Connections
Connections NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. Before making connections: First turn off the power of all the attached equipment and make connections. -
Page 17: Connecting A Personal Computer
Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some display cards may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing signal automatically. <Typical factory preset signal timing>... -
Page 18: Basic Operation
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NOTE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button. -
Page 19: Power Indicator
Power Indicator Aspect DVI1, DVI2, DPORT, OPTION* , PRESET1* , PRESET2* Mode Status Indicator Light FULL ZOOM NORMAL Power ON Green* Power OFF and Power Save “AUTO STANDBY” HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* , PRESET2* Power consumption under 0.5 W* FULL WIDE DYNAMIC... -
Page 20: Input Configuration
INPUT CONFIGURATION You can display 3840 x 2160 60 Hz image by using multiple input signals. Selects input sources. Depending on the setting at HDMI/DVI SELECT, the selection of INPUT CONFIGURATION is changed. HDMI/DVI SELECT INPUT CONFIGURATION HDMIx4 (PRESET1) HDMIx2 (PRESET1) HDMIx2 (PRESET2) HDMI HDMIx2 (PRESET1) -
Page 21: Picture Mode
Native display color gamut. Suitable for use with color managed applications. DICOM SIM. Setting that conforms to the DICOM standard for the Grayscale Standard Display Function. PROGRAMMABLE For “MultiProfi ler” software or the Hardware Calibration settings by NEC Display Solutions software (some OSD settings are disabled). MODE PURPOSE LUMINANCE Adjusts the overall image and screen background brightness. - Page 22 - When the selected PICTURE MODE is different from your computer’s ICC color profi le, you may experience inaccurate color reproduction. - MultiProfi ler software, developed by NEC Display Solutions, is highly recommended to provide extended color management features such as ICC profi le Emulation and Printer Emulation. The latest MultiProfi ler software is available on the NEC Display Solutions website.
- Page 23 SPECTRAVIEW ENGINE is “OFF”: Selects fi ve picture modes by Picture mode in OSD menu or using Picture mode button on the wireless remote control. DVI1, DVI2, DPORT, OPTION*, PRESET1* , PRESET2* STANDARD sRGB CUSTOM1 CUSTOM2 HIGHBRIGHT HDMI1, HDMI2, HDMI3, HDMI4, PRESET1* , PRESET2* STANDARD CINEMA...
-
Page 24: Osd (On-Screen-Display) Controls
OSD (On-Screen-Display) Controls NOTE: Some functions may not be available depending on the model or optional equipment. Input source Main Menu Icons Main Menu Item Adjustment Settings Sub Menu THANK YOU FOR SAVING PICTURE MODE THE ENVIRONMENT. CARBON FOOTPRINT 86.0 % Select Goto Adjustment Return... -
Page 25: Picture
Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of the image (S-Curve). DICOM SIM. DICOM GSDF curve simulated for LCD type. PROGRAMMABLE1, 2, 3 A programmable gamma curve can be loaded using NEC optional software. UHD UPSCALING* Achieves high-defi nition effect. PICTURE MODE... -
Page 26: Audio
ZOOM The image can be expanded/reduced. NOTE: The expanded image which is outside of active display area is not shown. The reduced image may have some image degradation. ZOOM Maintains the aspect ratio while zooming. HZOOM Amount of horizontal zoom. VZOOM Amount of vertical zoom. -
Page 27: Multi Picture Control
DATE & TIME Sets the date, time, and daylight saving region. Date & time must be set in order for the “SCHEDULE” function to operate. See page 32. YEAR Confi gures the year for the real-time clock. MONTH Confi gures the month for the real-time clock. Confi... -
Page 28: Osd
TEXT TICKER* MODE Enables Text Ticker and allows you to set Horizontal or Vertical direction. POSITION Selects the location of the Text Ticker on the screen. SIZE Determines the size of the Text Ticker in relationship to the overall screen size. DETECT Enables auto-detection of the Text Ticker. -
Page 29: Multi Display
MULTI DISPLAY ID CONTROL Sets the monitor ID number from 1-100 and group ID from A-J. DETECTED MONITORS shows the number of all monitors which follow in the chain with LAN. NOTE: Group ID is made of multiple selections. AUTO ID When “YES”... -
Page 30: External Control
HEAT STATUS Displays status of the FAN, BACKLIGHT and TEMPERATURE. FAN CONTROL Cooling fan reduces the temperature of the display to protect from overheating. AUTO, HIGH If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed. SCREEN SAVER Use the SCREEN SAVER function to reduce the risk of Image Persistence. -
Page 31: Advanced Option1
ADVANCED OPTION1 INPUT DETECT Selects the method of input detection the monitor uses when more than two input devices are NONE connected. NOTE: When SUPER is selected in INPUT CHANGE, this function cannot be changed. NONE The Monitor will not search the other video input ports. FIRST DETECT* When the current video input signal is not present, then the monitor searches for a video signal from the other video input port. - Page 32 DEINTERLACE Selects the IP (Interlace to Progressive) conversion function. NOTE: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu. Converts interlaced signals to progressive. This is the default setting. Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of image retention.
-
Page 33: Advanced Option2
ADVANCED OPTION2 AUTO DIMMING* Adjusts the backlight of the LCD automatically depending on the amount of ambient light. AUTO BRIGHTNESS Adjusts the brightness level according to the input signal. DVI1, DVI2, DPORT, OPTION* NOTE: Do not select this function when ROOM LIGHT SENSING is MODE1 or MODE2. PRESET* , PRESET2* inputs only. - Page 34 As with all personal display devices, NEC DISPLAY SOLUTIONS recommends displaying moving images and using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
-
Page 35: Remote Control Function
Remote Control Function REMOTE CONTROL ID FUNCTION Monitor ID:1 Monitor ID:2 Monitor ID:3 REMOTE CONTROL ID The remote control can be used to control up to 100 individual MultiSync monitors using Remote works Remote works Remote works what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. -
Page 36: Multiple Monitors Connection
Multiple Monitors Connection You can control multiple monitors by using RS-232C, REMOTE IN or LAN daisy-chain connection. NOTE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specifi ed ID number, please execute AUTO ID (see page 27) previously. -
Page 37: Controlling The Lcd Monitor Via Rs-232C Remote Control
Controlling the LCD monitor via RS-232C Remote Control This LCD monitor can be controlled by connecting a personal computer with a RS-232C (reverse type) terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF. •... - Page 38 3) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 73 0d Power OFF 01 30 41 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 76 0d 01 30 41 30 45 30 41 02 30 30 36 30 30 30 30 46 03 04 0d...
-
Page 39: Controlling The Lcd Monitor Via Lan Control
Controlling the LCD monitor via LAN Control Connecting to a Network Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. To use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server NOTE: Use a category 5 or higher LAN cable. - Page 40 Example 1: When the host name of the monitor has been set to “pd.nec.co.jp”, access is gained to the network setting by specifying http://pd.nec.co.jp/index.html for the address or the entry column of the URL.
- Page 41 Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set for IP ADDRESS setting. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor. NOTE: Consult your network administrator for the IP address when [AUTO] is selected for [IP SETTING].
- Page 42 Mail Setting Click “MAIL” on the left side of HOME. This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor. ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature.
- Page 43 Alert error message list Error number Alert mail Message Explanation Measure * ErrorCode The monitor’s power supply is not Standby power Abnormal Please contact your supplier. 70h ~ 7Fh functioning normally. 80h ~ Fh The cooling fan has stopped. Cooling fan Abnormal Please contact your supplier.
- Page 44 SNMP Setting Click “SNMP” on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. Version: SNMP v1 Authenticated plaintext by community name, not return a confi rmation message of Trap. SNMP v2c Authenticated plaintext by community name, return a confi...
- Page 45 AMX Setting Click “AMX” on the left side of HOME. AMX BEACON Turn on or off for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system. TIP: When using a device that supports AMX Device Discovery, all AMX NetLinx control system will recognize the device and download the appropriate Device Discovery Module from an AMX server.
- Page 46 Name Setting Click “NAME” on the left side of HOME. MONITOR NAME Set a monitor name. The name must be 16 characters or less. The default is model name. HOST NAME Type in the hostname of the network connected to the monitor. Up to 15 alphanumeric characters can be used.
- Page 47 PD List Information Click “PD LIST” on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click “MEMO” on the left side of HOME. Set a title and message.
-
Page 48: Point Zoom
POINT ZOOM Using “SET/POINT ZOOM” button on a remote control allows to enlarge a partial of image. Press CH+/- button to zoom up or down. The image can be expanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifi er. 2 Move magnifi... -
Page 49: Intelligent Wireless Data
INTELLIGENT WIRELESS DATA This function allows to get the data of monitor’s status by wireless communication even while the monitor is off. Some menu of OSD, you can set by this function. NOTE: Sensor position: See page 8 and 9. Please contact your supplier for detailed information. -
Page 50: Features
FullScan Capability: Allows you to use the entire screen area in most resolutions, signifi cantly expanding image size. VESA Standard (FDMIv1) Mounting Interface: Allows you to connect your LCD monitor to any VESA standard (FDMIv1) third party mounting arm or bracket. NEC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in North America. -
Page 51: Troubleshooting
• Check to make sure that a supported mode has been NOTE: As with all personal display devices, NEC selected on the display card or system being used. DISPLAY SOLUTIONS recommends displaying (Please consult display card or system manual to change moving images and using a moving screen saver graphics mode). - Page 52 No Sound • Check to see if audio cable is properly connected. • Check to see if mute is activated. • Check to see if volume is set at minimum. • Check to see if computer supports an audio signal through DisplayPort.
-
Page 53: Specifi Cations - X551Uhd
Specifi cations - X551UHD Product Specifi cations LCD Module 55"/138.78 cm diagonal Pixel Pitch: 0.105 mm Resolution: 3840 x 2160 Color: Over 1073 million colors (depending on display card used) Brightness: 500 cd/m (Max.) @25°C Contrast Ratio: 4000:1 Viewing Angle: 89°... -
Page 54: Specifi Cations - X651Uhd-2
Specifi cations - X651UHD-2 Product Specifi cations LCD Module 65"/163.90 cm diagonal Pixel Pitch: 0.372 mm Resolution: 3840 x 2160 Color: Over 1073 million colors (depending on display card used) Brightness: 450 cd/m (Max.) @25°C Contrast Ratio: 1300:1 Viewing Angle: 89°... -
Page 55: Manufacturer's Recycling And Energy Information
Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-friendly products, and always strive to help defi... - Page 56 WEEE Mark (European Directive 2012/19/EU) Disposing of your used product: In the European Union EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors and electrical accessories, such as signal cables or power cords.